From: Michael Hunold <hunold@linuxtv.org>
The attached patch cleans up my Video4Linux "MXB" driver and the i2c helper
chipset drivers used by that cards.
I ran Lindent on the files and fixed some other coding style violations,
which makes the patch rather big.
But besides the MODULE_PARM => module_param there have been no crucial
changes.
- [V4L] mxb: replace MODULE_PARM with module_param
- [V4L] saa7111: replace MODULE_PARM with module_param
- [V4L] tda9840: replace MODULE_PARM with module_param, re-indent code
with Lindent, remove unnecessary header includes, code simplification
- [V4L] tea6415c: replace MODULE_PARM with module_param, re-indent code
with Lindent, remove unnecessary header includes, code simplification
- [V4L] tea6420: replace MODULE_PARM with module_param, re-indent code
with Lindent, remove unnecessary header includes, code simplification
Signed-off-by: Michael Hunold <hunold@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
---
25-akpm/drivers/media/video/mxb.c | 8
25-akpm/drivers/media/video/saa7111.c | 2
25-akpm/drivers/media/video/tda9840.c | 315 ++++++++++++++-------------------
25-akpm/drivers/media/video/tea6415c.c | 227 +++++++++++------------
25-akpm/drivers/media/video/tea6420.c | 175 ++++++++----------
5 files changed, 338 insertions(+), 389 deletions(-)
diff -puN drivers/media/video/mxb.c~v4l-mxb-driver-and-i2c-helper-cleanup drivers/media/video/mxb.c
--- 25/drivers/media/video/mxb.c~v4l-mxb-driver-and-i2c-helper-cleanup 2004-11-03 23:31:07.670006184 -0800
+++ 25-akpm/drivers/media/video/mxb.c 2004-11-03 23:31:07.681004512 -0800
@@ -1,5 +1,5 @@
/*
- mxb.c - v4l2 driver for the Multimedia eXtension Board
+ mxb - v4l2 driver for the Multimedia eXtension Board
Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de>
@@ -43,12 +43,12 @@ static int mxb_num = 0;
in verden (lower saxony, germany) 4148 is a
channel called "phoenix" */
static int freq = 4148;
-MODULE_PARM(freq,"i");
+module_param(freq, int, 0644);
MODULE_PARM_DESC(freq, "initial frequency the tuner will be tuned to while setup");
static int debug = 0;
-MODULE_PARM(debug,"i");
-MODULE_PARM_DESC(debug, "debug verbosity");
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
#define MXB_INPUTS 4
enum { TUNER, AUX1, AUX3, AUX3_YC };
diff -puN drivers/media/video/saa7111.c~v4l-mxb-driver-and-i2c-helper-cleanup drivers/media/video/saa7111.c
--- 25/drivers/media/video/saa7111.c~v4l-mxb-driver-and-i2c-helper-cleanup 2004-11-03 23:31:07.672005880 -0800
+++ 25-akpm/drivers/media/video/saa7111.c 2004-11-03 23:31:07.682004360 -0800
@@ -60,7 +60,7 @@ MODULE_LICENSE("GPL");
#include <linux/video_decoder.h>
static int debug = 0;
-MODULE_PARM(debug, "i");
+module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
#define dprintk(num, format, args...) \
diff -puN drivers/media/video/tda9840.c~v4l-mxb-driver-and-i2c-helper-cleanup drivers/media/video/tda9840.c
--- 25/drivers/media/video/tda9840.c~v4l-mxb-driver-and-i2c-helper-cleanup 2004-11-03 23:31:07.673005728 -0800
+++ 25-akpm/drivers/media/video/tda9840.c 2004-11-03 23:31:07.684004056 -0800
@@ -1,5 +1,5 @@
/*
- tda9840.h - i2c-driver for the tda9840 by SGS Thomson
+ tda9840 - i2c-driver for the tda9840 by SGS Thomson
Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de>
@@ -8,7 +8,7 @@
For detailed informations download the specifications directly
from SGS Thomson at http://www.st.com
-
+
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
@@ -22,21 +22,19 @@
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
+ */
-#include <linux/version.h>
#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/poll.h>
-#include <linux/slab.h>
+#include <linux/ioctl.h>
#include <linux/i2c.h>
-#include <linux/init.h>
#include "tda9840.h"
-static int debug = 0; /* insmod parameter */
-MODULE_PARM(debug,"i");
-#define dprintk if (debug) printk
+static int debug = 0; /* insmod parameter */
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
+#define dprintk(args...) \
+ do { if (debug) { printk("%s: %s()[%d]: ",__stringify(KBUILD_MODNAME), __FUNCTION__, __LINE__); printk(args); } } while (0)
#define SWITCH 0x00
#define LEVEL_ADJUST 0x02
@@ -44,168 +42,146 @@ MODULE_PARM(debug,"i");
#define TEST 0x04
/* addresses to scan, found only at 0x42 (7-Bit) */
-static unsigned short normal_i2c[] = {I2C_TDA9840, I2C_CLIENT_END};
-static unsigned short normal_i2c_range[] = {I2C_CLIENT_END};
+static unsigned short normal_i2c[] = { I2C_TDA9840, I2C_CLIENT_END };
+static unsigned short normal_i2c_range[] = { I2C_CLIENT_END };
/* magic definition of all other variables and things */
I2C_CLIENT_INSMOD;
+static struct i2c_driver driver;
+static struct i2c_client client_template;
+
/* unique ID allocation */
static int tda9840_id = 0;
-static struct i2c_driver driver;
-
-static int tda9840_command(struct i2c_client *client, unsigned int cmd, void* arg)
+static int command(struct i2c_client *client, unsigned int cmd, void *arg)
{
- int result = 0;
+ int result;
+ int byte = *(int *)arg;
switch (cmd) {
- case TDA9840_SWITCH:
- {
- int byte = *(int*)arg;
-
- dprintk("tda9840.o: TDA9840_SWITCH: 0x%02x\n",byte);
-
- if ( byte != TDA9840_SET_MONO
- && byte != TDA9840_SET_MUTE
- && byte != TDA9840_SET_STEREO
- && byte != TDA9840_SET_LANG1
- && byte != TDA9840_SET_LANG2
- && byte != TDA9840_SET_BOTH
- && byte != TDA9840_SET_BOTH_R
- && byte != TDA9840_SET_EXTERNAL ) {
- return -EINVAL;
- }
-
- if ( 0 != (result = i2c_smbus_write_byte_data(client, SWITCH, byte))) {
- printk("tda9840.o: TDA9840_SWITCH error.\n");
- return -EFAULT;
- }
-
- return 0;
- }
+ case TDA9840_SWITCH:
- case TDA9840_LEVEL_ADJUST:
- {
- int byte = *(int*)arg;
-
- dprintk("tda9840.o: TDA9840_LEVEL_ADJUST: %d\n",byte);
-
- /* check for correct range */
- if ( byte > 25 || byte < -20 )
- return -EINVAL;
-
- /* calculate actual value to set, see specs, page 18 */
- byte /= 5;
- if ( 0 < byte )
- byte += 0x8;
- else
- byte = -byte;
-
- if ( 0 != (result = i2c_smbus_write_byte_data(client, LEVEL_ADJUST, byte))) {
- printk("tda9840.o: TDA9840_LEVEL_ADJUST error.\n");
- return -EFAULT;
- }
-
- return 0;
+ dprintk("TDA9840_SWITCH: 0x%02x\n", byte);
+
+ if (byte != TDA9840_SET_MONO
+ && byte != TDA9840_SET_MUTE
+ && byte != TDA9840_SET_STEREO
+ && byte != TDA9840_SET_LANG1
+ && byte != TDA9840_SET_LANG2
+ && byte != TDA9840_SET_BOTH
+ && byte != TDA9840_SET_BOTH_R
+ && byte != TDA9840_SET_EXTERNAL) {
+ return -EINVAL;
}
- case TDA9840_STEREO_ADJUST:
- {
- int byte = *(int*)arg;
-
- dprintk("tda9840.o: TDA9840_STEREO_ADJUST: %d\n",byte);
-
- /* check for correct range */
- if ( byte > 25 || byte < -24 )
- return -EINVAL;
-
- /* calculate actual value to set */
- byte /= 5;
- if ( 0 < byte )
- byte += 0x20;
- else
- byte = -byte;
-
- if ( 0 != (result = i2c_smbus_write_byte_data(client, STEREO_ADJUST, byte))) {
- printk("tda9840.o: TDA9840_STEREO_ADJUST error.\n");
- return -EFAULT;
- }
-
- return 0;
+ result = i2c_smbus_write_byte_data(client, SWITCH, byte);
+ if (result)
+ dprintk("i2c_smbus_write_byte() failed, ret:%d\n", result);
+ break;
+
+ case TDA9840_LEVEL_ADJUST:
+
+ dprintk("TDA9840_LEVEL_ADJUST: %d\n", byte);
+
+ /* check for correct range */
+ if (byte > 25 || byte < -20)
+ return -EINVAL;
+
+ /* calculate actual value to set, see specs, page 18 */
+ byte /= 5;
+ if (0 < byte)
+ byte += 0x8;
+ else
+ byte = -byte;
+
+ result = i2c_smbus_write_byte_data(client, LEVEL_ADJUST, byte);
+ if (result)
+ dprintk("i2c_smbus_write_byte() failed, ret:%d\n", result);
+ break;
+
+ case TDA9840_STEREO_ADJUST:
+
+ dprintk("TDA9840_STEREO_ADJUST: %d\n", byte);
+
+ /* check for correct range */
+ if (byte > 25 || byte < -24)
+ return -EINVAL;
+
+ /* calculate actual value to set */
+ byte /= 5;
+ if (0 < byte)
+ byte += 0x20;
+ else
+ byte = -byte;
+
+ result = i2c_smbus_write_byte_data(client, STEREO_ADJUST, byte);
+ if (result)
+ dprintk("i2c_smbus_write_byte() failed, ret:%d\n", result);
+ break;
+
+ case TDA9840_DETECT:
+
+ byte = i2c_smbus_read_byte_data(client, STEREO_ADJUST);
+ if (byte == -1) {
+ dprintk("i2c_smbus_read_byte_data() failed\n");
+ return -EIO;
}
- case TDA9840_DETECT:
- {
- int byte = 0x0;
-
- if ( -1 == (byte = i2c_smbus_read_byte_data(client, STEREO_ADJUST))) {
- printk("tda9840.o: TDA9840_DETECT error while reading.\n");
- return -EFAULT;
- }
-
- if( 0 != (byte & 0x80)) {
- dprintk("tda9840.o: TDA9840_DETECT, register contents invalid.\n");
- return -EFAULT;
- }
+ if (0 != (byte & 0x80)) {
+ dprintk("TDA9840_DETECT: register contents invalid\n");
+ return -EINVAL;
+ }
- dprintk("tda9840.o: TDA9840_DETECT, result: 0x%02x (original byte)\n",byte);
+ dprintk("TDA9840_DETECT: byte: 0x%02x\n", byte);
+ return ((byte & 0x60) >> 5);
- return ((byte & 0x60) >> 5);
- }
+ case TDA9840_TEST:
+ dprintk("TDA9840_TEST: 0x%02x\n", byte);
- case TDA9840_TEST:
- {
- int byte = *(int*)arg;
-
- dprintk("tda9840.o: TDA9840_TEST: 0x%02x\n",byte);
-
- /* mask out irrelevant bits */
- byte &= 0x3;
-
- if ( 0 != (result = i2c_smbus_write_byte_data(client, TEST, byte))) {
- printk("tda9840.o: TDA9840_TEST error.\n");
- return -EFAULT;
- }
-
- return 0;
- }
+ /* mask out irrelevant bits */
+ byte &= 0x3;
- default:
- return -ENOIOCTLCMD;
+ result = i2c_smbus_write_byte_data(client, TEST, byte);
+ if (result)
+ dprintk("i2c_smbus_write_byte() failed, ret:%d\n", result);
+ break;
+ default:
+ return -ENOIOCTLCMD;
}
+ if (result)
+ return -EIO;
+
return 0;
}
-static int tda9840_detect(struct i2c_adapter *adapter, int address, int kind)
+static int detect(struct i2c_adapter *adapter, int address, int kind)
{
- struct i2c_client *client;
+ struct i2c_client *client;
int result = 0;
int byte = 0x0;
-
+
/* let's see whether this adapter can support what we need */
- if ( 0 == i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA|I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) {
+ if (0 == i2c_check_functionality(adapter,
+ I2C_FUNC_SMBUS_READ_BYTE_DATA |
+ I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) {
return 0;
}
/* allocate memory for client structure */
client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (0 == client) {
- printk("tda9840.o: not enough kernel memory.\n");
+ if (0 == client) {
+ printk("not enough kernel memory\n");
return -ENOMEM;
}
- memset(client, 0, sizeof(struct i2c_client));
-
+
/* fill client structure */
- sprintf(client->name,"tda9840 (0x%02x)", address);
+ memcpy(client, &client_template, sizeof(struct i2c_client));
client->id = tda9840_id++;
- client->flags = 0;
client->addr = address;
client->adapter = adapter;
- client->driver = &driver;
- i2c_set_clientdata(client, NULL);
/* tell the i2c layer a new client has arrived */
if (0 != (result = i2c_attach_client(client))) {
@@ -215,71 +191,64 @@ static int tda9840_detect(struct i2c_ada
/* set initial values for level & stereo - adjustment, mode */
byte = 0;
- if ( 0 != (result = tda9840_command(client, TDA9840_LEVEL_ADJUST, &byte))) {
- printk("tda9840.o: could not initialize ic #1. continuing anyway. (result:%d)\n",result);
- }
-
- if ( 0 != (result = tda9840_command(client, TDA9840_STEREO_ADJUST, &byte))) {
- printk("tda9840.o: could not initialize ic #2. continuing anyway. (result:%d)\n",result);
- }
-
+ result = command(client, TDA9840_LEVEL_ADJUST, &byte);
+ result += command(client, TDA9840_STEREO_ADJUST, &byte);
byte = TDA9840_SET_MONO;
- if ( 0 != (result = tda9840_command(client, TDA9840_SWITCH, &byte))) {
- printk("tda9840.o: could not initialize ic #3. continuing anyway. (result:%d)\n",result);
- }
-
- printk("tda9840.o: detected @ 0x%02x on adapter %s\n",2*address,&client->adapter->name[0]);
+ result = command(client, TDA9840_SWITCH, &byte);
+ if (result) {
+ dprintk("could not initialize tda9840\n");
+ return -ENODEV;
+ }
+ printk("tda9840: detected @ 0x%02x on adapter %s\n", address, &client->adapter->name[0]);
return 0;
}
-static int tda9840_attach(struct i2c_adapter *adapter)
+static int attach(struct i2c_adapter *adapter)
{
/* let's see whether this is a know adapter we can attach to */
- if( adapter->id != I2C_ALGO_SAA7146 ) {
- dprintk("tda9840.o: refusing to probe on unknown adapter [name='%s',id=0x%x]\n",adapter->name,adapter->id);
+ if (adapter->id != I2C_ALGO_SAA7146) {
+ dprintk("refusing to probe on unknown adapter [name='%s',id=0x%x]\n", adapter->name, adapter->id);
return -ENODEV;
}
- return i2c_probe(adapter,&addr_data,&tda9840_detect);
+ return i2c_probe(adapter, &addr_data, &detect);
}
-static int tda9840_detach(struct i2c_client *client)
+static int detach(struct i2c_client *client)
{
- int err = 0;
-
- if ( 0 != (err = i2c_detach_client(client))) {
- printk("tda9840.o: Client deregistration failed, client not detached.\n");
- return err;
- }
-
+ int ret = i2c_detach_client(client);
kfree(client);
-
- return 0;
+ return ret;
}
static struct i2c_driver driver = {
- .owner = THIS_MODULE,
- .name = "tda9840 driver",
- .id = I2C_DRIVERID_TDA9840,
- .flags = I2C_DF_NOTIFY,
- .attach_adapter = tda9840_attach,
- .detach_client = tda9840_detach,
- .command = tda9840_command,
+ .owner = THIS_MODULE,
+ .name = "tda9840",
+ .id = I2C_DRIVERID_TDA9840,
+ .flags = I2C_DF_NOTIFY,
+ .attach_adapter = attach,
+ .detach_client = detach,
+ .command = command,
+};
+
+static struct i2c_client client_template = {
+ I2C_DEVNAME("tda9840"),
+ .driver = &driver,
};
-static int __init tda9840_init_module(void)
+static int __init this_module_init(void)
{
- return i2c_add_driver(&driver);
+ return i2c_add_driver(&driver);
}
-static void __exit tda9840_cleanup_module(void)
+static void __exit this_module_exit(void)
{
- i2c_del_driver(&driver);
+ i2c_del_driver(&driver);
}
-module_init(tda9840_init_module);
-module_exit(tda9840_cleanup_module);
+module_init(this_module_init);
+module_exit(this_module_exit);
MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
MODULE_DESCRIPTION("tda9840 driver");
diff -puN drivers/media/video/tea6415c.c~v4l-mxb-driver-and-i2c-helper-cleanup drivers/media/video/tea6415c.c
--- 25/drivers/media/video/tea6415c.c~v4l-mxb-driver-and-i2c-helper-cleanup 2004-11-03 23:31:07.675005424 -0800
+++ 25-akpm/drivers/media/video/tea6415c.c 2004-11-03 23:31:07.686003752 -0800
@@ -1,5 +1,5 @@
/*
- tea6415c.h - i2c-driver for the tea6415c by SGS Thomson
+ tea6415c - i2c-driver for the tea6415c by SGS Thomson
Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de>
@@ -7,10 +7,10 @@
with 8 inputs and 6 outputs.
It is cascadable, i.e. it can be found at the addresses
0x86 and 0x06 on the i2c-bus.
-
+
For detailed informations download the specifications directly
from SGS Thomson at http://www.st.com
-
+
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License vs published by
the Free Software Foundation; either version 2 of the License, or
@@ -24,61 +24,58 @@
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mvss Ave, Cambridge, MA 02139, USA.
- */
+ */
-#include <linux/version.h>
#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/poll.h>
-#include <linux/slab.h>
+#include <linux/ioctl.h>
#include <linux/i2c.h>
-#include <linux/init.h>
+
#include "tea6415c.h"
-static int debug = 0; /* insmod parameter */
-MODULE_PARM(debug,"i");
-#define dprintk if (debug) printk
+static int debug = 0; /* insmod parameter */
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
+#define dprintk(args...) \
+ do { if (debug) { printk("%s: %s()[%d]: ",__stringify(KBUILD_MODNAME), __FUNCTION__, __LINE__); printk(args); } } while (0)
#define TEA6415C_NUM_INPUTS 8
#define TEA6415C_NUM_OUTPUTS 6
/* addresses to scan, found only at 0x03 and/or 0x43 (7-bit) */
-static unsigned short normal_i2c[] = {I2C_TEA6415C_1, I2C_TEA6415C_2, I2C_CLIENT_END};
-static unsigned short normal_i2c_range[] = {I2C_CLIENT_END};
+static unsigned short normal_i2c[] = { I2C_TEA6415C_1, I2C_TEA6415C_2, I2C_CLIENT_END };
+static unsigned short normal_i2c_range[] = { I2C_CLIENT_END };
/* magic definition of all other variables and things */
I2C_CLIENT_INSMOD;
static struct i2c_driver driver;
+static struct i2c_client client_template;
/* unique ID allocation */
static int tea6415c_id = 0;
/* this function is called by i2c_probe */
-static int tea6415c_detect(struct i2c_adapter *adapter, int address, int kind)
+static int detect(struct i2c_adapter *adapter, int address, int kind)
{
- struct i2c_client *client = NULL;
+ struct i2c_client *client = NULL;
int err = 0;
/* let's see whether this adapter can support what we need */
- if ( 0 == i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE)) {
+ if (0 == i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE)) {
return 0;
}
/* allocate memory for client structure */
client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (0 == client) {
+ if (0 == client) {
return -ENOMEM;
}
- memset(client, 0, sizeof(struct i2c_client));
/* fill client structure */
- sprintf(client->name,"tea6415c (0x%02x)", address);
+ memcpy(client, &client_template, sizeof(struct i2c_client));
client->id = tea6415c_id++;
- client->flags = 0;
client->addr = address;
client->adapter = adapter;
- client->driver = &driver;
/* tell the i2c layer a new client has arrived */
if (0 != (err = i2c_attach_client(client))) {
@@ -86,151 +83,145 @@ static int tea6415c_detect(struct i2c_ad
return err;
}
- printk("tea6415c.o: detected @ 0x%02x on adapter %s\n",2*address,&client->adapter->name[0]);
+ printk("tea6415c: detected @ 0x%02x on adapter %s\n", address, &client->adapter->name[0]);
return 0;
}
-static int tea6415c_attach(struct i2c_adapter *adapter)
+static int attach(struct i2c_adapter *adapter)
{
/* let's see whether this is a know adapter we can attach to */
- if( adapter->id != I2C_ALGO_SAA7146 ) {
- dprintk("tea6415c.o: refusing to probe on unknown adapter [name='%s',id=0x%x]\n",adapter->name,adapter->id);
+ if (adapter->id != I2C_ALGO_SAA7146) {
+ dprintk("refusing to probe on unknown adapter [name='%s',id=0x%x]\n", adapter->name, adapter->id);
return -ENODEV;
}
- return i2c_probe(adapter,&addr_data,&tea6415c_detect);
+ return i2c_probe(adapter, &addr_data, &detect);
}
-static int tea6415c_detach(struct i2c_client *client)
+static int detach(struct i2c_client *client)
{
- int err = 0;
-
- if ( 0 != (err = i2c_detach_client(client))) {
- printk("tea6415c.o: Client deregistration failed, client not detached.\n");
- return err;
- }
-
+ int ret = i2c_detach_client(client);
kfree(client);
-
- return 0;
+ return ret;
}
/* makes a connection between the input-pin 'i' and the output-pin 'o'
for the tea6415c-client 'client' */
-static int tea6415c_switch(struct i2c_client *client, int i, int o)
+static int switch_matrix(struct i2c_client *client, int i, int o)
{
- u8 byte = 0;
+ u8 byte = 0;
+ int ret;
- dprintk("tea6415c.o: tea6415c_switch: adr:0x%02x, i:%d, o:%d\n", client->addr, i, o);
-
+ dprintk("adr:0x%02x, i:%d, o:%d\n", client->addr, i, o);
+
/* check if the pins are valid */
- if ( 0 == (( 1 == i || 3 == i || 5 == i || 6 == i || 8 == i || 10 == i || 20 == i || 11 == i ) &&
- (18 == o || 17 == o || 16 == o || 15 == o || 14 == o || 13 == o )))
+ if (0 == ((1 == i || 3 == i || 5 == i || 6 == i || 8 == i || 10 == i || 20 == i || 11 == i)
+ && (18 == o || 17 == o || 16 == o || 15 == o || 14 == o || 13 == o)))
return -1;
/* to understand this, have a look at the tea6415c-specs (p.5) */
- switch(o) {
- case 18:
- byte = 0x00;
- break;
- case 14:
- byte = 0x20;
- break;
- case 16:
- byte = 0x10;
- break;
- case 17:
- byte = 0x08;
- break;
- case 15:
- byte = 0x18;
- break;
- case 13:
- byte = 0x28;
- break;
+ switch (o) {
+ case 18:
+ byte = 0x00;
+ break;
+ case 14:
+ byte = 0x20;
+ break;
+ case 16:
+ byte = 0x10;
+ break;
+ case 17:
+ byte = 0x08;
+ break;
+ case 15:
+ byte = 0x18;
+ break;
+ case 13:
+ byte = 0x28;
+ break;
};
-
- switch(i) {
- case 5:
- byte |= 0x00;
- break;
- case 8:
- byte |= 0x04;
- break;
- case 3:
- byte |= 0x02;
- break;
- case 20:
- byte |= 0x06;
- break;
- case 6:
- byte |= 0x01;
- break;
- case 10:
- byte |= 0x05;
- break;
- case 1:
- byte |= 0x03;
- break;
- case 11:
- byte |= 0x07;
- break;
+
+ switch (i) {
+ case 5:
+ byte |= 0x00;
+ break;
+ case 8:
+ byte |= 0x04;
+ break;
+ case 3:
+ byte |= 0x02;
+ break;
+ case 20:
+ byte |= 0x06;
+ break;
+ case 6:
+ byte |= 0x01;
+ break;
+ case 10:
+ byte |= 0x05;
+ break;
+ case 1:
+ byte |= 0x03;
+ break;
+ case 11:
+ byte |= 0x07;
+ break;
};
- if ( 0 != i2c_smbus_write_byte(client,byte)) {
- dprintk("tea6415c.o: tea6415c_switch: could not write to tea6415c\n");
- return -1;
+ ret = i2c_smbus_write_byte(client, byte);
+ if (ret) {
+ dprintk("i2c_smbus_write_byte() failed, ret:%d\n", ret);
+ return -EIO;
}
- return 0;
+ return ret;
}
-static int tea6415c_command(struct i2c_client *client, unsigned int cmd, void* arg)
+static int command(struct i2c_client *client, unsigned int cmd, void *arg)
{
- struct tea6415c_multiplex *v = (struct tea6415c_multiplex*)arg;
+ struct tea6415c_multiplex *v = (struct tea6415c_multiplex *)arg;
int result = 0;
switch (cmd) {
- case TEA6415C_SWITCH: {
- result = tea6415c_switch(client,v->in,v->out);
- break;
- }
- default: {
- return -ENOIOCTLCMD;
- }
+ case TEA6415C_SWITCH:
+ result = switch_matrix(client, v->in, v->out);
+ break;
+ default:
+ return -ENOIOCTLCMD;
}
- if ( 0 != result )
- return result;
-
- return 0;
+ return result;
}
static struct i2c_driver driver = {
- .owner = THIS_MODULE,
- .name = "tea6415c driver",
- .id = I2C_DRIVERID_TEA6415C,
- .flags = I2C_DF_NOTIFY,
- .attach_adapter = tea6415c_attach,
- .detach_client = tea6415c_detach,
- .command = tea6415c_command,
+ .owner = THIS_MODULE,
+ .name = "tea6415c",
+ .id = I2C_DRIVERID_TEA6415C,
+ .flags = I2C_DF_NOTIFY,
+ .attach_adapter = attach,
+ .detach_client = detach,
+ .command = command,
+};
+
+static struct i2c_client client_template = {
+ I2C_DEVNAME("tea6415c"),
+ .driver = &driver,
};
-static int __init tea6415c_init_module(void)
+static int __init this_module_init(void)
{
return i2c_add_driver(&driver);
}
-static void __exit tea6415c_cleanup_module(void)
+static void __exit this_module_exit(void)
{
- i2c_del_driver(&driver);
+ i2c_del_driver(&driver);
}
-module_init(tea6415c_init_module);
-module_exit(tea6415c_cleanup_module);
+module_init(this_module_init);
+module_exit(this_module_exit);
MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
MODULE_DESCRIPTION("tea6415c driver");
MODULE_LICENSE("GPL");
-
diff -puN drivers/media/video/tea6420.c~v4l-mxb-driver-and-i2c-helper-cleanup drivers/media/video/tea6420.c
--- 25/drivers/media/video/tea6420.c~v4l-mxb-driver-and-i2c-helper-cleanup 2004-11-03 23:31:07.677005120 -0800
+++ 25-akpm/drivers/media/video/tea6420.c 2004-11-03 23:31:07.687003600 -0800
@@ -1,5 +1,5 @@
/*
- tea6420.o - i2c-driver for the tea6420 by SGS Thomson
+ tea6420 - i2c-driver for the tea6420 by SGS Thomson
Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de>
@@ -7,10 +7,10 @@
4 stereo outputs and gain control for each output.
It is cascadable, i.e. it can be found at the adresses 0x98
and 0x9a on the i2c-bus.
-
+
For detailed informations download the specifications directly
from SGS Thomson at http://www.st.com
-
+
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
@@ -24,30 +24,29 @@
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
+ */
-#include <linux/version.h>
#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/poll.h>
-#include <linux/slab.h>
+#include <linux/ioctl.h>
#include <linux/i2c.h>
-#include <linux/init.h>
#include "tea6420.h"
-static int debug = 0; /* insmod parameter */
-MODULE_PARM(debug,"i");
-#define dprintk if (debug) printk
+static int debug = 0; /* insmod parameter */
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
+#define dprintk(args...) \
+ do { if (debug) { printk("%s: %s()[%d]: ",__stringify(KBUILD_MODNAME), __FUNCTION__, __LINE__); printk(args); } } while (0)
/* addresses to scan, found only at 0x4c and/or 0x4d (7-Bit) */
-static unsigned short normal_i2c[] = {I2C_TEA6420_1, I2C_TEA6420_2, I2C_CLIENT_END};
-static unsigned short normal_i2c_range[] = {I2C_CLIENT_END};
+static unsigned short normal_i2c[] = { I2C_TEA6420_1, I2C_TEA6420_2, I2C_CLIENT_END };
+static unsigned short normal_i2c_range[] = { I2C_CLIENT_END };
/* magic definition of all other variables and things */
I2C_CLIENT_INSMOD;
static struct i2c_driver driver;
+static struct i2c_client client_template;
/* unique ID allocation */
static int tea6420_id = 0;
@@ -56,39 +55,37 @@ static int tea6420_id = 0;
with gain 'g' for the tea6420-client 'client' (note: i = 6 means 'mute') */
static int tea6420_switch(struct i2c_client *client, int i, int o, int g)
{
- u8 byte = 0;
-
- int result = 0;
-
- dprintk("tea6420.o: tea6420_switch: adr:0x%02x, i:%d, o:%d, g:%d\n",client->addr,i,o,g);
+ u8 byte = 0;
+ int ret;
+
+ dprintk("adr:0x%02x, i:%d, o:%d, g:%d\n", client->addr, i, o, g);
/* check if the paramters are valid */
- if ( i < 1 || i > 6 || o < 1 || o > 4 || g < 0 || g > 6 || g%2 != 0 )
+ if (i < 1 || i > 6 || o < 1 || o > 4 || g < 0 || g > 6 || g % 2 != 0)
return -1;
- byte = ((o-1)<<5);
- byte |= (i-1);
+ byte = ((o - 1) << 5);
+ byte |= (i - 1);
/* to understand this, have a look at the tea6420-specs (p.5) */
- switch(g) {
- case 0:
- byte |= (3<<3);
- break;
- case 2:
- byte |= (2<<3);
- break;
- case 4:
- byte |= (1<<3);
- break;
- case 6:
- break;
- }
-
- /* fixme?: 1 != ... => 0 != */
- if ( 0 != (result = i2c_smbus_write_byte(client,byte))) {
- printk("tea6402:%d\n",result);
- dprintk(KERN_ERR "tea6420.o: could not switch, result:%d\n",result);
- return -EFAULT;
+ switch (g) {
+ case 0:
+ byte |= (3 << 3);
+ break;
+ case 2:
+ byte |= (2 << 3);
+ break;
+ case 4:
+ byte |= (1 << 3);
+ break;
+ case 6:
+ break;
+ }
+
+ ret = i2c_smbus_write_byte(client, byte);
+ if (ret) {
+ dprintk("i2c_smbus_write_byte() failed, ret:%d\n", ret);
+ return -EIO;
}
return 0;
@@ -97,29 +94,26 @@ static int tea6420_switch(struct i2c_cli
/* this function is called by i2c_probe */
static int tea6420_detect(struct i2c_adapter *adapter, int address, int kind)
{
- struct i2c_client *client;
+ struct i2c_client *client;
int err = 0, i = 0;
/* let's see whether this adapter can support what we need */
- if ( 0 == i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE)) {
+ if (0 == i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE)) {
return 0;
}
/* allocate memory for client structure */
client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (0 == client) {
+ if (0 == client) {
return -ENOMEM;
}
- memset(client, 0x0, sizeof(struct i2c_client));
+ memset(client, 0x0, sizeof(struct i2c_client));
/* fill client structure */
- sprintf(client->name,"tea6420 (0x%02x)", address);
+ memcpy(client, &client_template, sizeof(struct i2c_client));
client->id = tea6420_id++;
- client->flags = 0;
client->addr = address;
client->adapter = adapter;
- client->driver = &driver;
- i2c_set_clientdata(client, NULL);
/* tell the i2c layer a new client has arrived */
if (0 != (err = i2c_attach_client(client))) {
@@ -129,86 +123,81 @@ static int tea6420_detect(struct i2c_ada
/* set initial values: set "mute"-input to all outputs at gain 0 */
err = 0;
- for(i = 1; i < 5; i++) {
+ for (i = 1; i < 5; i++) {
err += tea6420_switch(client, 6, i, 0);
}
- if( 0 != err) {
- printk("tea6420.o: could not initialize chipset. continuing anyway.\n");
+ if (err) {
+ dprintk("could not initialize tea6420\n");
+ kfree(client);
+ return -ENODEV;
}
-
- printk("tea6420.o: detected @ 0x%02x on adapter %s\n",2*address,&client->adapter->name[0]);
+
+ printk("tea6420: detected @ 0x%02x on adapter %s\n", address, &client->adapter->name[0]);
return 0;
}
-static int tea6420_attach(struct i2c_adapter *adapter)
+static int attach(struct i2c_adapter *adapter)
{
/* let's see whether this is a know adapter we can attach to */
- if( adapter->id != I2C_ALGO_SAA7146 ) {
- dprintk("tea6420.o: refusing to probe on unknown adapter [name='%s',id=0x%x]\n",adapter->name,adapter->id);
+ if (adapter->id != I2C_ALGO_SAA7146) {
+ dprintk("refusing to probe on unknown adapter [name='%s',id=0x%x]\n", adapter->name, adapter->id);
return -ENODEV;
}
- return i2c_probe(adapter,&addr_data,&tea6420_detect);
+ return i2c_probe(adapter, &addr_data, &tea6420_detect);
}
-static int tea6420_detach(struct i2c_client *client)
+static int detach(struct i2c_client *client)
{
- int err = 0;
-
- if ( 0 != (err = i2c_detach_client(client))) {
- printk("tea6420.o: Client deregistration failed, client not detached.\n");
- return err;
- }
-
+ int ret = i2c_detach_client(client);
kfree(client);
-
- return 0;
+ return ret;
}
-static int tea6420_command(struct i2c_client *client, unsigned int cmd, void* arg)
+static int command(struct i2c_client *client, unsigned int cmd, void *arg)
{
- struct tea6420_multiplex *a = (struct tea6420_multiplex*)arg;
+ struct tea6420_multiplex *a = (struct tea6420_multiplex *)arg;
int result = 0;
switch (cmd) {
- case TEA6420_SWITCH: {
- result = tea6420_switch(client,a->in,a->out,a->gain);
- break;
- }
- default: {
- return -ENOIOCTLCMD;
- }
+ case TEA6420_SWITCH:
+ result = tea6420_switch(client, a->in, a->out, a->gain);
+ break;
+ default:
+ return -ENOIOCTLCMD;
}
- if ( 0 != result )
- return result;
-
- return 0;
+ return result;
}
static struct i2c_driver driver = {
- .owner = THIS_MODULE,
- .name = "tea6420 driver",
- .id = I2C_DRIVERID_TEA6420,
- .flags = I2C_DF_NOTIFY,
- .attach_adapter = tea6420_attach,
- .detach_client = tea6420_detach,
- .command = tea6420_command,
+ .owner = THIS_MODULE,
+ .name = "tea6420",
+ .id = I2C_DRIVERID_TEA6420,
+ .flags = I2C_DF_NOTIFY,
+ .attach_adapter = attach,
+ .detach_client = detach,
+ .command = command,
+};
+
+static struct i2c_client client_template = {
+ I2C_DEVNAME("tea6420"),
+ .driver = &driver,
};
-static int __init tea6420_init_module(void)
+static int __init this_module_init(void)
{
return i2c_add_driver(&driver);
}
-static void __exit tea6420_cleanup_module(void)
+static void __exit this_module_exit(void)
{
- i2c_del_driver(&driver);
+ i2c_del_driver(&driver);
}
-module_init(tea6420_init_module);
-module_exit(tea6420_cleanup_module);
+module_init(this_module_init);
+module_exit(this_module_exit);
MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
MODULE_DESCRIPTION("tea6420 driver");
_