From: Tom Rini <trini@kernel.crashing.org> The following adds support for Freescale's PQ2FADS board to the kernel. (The 'real' changes required for the board are in the ethernet driver, which needs a massive sync-up with mainline as I've been holding out for a better, rewritten one from the Freescale folks, who're waiting for the PHY lib patch sent to the net-dev list to get ack'd) Signed-off-by: Tom Rini <trini@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> --- 25-akpm/arch/ppc/Kconfig | 8 +++++++- 25-akpm/arch/ppc/platforms/pq2ads.h | 2 ++ 25-akpm/include/asm-ppc/mpc8260.h | 2 +- 3 files changed, 10 insertions(+), 2 deletions(-) diff -puN arch/ppc/Kconfig~ppc32-add-freescale-pq2fads-support arch/ppc/Kconfig --- 25/arch/ppc/Kconfig~ppc32-add-freescale-pq2fads-support Wed Jan 12 16:38:53 2005 +++ 25-akpm/arch/ppc/Kconfig Wed Jan 12 16:38:53 2005 @@ -623,6 +623,12 @@ config TQM8260 config ADS8272 bool "ADS8272" +config PQ2FADS + bool "Freescale-PQ2FADS" + help + Select PQ2FADS if you wish to configure for a Freescale + PQ2FADS board (-VR or -ZU). + config LITE5200 bool "Freescale LITE5200 / (IceCube)" select PPC_MPC52xx @@ -655,7 +661,7 @@ config PPC_MPC52xx config 8260 bool "CPM2 Support" if WILLOW depends on 6xx - default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx + default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS help The MPC8260 is a typical embedded CPU made by Motorola. Selecting this option means that you wish to build a kernel for a machine with diff -puN arch/ppc/platforms/pq2ads.h~ppc32-add-freescale-pq2fads-support arch/ppc/platforms/pq2ads.h --- 25/arch/ppc/platforms/pq2ads.h~ppc32-add-freescale-pq2fads-support Wed Jan 12 16:38:53 2005 +++ 25-akpm/arch/ppc/platforms/pq2ads.h Wed Jan 12 16:38:53 2005 @@ -40,6 +40,8 @@ #define BCSR1_FETH_RST ((uint)0x04000000) /* 0 == reset */ #define BCSR1_RS232_EN1 ((uint)0x02000000) /* 0 == enable */ #define BCSR1_RS232_EN2 ((uint)0x01000000) /* 0 == enable */ +#define BCSR3_FETHIEN2 ((uint)0x10000000) /* 0 == enable */ +#define BCSR3_FETH2_RST ((uint)0x80000000) /* 0 == reset */ #define PHY_INTERRUPT SIU_INT_IRQ7 diff -puN include/asm-ppc/mpc8260.h~ppc32-add-freescale-pq2fads-support include/asm-ppc/mpc8260.h --- 25/include/asm-ppc/mpc8260.h~ppc32-add-freescale-pq2fads-support Wed Jan 12 16:38:53 2005 +++ 25-akpm/include/asm-ppc/mpc8260.h Wed Jan 12 16:38:53 2005 @@ -36,7 +36,7 @@ #include <platforms/tqm8260.h> #endif -#ifdef CONFIG_PQ2ADS +#if defined(CONFIG_PQ2ADS) || defined (CONFIG_PQ2FADS) #include <platforms/pq2ads.h> #endif _