From: Andrey Panin <pazke@donpac.ru>
Add support for SIIG Quartet Serial card. This card has Oxford
Semiconducor 16954 quad UART which is clocked by 10x faster (18.432 MHz)
quartz.
Cc: <rmk+serial@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
---
drivers/serial/8250_pci.c | 14 ++++++++++++++
include/linux/pci_ids.h | 2 ++
2 files changed, 16 insertions(+)
diff -puN drivers/serial/8250_pci.c~serial-add-siig-quartet-support drivers/serial/8250_pci.c
--- 25/drivers/serial/8250_pci.c~serial-add-siig-quartet-support Tue Jun 28 15:56:24 2005
+++ 25-akpm/drivers/serial/8250_pci.c Tue Jun 28 15:56:24 2005
@@ -389,6 +389,9 @@ static void __devexit sbs_exit(struct pc
* - 10x cards have control registers in IO and/or memory space;
* - 20x cards have control registers in standard PCI configuration space.
*
+ * There are also Quartet Serial cards which use Oxford Semiconductor
+ * 16954 quad UART PCI chip clocked by 18.432 MHz quartz.
+ *
* Note: some SIIG cards are probed by the parport_serial object.
*/
@@ -1027,6 +1030,8 @@ enum pci_board_num_t {
pbn_b0_2_1130000,
pbn_b0_4_921600,
+ pbn_b0_4_1152000,
+
pbn_b0_bt_1_115200,
pbn_b0_bt_2_115200,
pbn_b0_bt_8_115200,
@@ -1165,6 +1170,12 @@ static struct pci_board pci_boards[] __d
.base_baud = 921600,
.uart_offset = 8,
},
+ [pbn_b0_4_1152000] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 1152000,
+ .uart_offset = 8,
+ },
[pbn_b0_bt_1_115200] = {
.flags = FL_BASE0|FL_BASE_BARS,
@@ -1985,6 +1996,9 @@ static struct pci_device_id serial_pci_t
PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 0, 0,
pbn_b0_4_921600 },
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
+ PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, 0, 0,
+ pbn_b0_4_1152000 },
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_4_115200 },
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
diff -puN include/linux/pci_ids.h~serial-add-siig-quartet-support include/linux/pci_ids.h
--- 25/include/linux/pci_ids.h~serial-add-siig-quartet-support Tue Jun 28 15:56:24 2005
+++ 25-akpm/include/linux/pci_ids.h Tue Jun 28 15:56:24 2005
@@ -1871,6 +1871,7 @@
#define PCI_DEVICE_ID_CBOARDS_DAS1602_16 0x0001
#define PCI_VENDOR_ID_SIIG 0x131f
+#define PCI_SUBVENDOR_ID_SIIG 0x131f
#define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
#define PCI_DEVICE_ID_SIIG_1S_10x_650 0x1001
#define PCI_DEVICE_ID_SIIG_1S_10x_850 0x1002
@@ -1908,6 +1909,7 @@
#define PCI_DEVICE_ID_SIIG_2S1P_20x_550 0x2060
#define PCI_DEVICE_ID_SIIG_2S1P_20x_650 0x2061
#define PCI_DEVICE_ID_SIIG_2S1P_20x_850 0x2062
+#define PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL 0x2050
#define PCI_VENDOR_ID_RADISYS 0x1331
#define PCI_DEVICE_ID_RADISYS_ENP2611 0x0030
_