From: Guido Guenther <agx@sigxcpu.org>,
Lars Munch <lars@segv.dk>
Skip PHY selection on Allied Telesyn 2701FX, it looses the link otherwise.
Fix up the AT 2701 as well.
Signed-Off-By: Guido Guenther <agx@sigxcpu.org>
Cc: Don Fry <brazilnut@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
---
25-akpm/drivers/net/pcnet32.c | 47 ++++++++++++++++++++++++----------------
25-akpm/include/linux/pci_ids.h | 5 ++++
2 files changed, 34 insertions(+), 18 deletions(-)
diff -puN drivers/net/pcnet32.c~pcnet32-79c976-with-fiber-optic drivers/net/pcnet32.c
--- 25/drivers/net/pcnet32.c~pcnet32-79c976-with-fiber-optic 2005-01-10 21:14:17.543907888 -0800
+++ 25-akpm/drivers/net/pcnet32.c 2005-01-10 21:14:17.550906824 -0800
@@ -1429,25 +1429,36 @@ pcnet32_open(struct net_device *dev)
val |= 0x10;
lp->a.write_csr (ioaddr, 124, val);
- /* 24 Jun 2004 according AMD, in order to change the PHY,
- * DANAS (or DISPM for 79C976) must be set; then select the speed,
- * duplex, and/or enable auto negotiation, and clear DANAS */
- if (lp->mii && !(lp->options & PCNET32_PORT_ASEL)) {
- lp->a.write_bcr(ioaddr, 32, lp->a.read_bcr(ioaddr, 32) | 0x0080);
- /* disable Auto Negotiation, set 10Mpbs, HD */
- val = lp->a.read_bcr(ioaddr, 32) & ~0xb8;
- if (lp->options & PCNET32_PORT_FD)
- val |= 0x10;
- if (lp->options & PCNET32_PORT_100)
- val |= 0x08;
- lp->a.write_bcr (ioaddr, 32, val);
+ /* Allied Telesyn AT 2700/2701 FX looses the link, so skip that */
+ if (lp->pci_dev->subsystem_vendor == PCI_VENDOR_ID_AT &&
+ (lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX ||
+ lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) {
+ printk(KERN_DEBUG "pcnet32: Skipping PHY selection.\n");
} else {
- if (lp->options & PCNET32_PORT_ASEL) {
- lp->a.write_bcr(ioaddr, 32, lp->a.read_bcr(ioaddr, 32) | 0x0080);
- /* enable auto negotiate, setup, disable fd */
- val = lp->a.read_bcr(ioaddr, 32) & ~0x98;
- val |= 0x20;
- lp->a.write_bcr(ioaddr, 32, val);
+ /*
+ * 24 Jun 2004 according AMD, in order to change the PHY,
+ * DANAS (or DISPM for 79C976) must be set; then select the speed,
+ * duplex, and/or enable auto negotiation, and clear DANAS
+ */
+ if (lp->mii && !(lp->options & PCNET32_PORT_ASEL)) {
+ lp->a.write_bcr(ioaddr, 32,
+ lp->a.read_bcr(ioaddr, 32) | 0x0080);
+ /* disable Auto Negotiation, set 10Mpbs, HD */
+ val = lp->a.read_bcr(ioaddr, 32) & ~0xb8;
+ if (lp->options & PCNET32_PORT_FD)
+ val |= 0x10;
+ if (lp->options & PCNET32_PORT_100)
+ val |= 0x08;
+ lp->a.write_bcr (ioaddr, 32, val);
+ } else {
+ if (lp->options & PCNET32_PORT_ASEL) {
+ lp->a.write_bcr(ioaddr, 32,
+ lp->a.read_bcr(ioaddr, 32) | 0x0080);
+ /* enable auto negotiate, setup, disable fd */
+ val = lp->a.read_bcr(ioaddr, 32) & ~0x98;
+ val |= 0x20;
+ lp->a.write_bcr(ioaddr, 32, val);
+ }
}
}
diff -puN include/linux/pci_ids.h~pcnet32-79c976-with-fiber-optic include/linux/pci_ids.h
--- 25/include/linux/pci_ids.h~pcnet32-79c976-with-fiber-optic 2005-01-10 21:14:17.545907584 -0800
+++ 25-akpm/include/linux/pci_ids.h 2005-01-10 21:14:17.552906520 -0800
@@ -1651,6 +1651,11 @@
#define PCI_DEVICE_ID_OPTIBASE_VPLEXCC 0x2120
#define PCI_DEVICE_ID_OPTIBASE_VQUEST 0x2130
+/* Allied Telesyn */
+#define PCI_VENDOR_ID_AT 0x1259
+#define PCI_SUBDEVICE_ID_AT_2700FX 0x2701
+#define PCI_SUBDEVICE_ID_AT_2701FX 0x2703
+
#define PCI_VENDOR_ID_ESS 0x125d
#define PCI_DEVICE_ID_ESS_ESS1968 0x1968
#define PCI_DEVICE_ID_ESS_AUDIOPCI 0x1969
_