GIT 2a40342e0e72a2ba89aaa9e6c9a9eceb04741b24 master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
---
diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt
--- a/Documentation/scsi/scsi_mid_low_api.txt
+++ b/Documentation/scsi/scsi_mid_low_api.txt
@@ -388,7 +388,6 @@ Summary:
scsi_remove_device - detach and remove a SCSI device
scsi_remove_host - detach and remove all SCSI devices owned by host
scsi_report_bus_reset - report scsi _bus_ reset observed
- scsi_set_device - place device reference in host structure
scsi_track_queue_full - track successive QUEUE_FULL events
scsi_unblock_requests - allow further commands to be queued to given host
scsi_unregister - [calls scsi_host_put()]
@@ -741,20 +740,6 @@ void scsi_report_bus_reset(struct Scsi_H
/**
- * scsi_set_device - place device reference in host structure
- * @shost: a pointer to a scsi host instance
- * @pdev: pointer to device instance to assign
- *
- * Returns nothing
- *
- * Might block: no
- *
- * Defined in: include/scsi/scsi_host.h .
- **/
-void scsi_set_device(struct Scsi_Host * shost, struct device * dev)
-
-
-/**
* scsi_track_queue_full - track successive QUEUE_FULL events on given
* device to determine if and when there is a need
* to adjust the queue depth on the device.
diff --git a/drivers/fc4/fc.c b/drivers/fc4/fc.c
--- a/drivers/fc4/fc.c
+++ b/drivers/fc4/fc.c
@@ -365,6 +365,7 @@ void fcp_register(fc_channel *fc, u8 typ
kfree (fc->scsi_bitmap);
kfree (fc->cmd_slots);
FCND(("Unregistering\n"));
+#if 0
if (fc->rst_pkt) {
if (fc->rst_pkt->eh_state == SCSI_STATE_UNUSED)
kfree(fc->rst_pkt);
@@ -373,6 +374,7 @@ void fcp_register(fc_channel *fc, u8 typ
printk("FC: Reset in progress. Now?!");
}
}
+#endif
FCND(("Unregistered\n"));
}
} else
@@ -915,6 +917,7 @@ int fcp_scsi_abort(Scsi_Cmnd *SCpnt)
}
}
+#if 0
void fcp_scsi_reset_done(Scsi_Cmnd *SCpnt)
{
fc_channel *fc = FC_SCMND(SCpnt);
@@ -922,11 +925,13 @@ void fcp_scsi_reset_done(Scsi_Cmnd *SCpn
fc->rst_pkt->eh_state = SCSI_STATE_FINISHED;
up(fc->rst_pkt->device->host->eh_action);
}
+#endif
#define FCP_RESET_TIMEOUT (2*HZ)
int fcp_scsi_dev_reset(Scsi_Cmnd *SCpnt)
{
+#if 0 /* broken junk, but if davem wants to compile this driver, let him.. */
unsigned long flags;
fcp_cmd *cmd;
fcp_cmnd *fcmd;
@@ -1000,6 +1005,7 @@ int fcp_scsi_dev_reset(Scsi_Cmnd *SCpnt)
}
fc->rst_pkt->eh_state = SCSI_STATE_UNUSED;
return SUCCESS;
+#endif
}
static int __fcp_scsi_host_reset(Scsi_Cmnd *SCpnt)
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -83,19 +83,6 @@ static int mptfcDoneCtx = -1;
static int mptfcTaskCtx = -1;
static int mptfcInternalCtx = -1; /* Used only for internal commands */
-static struct device_attribute mptfc_queue_depth_attr = {
- .attr = {
- .name = "queue_depth",
- .mode = S_IWUSR,
- },
- .store = mptscsih_store_queue_depth,
-};
-
-static struct device_attribute *mptfc_dev_attrs[] = {
- &mptfc_queue_depth_attr,
- NULL,
-};
-
static struct scsi_host_template mptfc_driver_template = {
.proc_name = "mptfc",
.proc_info = mptscsih_proc_info,
@@ -105,6 +92,7 @@ static struct scsi_host_template mptfc_d
.slave_alloc = mptscsih_slave_alloc,
.slave_configure = mptscsih_slave_configure,
.slave_destroy = mptscsih_slave_destroy,
+ .change_queue_depth = mptscsih_change_queue_depth,
.eh_abort_handler = mptscsih_abort,
.eh_device_reset_handler = mptscsih_dev_reset,
.eh_bus_reset_handler = mptscsih_bus_reset,
@@ -116,7 +104,6 @@ static struct scsi_host_template mptfc_d
.max_sectors = 8192,
.cmd_per_lun = 7,
.use_clustering = ENABLE_CLUSTERING,
- .sdev_attrs = mptfc_dev_attrs,
};
/****************************************************************************
@@ -267,10 +254,6 @@ mptfc_probe(struct pci_dev *pdev, const
sh->sg_tablesize = numSGE;
}
- /* Set the pci device pointer in Scsi_Host structure.
- */
- scsi_set_device(sh, &ioc->pcidev->dev);
-
spin_unlock_irqrestore(&ioc->FreeQlock, flags);
hd = (MPT_SCSI_HOST *) sh->hostdata;
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -2234,13 +2234,27 @@ mptscsih_slave_destroy(struct scsi_devic
}
}
-static void
-mptscsih_set_queue_depth(struct scsi_device *device, MPT_SCSI_HOST *hd,
- VirtDevice *pTarget, int qdepth)
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mptscsih_change_queue_depth - This function will set a devices queue depth
+ * @sdev: per scsi_device pointer
+ * @qdepth: requested queue depth
+ *
+ * Adding support for new 'change_queue_depth' api.
+*/
+int
+mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
{
+ MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)sdev->host->hostdata;
+ VirtDevice *pTarget;
int max_depth;
int tagged;
+ if (hd == NULL)
+ return 0;
+ if (!(pTarget = hd->Targets[sdev->id]))
+ return 0;
+
if (hd->ioc->bus_type == SCSI) {
if (pTarget->tflags & MPT_TARGET_FLAGS_VALID_INQUIRY) {
if (!(pTarget->tflags & MPT_TARGET_FLAGS_Q_YES))
@@ -2264,10 +2278,10 @@ mptscsih_set_queue_depth(struct scsi_dev
else
tagged = MSG_SIMPLE_TAG;
- scsi_adjust_queue_depth(device, tagged, qdepth);
+ scsi_adjust_queue_depth(sdev, tagged, qdepth);
+ return sdev->queue_depth;
}
-
/*
* OS entry point to adjust the queue_depths on a per-device basis.
* Called once per device the bus scan. Use it to force the queue_depth
@@ -2317,7 +2331,7 @@ mptscsih_slave_configure(struct scsi_dev
mptscsih_initTarget(hd, device->channel, device->id, device->lun,
device->inquiry, device->inquiry_len );
- mptscsih_set_queue_depth(device, hd, pTarget, MPT_SCSI_CMD_PER_DEV_HIGH);
+ mptscsih_change_queue_depth(device, MPT_SCSI_CMD_PER_DEV_HIGH);
dsprintk((MYIOC_s_INFO_FMT
"Queue depth=%d, tflags=%x\n",
@@ -2337,25 +2351,6 @@ slave_configure_exit:
return 0;
}
-ssize_t
-mptscsih_store_queue_depth(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
- int depth;
- struct scsi_device *sdev = to_scsi_device(dev);
- MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *) sdev->host->hostdata;
- VirtDevice *pTarget;
-
- depth = simple_strtoul(buf, NULL, 0);
- if (depth == 0)
- return -EINVAL;
- pTarget = hd->Targets[sdev->id];
- if (pTarget == NULL)
- return -EINVAL;
- mptscsih_set_queue_depth(sdev, (MPT_SCSI_HOST *) sdev->host->hostdata,
- pTarget, depth);
- return count;
-}
-
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* Private routines...
@@ -5586,7 +5581,7 @@ EXPORT_SYMBOL(mptscsih_taskmgmt_complete
EXPORT_SYMBOL(mptscsih_scandv_complete);
EXPORT_SYMBOL(mptscsih_event_process);
EXPORT_SYMBOL(mptscsih_ioc_reset);
-EXPORT_SYMBOL(mptscsih_store_queue_depth);
+EXPORT_SYMBOL(mptscsih_change_queue_depth);
EXPORT_SYMBOL(mptscsih_timer_expired);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h
--- a/drivers/message/fusion/mptscsih.h
+++ b/drivers/message/fusion/mptscsih.h
@@ -103,5 +103,5 @@ extern int mptscsih_taskmgmt_complete(MP
extern int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
extern int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
extern int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
-extern ssize_t mptscsih_store_queue_depth(struct device *dev, struct device_attribute *attr, const char *buf, size_t count);
+extern int mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth);
extern void mptscsih_timer_expired(unsigned long data);
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -102,19 +102,6 @@ static int mptspiDoneCtx = -1;
static int mptspiTaskCtx = -1;
static int mptspiInternalCtx = -1; /* Used only for internal commands */
-static struct device_attribute mptspi_queue_depth_attr = {
- .attr = {
- .name = "queue_depth",
- .mode = S_IWUSR,
- },
- .store = mptscsih_store_queue_depth,
-};
-
-static struct device_attribute *mptspi_dev_attrs[] = {
- &mptspi_queue_depth_attr,
- NULL,
-};
-
static struct scsi_host_template mptspi_driver_template = {
.proc_name = "mptspi",
.proc_info = mptscsih_proc_info,
@@ -124,6 +111,7 @@ static struct scsi_host_template mptspi_
.slave_alloc = mptscsih_slave_alloc,
.slave_configure = mptscsih_slave_configure,
.slave_destroy = mptscsih_slave_destroy,
+ .change_queue_depth = mptscsih_change_queue_depth,
.eh_abort_handler = mptscsih_abort,
.eh_device_reset_handler = mptscsih_dev_reset,
.eh_bus_reset_handler = mptscsih_bus_reset,
@@ -135,7 +123,6 @@ static struct scsi_host_template mptspi_
.max_sectors = 8192,
.cmd_per_lun = 7,
.use_clustering = ENABLE_CLUSTERING,
- .sdev_attrs = mptspi_dev_attrs,
};
@@ -287,10 +274,6 @@ mptspi_probe(struct pci_dev *pdev, const
sh->sg_tablesize = numSGE;
}
- /* Set the pci device pointer in Scsi_Host structure.
- */
- scsi_set_device(sh, &ioc->pcidev->dev);
-
spin_unlock_irqrestore(&ioc->FreeQlock, flags);
hd = (MPT_SCSI_HOST *) sh->hostdata;
diff --git a/drivers/scsi/aacraid/README b/drivers/scsi/aacraid/README
--- a/drivers/scsi/aacraid/README
+++ b/drivers/scsi/aacraid/README
@@ -13,6 +13,7 @@ Supported Cards/Chipsets
Adaptec 2020S
Adaptec 2025S
Adaptec 2120S
+ Adaptec 2130S
Adaptec 2200S
Adaptec 2230S
Adaptec 2240S
@@ -35,6 +36,13 @@ Supported Cards/Chipsets
HP NetRAID-4M
Legend S220
Legend S230
+ IBM ServeRAID 8i
+ ICP 9014R0
+ ICP 9024R0
+ ICP 9047MA
+ ICP 9087MA
+ ICP 9085LI
+ ICP 5085AU
People
-------------------------
diff --git a/drivers/scsi/aacraid/TODO b/drivers/scsi/aacraid/TODO
--- a/drivers/scsi/aacraid/TODO
+++ b/drivers/scsi/aacraid/TODO
@@ -1,6 +1,4 @@
o Testing
o More testing
-o Feature request: display the firmware/bios/etc revisions in the
- /proc info
o Drop irq_mask, basically unused
o I/O size increase
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -276,7 +276,6 @@ int aac_get_containers(struct aac_dev *d
if (maximum_num_containers < MAXIMUM_NUM_CONTAINERS)
maximum_num_containers = MAXIMUM_NUM_CONTAINERS;
-
fsa_dev_ptr = (struct fsa_dev_info *) kmalloc(
sizeof(*fsa_dev_ptr) * maximum_num_containers, GFP_KERNEL);
if (!fsa_dev_ptr) {
@@ -527,6 +526,11 @@ static char *container_types[] = {
"V-MIRRORS",
"PSEUDO R4",
"RAID50",
+ "RAID5D",
+ "RAID5D0",
+ "RAID1E",
+ "RAID6",
+ "RAID60",
"Unknown"
};
@@ -610,7 +614,9 @@ int aac_get_adapter_info(struct aac_dev*
struct fib* fibptr;
int rcode;
u32 tmp;
- struct aac_adapter_info * info;
+ struct aac_adapter_info *info;
+ struct aac_bus_info *command;
+ struct aac_bus_info_response *bus_info;
if (!(fibptr = fib_alloc(dev)))
return -ENOMEM;
@@ -655,6 +661,36 @@ int aac_get_adapter_info(struct aac_dev*
memcpy(&dev->supplement_adapter_info, info, sizeof(*info));
}
+
+ /*
+ * GetBusInfo
+ */
+
+ fib_init(fibptr);
+
+ bus_info = (struct aac_bus_info_response *) fib_data(fibptr);
+
+ memset(bus_info, 0, sizeof(*bus_info));
+
+ command = (struct aac_bus_info *)bus_info;
+
+ command->Command = cpu_to_le32(VM_Ioctl);
+ command->ObjType = cpu_to_le32(FT_DRIVE);
+ command->MethodId = cpu_to_le32(1);
+ command->CtlCmd = cpu_to_le32(GetBusInfo);
+
+ rcode = fib_send(ContainerCommand,
+ fibptr,
+ sizeof (*bus_info),
+ FsaNormal,
+ 1, 1,
+ NULL, NULL);
+
+ if (rcode >= 0 && le32_to_cpu(bus_info->Status) == ST_OK) {
+ dev->maximum_num_physicals = le32_to_cpu(bus_info->TargetsPerBus);
+ dev->maximum_num_channels = le32_to_cpu(bus_info->BusCount);
+ }
+
tmp = le32_to_cpu(dev->adapter_info.kernelrev);
printk(KERN_INFO "%s%d: kernel %d.%d-%d[%d] %.*s\n",
dev->name,
@@ -1818,7 +1854,9 @@ static int aac_send_srb_fib(struct scsi_
u32 flag;
u32 timeout;
- if( scsicmd->device->id > 15 || scsicmd->device->lun > 7) {
+ dev = (struct aac_dev *)scsicmd->device->host->hostdata;
+ if (scsicmd->device->id >= dev->maximum_num_physicals ||
+ scsicmd->device->lun > 7) {
scsicmd->result = DID_NO_CONNECT << 16;
scsicmd->scsi_done(scsicmd);
return 0;
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -845,6 +845,28 @@ struct aac_supplement_adapter_info
#define AAC_SIS_VERSION_V3 3
#define AAC_SIS_SLOT_UNKNOWN 0xFF
+#define GetBusInfo 0x00000009
+struct aac_bus_info {
+ __le32 Command; /* VM_Ioctl */
+ __le32 ObjType; /* FT_DRIVE */
+ __le32 MethodId; /* 1 = SCSI Layer */
+ __le32 ObjectId; /* Handle */
+ __le32 CtlCmd; /* GetBusInfo */
+};
+
+struct aac_bus_info_response {
+ __le32 Status; /* ST_OK */
+ __le32 ObjType;
+ __le32 MethodId; /* unused */
+ __le32 ObjectId; /* unused */
+ __le32 CtlCmd; /* unused */
+ __le32 ProbeComplete;
+ __le32 BusCount;
+ __le32 TargetsPerBus;
+ u8 InitiatorBusId[10];
+ u8 BusValid[10];
+};
+
/*
* Battery platforms
*/
@@ -934,6 +956,8 @@ struct aac_dev
struct Scsi_Host *scsi_host_ptr;
int maximum_num_containers;
+ int maximum_num_physicals;
+ int maximum_num_channels;
struct fsa_dev_info *fsa_dev;
pid_t thread_pid;
int cardtype;
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -102,32 +102,43 @@ static struct pci_device_id aac_pci_tbl[
{ 0x9005, 0x0286, 0x9005, 0x029b, 0, 0, 22 }, /* AAR-2820SA (Intruder) */
{ 0x9005, 0x0286, 0x9005, 0x029c, 0, 0, 23 }, /* AAR-2620SA (Intruder) */
{ 0x9005, 0x0286, 0x9005, 0x029d, 0, 0, 24 }, /* AAR-2420SA (Intruder) */
- { 0x9005, 0x0286, 0x9005, 0x0800, 0, 0, 25 }, /* Callisto Jupiter Platform */
- { 0x9005, 0x0285, 0x9005, 0x028e, 0, 0, 26 }, /* ASR-2020SA SATA PCI-X ZCR (Skyhawk) */
- { 0x9005, 0x0285, 0x9005, 0x028f, 0, 0, 27 }, /* ASR-2025SA SATA SO-DIMM PCI-X ZCR (Terminator) */
- { 0x9005, 0x0285, 0x9005, 0x0290, 0, 0, 28 }, /* AAR-2410SA PCI SATA 4ch (Jaguar II) */
- { 0x9005, 0x0285, 0x1028, 0x0291, 0, 0, 29 }, /* CERC SATA RAID 2 PCI SATA 6ch (DellCorsair) */
- { 0x9005, 0x0285, 0x9005, 0x0292, 0, 0, 30 }, /* AAR-2810SA PCI SATA 8ch (Corsair-8) */
- { 0x9005, 0x0285, 0x9005, 0x0293, 0, 0, 31 }, /* AAR-21610SA PCI SATA 16ch (Corsair-16) */
- { 0x9005, 0x0285, 0x9005, 0x0294, 0, 0, 32 }, /* ESD SO-DIMM PCI-X SATA ZCR (Prowler) */
- { 0x9005, 0x0285, 0x103C, 0x3227, 0, 0, 33 }, /* AAR-2610SA PCI SATA 6ch */
- { 0x9005, 0x0285, 0x9005, 0x0296, 0, 0, 34 }, /* ASR-2240S (SabreExpress) */
- { 0x9005, 0x0285, 0x9005, 0x0297, 0, 0, 35 }, /* ASR-4005SAS */
- { 0x9005, 0x0285, 0x1014, 0x02F2, 0, 0, 36 }, /* IBM 8i (AvonPark) */
- { 0x9005, 0x0285, 0x9005, 0x0298, 0, 0, 37 }, /* ASR-4000SAS (BlackBird) */
- { 0x9005, 0x0285, 0x9005, 0x0299, 0, 0, 38 }, /* ASR-4800SAS (Marauder-X) */
- { 0x9005, 0x0285, 0x9005, 0x029A, 0, 0, 39 }, /* ASR-4805SAS (Marauder-E) */
-
- { 0x9005, 0x0285, 0x1028, 0x0287, 0, 0, 40 }, /* Perc 320/DC*/
- { 0x1011, 0x0046, 0x9005, 0x0365, 0, 0, 41 }, /* Adaptec 5400S (Mustang)*/
- { 0x1011, 0x0046, 0x9005, 0x0364, 0, 0, 42 }, /* Adaptec 5400S (Mustang)*/
- { 0x1011, 0x0046, 0x9005, 0x1364, 0, 0, 43 }, /* Dell PERC2/QC */
- { 0x1011, 0x0046, 0x103c, 0x10c2, 0, 0, 44 }, /* HP NetRAID-4M */
-
- { 0x9005, 0x0285, 0x1028, PCI_ANY_ID, 0, 0, 45 }, /* Dell Catchall */
- { 0x9005, 0x0285, 0x17aa, PCI_ANY_ID, 0, 0, 46 }, /* Legend Catchall */
- { 0x9005, 0x0285, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 47 }, /* Adaptec Catch All */
- { 0x9005, 0x0286, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 48 }, /* Adaptec Rocket Catch All */
+ { 0x9005, 0x0286, 0x9005, 0x029e, 0, 0, 25 }, /* ICP9024R0 (Lancer) */
+ { 0x9005, 0x0286, 0x9005, 0x029f, 0, 0, 26 }, /* ICP9014R0 (Lancer) */
+ { 0x9005, 0x0286, 0x9005, 0x02a0, 0, 0, 27 }, /* ICP9047MA (Lancer) */
+ { 0x9005, 0x0286, 0x9005, 0x02a1, 0, 0, 28 }, /* ICP9087MA (Lancer) */
+ { 0x9005, 0x0286, 0x9005, 0x02a3, 0, 0, 29 }, /* ICP5085AU (Hurricane) */
+ { 0x9005, 0x0285, 0x9005, 0x02a4, 0, 0, 30 }, /* ICP9085LI (Marauder-X) */
+ { 0x9005, 0x0285, 0x9005, 0x02a5, 0, 0, 31 }, /* ICP5085BR (Marauder-E) */
+ { 0x9005, 0x0287, 0x9005, 0x0800, 0, 0, 32 }, /* Themisto Jupiter Platform */
+ { 0x9005, 0x0200, 0x9005, 0x0200, 0, 0, 32 }, /* Themisto Jupiter Platform */
+ { 0x9005, 0x0286, 0x9005, 0x0800, 0, 0, 33 }, /* Callisto Jupiter Platform */
+ { 0x9005, 0x0285, 0x9005, 0x028e, 0, 0, 34 }, /* ASR-2020SA SATA PCI-X ZCR (Skyhawk) */
+ { 0x9005, 0x0285, 0x9005, 0x028f, 0, 0, 35 }, /* ASR-2025SA SATA SO-DIMM PCI-X ZCR (Terminator) */
+ { 0x9005, 0x0285, 0x9005, 0x0290, 0, 0, 36 }, /* AAR-2410SA PCI SATA 4ch (Jaguar II) */
+ { 0x9005, 0x0285, 0x1028, 0x0291, 0, 0, 37 }, /* CERC SATA RAID 2 PCI SATA 6ch (DellCorsair) */
+ { 0x9005, 0x0285, 0x9005, 0x0292, 0, 0, 38 }, /* AAR-2810SA PCI SATA 8ch (Corsair-8) */
+ { 0x9005, 0x0285, 0x9005, 0x0293, 0, 0, 39 }, /* AAR-21610SA PCI SATA 16ch (Corsair-16) */
+ { 0x9005, 0x0285, 0x9005, 0x0294, 0, 0, 40 }, /* ESD SO-DIMM PCI-X SATA ZCR (Prowler) */
+ { 0x9005, 0x0285, 0x103C, 0x3227, 0, 0, 41 }, /* AAR-2610SA PCI SATA 6ch */
+ { 0x9005, 0x0285, 0x9005, 0x0296, 0, 0, 42 }, /* ASR-2240S (SabreExpress) */
+ { 0x9005, 0x0285, 0x9005, 0x0297, 0, 0, 43 }, /* ASR-4005SAS */
+ { 0x9005, 0x0285, 0x1014, 0x02F2, 0, 0, 44 }, /* IBM 8i (AvonPark) */
+ { 0x9005, 0x0285, 0x1014, 0x0312, 0, 0, 44 }, /* IBM 8i (AvonPark Lite) */
+ { 0x9005, 0x0285, 0x9005, 0x0298, 0, 0, 45 }, /* ASR-4000SAS (BlackBird) */
+ { 0x9005, 0x0285, 0x9005, 0x0299, 0, 0, 46 }, /* ASR-4800SAS (Marauder-X) */
+ { 0x9005, 0x0285, 0x9005, 0x029a, 0, 0, 47 }, /* ASR-4805SAS (Marauder-E) */
+ { 0x9005, 0x0286, 0x9005, 0x02a2, 0, 0, 48 }, /* ASR-4810SAS (Hurricane */
+
+ { 0x9005, 0x0285, 0x1028, 0x0287, 0, 0, 49 }, /* Perc 320/DC*/
+ { 0x1011, 0x0046, 0x9005, 0x0365, 0, 0, 50 }, /* Adaptec 5400S (Mustang)*/
+ { 0x1011, 0x0046, 0x9005, 0x0364, 0, 0, 51 }, /* Adaptec 5400S (Mustang)*/
+ { 0x1011, 0x0046, 0x9005, 0x1364, 0, 0, 52 }, /* Dell PERC2/QC */
+ { 0x1011, 0x0046, 0x103c, 0x10c2, 0, 0, 53 }, /* HP NetRAID-4M */
+
+ { 0x9005, 0x0285, 0x1028, PCI_ANY_ID, 0, 0, 54 }, /* Dell Catchall */
+ { 0x9005, 0x0285, 0x17aa, PCI_ANY_ID, 0, 0, 55 }, /* Legend Catchall */
+ { 0x9005, 0x0285, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 56 }, /* Adaptec Catch All */
+ { 0x9005, 0x0286, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 57 }, /* Adaptec Rocket Catch All */
{ 0,}
};
MODULE_DEVICE_TABLE(pci, aac_pci_tbl);
@@ -164,6 +175,14 @@ static struct aac_driver_ident aac_drive
{ aac_rkt_init, "aacraid", "ADAPTEC ", "AAR-2820SA ", 1 }, /* AAR-2820SA (Intruder) */
{ aac_rkt_init, "aacraid", "ADAPTEC ", "AAR-2620SA ", 1 }, /* AAR-2620SA (Intruder) */
{ aac_rkt_init, "aacraid", "ADAPTEC ", "AAR-2420SA ", 1 }, /* AAR-2420SA (Intruder) */
+ { aac_rkt_init, "aacraid", "ICP ", "ICP9024R0 ", 2 }, /* ICP9024R0 (Lancer) */
+ { aac_rkt_init, "aacraid", "ICP ", "ICP9014R0 ", 1 }, /* ICP9014R0 (Lancer) */
+ { aac_rkt_init, "aacraid", "ICP ", "ICP9047MA ", 1 }, /* ICP9047MA (Lancer) */
+ { aac_rkt_init, "aacraid", "ICP ", "ICP9087MA ", 1 }, /* ICP9087MA (Lancer) */
+ { aac_rkt_init, "aacraid", "ICP ", "ICP5085AU ", 1 }, /* ICP5085AU (Hurricane) */
+ { aac_rkt_init, "aacraid", "ICP ", "ICP9085LI ", 1 }, /* ICP9085LI (Marauder-X) */
+ { aac_rkt_init, "aacraid", "ICP ", "ICP5085BR ", 1 }, /* ICP5085BR (Marauder-E) */
+ { NULL , "aacraid", "ADAPTEC ", "Themisto ", 0, AAC_QUIRK_SLAVE }, /* Jupiter Platform */
{ aac_rkt_init, "aacraid", "ADAPTEC ", "Callisto ", 2, AAC_QUIRK_MASTER }, /* Jupiter Platform */
{ aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2020SA ", 1 }, /* ASR-2020SA SATA PCI-X ZCR (Skyhawk) */
{ aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2025SA ", 1 }, /* ASR-2025SA SATA SO-DIMM PCI-X ZCR (Terminator) */
@@ -175,10 +194,11 @@ static struct aac_driver_ident aac_drive
{ aac_rx_init, "aacraid", "ADAPTEC ", "AAR-2610SA ", 1 }, /* SATA 6Ch (Bearcat) */
{ aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2240S ", 1 }, /* ASR-2240S (SabreExpress) */
{ aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4005SAS ", 1 }, /* ASR-4005SAS */
- { aac_rx_init, "aacraid", "IBM ", "ServeRAID 8i ", 1 }, /* IBM 8i (AvonPark) */
+ { aac_rx_init, "ServeRAID","IBM ", "ServeRAID 8i ", 1 }, /* IBM 8i (AvonPark) */
{ aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4000SAS ", 1 }, /* ASR-4000SAS (BlackBird & AvonPark) */
{ aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4800SAS ", 1 }, /* ASR-4800SAS (Marauder-X) */
{ aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4805SAS ", 1 }, /* ASR-4805SAS (Marauder-E) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4810SAS ", 1 }, /* ASR-4810SAS (Hurricane) */
{ aac_rx_init, "percraid", "DELL ", "PERC 320/DC ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Perc 320/DC*/
{ aac_sa_init, "aacraid", "ADAPTEC ", "Adaptec 5400S ", 4, AAC_QUIRK_34SG }, /* Adaptec 5400S (Mustang)*/
@@ -681,7 +701,7 @@ static struct scsi_host_template aac_dri
.slave_configure = aac_slave_configure,
.eh_host_reset_handler = aac_eh_reset,
.can_queue = AAC_NUM_IO_FIB,
- .this_id = 16,
+ .this_id = MAXIMUM_NUM_CONTAINERS,
.sg_tablesize = 16,
.max_sectors = 128,
#if (AAC_NUM_IO_FIB > 256)
@@ -760,6 +780,7 @@ static int __devinit aac_probe_one(struc
if (pci_set_dma_mask(pdev, 0xFFFFFFFFULL))
goto out_free_fibs;
+ aac->maximum_num_channels = aac_drivers[index].channels;
aac_get_adapter_info(aac);
/*
@@ -786,7 +807,7 @@ static int __devinit aac_probe_one(struc
* physical channels are address by their actual physical number+1
*/
if (aac->nondasd_support == 1)
- shost->max_channel = aac_drivers[index].channels+1;
+ shost->max_channel = aac->maximum_num_channels + 1;
else
shost->max_channel = 1;
@@ -795,6 +816,8 @@ static int __devinit aac_probe_one(struc
list_add(&aac->entry, insert);
shost->max_id = aac->maximum_num_containers;
+ if (shost->max_id < aac->maximum_num_physicals)
+ shost->max_id = aac->maximum_num_physicals;
if (shost->max_id < MAXIMUM_NUM_CONTAINERS)
shost->max_id = MAXIMUM_NUM_CONTAINERS;
else
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -4556,8 +4556,6 @@ advansys_detect(struct scsi_host_templat
continue;
}
- scsi_set_device(shp, dev);
-
/* Save a pointer to the Scsi_Host of each board found. */
asc_host[asc_board_count++] = shp;
@@ -9194,8 +9192,8 @@ asc_prt_scsi_cmnd(struct scsi_cmnd *s)
s->sc_data_direction, s->resid);
printk(
-" use_sg %u, sglist_len %u, abort_reason 0x%x\n",
- s->use_sg, s->sglist_len, s->abort_reason);
+" use_sg %u, sglist_len %u\n",
+ s->use_sg, s->sglist_len);
printk(
" serial_number 0x%x, retries %d, allowed %d\n",
diff --git a/drivers/scsi/aic7xxx/aic7770.c b/drivers/scsi/aic7xxx/aic7770.c
--- a/drivers/scsi/aic7xxx/aic7770.c
+++ b/drivers/scsi/aic7xxx/aic7770.c
@@ -254,19 +254,12 @@ aic7770_config(struct ahc_softc *ahc, st
if (error != 0)
return (error);
- ahc_list_lock(&l);
- /*
- * Link this softc in with all other ahc instances.
- */
- ahc_softc_insert(ahc);
+ ahc->init_level++;
/*
* Enable the board's BUS drivers
*/
ahc_outb(ahc, BCTL, ENABLE);
-
- ahc_list_unlock(&l);
-
return (0);
}
diff --git a/drivers/scsi/aic7xxx/aic7770_osm.c b/drivers/scsi/aic7xxx/aic7770_osm.c
--- a/drivers/scsi/aic7xxx/aic7770_osm.c
+++ b/drivers/scsi/aic7xxx/aic7770_osm.c
@@ -102,8 +102,7 @@ aic7770_probe(struct device *dev)
dev_set_drvdata(dev, ahc);
- if (aic7xxx_detect_complete)
- error = ahc_linux_register_host(ahc, &aic7xxx_driver_template);
+ error = ahc_linux_register_host(ahc, &aic7xxx_driver_template);
return (error);
}
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -1553,7 +1553,7 @@ ahd_linux_dev_reset(Scsi_Cmnd *cmd)
ahd_queue_scb(ahd, scb);
scb->platform_data->flags |= AHD_SCB_UP_EH_SEM;
- spin_unlock_irq(&ahd->platform_data->spin_lock);
+ ahd_unlock(ahd, &s);
init_timer(&timer);
timer.data = (u_long)scb;
timer.expires = jiffies + (5 * HZ);
@@ -1567,7 +1567,7 @@ ahd_linux_dev_reset(Scsi_Cmnd *cmd)
printf("Timer Expired\n");
retval = FAILED;
}
- spin_lock_irq(&ahd->platform_data->spin_lock);
+ ahd_lock(ahd, &s);
ahd_schedule_runq(ahd);
ahd_linux_run_complete_queue(ahd);
ahd_unlock(ahd, &s);
diff --git a/drivers/scsi/aic7xxx/aic7xxx.h b/drivers/scsi/aic7xxx/aic7xxx.h
--- a/drivers/scsi/aic7xxx/aic7xxx.h
+++ b/drivers/scsi/aic7xxx/aic7xxx.h
@@ -1023,9 +1023,6 @@ struct ahc_softc {
struct cs *critical_sections;
u_int num_critical_sections;
- /* Links for chaining softcs */
- TAILQ_ENTRY(ahc_softc) links;
-
/* Channel Names ('A', 'B', etc.) */
char channel;
char channel_b;
@@ -1110,9 +1107,6 @@ struct ahc_softc {
uint16_t user_tagenable;/* Tagged Queuing allowed */
};
-TAILQ_HEAD(ahc_softc_tailq, ahc_softc);
-extern struct ahc_softc_tailq ahc_tailq;
-
/************************ Active Device Information ***************************/
typedef enum {
ROLE_UNKNOWN,
@@ -1198,7 +1192,6 @@ void ahc_intr_enable(struct ahc_softc
void ahc_pause_and_flushwork(struct ahc_softc *ahc);
int ahc_suspend(struct ahc_softc *ahc);
int ahc_resume(struct ahc_softc *ahc);
-void ahc_softc_insert(struct ahc_softc *);
void ahc_set_unit(struct ahc_softc *, int);
void ahc_set_name(struct ahc_softc *, char *);
void ahc_alloc_scbs(struct ahc_softc *ahc);
diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c
--- a/drivers/scsi/aic7xxx/aic7xxx_core.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -52,9 +52,6 @@
#include <dev/aic7xxx/aicasm/aicasm_insformat.h>
#endif
-/****************************** Softc Data ************************************/
-struct ahc_softc_tailq ahc_tailq = TAILQ_HEAD_INITIALIZER(ahc_tailq);
-
/***************************** Lookup Tables **********************************/
char *ahc_chip_names[] =
{
@@ -3879,62 +3876,6 @@ ahc_softc_init(struct ahc_softc *ahc)
}
void
-ahc_softc_insert(struct ahc_softc *ahc)
-{
- struct ahc_softc *list_ahc;
-
-#if AHC_PCI_CONFIG > 0
- /*
- * Second Function PCI devices need to inherit some
- * settings from function 0.
- */
- if ((ahc->chip & AHC_BUS_MASK) == AHC_PCI
- && (ahc->features & AHC_MULTI_FUNC) != 0) {
- TAILQ_FOREACH(list_ahc, &ahc_tailq, links) {
- ahc_dev_softc_t list_pci;
- ahc_dev_softc_t pci;
-
- list_pci = list_ahc->dev_softc;
- pci = ahc->dev_softc;
- if (ahc_get_pci_slot(list_pci) == ahc_get_pci_slot(pci)
- && ahc_get_pci_bus(list_pci) == ahc_get_pci_bus(pci)) {
- struct ahc_softc *master;
- struct ahc_softc *slave;
-
- if (ahc_get_pci_function(list_pci) == 0) {
- master = list_ahc;
- slave = ahc;
- } else {
- master = ahc;
- slave = list_ahc;
- }
- slave->flags &= ~AHC_BIOS_ENABLED;
- slave->flags |=
- master->flags & AHC_BIOS_ENABLED;
- slave->flags &= ~AHC_PRIMARY_CHANNEL;
- slave->flags |=
- master->flags & AHC_PRIMARY_CHANNEL;
- break;
- }
- }
- }
-#endif
-
- /*
- * Insertion sort into our list of softcs.
- */
- list_ahc = TAILQ_FIRST(&ahc_tailq);
- while (list_ahc != NULL
- && ahc_softc_comp(ahc, list_ahc) <= 0)
- list_ahc = TAILQ_NEXT(list_ahc, links);
- if (list_ahc != NULL)
- TAILQ_INSERT_BEFORE(list_ahc, ahc, links);
- else
- TAILQ_INSERT_TAIL(&ahc_tailq, ahc, links);
- ahc->init_level++;
-}
-
-void
ahc_set_unit(struct ahc_softc *ahc, int unit)
{
ahc->unit = unit;
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -136,10 +136,6 @@ static struct scsi_transport_template *a
#include <linux/blkdev.h> /* For block_size() */
#include <linux/delay.h> /* For ssleep/msleep */
-/*
- * Lock protecting manipulation of the ahc softc list.
- */
-spinlock_t ahc_list_spinlock;
/*
* Set this to the delay in seconds after SCSI bus reset.
@@ -292,25 +288,6 @@ ahc_print_path(struct ahc_softc *ahc, st
static uint32_t aic7xxx_no_reset;
/*
- * Certain PCI motherboards will scan PCI devices from highest to lowest,
- * others scan from lowest to highest, and they tend to do all kinds of
- * strange things when they come into contact with PCI bridge chips. The
- * net result of all this is that the PCI card that is actually used to boot
- * the machine is very hard to detect. Most motherboards go from lowest
- * PCI slot number to highest, and the first SCSI controller found is the
- * one you boot from. The only exceptions to this are when a controller
- * has its BIOS disabled. So, we by default sort all of our SCSI controllers
- * from lowest PCI slot number to highest PCI slot number. We also force
- * all controllers with their BIOS disabled to the end of the list. This
- * works on *almost* all computers. Where it doesn't work, we have this
- * option. Setting this option to non-0 will reverse the order of the sort
- * to highest first, then lowest, but will still leave cards with their BIOS
- * disabled at the very end. That should fix everyone up unless there are
- * really strange cirumstances.
- */
-static uint32_t aic7xxx_reverse_scan;
-
-/*
* Should we force EXTENDED translation on a controller.
* 0 == Use whatever is in the SEEPROM or default to off
* 1 == Use whatever is in the SEEPROM or default to on
@@ -338,13 +315,6 @@ static uint32_t aic7xxx_pci_parity = ~0;
uint32_t aic7xxx_allow_memio = ~0;
/*
- * aic7xxx_detect() has been run, so register all device arrivals
- * immediately with the system rather than deferring to the sorted
- * attachment performed by aic7xxx_detect().
- */
-int aic7xxx_detect_complete;
-
-/*
* So that we can set how long each device is given as a selection timeout.
* The table of values goes like this:
* 0 - 256ms
@@ -423,7 +393,9 @@ static int ahc_linux_run_command(struct
static void ahc_linux_setup_tag_info_global(char *p);
static aic_option_callback_t ahc_linux_setup_tag_info;
static int aic7xxx_setup(char *s);
-static int ahc_linux_next_unit(void);
+
+static int ahc_linux_unit;
+
/********************************* Inlines ************************************/
static __inline void ahc_linux_unmap_scb(struct ahc_softc*, struct scb*);
@@ -476,48 +448,6 @@ ahc_linux_map_seg(struct ahc_softc *ahc,
}
/*
- * Try to detect an Adaptec 7XXX controller.
- */
-static int
-ahc_linux_detect(struct scsi_host_template *template)
-{
- struct ahc_softc *ahc;
- int found = 0;
-
- /*
- * If we've been passed any parameters, process them now.
- */
- if (aic7xxx)
- aic7xxx_setup(aic7xxx);
-
- template->proc_name = "aic7xxx";
-
- /*
- * Initialize our softc list lock prior to
- * probing for any adapters.
- */
- ahc_list_lockinit();
-
- found = ahc_linux_pci_init();
- if (!ahc_linux_eisa_init())
- found++;
-
- /*
- * Register with the SCSI layer all
- * controllers we've found.
- */
- TAILQ_FOREACH(ahc, &ahc_tailq, links) {
-
- if (ahc_linux_register_host(ahc, template) == 0)
- found++;
- }
-
- aic7xxx_detect_complete++;
-
- return (found);
-}
-
-/*
* Return a string describing the driver.
*/
static const char *
@@ -848,6 +778,7 @@ ahc_linux_bus_reset(struct scsi_cmnd *cm
struct scsi_host_template aic7xxx_driver_template = {
.module = THIS_MODULE,
.name = "aic7xxx",
+ .proc_name = "aic7xxx",
.proc_info = ahc_linux_proc_info,
.info = ahc_linux_info,
.queuecommand = ahc_linux_queue,
@@ -959,99 +890,6 @@ ahc_dmamap_unload(struct ahc_softc *ahc,
return (0);
}
-/********************* Platform Dependent Functions ***************************/
-/*
- * Compare "left hand" softc with "right hand" softc, returning:
- * < 0 - lahc has a lower priority than rahc
- * 0 - Softcs are equal
- * > 0 - lahc has a higher priority than rahc
- */
-int
-ahc_softc_comp(struct ahc_softc *lahc, struct ahc_softc *rahc)
-{
- int value;
- int rvalue;
- int lvalue;
-
- /*
- * Under Linux, cards are ordered as follows:
- * 1) VLB/EISA BIOS enabled devices sorted by BIOS address.
- * 2) PCI devices with BIOS enabled sorted by bus/slot/func.
- * 3) All remaining VLB/EISA devices sorted by ioport.
- * 4) All remaining PCI devices sorted by bus/slot/func.
- */
- value = (lahc->flags & AHC_BIOS_ENABLED)
- - (rahc->flags & AHC_BIOS_ENABLED);
- if (value != 0)
- /* Controllers with BIOS enabled have a *higher* priority */
- return (value);
-
- /*
- * Same BIOS setting, now sort based on bus type.
- * EISA and VL controllers sort together. EISA/VL
- * have higher priority than PCI.
- */
- rvalue = (rahc->chip & AHC_BUS_MASK);
- if (rvalue == AHC_VL)
- rvalue = AHC_EISA;
- lvalue = (lahc->chip & AHC_BUS_MASK);
- if (lvalue == AHC_VL)
- lvalue = AHC_EISA;
- value = rvalue - lvalue;
- if (value != 0)
- return (value);
-
- /* Still equal. Sort by BIOS address, ioport, or bus/slot/func. */
- switch (rvalue) {
-#ifdef CONFIG_PCI
- case AHC_PCI:
- {
- char primary_channel;
-
- if (aic7xxx_reverse_scan != 0)
- value = ahc_get_pci_bus(lahc->dev_softc)
- - ahc_get_pci_bus(rahc->dev_softc);
- else
- value = ahc_get_pci_bus(rahc->dev_softc)
- - ahc_get_pci_bus(lahc->dev_softc);
- if (value != 0)
- break;
- if (aic7xxx_reverse_scan != 0)
- value = ahc_get_pci_slot(lahc->dev_softc)
- - ahc_get_pci_slot(rahc->dev_softc);
- else
- value = ahc_get_pci_slot(rahc->dev_softc)
- - ahc_get_pci_slot(lahc->dev_softc);
- if (value != 0)
- break;
- /*
- * On multi-function devices, the user can choose
- * to have function 1 probed before function 0.
- * Give whichever channel is the primary channel
- * the highest priority.
- */
- primary_channel = (lahc->flags & AHC_PRIMARY_CHANNEL) + 'A';
- value = -1;
- if (lahc->channel == primary_channel)
- value = 1;
- break;
- }
-#endif
- case AHC_EISA:
- if ((rahc->flags & AHC_BIOS_ENABLED) != 0) {
- value = rahc->platform_data->bios_address
- - lahc->platform_data->bios_address;
- } else {
- value = rahc->bsh.ioport
- - lahc->bsh.ioport;
- }
- break;
- default:
- panic("ahc_softc_sort: invalid bus type");
- }
- return (value);
-}
-
static void
ahc_linux_setup_tag_info_global(char *p)
{
@@ -1103,7 +941,6 @@ aic7xxx_setup(char *s)
#ifdef AHC_DEBUG
{ "debug", &ahc_debug },
#endif
- { "reverse_scan", &aic7xxx_reverse_scan },
{ "periodic_otag", &aic7xxx_periodic_otag },
{ "pci_parity", &aic7xxx_pci_parity },
{ "seltime", &aic7xxx_seltime },
@@ -1178,7 +1015,7 @@ ahc_linux_register_host(struct ahc_softc
host->max_lun = AHC_NUM_LUNS;
host->max_channel = (ahc->features & AHC_TWIN) ? 1 : 0;
host->sg_tablesize = AHC_NSEG;
- ahc_set_unit(ahc, ahc_linux_next_unit());
+ ahc_set_unit(ahc, ahc_linux_unit++);
sprintf(buf, "scsi%d", host->host_no);
new_name = malloc(strlen(buf) + 1, M_DEVBUF, M_NOWAIT);
if (new_name != NULL) {
@@ -1207,29 +1044,6 @@ ahc_linux_get_memsize(void)
}
/*
- * Find the smallest available unit number to use
- * for a new device. We don't just use a static
- * count to handle the "repeated hot-(un)plug"
- * scenario.
- */
-static int
-ahc_linux_next_unit(void)
-{
- struct ahc_softc *ahc;
- int unit;
-
- unit = 0;
-retry:
- TAILQ_FOREACH(ahc, &ahc_tailq, links) {
- if (ahc->unit == unit) {
- unit++;
- goto retry;
- }
- }
- return (unit);
-}
-
-/*
* Place the SCSI bus into a known state by either resetting it,
* or forcing transfer negotiations on the next command to any
* target.
@@ -2633,6 +2447,11 @@ static void ahc_linux_set_dt(struct scsi
ahc_unlock(ahc, &flags);
}
+#if 0
+/* FIXME: This code claims to support IU and QAS. However, the actual
+ * sequencer code and aic7xxx_core have no support for these parameters and
+ * will get into a bad state if they're negotiated. Do not enable this
+ * unless you know what you're doing */
static void ahc_linux_set_qas(struct scsi_target *starget, int qas)
{
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
@@ -2688,6 +2507,7 @@ static void ahc_linux_set_iu(struct scsi
ppr_options, AHC_TRANS_GOAL, FALSE);
ahc_unlock(ahc, &flags);
}
+#endif
static struct spi_function_template ahc_linux_transport_functions = {
.set_offset = ahc_linux_set_offset,
@@ -2698,10 +2518,12 @@ static struct spi_function_template ahc_
.show_width = 1,
.set_dt = ahc_linux_set_dt,
.show_dt = 1,
+#if 0
.set_iu = ahc_linux_set_iu,
.show_iu = 1,
.set_qas = ahc_linux_set_qas,
.show_qas = 1,
+#endif
};
@@ -2709,18 +2531,25 @@ static struct spi_function_template ahc_
static int __init
ahc_linux_init(void)
{
- ahc_linux_transport_template = spi_attach_transport(&ahc_linux_transport_functions);
+ /*
+ * If we've been passed any parameters, process them now.
+ */
+ if (aic7xxx)
+ aic7xxx_setup(aic7xxx);
+
+ ahc_linux_transport_template =
+ spi_attach_transport(&ahc_linux_transport_functions);
if (!ahc_linux_transport_template)
return -ENODEV;
+
scsi_transport_reserve_target(ahc_linux_transport_template,
sizeof(struct ahc_linux_target));
scsi_transport_reserve_device(ahc_linux_transport_template,
sizeof(struct ahc_linux_device));
- if (ahc_linux_detect(&aic7xxx_driver_template))
- return 0;
- spi_release_transport(ahc_linux_transport_template);
- ahc_linux_exit();
- return -ENODEV;
+
+ ahc_linux_pci_init();
+ ahc_linux_eisa_init();
+ return 0;
}
static void
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.h b/drivers/scsi/aic7xxx/aic7xxx_osm.h
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.h
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.h
@@ -132,7 +132,6 @@ typedef struct scsi_cmnd *ahc_io_ct
/************************* Configuration Data *********************************/
extern u_int aic7xxx_no_probe;
extern u_int aic7xxx_allow_memio;
-extern int aic7xxx_detect_complete;
extern struct scsi_host_template aic7xxx_driver_template;
/***************************** Bus Space/DMA **********************************/
@@ -510,15 +509,6 @@ void ahc_format_transinfo(struct info_st
/******************************** Locking *************************************/
/* Lock protecting internal data structures */
-static __inline void ahc_lockinit(struct ahc_softc *);
-static __inline void ahc_lock(struct ahc_softc *, unsigned long *flags);
-static __inline void ahc_unlock(struct ahc_softc *, unsigned long *flags);
-
-/* Lock held during ahc_list manipulation and ahc softc frees */
-extern spinlock_t ahc_list_spinlock;
-static __inline void ahc_list_lockinit(void);
-static __inline void ahc_list_lock(unsigned long *flags);
-static __inline void ahc_list_unlock(unsigned long *flags);
static __inline void
ahc_lockinit(struct ahc_softc *ahc)
@@ -538,24 +528,6 @@ ahc_unlock(struct ahc_softc *ahc, unsign
spin_unlock_irqrestore(&ahc->platform_data->spin_lock, *flags);
}
-static __inline void
-ahc_list_lockinit(void)
-{
- spin_lock_init(&ahc_list_spinlock);
-}
-
-static __inline void
-ahc_list_lock(unsigned long *flags)
-{
- spin_lock_irqsave(&ahc_list_spinlock, *flags);
-}
-
-static __inline void
-ahc_list_unlock(unsigned long *flags)
-{
- spin_unlock_irqrestore(&ahc_list_spinlock, *flags);
-}
-
/******************************* PCI Definitions ******************************/
/*
* PCIM_xxx: mask to locate subfield in register
@@ -892,7 +864,6 @@ int ahc_platform_abort_scbs(struct ahc_s
irqreturn_t
ahc_linux_isr(int irq, void *dev_id, struct pt_regs * regs);
void ahc_platform_flushwork(struct ahc_softc *ahc);
-int ahc_softc_comp(struct ahc_softc *, struct ahc_softc *);
void ahc_done(struct ahc_softc*, struct scb*);
void ahc_send_async(struct ahc_softc *, char channel,
u_int target, u_int lun, ac_code, void *);
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
--- a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
@@ -143,10 +143,6 @@ ahc_linux_pci_dev_remove(struct pci_dev
struct ahc_softc *ahc = pci_get_drvdata(pdev);
u_long s;
- ahc_list_lock(&s);
- TAILQ_REMOVE(&ahc_tailq, ahc, links);
- ahc_list_unlock(&s);
-
ahc_lock(ahc, &s);
ahc_intr_enable(ahc, FALSE);
ahc_unlock(ahc, &s);
@@ -208,8 +204,7 @@ ahc_linux_pci_dev_probe(struct pci_dev *
return (-error);
}
pci_set_drvdata(pdev, ahc);
- if (aic7xxx_detect_complete)
- ahc_linux_register_host(ahc, &aic7xxx_driver_template);
+ ahc_linux_register_host(ahc, &aic7xxx_driver_template);
return (0);
}
diff --git a/drivers/scsi/aic7xxx/aic7xxx_pci.c b/drivers/scsi/aic7xxx/aic7xxx_pci.c
--- a/drivers/scsi/aic7xxx/aic7xxx_pci.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_pci.c
@@ -704,7 +704,6 @@ ahc_find_pci_device(ahc_dev_softc_t pci)
int
ahc_pci_config(struct ahc_softc *ahc, struct ahc_pci_identity *entry)
{
- u_long l;
u_int command;
u_int our_id;
u_int sxfrctl1;
@@ -964,12 +963,7 @@ ahc_pci_config(struct ahc_softc *ahc, st
if (error != 0)
return (error);
- ahc_list_lock(&l);
- /*
- * Link this softc in with all other ahc instances.
- */
- ahc_softc_insert(ahc);
- ahc_list_unlock(&l);
+ ahc->init_level++;
return (0);
}
diff --git a/drivers/scsi/aic7xxx/aic7xxx_proc.c b/drivers/scsi/aic7xxx/aic7xxx_proc.c
--- a/drivers/scsi/aic7xxx/aic7xxx_proc.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_proc.c
@@ -155,9 +155,9 @@ ahc_dump_target_state(struct ahc_softc *
copy_info(info, "\tUser: ");
ahc_format_transinfo(info, &tinfo->user);
starget = ahc->platform_data->starget[target_offset];
- targ = scsi_transport_target_data(starget);
- if (targ == NULL)
+ if (!starget)
return;
+ targ = scsi_transport_target_data(starget);
copy_info(info, "\tGoal: ");
ahc_format_transinfo(info, &tinfo->goal);
diff --git a/drivers/scsi/aic7xxx_old.c b/drivers/scsi/aic7xxx_old.c
--- a/drivers/scsi/aic7xxx_old.c
+++ b/drivers/scsi/aic7xxx_old.c
@@ -8448,7 +8448,6 @@ aic7xxx_alloc(Scsi_Host_Template *sht, s
}
p->host_no = host->host_no;
}
- scsi_set_device(host, &p->pdev->dev);
return (p);
}
diff --git a/drivers/scsi/cpqfcTSinit.c b/drivers/scsi/cpqfcTSinit.c
--- a/drivers/scsi/cpqfcTSinit.c
+++ b/drivers/scsi/cpqfcTSinit.c
@@ -336,7 +336,6 @@ int cpqfcTS_detect(Scsi_Host_Template *S
DEBUG_PCI(printk(" PciDev->baseaddress[3]= %lx\n",
PciDev->resource[3].start));
- scsi_set_device(HostAdapter, &PciDev->dev);
HostAdapter->irq = PciDev->irq; // copy for Scsi layers
// HP Tachlite uses two (255-byte) ranges of Port I/O (lower & upper),
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -382,7 +382,6 @@ static int adpt_queue(struct scsi_cmnd *
{
adpt_hba* pHba = NULL;
struct adpt_device* pDev = NULL; /* dpt per device information */
- ulong timeout = jiffies + (TMOUT_SCSI*HZ);
cmd->scsi_done = done;
/*
@@ -418,11 +417,6 @@ static int adpt_queue(struct scsi_cmnd *
return 1;
}
- if(cmd->eh_state != SCSI_STATE_QUEUED){
- // If we are not doing error recovery
- mod_timer(&cmd->eh_timeout, timeout);
- }
-
// TODO if the cmd->device if offline then I may need to issue a bus rescan
// followed by a get_lct to see if the device is there anymore
if((pDev = (struct adpt_device*) (cmd->device->hostdata)) == NULL) {
diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c
--- a/drivers/scsi/eata.c
+++ b/drivers/scsi/eata.c
@@ -1899,16 +1899,6 @@ static int eata2x_eh_abort(struct scsi_c
printk("%s: abort, mbox %d, interrupt pending.\n",
ha->board_name, i);
- if (SCarg->eh_state == SCSI_STATE_TIMEOUT) {
- unmap_dma(i, ha);
- SCarg->host_scribble = NULL;
- ha->cp_stat[i] = FREE;
- printk
- ("%s, abort, mbox %d, eh_state timeout, pid %ld.\n",
- ha->board_name, i, SCarg->pid);
- return SUCCESS;
- }
-
return FAILED;
}
diff --git a/drivers/scsi/eata_pio.c b/drivers/scsi/eata_pio.c
--- a/drivers/scsi/eata_pio.c
+++ b/drivers/scsi/eata_pio.c
@@ -449,7 +449,7 @@ static int eata_pio_abort(struct scsi_cm
{
uint loop = HZ;
- DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_abort called pid: %ld " "target: %x lun: %x reason %x\n", cmd->pid, cmd->device->id, cmd->device->lun, cmd->abort_reason));
+ DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_abort called pid: %ld " "target: %x lun: %x\n", cmd->pid, cmd->device->id, cmd->device->lun));
while (inb(cmd->device->host->base + HA_RAUXSTAT) & HA_ABUSY)
@@ -484,7 +484,7 @@ static int eata_pio_host_reset(struct sc
struct scsi_cmnd *sp;
struct Scsi_Host *host = cmd->device->host;
- DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset called pid:%ld target:" " %x lun: %x reason %x\n", cmd->pid, cmd->device->id, cmd->device->lun, cmd->abort_reason));
+ DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset called pid:%ld target:" " %x lun: %x\n", cmd->pid, cmd->device->id, cmd->device->lun));
spin_lock_irq(host->host_lock);
diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c
--- a/drivers/scsi/fdomain.c
+++ b/drivers/scsi/fdomain.c
@@ -938,7 +938,6 @@ struct Scsi_Host *__fdomain_16x0_detect(
}
shpnt->irq = interrupt_level;
shpnt->io_port = port_base;
- scsi_set_device(shpnt, &pdev->dev);
shpnt->n_io_port = 0x10;
print_banner( shpnt );
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -4521,9 +4521,7 @@ static int __init gdth_detect(Scsi_Host_
ha->virt_bus = hdr_channel;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
- scsi_set_device(shp, &pcistr[ctr].pdev->dev);
-#else
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
scsi_set_pci_device(shp, pcistr[ctr].pdev);
#endif
if (!(ha->cache_feat & ha->raw_feat & ha->screen_feat &GDT_64BIT)||
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -180,11 +180,6 @@ static void scsi_host_dev_release(struct
scsi_destroy_command_freelist(shost);
kfree(shost->shost_data);
- /*
- * Some drivers (eg aha1542) do scsi_register()/scsi_unregister()
- * during probing without performing a scsi_set_device() in between.
- * In this case dev->parent is NULL.
- */
if (parent)
put_device(parent);
kfree(shost);
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -87,7 +87,7 @@ static int max_channel = 3;
static int init_timeout = 5;
static int max_requests = 50;
-#define IBMVSCSI_VERSION "1.5.5"
+#define IBMVSCSI_VERSION "1.5.6"
MODULE_DESCRIPTION("IBM Virtual SCSI");
MODULE_AUTHOR("Dave Boutcher");
@@ -675,8 +675,6 @@ static void send_mad_adapter_info(struct
struct viosrp_adapter_info *req;
struct srp_event_struct *evt_struct;
- memset(&hostdata->madapter_info, 0x00, sizeof(hostdata->madapter_info));
-
evt_struct = get_event_struct(&hostdata->pool);
if (!evt_struct) {
printk(KERN_ERR "ibmvscsi: couldn't allocate an event "
diff --git a/drivers/scsi/ibmvscsi/rpa_vscsi.c b/drivers/scsi/ibmvscsi/rpa_vscsi.c
--- a/drivers/scsi/ibmvscsi/rpa_vscsi.c
+++ b/drivers/scsi/ibmvscsi/rpa_vscsi.c
@@ -33,6 +33,10 @@
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include "ibmvscsi.h"
+#include "srp.h"
+
+static char partition_name[97] = "UNKNOWN";
+static unsigned int partition_number = -1;
/* ------------------------------------------------------------
* Routines for managing the command/response queue
@@ -148,6 +152,48 @@ static void ibmvscsi_task(void *data)
}
}
+static void gather_partition_info(void)
+{
+ struct device_node *rootdn;
+
+ char *ppartition_name;
+ unsigned int *p_number_ptr;
+
+ /* Retrieve information about this partition */
+ rootdn = find_path_device("/");
+ if (!rootdn) {
+ return;
+ }
+
+ ppartition_name =
+ get_property(rootdn, "ibm,partition-name", NULL);
+ if (ppartition_name)
+ strncpy(partition_name, ppartition_name,
+ sizeof(partition_name));
+ p_number_ptr =
+ (unsigned int *)get_property(rootdn, "ibm,partition-no",
+ NULL);
+ if (p_number_ptr)
+ partition_number = *p_number_ptr;
+}
+
+static void set_adapter_info(struct ibmvscsi_host_data *hostdata)
+{
+ memset(&hostdata->madapter_info, 0x00,
+ sizeof(hostdata->madapter_info));
+
+ printk(KERN_INFO "rpa_vscsi: SPR_VERSION: %s\n", SRP_VERSION);
+ strcpy(hostdata->madapter_info.srp_version, SRP_VERSION);
+
+ strncpy(hostdata->madapter_info.partition_name, partition_name,
+ sizeof(hostdata->madapter_info.partition_name));
+
+ hostdata->madapter_info.partition_number = partition_number;
+
+ hostdata->madapter_info.mad_version = 1;
+ hostdata->madapter_info.os_type = 2;
+}
+
/**
* initialize_crq_queue: - Initializes and registers CRQ with hypervisor
* @queue: crq_queue to initialize and register
@@ -177,6 +223,9 @@ int ibmvscsi_init_crq_queue(struct crq_q
if (dma_mapping_error(queue->msg_token))
goto map_failed;
+ gather_partition_info();
+ set_adapter_info(hostdata);
+
rc = plpar_hcall_norets(H_REG_CRQ,
vdev->unit_address,
queue->msg_token, PAGE_SIZE);
@@ -246,6 +295,8 @@ void ibmvscsi_reset_crq_queue(struct crq
memset(queue->msgs, 0x00, PAGE_SIZE);
queue->cur = 0;
+ set_adapter_info(hostdata);
+
/* And re-open it again */
rc = plpar_hcall_norets(H_REG_CRQ,
vdev->unit_address,
diff --git a/drivers/scsi/ibmvscsi/srp.h b/drivers/scsi/ibmvscsi/srp.h
--- a/drivers/scsi/ibmvscsi/srp.h
+++ b/drivers/scsi/ibmvscsi/srp.h
@@ -28,6 +28,8 @@
#ifndef SRP_H
#define SRP_H
+#define SRP_VERSION "16.a"
+
#define PACKED __attribute__((packed))
enum srp_types {
diff --git a/drivers/scsi/ips.h b/drivers/scsi/ips.h
--- a/drivers/scsi/ips.h
+++ b/drivers/scsi/ips.h
@@ -111,7 +111,7 @@
#define IPS_UNREGISTER_HOSTS(SHT)
#define IPS_ADD_HOST(shost,device) do { scsi_add_host(shost,device); scsi_scan_host(shost); } while (0)
#define IPS_REMOVE_HOST(shost) scsi_remove_host(shost)
- #define IPS_SCSI_SET_DEVICE(sh,ha) scsi_set_device(sh, &(ha)->pcidev->dev)
+ #define IPS_SCSI_SET_DEVICE(sh,ha) do { } while (0)
#define IPS_PRINTK(level, pcidev, format, arg...) \
dev_printk(level , &((pcidev)->dev) , format , ## arg)
#endif
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -2864,7 +2864,7 @@ static void ata_qc_timeout(struct ata_qu
if (qc->dev->class == ATA_DEV_ATAPI && qc->scsicmd) {
struct scsi_cmnd *cmd = qc->scsicmd;
- if (!scsi_eh_eflags_chk(cmd, SCSI_EH_CANCEL_CMD)) {
+ if (!(cmd->eh_eflags & SCSI_EH_CANCEL_CMD)) {
/* finish completing original command */
__ata_qc_complete(qc);
@@ -3748,7 +3748,7 @@ static void ata_host_init(struct ata_por
host->max_channel = 1;
host->unique_id = ata_unique_id++;
host->max_cmd_len = 12;
- scsi_set_device(host, ent->dev);
+
scsi_assign_lock(host, &host_set->lock);
ap->flags = ATA_FLAG_PORT_DISABLED;
diff --git a/drivers/scsi/lpfc/Makefile b/drivers/scsi/lpfc/Makefile
--- a/drivers/scsi/lpfc/Makefile
+++ b/drivers/scsi/lpfc/Makefile
@@ -1,26 +1,24 @@
#/*******************************************************************
# * This file is part of the Emulex Linux Device Driver for *
-# * Enterprise Fibre Channel Host Bus Adapters. *
-# * Refer to the README file included with this package for *
-# * driver version and adapter support. *
-# * Copyright (C) 2004 Emulex Corporation. *
+# * Fibre Channel Host Bus Adapters. *
+# * Copyright (C) 2004-2005 Emulex. All rights reserved. *
+# * EMULEX and SLI are trademarks of Emulex. *
# * www.emulex.com *
# * *
# * This program is free software; you can redistribute it and/or *
-# * modify it under the terms of the GNU General Public License *
-# * as published by the Free Software Foundation; either version 2 *
-# * of the License, or (at your option) any later version. *
-# * *
-# * This program is distributed in the hope that it will be useful, *
-# * but WITHOUT ANY WARRANTY; without even the implied warranty of *
-# * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
-# * GNU General Public License for more details, a copy of which *
-# * can be found in the file COPYING included with this package. *
+# * modify it under the terms of version 2 of the GNU General *
+# * Public License as published by the Free Software Foundation. *
+# * This program is distributed in the hope that it will be useful. *
+# * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+# * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+# * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+# * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+# * TO BE LEGALLY INVALID. See the GNU General Public License for *
+# * more details, a copy of which can be found in the file COPYING *
+# * included with this package. *
# *******************************************************************/
######################################################################
-#$Id: Makefile 1.58 2005/01/23 19:00:32EST sf_support Exp $
-
ifneq ($(GCOV),)
EXTRA_CFLAGS += -fprofile-arcs -ftest-coverage
EXTRA_CFLAGS += -O0
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1,27 +1,24 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
- * Enterprise Fibre Channel Host Bus Adapters. *
- * Refer to the README file included with this package for *
- * driver version and adapter support. *
- * Copyright (C) 2004 Emulex Corporation. *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2004-2005 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
+ * Portions Copyright (C) 2004-2005 Christoph Hellwig *
* *
* This program is free software; you can redistribute it and/or *
- * modify it under the terms of the GNU General Public License *
- * as published by the Free Software Foundation; either version 2 *
- * of the License, or (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details, a copy of which *
- * can be found in the file COPYING included with this package. *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
*******************************************************************/
-/*
- * $Id: lpfc.h 1.167 2005/04/07 08:47:05EDT sf_support Exp $
- */
-
struct lpfc_sli2_slim;
#define LPFC_MAX_TARGET 256 /* max targets supported */
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1,27 +1,24 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
- * Enterprise Fibre Channel Host Bus Adapters. *
- * Refer to the README file included with this package for *
- * driver version and adapter support. *
- * Copyright (C) 2004 Emulex Corporation. *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2004-2005 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
+ * Portions Copyright (C) 2004-2005 Christoph Hellwig *
* *
* This program is free software; you can redistribute it and/or *
- * modify it under the terms of the GNU General Public License *
- * as published by the Free Software Foundation; either version 2 *
- * of the License, or (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details, a copy of which *
- * can be found in the file COPYING included with this package. *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
*******************************************************************/
-/*
- * $Id: lpfc_attr.c 1.24 2005/04/13 11:58:55EDT sf_support Exp $
- */
-
#include <linux/ctype.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
diff --git a/drivers/scsi/lpfc/lpfc_compat.h b/drivers/scsi/lpfc/lpfc_compat.h
--- a/drivers/scsi/lpfc/lpfc_compat.h
+++ b/drivers/scsi/lpfc/lpfc_compat.h
@@ -1,26 +1,24 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
- * Enterprise Fibre Channel Host Bus Adapters. *
- * Refer to the README file included with this package for *
- * driver version and adapter support. *
- * Copyright (C) 2004 Emulex Corporation. *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2004-2005 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
* This program is free software; you can redistribute it and/or *
- * modify it under the terms of the GNU General Public License *
- * as published by the Free Software Foundation; either version 2 *
- * of the License, or (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details, a copy of which *
- * can be found in the file COPYING included with this package. *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
*******************************************************************/
/*
- * $Id: lpfc_compat.h 1.32 2005/01/25 17:51:45EST sf_support Exp $
- *
* This file provides macros to aid compilation in the Linux 2.4 kernel
* over various platform architectures.
*/
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -1,27 +1,23 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
- * Enterprise Fibre Channel Host Bus Adapters. *
- * Refer to the README file included with this package for *
- * driver version and adapter support. *
- * Copyright (C) 2004 Emulex Corporation. *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2004-2005 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
* This program is free software; you can redistribute it and/or *
- * modify it under the terms of the GNU General Public License *
- * as published by the Free Software Foundation; either version 2 *
- * of the License, or (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details, a copy of which *
- * can be found in the file COPYING included with this package. *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
*******************************************************************/
-/*
- * $Id: lpfc_crtn.h 1.166 2005/04/07 08:46:47EDT sf_support Exp $
- */
-
void lpfc_dump_mem(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t);
void lpfc_read_nv(struct lpfc_hba *, LPFC_MBOXQ_t *);
int lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb,
@@ -195,6 +191,9 @@ int lpfc_sli_issue_iocb_wait_high_priori
void lpfc_sli_wake_iocb_high_priority(struct lpfc_hba * phba,
struct lpfc_iocbq * queue1,
struct lpfc_iocbq * queue2);
+void lpfc_sli_abort_fcp_cmpl(struct lpfc_hba * phba,
+ struct lpfc_iocbq * cmdiocb,
+ struct lpfc_iocbq * rspiocb);
void *lpfc_mbuf_alloc(struct lpfc_hba *, int, dma_addr_t *);
void lpfc_mbuf_free(struct lpfc_hba *, void *, dma_addr_t);
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -1,26 +1,24 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
- * Enterprise Fibre Channel Host Bus Adapters. *
- * Refer to the README file included with this package for *
- * driver version and adapter support. *
- * Copyright (C) 2004 Emulex Corporation. *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2004-2005 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
* This program is free software; you can redistribute it and/or *
- * modify it under the terms of the GNU General Public License *
- * as published by the Free Software Foundation; either version 2 *
- * of the License, or (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details, a copy of which *
- * can be found in the file COPYING included with this package. *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
*******************************************************************/
/*
- * $Id: lpfc_ct.c 1.161 2005/04/13 11:59:01EDT sf_support Exp $
- *
* Fibre Channel SCSI LAN Device Driver CT support
*/
diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h
--- a/drivers/scsi/lpfc/lpfc_disc.h
+++ b/drivers/scsi/lpfc/lpfc_disc.h
@@ -1,27 +1,23 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
- * Enterprise Fibre Channel Host Bus Adapters. *
- * Refer to the README file included with this package for *
- * driver version and adapter support. *
- * Copyright (C) 2004 Emulex Corporation. *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2004-2005 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
* This program is free software; you can redistribute it and/or *
- * modify it under the terms of the GNU General Public License *
- * as published by the Free Software Foundation; either version 2 *
- * of the License, or (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details, a copy of which *
- * can be found in the file COPYING included with this package. *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
*******************************************************************/
-/*
- * $Id: lpfc_disc.h 1.61 2005/04/07 08:46:52EDT sf_support Exp $
- */
-
#define FC_MAX_HOLD_RSCN 32 /* max number of deferred RSCNs */
#define FC_MAX_NS_RSP 65536 /* max size NameServer rsp */
#define FC_MAXLOOP 126 /* max devices supported on a fc loop */
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1,27 +1,24 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
- * Enterprise Fibre Channel Host Bus Adapters. *
- * Refer to the README file included with this package for *
- * driver version and adapter support. *
- * Copyright (C) 2004 Emulex Corporation. *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2004-2005 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
+ * Portions Copyright (C) 2004-2005 Christoph Hellwig *
* *
* This program is free software; you can redistribute it and/or *
- * modify it under the terms of the GNU General Public License *
- * as published by the Free Software Foundation; either version 2 *
- * of the License, or (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details, a copy of which *
- * can be found in the file COPYING included with this package. *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
*******************************************************************/
-/*
- * $Id: lpfc_els.c 1.186 2005/04/13 14:26:55EDT sf_support Exp $
- */
-
#include <linux/blkdev.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
@@ -3139,7 +3136,7 @@ lpfc_els_unsol_event(struct lpfc_hba * p
case ELS_CMD_PLOGI:
phba->fc_stat.elsRcvPLOGI++;
if (phba->hba_state < LPFC_DISC_AUTH) {
- rjt_err = LSEXP_NOTHING_MORE;
+ rjt_err = 1;
break;
}
lpfc_disc_state_machine(phba, ndlp, elsiocb, NLP_EVT_RCV_PLOGI);
@@ -3154,7 +3151,7 @@ lpfc_els_unsol_event(struct lpfc_hba * p
case ELS_CMD_LOGO:
phba->fc_stat.elsRcvLOGO++;
if (phba->hba_state < LPFC_DISC_AUTH) {
- rjt_err = LSEXP_NOTHING_MORE;
+ rjt_err = 1;
break;
}
lpfc_disc_state_machine(phba, ndlp, elsiocb, NLP_EVT_RCV_LOGO);
@@ -3162,7 +3159,7 @@ lpfc_els_unsol_event(struct lpfc_hba * p
case ELS_CMD_PRLO:
phba->fc_stat.elsRcvPRLO++;
if (phba->hba_state < LPFC_DISC_AUTH) {
- rjt_err = LSEXP_NOTHING_MORE;
+ rjt_err = 1;
break;
}
lpfc_disc_state_machine(phba, ndlp, elsiocb, NLP_EVT_RCV_PRLO);
@@ -3177,7 +3174,7 @@ lpfc_els_unsol_event(struct lpfc_hba * p
case ELS_CMD_ADISC:
phba->fc_stat.elsRcvADISC++;
if (phba->hba_state < LPFC_DISC_AUTH) {
- rjt_err = LSEXP_NOTHING_MORE;
+ rjt_err = 1;
break;
}
lpfc_disc_state_machine(phba, ndlp, elsiocb, NLP_EVT_RCV_ADISC);
@@ -3185,7 +3182,7 @@ lpfc_els_unsol_event(struct lpfc_hba * p
case ELS_CMD_PDISC:
phba->fc_stat.elsRcvPDISC++;
if (phba->hba_state < LPFC_DISC_AUTH) {
- rjt_err = LSEXP_NOTHING_MORE;
+ rjt_err = 1;
break;
}
lpfc_disc_state_machine(phba, ndlp, elsiocb, NLP_EVT_RCV_PDISC);
@@ -3209,7 +3206,7 @@ lpfc_els_unsol_event(struct lpfc_hba * p
case ELS_CMD_PRLI:
phba->fc_stat.elsRcvPRLI++;
if (phba->hba_state < LPFC_DISC_AUTH) {
- rjt_err = LSEXP_NOTHING_MORE;
+ rjt_err = 1;
break;
}
lpfc_disc_state_machine(phba, ndlp, elsiocb, NLP_EVT_RCV_PRLI);
@@ -3220,7 +3217,7 @@ lpfc_els_unsol_event(struct lpfc_hba * p
break;
default:
/* Unsupported ELS command, reject */
- rjt_err = LSEXP_NOTHING_MORE;
+ rjt_err = 1;
/* Unknown ELS command <elsCmd> received from NPORT <did> */
lpfc_printf_log(phba, KERN_ERR, LOG_ELS,
@@ -3236,7 +3233,7 @@ lpfc_els_unsol_event(struct lpfc_hba * p
if (rjt_err) {
stat.un.b.lsRjtRsvd0 = 0;
stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC;
- stat.un.b.lsRjtRsnCodeExp = rjt_err;
+ stat.un.b.lsRjtRsnCodeExp = LSEXP_NOTHING_MORE;
stat.un.b.vendorUnique = 0;
lpfc_els_rsp_reject(phba, stat.un.lsRjtError, elsiocb, ndlp);
}
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1,27 +1,24 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
- * Enterprise Fibre Channel Host Bus Adapters. *
- * Refer to the README file included with this package for *
- * driver version and adapter support. *
- * Copyright (C) 2004 Emulex Corporation. *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2004-2005 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
+ * Portions Copyright (C) 2004-2005 Christoph Hellwig *
* *
* This program is free software; you can redistribute it and/or *
- * modify it under the terms of the GNU General Public License *
- * as published by the Free Software Foundation; either version 2 *
- * of the License, or (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details, a copy of which *
- * can be found in the file COPYING included with this package. *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
*******************************************************************/
-/*
- * $Id: lpfc_hbadisc.c 1.266 2005/04/13 11:59:06EDT sf_support Exp $
- */
-
#include <linux/blkdev.h>
#include <linux/pci.h>
#include <linux/kthread.h>
@@ -61,14 +58,7 @@ static void lpfc_disc_timeout_handler(st
static void
lpfc_process_nodev_timeout(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
{
- if (!(ndlp->nlp_type & NLP_FABRIC)) {
- /* Nodev timeout on NPort <nlp_DID> */
- lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
- "%d:0203 Nodev timeout on NPort x%x "
- "Data: x%x x%x x%x\n",
- phba->brd_no, ndlp->nlp_DID, ndlp->nlp_flag,
- ndlp->nlp_state, ndlp->nlp_rpi);
- }
+ int warn_on = 0;
spin_lock_irq(phba->host->host_lock);
if (!(ndlp->nlp_flag & NLP_NODEV_TMO)) {
@@ -79,12 +69,27 @@ lpfc_process_nodev_timeout(struct lpfc_h
ndlp->nlp_flag &= ~NLP_NODEV_TMO;
if (ndlp->nlp_sid != NLP_NO_SID) {
+ warn_on = 1;
/* flush the target */
lpfc_sli_abort_iocb(phba, &phba->sli.ring[phba->sli.fcp_ring],
ndlp->nlp_sid, 0, 0, LPFC_CTX_TGT);
}
spin_unlock_irq(phba->host->host_lock);
+ if (warn_on) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+ "%d:0203 Nodev timeout on NPort x%x "
+ "Data: x%x x%x x%x\n",
+ phba->brd_no, ndlp->nlp_DID, ndlp->nlp_flag,
+ ndlp->nlp_state, ndlp->nlp_rpi);
+ } else {
+ lpfc_printf_log(phba, KERN_INFO, LOG_DISCOVERY,
+ "%d:0204 Nodev timeout on NPort x%x "
+ "Data: x%x x%x x%x\n",
+ phba->brd_no, ndlp->nlp_DID, ndlp->nlp_flag,
+ ndlp->nlp_state, ndlp->nlp_rpi);
+ }
+
lpfc_disc_state_machine(phba, ndlp, NULL, NLP_EVT_DEVICE_RM);
return;
}
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1,27 +1,23 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
- * Enterprise Fibre Channel Host Bus Adapters. *
- * Refer to the README file included with this package for *
- * driver version and adapter support. *
- * Copyright (C) 2004 Emulex Corporation. *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2004-2005 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
* This program is free software; you can redistribute it and/or *
- * modify it under the terms of the GNU General Public License *
- * as published by the Free Software Foundation; either version 2 *
- * of the License, or (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details, a copy of which *
- * can be found in the file COPYING included with this package. *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
*******************************************************************/
-/*
- * $Id: lpfc_hw.h 1.37 2005/03/29 19:51:45EST sf_support Exp $
- */
-
#define FDMI_DID 0xfffffaU
#define NameServer_DID 0xfffffcU
#define SCR_DID 0xfffffdU
@@ -2214,20 +2210,20 @@ typedef union {
* SLI-2 specific structures
*/
-typedef struct {
- uint32_t cmdPutInx;
- uint32_t rspGetInx;
-} HGP;
+struct lpfc_hgp {
+ __le32 cmdPutInx;
+ __le32 rspGetInx;
+};
-typedef struct {
- uint32_t cmdGetInx;
- uint32_t rspPutInx;
-} PGP;
+struct lpfc_pgp {
+ __le32 cmdGetInx;
+ __le32 rspPutInx;
+};
typedef struct _SLI2_DESC {
- HGP host[MAX_RINGS];
+ struct lpfc_hgp host[MAX_RINGS];
uint32_t unused1[16];
- PGP port[MAX_RINGS];
+ struct lpfc_pgp port[MAX_RINGS];
} SLI2_DESC;
typedef union {
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1,27 +1,24 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
- * Enterprise Fibre Channel Host Bus Adapters. *
- * Refer to the README file included with this package for *
- * driver version and adapter support. *
- * Copyright (C) 2004 Emulex Corporation. *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2004-2005 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
+ * Portions Copyright (C) 2004-2005 Christoph Hellwig *
* *
* This program is free software; you can redistribute it and/or *
- * modify it under the terms of the GNU General Public License *
- * as published by the Free Software Foundation; either version 2 *
- * of the License, or (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details, a copy of which *
- * can be found in the file COPYING included with this package. *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
*******************************************************************/
-/*
- * $Id: lpfc_init.c 1.233 2005/04/13 11:59:09EDT sf_support Exp $
- */
-
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
@@ -780,6 +777,9 @@ lpfc_get_hba_model_desc(struct lpfc_hba
pci_read_config_dword(phba->pcidev, PCI_VENDOR_ID, &id);
switch ((id >> 16) & 0xffff) {
+ case PCI_DEVICE_ID_FIREFLY:
+ strcpy(str, "LP6000 1");
+ break;
case PCI_DEVICE_ID_SUPERFLY:
if (vp->rev.biuRev >= 1 && vp->rev.biuRev <= 3)
strcpy(str, "LP7000 1");
@@ -837,6 +837,9 @@ lpfc_get_hba_model_desc(struct lpfc_hba
case PCI_DEVICE_ID_LP10000S:
strcpy(str, "LP10000-S 2");
break;
+ default:
+ memset(str, 0, 16);
+ break;
}
if (mdp)
sscanf(str, "%s", mdp);
@@ -1662,6 +1665,8 @@ lpfc_pci_remove_one(struct pci_dev *pdev
static struct pci_device_id lpfc_id_table[] = {
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_VIPER,
PCI_ANY_ID, PCI_ANY_ID, },
+ {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_FIREFLY,
+ PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_THOR,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PEGASUS,
@@ -1712,6 +1717,7 @@ lpfc_init(void)
int error = 0;
printk(LPFC_MODULE_DESC "\n");
+ printk(LPFC_COPYRIGHT "\n");
lpfc_transport_template =
fc_attach_transport(&lpfc_transport_functions);
diff --git a/drivers/scsi/lpfc/lpfc_logmsg.h b/drivers/scsi/lpfc/lpfc_logmsg.h
--- a/drivers/scsi/lpfc/lpfc_logmsg.h
+++ b/drivers/scsi/lpfc/lpfc_logmsg.h
@@ -1,27 +1,23 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
- * Enterprise Fibre Channel Host Bus Adapters. *
- * Refer to the README file included with this package for *
- * driver version and adapter support. *
- * Copyright (C) 2004 Emulex Corporation. *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2004-2005 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
* This program is free software; you can redistribute it and/or *
- * modify it under the terms of the GNU General Public License *
- * as published by the Free Software Foundation; either version 2 *
- * of the License, or (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details, a copy of which *
- * can be found in the file COPYING included with this package. *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
*******************************************************************/
-/*
- * $Id: lpfc_logmsg.h 1.32 2005/01/25 17:52:01EST sf_support Exp $
- */
-
#define LOG_ELS 0x1 /* ELS events */
#define LOG_DISCOVERY 0x2 /* Link discovery events */
#define LOG_MBOX 0x4 /* Mailbox events */
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1,27 +1,24 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
- * Enterprise Fibre Channel Host Bus Adapters. *
- * Refer to the README file included with this package for *
- * driver version and adapter support. *
- * Copyright (C) 2004 Emulex Corporation. *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2004-2005 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
+ * Portions Copyright (C) 2004-2005 Christoph Hellwig *
* *
* This program is free software; you can redistribute it and/or *
- * modify it under the terms of the GNU General Public License *
- * as published by the Free Software Foundation; either version 2 *
- * of the License, or (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details, a copy of which *
- * can be found in the file COPYING included with this package. *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
*******************************************************************/
-/*
- * $Id: lpfc_mbox.c 1.85 2005/04/13 11:59:11EDT sf_support Exp $
- */
-
#include <linux/blkdev.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
@@ -422,7 +419,6 @@ lpfc_config_pcb_setup(struct lpfc_hba *
uint32_t iocbCnt;
int i;
- psli->MBhostaddr = (uint32_t *)&phba->slim2p->mbx;
pcbp->maxRing = (psli->num_rings - 1);
iocbCnt = 0;
@@ -528,7 +524,7 @@ lpfc_config_port(struct lpfc_hba * phba,
dma_addr_t pdma_addr;
uint32_t bar_low, bar_high;
size_t offset;
- HGP hgp;
+ struct lpfc_hgp hgp;
void __iomem *to_slim;
memset(pmb, 0, sizeof(LPFC_MBOXQ_t));
@@ -584,9 +580,9 @@ lpfc_config_port(struct lpfc_hba * phba,
else
phba->slim2p->pcb.hgpAddrHigh = 0;
/* write HGP data to SLIM at the required longword offset */
- memset(&hgp, 0, sizeof(HGP));
+ memset(&hgp, 0, sizeof(struct lpfc_hgp));
to_slim = phba->MBslimaddr + (SLIMOFF*sizeof (uint32_t));
- lpfc_memcpy_to_slim(to_slim, &hgp, sizeof (HGP));
+ lpfc_memcpy_to_slim(to_slim, &hgp, sizeof(struct lpfc_hgp));
/* Setup Port Group ring pointer */
offset = (uint8_t *)&phba->slim2p->mbx.us.s2.port -
diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -1,27 +1,24 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
- * Enterprise Fibre Channel Host Bus Adapters. *
- * Refer to the README file included with this package for *
- * driver version and adapter support. *
- * Copyright (C) 2004 Emulex Corporation. *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2004-2005 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
+ * Portions Copyright (C) 2004-2005 Christoph Hellwig *
* *
* This program is free software; you can redistribute it and/or *
- * modify it under the terms of the GNU General Public License *
- * as published by the Free Software Foundation; either version 2 *
- * of the License, or (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details, a copy of which *
- * can be found in the file COPYING included with this package. *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
*******************************************************************/
-/*
- * $Id: lpfc_mem.c 1.79 2005/04/13 14:25:50EDT sf_support Exp $
- */
-
#include <linux/mempool.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -1,27 +1,24 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
- * Enterprise Fibre Channel Host Bus Adapters. *
- * Refer to the README file included with this package for *
- * driver version and adapter support. *
- * Copyright (C) 2004 Emulex Corporation. *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2004-2005 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
+ * Portions Copyright (C) 2004-2005 Christoph Hellwig *
* *
* This program is free software; you can redistribute it and/or *
- * modify it under the terms of the GNU General Public License *
- * as published by the Free Software Foundation; either version 2 *
- * of the License, or (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details, a copy of which *
- * can be found in the file COPYING included with this package. *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
*******************************************************************/
-/*
- * $Id: lpfc_nportdisc.c 1.179 2005/04/13 11:59:13EDT sf_support Exp $
- */
-
#include <linux/blkdev.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
@@ -950,8 +947,13 @@ lpfc_cmpl_adisc_adisc_issue(struct lpfc_
lpfc_unreg_rpi(phba, ndlp);
return (ndlp->nlp_state);
}
- ndlp->nlp_state = NLP_STE_MAPPED_NODE;
- lpfc_nlp_list(phba, ndlp, NLP_MAPPED_LIST);
+ if (ndlp->nlp_type & NLP_FCP_TARGET) {
+ ndlp->nlp_state = NLP_STE_MAPPED_NODE;
+ lpfc_nlp_list(phba, ndlp, NLP_MAPPED_LIST);
+ } else {
+ ndlp->nlp_state = NLP_STE_UNMAPPED_NODE;
+ lpfc_nlp_list(phba, ndlp, NLP_UNMAPPED_LIST);
+ }
return (ndlp->nlp_state);
}
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1,27 +1,24 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
- * Enterprise Fibre Channel Host Bus Adapters. *
- * Refer to the README file included with this package for *
- * driver version and adapter support. *
- * Copyright (C) 2004 Emulex Corporation. *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2004-2005 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
+ * Portions Copyright (C) 2004-2005 Christoph Hellwig *
* *
* This program is free software; you can redistribute it and/or *
- * modify it under the terms of the GNU General Public License *
- * as published by the Free Software Foundation; either version 2 *
- * of the License, or (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details, a copy of which *
- * can be found in the file COPYING included with this package. *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
*******************************************************************/
-/*
- * $Id: lpfc_scsi.c 1.37 2005/04/13 14:27:09EDT sf_support Exp $
- */
-
#include <linux/pci.h>
#include <linux/interrupt.h>
@@ -874,6 +871,7 @@ __lpfc_abort_handler(struct scsi_cmnd *c
else
icmd->ulpCommand = CMD_CLOSE_XRI_CN;
+ abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
if (lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0) ==
IOCB_ERROR) {
list_add_tail(&abtsiocb->list, lpfc_iocb_list);
@@ -1273,4 +1271,5 @@ struct scsi_host_template lpfc_template
.cmd_per_lun = LPFC_CMD_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = lpfc_host_attrs,
+ .max_sectors = 0xFFFF,
};
diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h
--- a/drivers/scsi/lpfc/lpfc_scsi.h
+++ b/drivers/scsi/lpfc/lpfc_scsi.h
@@ -1,27 +1,23 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
- * Enterprise Fibre Channel Host Bus Adapters. *
- * Refer to the README file included with this package for *
- * driver version and adapter support. *
- * Copyright (C) 2004 Emulex Corporation. *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2004-2005 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
* This program is free software; you can redistribute it and/or *
- * modify it under the terms of the GNU General Public License *
- * as published by the Free Software Foundation; either version 2 *
- * of the License, or (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details, a copy of which *
- * can be found in the file COPYING included with this package. *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
*******************************************************************/
-/*
- * $Id: lpfc_scsi.h 1.83 2005/04/07 08:47:43EDT sf_support Exp $
- */
-
struct lpfc_hba;
#define list_remove_head(list, entry, type, member) \
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1,27 +1,24 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
- * Enterprise Fibre Channel Host Bus Adapters. *
- * Refer to the README file included with this package for *
- * driver version and adapter support. *
- * Copyright (C) 2004 Emulex Corporation. *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2004-2005 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
+ * Portions Copyright (C) 2004-2005 Christoph Hellwig *
* *
* This program is free software; you can redistribute it and/or *
- * modify it under the terms of the GNU General Public License *
- * as published by the Free Software Foundation; either version 2 *
- * of the License, or (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details, a copy of which *
- * can be found in the file COPYING included with this package. *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
*******************************************************************/
-/*
- * $Id: lpfc_sli.c 1.232 2005/04/13 11:59:16EDT sf_support Exp $
- */
-
#include <linux/blkdev.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
@@ -225,8 +222,7 @@ lpfc_sli_ringtx_get(struct lpfc_hba * ph
static IOCB_t *
lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
{
- MAILBOX_t *mbox = (MAILBOX_t *)phba->sli.MBhostaddr;
- PGP *pgp = (PGP *)&mbox->us.s2.port[pring->ringno];
+ struct lpfc_pgp *pgp = &phba->slim2p->mbx.us.s2.port[pring->ringno];
uint32_t max_cmd_idx = pring->numCiocb;
IOCB_t *iocb = NULL;
@@ -411,9 +407,7 @@ lpfc_sli_resume_iocb(struct lpfc_hba * p
static void
lpfc_sli_turn_on_ring(struct lpfc_hba * phba, int ringno)
{
- PGP *pgp =
- ((PGP *) &
- (((MAILBOX_t *)phba->sli.MBhostaddr)->us.s2.port[ringno]));
+ struct lpfc_pgp *pgp = &phba->slim2p->mbx.us.s2.port[ringno];
/* If the ring is active, flag it */
if (phba->sli.ring[ringno].cmdringaddr) {
@@ -537,7 +531,7 @@ lpfc_sli_handle_mb_event(struct lpfc_hba
/* Get a Mailbox buffer to setup mailbox commands for callback */
if ((pmb = phba->sli.mbox_active)) {
pmbox = &pmb->mb;
- mbox = (MAILBOX_t *) phba->sli.MBhostaddr;
+ mbox = &phba->slim2p->mbx;
/* First check out the status word */
lpfc_sli_pcimem_bcopy(mbox, pmbox, sizeof (uint32_t));
@@ -905,10 +899,11 @@ static int
lpfc_sli_handle_fast_ring_event(struct lpfc_hba * phba,
struct lpfc_sli_ring * pring, uint32_t mask)
{
+ struct lpfc_pgp *pgp = &phba->slim2p->mbx.us.s2.port[pring->ringno];
IOCB_t *irsp = NULL;
+ IOCB_t *entry = NULL;
struct lpfc_iocbq *cmdiocbq = NULL;
struct lpfc_iocbq rspiocbq;
- PGP *pgp;
uint32_t status;
uint32_t portRspPut, portRspMax;
int rc = 1;
@@ -920,10 +915,6 @@ lpfc_sli_handle_fast_ring_event(struct l
spin_lock_irqsave(phba->host->host_lock, iflag);
pring->stats.iocb_event++;
- /* The driver assumes SLI-2 mode */
- pgp = (PGP *) &((MAILBOX_t *) phba->sli.MBhostaddr)
- ->us.s2.port[pring->ringno];
-
/*
* The next available response entry should never exceed the maximum
* entries. If it does, treat it as an adapter hardware error.
@@ -955,7 +946,17 @@ lpfc_sli_handle_fast_ring_event(struct l
rmb();
while (pring->rspidx != portRspPut) {
- irsp = (IOCB_t *) IOCB_ENTRY(pring->rspringaddr, pring->rspidx);
+ /*
+ * Fetch an entry off the ring and copy it into a local data
+ * structure. The copy involves a byte-swap since the
+ * network byte order and pci byte orders are different.
+ */
+ entry = (IOCB_t *) IOCB_ENTRY(pring->rspringaddr, pring->rspidx);
+ lpfc_sli_pcimem_bcopy((uint32_t *) entry,
+ (uint32_t *) &rspiocbq.iocb,
+ sizeof (IOCB_t));
+ irsp = &rspiocbq.iocb;
+
type = lpfc_sli_iocb_cmd_type(irsp->ulpCommand & CMD_IOCB_MASK);
pring->stats.iocb_rsp++;
rsp_cmpl++;
@@ -987,10 +988,6 @@ lpfc_sli_handle_fast_ring_event(struct l
break;
}
- rspiocbq.iocb.un.ulpWord[4] = irsp->un.ulpWord[4];
- rspiocbq.iocb.ulpStatus = irsp->ulpStatus;
- rspiocbq.iocb.ulpContext = irsp->ulpContext;
- rspiocbq.iocb.ulpIoTag = irsp->ulpIoTag;
cmdiocbq = lpfc_sli_txcmpl_ring_iotag_lookup(phba,
pring,
&rspiocbq);
@@ -1075,9 +1072,7 @@ lpfc_sli_handle_slow_ring_event(struct l
struct lpfc_iocbq *cmdiocbp;
struct lpfc_iocbq *saveq;
struct list_head *lpfc_iocb_list = &phba->lpfc_iocb_list;
- HGP *hgp;
- PGP *pgp;
- MAILBOX_t *mbox;
+ struct lpfc_pgp *pgp = &phba->slim2p->mbx.us.s2.port[pring->ringno];
uint8_t iocb_cmd_type;
lpfc_iocb_type type;
uint32_t status, free_saveq;
@@ -1089,11 +1084,6 @@ lpfc_sli_handle_slow_ring_event(struct l
spin_lock_irqsave(phba->host->host_lock, iflag);
pring->stats.iocb_event++;
- /* The driver assumes SLI-2 mode */
- mbox = (MAILBOX_t *) phba->sli.MBhostaddr;
- pgp = (PGP *) & mbox->us.s2.port[pring->ringno];
- hgp = (HGP *) & mbox->us.s2.host[pring->ringno];
-
/*
* The next available response entry should never exceed the maximum
* entries. If it does, treat it as an adapter hardware error.
@@ -1738,6 +1728,8 @@ lpfc_mbox_timeout_handler(struct lpfc_hb
return;
}
+ phba->work_hba_events &= ~WORKER_MBOX_TMO;
+
pmbox = phba->sli.mbox_active;
mb = &pmbox->mb;
@@ -1752,16 +1744,14 @@ lpfc_mbox_timeout_handler(struct lpfc_hb
phba->sli.sli_flag,
phba->sli.mbox_active);
- if (phba->sli.mbox_active == pmbox) {
- phba->sli.mbox_active = NULL;
- if (pmbox->mbox_cmpl) {
- mb->mbxStatus = MBX_NOT_FINISHED;
- spin_unlock_irq(phba->host->host_lock);
- (pmbox->mbox_cmpl) (phba, pmbox);
- spin_lock_irq(phba->host->host_lock);
- }
- phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ phba->sli.mbox_active = NULL;
+ if (pmbox->mbox_cmpl) {
+ mb->mbxStatus = MBX_NOT_FINISHED;
+ spin_unlock_irq(phba->host->host_lock);
+ (pmbox->mbox_cmpl) (phba, pmbox);
+ spin_lock_irq(phba->host->host_lock);
}
+ phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
spin_unlock_irq(phba->host->host_lock);
lpfc_mbox_abort(phba);
@@ -1771,7 +1761,6 @@ lpfc_mbox_timeout_handler(struct lpfc_hb
int
lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag)
{
- MAILBOX_t *mbox;
MAILBOX_t *mb;
struct lpfc_sli *psli;
uint32_t status, evtctr;
@@ -1901,15 +1890,13 @@ lpfc_sli_issue_mbox(struct lpfc_hba * ph
mb->mbxOwner = OWN_CHIP;
if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
-
/* First copy command data to host SLIM area */
- mbox = (MAILBOX_t *) psli->MBhostaddr;
- lpfc_sli_pcimem_bcopy(mb, mbox, MAILBOX_CMD_SIZE);
+ lpfc_sli_pcimem_bcopy(mb, &phba->slim2p->mbx, MAILBOX_CMD_SIZE);
} else {
if (mb->mbxCommand == MBX_CONFIG_PORT) {
/* copy command data into host mbox for cmpl */
- mbox = (MAILBOX_t *) psli->MBhostaddr;
- lpfc_sli_pcimem_bcopy(mb, mbox, MAILBOX_CMD_SIZE);
+ lpfc_sli_pcimem_bcopy(mb, &phba->slim2p->mbx,
+ MAILBOX_CMD_SIZE);
}
/* First copy mbox command data to HBA SLIM, skip past first
@@ -1946,8 +1933,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba * ph
psli->mbox_active = NULL;
if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
/* First read mbox status word */
- mbox = (MAILBOX_t *) psli->MBhostaddr;
- word0 = *((volatile uint32_t *)mbox);
+ word0 = *((volatile uint32_t *)&phba->slim2p->mbx);
word0 = le32_to_cpu(word0);
} else {
/* First read mbox status word */
@@ -1984,8 +1970,8 @@ lpfc_sli_issue_mbox(struct lpfc_hba * ph
if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
/* First copy command data */
- mbox = (MAILBOX_t *) psli->MBhostaddr;
- word0 = *((volatile uint32_t *)mbox);
+ word0 = *((volatile uint32_t *)
+ &phba->slim2p->mbx);
word0 = le32_to_cpu(word0);
if (mb->mbxCommand == MBX_CONFIG_PORT) {
MAILBOX_t *slimmb;
@@ -2009,10 +1995,9 @@ lpfc_sli_issue_mbox(struct lpfc_hba * ph
}
if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
- /* First copy command data */
- mbox = (MAILBOX_t *) psli->MBhostaddr;
/* copy results back to user */
- lpfc_sli_pcimem_bcopy(mbox, mb, MAILBOX_CMD_SIZE);
+ lpfc_sli_pcimem_bcopy(&phba->slim2p->mbx, mb,
+ MAILBOX_CMD_SIZE);
} else {
/* First copy command data */
lpfc_memcpy_from_slim(mb, phba->MBslimaddr,
@@ -2089,8 +2074,6 @@ lpfc_sli_issue_iocb(struct lpfc_hba *phb
switch (piocb->iocb.ulpCommand) {
case CMD_QUE_RING_BUF_CN:
case CMD_QUE_RING_BUF64_CN:
- case CMD_CLOSE_XRI_CN:
- case CMD_ABORT_XRI_CN:
/*
* For IOCBs, like QUE_RING_BUF, that have no rsp ring
* completion, iocb_cmpl MUST be 0.
@@ -2573,6 +2556,16 @@ lpfc_sli_sum_iocb(struct lpfc_hba *phba,
return sum;
}
+void
+lpfc_sli_abort_fcp_cmpl(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
+ struct lpfc_iocbq * rspiocb)
+{
+ spin_lock_irq(phba->host->host_lock);
+ list_add_tail(&cmdiocb->list, &phba->lpfc_iocb_list);
+ spin_unlock_irq(phba->host->host_lock);
+ return;
+}
+
int
lpfc_sli_abort_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
uint16_t tgt_id, uint64_t lun_id, uint32_t ctx,
@@ -2622,6 +2615,8 @@ lpfc_sli_abort_iocb(struct lpfc_hba *phb
else
abtsiocb->iocb.ulpCommand = CMD_CLOSE_XRI_CN;
+ /* Setup callback routine and issue the command. */
+ abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
ret_val = lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0);
if (ret_val == IOCB_ERROR) {
list_add_tail(&abtsiocb->list, lpfc_iocb_list);
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -1,27 +1,23 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
- * Enterprise Fibre Channel Host Bus Adapters. *
- * Refer to the README file included with this package for *
- * driver version and adapter support. *
- * Copyright (C) 2004 Emulex Corporation. *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2004-2005 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
* This program is free software; you can redistribute it and/or *
- * modify it under the terms of the GNU General Public License *
- * as published by the Free Software Foundation; either version 2 *
- * of the License, or (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details, a copy of which *
- * can be found in the file COPYING included with this package. *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
*******************************************************************/
-/*
- * $Id: lpfc_sli.h 1.42 2005/03/21 02:01:28EST sf_support Exp $
- */
-
/* forward declaration for LPFC_IOCB_t's use */
struct lpfc_hba;
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -1,32 +1,29 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
- * Enterprise Fibre Channel Host Bus Adapters. *
- * Refer to the README file included with this package for *
- * driver version and adapter support. *
- * Copyright (C) 2004 Emulex Corporation. *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2004-2005 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
* This program is free software; you can redistribute it and/or *
- * modify it under the terms of the GNU General Public License *
- * as published by the Free Software Foundation; either version 2 *
- * of the License, or (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details, a copy of which *
- * can be found in the file COPYING included with this package. *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
*******************************************************************/
-/*
- * $Id: lpfc_version.h 1.49 2005/04/13 15:07:19EDT sf_support Exp $
- */
-
-#define LPFC_DRIVER_VERSION "8.0.28"
+#define LPFC_DRIVER_VERSION "8.0.29"
#define LPFC_DRIVER_NAME "lpfc"
#define LPFC_MODULE_DESC "Emulex LightPulse Fibre Channel SCSI driver " \
LPFC_DRIVER_VERSION
+#define LPFC_COPYRIGHT "Copyright(c) 2004-2005 Emulex. All rights reserved."
#define DFC_API_VERSION "0.0.0"
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -35,6 +35,7 @@
#include <linux/blkdev.h>
#include <asm/uaccess.h>
#include <asm/io.h>
+#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/proc_fs.h>
#include <linux/reboot.h>
@@ -1938,7 +1939,7 @@ megaraid_abort(Scsi_Cmnd *cmd)
static int
-__megaraid_reset(Scsi_Cmnd *cmd)
+megaraid_reset(struct scsi_cmnd *cmd)
{
adapter_t *adapter;
megacmd_t mc;
@@ -1950,7 +1951,6 @@ __megaraid_reset(Scsi_Cmnd *cmd)
mc.cmd = MEGA_CLUSTER_CMD;
mc.opcode = MEGA_RESET_RESERVATIONS;
- spin_unlock_irq(&adapter->lock);
if( mega_internal_command(adapter, LOCK_INT, &mc, NULL) != 0 ) {
printk(KERN_WARNING
"megaraid: reservation reset failed.\n");
@@ -1958,9 +1958,10 @@ __megaraid_reset(Scsi_Cmnd *cmd)
else {
printk(KERN_INFO "megaraid: reservation reset.\n");
}
- spin_lock_irq(&adapter->lock);
#endif
+ spin_lock_irq(&adapter->lock);
+
rval = megaraid_abort_and_reset(adapter, cmd, SCB_RESET);
/*
@@ -1968,24 +1969,11 @@ __megaraid_reset(Scsi_Cmnd *cmd)
* to be communicated over to the mid layer.
*/
mega_rundoneq(adapter);
-
- return rval;
-}
-
-static int
-megaraid_reset(Scsi_Cmnd *cmd)
-{
- adapter_t *adapter = (adapter_t *)cmd->device->host->hostdata;
- int rc;
-
- spin_lock_irq(&adapter->lock);
- rc = __megaraid_reset(cmd);
spin_unlock_irq(&adapter->lock);
- return rc;
+ return rval;
}
-
/**
* megaraid_abort_and_reset()
* @adapter - megaraid soft state
@@ -4490,8 +4478,6 @@ mega_internal_command(adapter_t *adapter
scb->idx = CMDID_INT_CMDS;
- scmd->state = 0;
-
/*
* Get the lock only if the caller has not acquired it already
*/
@@ -4501,15 +4487,7 @@ mega_internal_command(adapter_t *adapter
if( ls == LOCK_INT ) spin_unlock_irqrestore(&adapter->lock, flags);
- /*
- * Wait till this command finishes. Do not use
- * wait_event_interruptible(). It causes panic if CTRL-C is hit when
- * dumping e.g., physical disk information through /proc interface.
- */
-#if 0
- wait_event_interruptible(adapter->int_waitq, scmd->state);
-#endif
- wait_event(adapter->int_waitq, scmd->state);
+ wait_for_completion(&adapter->int_waitq);
rval = scmd->result;
mc->status = scmd->result;
@@ -4543,16 +4521,7 @@ mega_internal_done(Scsi_Cmnd *scmd)
adapter = (adapter_t *)scmd->device->host->hostdata;
- scmd->state = 1; /* thread waiting for its command to complete */
-
- /*
- * See comment in mega_internal_command() routine for
- * wait_event_interruptible()
- */
-#if 0
- wake_up_interruptible(&adapter->int_waitq);
-#endif
- wake_up(&adapter->int_waitq);
+ complete(&adapter->int_waitq);
}
@@ -4874,7 +4843,7 @@ megaraid_probe_one(struct pci_dev *pdev,
}
init_MUTEX(&adapter->int_mtx);
- init_waitqueue_head(&adapter->int_waitq);
+ init_completion(&adapter->int_waitq);
adapter->this_id = DEFAULT_INITIATOR_ID;
adapter->host->this_id = DEFAULT_INITIATOR_ID;
diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h
--- a/drivers/scsi/megaraid.h
+++ b/drivers/scsi/megaraid.h
@@ -891,7 +891,7 @@ typedef struct {
Scsi_Cmnd int_scmd;
struct semaphore int_mtx; /* To synchronize the internal
commands */
- wait_queue_head_t int_waitq; /* wait queue for internal
+ struct completion int_waitq; /* wait queue for internal
cmds */
int has_cluster; /* cluster support on this HBA */
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -719,7 +719,6 @@ megaraid_io_attach(adapter_t *adapter)
// export the parameters required by the mid-layer
scsi_assign_lock(host, adapter->host_lock);
- scsi_set_device(host, &adapter->pdev->dev);
host->irq = adapter->irq;
host->unique_id = adapter->unique_id;
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -7756,7 +7756,6 @@ struct Scsi_Host * __init ncr_attach(str
* your module_init */
BUG_ON(!ncr53c8xx_transport_template);
instance->transportt = ncr53c8xx_transport_template;
- scsi_set_device(instance, device->dev);
/* Patch script to physical addresses */
ncr_script_fill(&script0, &scripth0);
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -2719,9 +2719,7 @@ static int nsp32_detect(Scsi_Host_Templa
host->unique_id = data->BaseAddress;
host->n_io_port = data->NumAddress;
host->base = (unsigned long)data->MmioAddress;
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,63))
- scsi_set_device(host, &PCIDEV->dev);
-#else
+#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,63))
scsi_set_pci_device(host, PCIDEV);
#endif
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -2853,7 +2853,7 @@ qla1280_bus_reset(struct scsi_qla_host *
ha->bus_settings[bus].failed_reset_count++;
} else {
spin_unlock_irq(HOST_LOCK);
- schedule_timeout(reset_delay * HZ);
+ ssleep(reset_delay);
spin_lock_irq(HOST_LOCK);
ha->bus_settings[bus].scsi_bus_dead = 0;
diff --git a/drivers/scsi/qlogicfc.c b/drivers/scsi/qlogicfc.c
--- a/drivers/scsi/qlogicfc.c
+++ b/drivers/scsi/qlogicfc.c
@@ -746,7 +746,6 @@ static int isp2x00_detect(Scsi_Host_Temp
printk("qlogicfc%d : could not register host.\n", hosts);
continue;
}
- scsi_set_device(host, &pdev->dev);
host->max_id = QLOGICFC_MAX_ID + 1;
host->max_lun = QLOGICFC_MAX_LUN;
hostdata = (struct isp2x00_hostdata *) host->hostdata;
diff --git a/drivers/scsi/qlogicisp.c b/drivers/scsi/qlogicisp.c
--- a/drivers/scsi/qlogicisp.c
+++ b/drivers/scsi/qlogicisp.c
@@ -694,7 +694,6 @@ static int isp1020_detect(Scsi_Host_Temp
memset(hostdata, 0, sizeof(struct isp1020_hostdata));
hostdata->pci_dev = pdev;
- scsi_set_device(host, &pdev->dev);
if (isp1020_init(host))
goto fail_and_unregister;
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -113,6 +113,7 @@ const char *const scsi_device_types[MAX_
"Unknown ",
"RAID ",
"Enclosure ",
+ "Direct-Access-RBC",
};
EXPORT_SYMBOL(scsi_device_types);
@@ -259,8 +260,6 @@ struct scsi_cmnd *scsi_get_command(struc
memset(cmd, 0, sizeof(*cmd));
cmd->device = dev;
- cmd->state = SCSI_STATE_UNUSED;
- cmd->owner = SCSI_OWNER_NOBODY;
init_timer(&cmd->eh_timeout);
INIT_LIST_HEAD(&cmd->list);
spin_lock_irqsave(&dev->list_lock, flags);
@@ -610,10 +609,6 @@ int scsi_dispatch_cmd(struct scsi_cmnd *
* We will use a queued command if possible, otherwise we will
* emulate the queuing and calling of completion function ourselves.
*/
-
- cmd->state = SCSI_STATE_QUEUED;
- cmd->owner = SCSI_OWNER_LOWLEVEL;
-
atomic_inc(&cmd->device->iorequest_cnt);
/*
@@ -683,7 +678,6 @@ void scsi_init_cmd_from_req(struct scsi_
{
sreq->sr_command = cmd;
- cmd->owner = SCSI_OWNER_MIDLEVEL;
cmd->cmd_len = sreq->sr_cmd_len;
cmd->use_sg = sreq->sr_use_sg;
@@ -719,7 +713,6 @@ void scsi_init_cmd_from_req(struct scsi_
/*
* Start the timer ticking.
*/
- cmd->abort_reason = 0;
cmd->result = 0;
SCSI_LOG_MLQUEUE(3, printk("Leaving scsi_init_cmd_from_req()\n"));
@@ -768,8 +761,6 @@ void __scsi_done(struct scsi_cmnd *cmd)
* Set the serial numbers back to zero
*/
cmd->serial_number = 0;
- cmd->state = SCSI_STATE_BHQUEUE;
- cmd->owner = SCSI_OWNER_BH_HANDLER;
atomic_inc(&cmd->device->iodone_cnt);
if (cmd->result)
@@ -890,9 +881,6 @@ void scsi_finish_command(struct scsi_cmn
SCSI_LOG_MLCOMPLETE(4, printk("Notifying upper driver of completion "
"for device %d %x\n", sdev->id, cmd->result));
- cmd->owner = SCSI_OWNER_HIGHLEVEL;
- cmd->state = SCSI_STATE_FINISHED;
-
/*
* We can get here with use_sg=0, causing a panic in the upper level
*/
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -73,12 +73,7 @@ int scsi_eh_scmd_add(struct scsi_cmnd *s
spin_lock_irqsave(shost->host_lock, flags);
- scsi_eh_eflags_set(scmd, eh_flag);
- /*
- * FIXME: Can we stop setting owner and state.
- */
- scmd->owner = SCSI_OWNER_ERROR_HANDLER;
- scmd->state = SCSI_STATE_FAILED;
+ scmd->eh_eflags |= eh_flag;
list_add_tail(&scmd->eh_entry, &shost->eh_cmd_q);
set_bit(SHOST_RECOVERY, &shost->shost_state);
shost->host_failed++;
@@ -233,8 +228,7 @@ static inline void scsi_eh_prt_fail_stat
list_for_each_entry(scmd, work_q, eh_entry) {
if (scmd->device == sdev) {
++total_failures;
- if (scsi_eh_eflags_chk(scmd,
- SCSI_EH_CANCEL_CMD))
+ if (scmd->eh_eflags & SCSI_EH_CANCEL_CMD)
++cmd_cancel;
else
++cmd_failed;
@@ -430,7 +424,7 @@ static int scsi_eh_completed_normally(st
**/
static void scsi_eh_times_out(struct scsi_cmnd *scmd)
{
- scsi_eh_eflags_set(scmd, SCSI_EH_REC_TIMEOUT);
+ scmd->eh_eflags |= SCSI_EH_REC_TIMEOUT;
SCSI_LOG_ERROR_RECOVERY(3, printk("%s: scmd:%p\n", __FUNCTION__,
scmd));
@@ -451,7 +445,6 @@ static void scsi_eh_done(struct scsi_cmn
*/
if (del_timer(&scmd->eh_timeout)) {
scmd->request->rq_status = RQ_SCSI_DONE;
- scmd->owner = SCSI_OWNER_ERROR_HANDLER;
SCSI_LOG_ERROR_RECOVERY(3, printk("%s scmd: %p result: %x\n",
__FUNCTION__, scmd, scmd->result));
@@ -484,8 +477,6 @@ static int scsi_send_eh_cmnd(struct scsi
* we will use a queued command if possible, otherwise we will
* emulate the queuing and calling of completion function ourselves.
*/
- scmd->owner = SCSI_OWNER_LOWLEVEL;
-
if (sdev->scsi_level <= SCSI_2)
scmd->cmnd[1] = (scmd->cmnd[1] & 0x1f) |
(sdev->lun << 5 & 0xe0);
@@ -512,9 +503,8 @@ static int scsi_send_eh_cmnd(struct scsi
* see if timeout. if so, tell the host to forget about it.
* in other words, we don't want a callback any more.
*/
- if (scsi_eh_eflags_chk(scmd, SCSI_EH_REC_TIMEOUT)) {
- scsi_eh_eflags_clr(scmd, SCSI_EH_REC_TIMEOUT);
- scmd->owner = SCSI_OWNER_LOWLEVEL;
+ if (scmd->eh_eflags & SCSI_EH_REC_TIMEOUT) {
+ scmd->eh_eflags &= ~SCSI_EH_REC_TIMEOUT;
/*
* as far as the low level driver is
@@ -530,8 +520,6 @@ static int scsi_send_eh_cmnd(struct scsi
shost->hostt->eh_abort_handler(scmd);
scmd->request->rq_status = RQ_SCSI_DONE;
- scmd->owner = SCSI_OWNER_ERROR_HANDLER;
-
rtn = FAILED;
}
@@ -641,9 +629,7 @@ static void scsi_eh_finish_cmd(struct sc
struct list_head *done_q)
{
scmd->device->host->host_failed--;
- scmd->state = SCSI_STATE_BHQUEUE;
-
- scsi_eh_eflags_clr_all(scmd);
+ scmd->eh_eflags = 0;
/*
* set this back so that the upper level can correctly free up
@@ -676,13 +662,11 @@ static void scsi_eh_finish_cmd(struct sc
static int scsi_eh_get_sense(struct list_head *work_q,
struct list_head *done_q)
{
- struct list_head *lh, *lh_sf;
- struct scsi_cmnd *scmd;
+ struct scsi_cmnd *scmd, *next;
int rtn;
- list_for_each_safe(lh, lh_sf, work_q) {
- scmd = list_entry(lh, struct scsi_cmnd, eh_entry);
- if (scsi_eh_eflags_chk(scmd, SCSI_EH_CANCEL_CMD) ||
+ list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
+ if ((scmd->eh_eflags & SCSI_EH_CANCEL_CMD) ||
SCSI_SENSE_VALID(scmd))
continue;
@@ -742,9 +726,6 @@ static int scsi_try_to_abort_cmd(struct
*/
if (scmd->serial_number == 0)
return SUCCESS;
-
- scmd->owner = SCSI_OWNER_LOWLEVEL;
-
return scmd->device->host->hostt->eh_abort_handler(scmd);
}
@@ -815,20 +796,18 @@ retry_tur:
static int scsi_eh_abort_cmds(struct list_head *work_q,
struct list_head *done_q)
{
- struct list_head *lh, *lh_sf;
- struct scsi_cmnd *scmd;
+ struct scsi_cmnd *scmd, *next;
int rtn;
- list_for_each_safe(lh, lh_sf, work_q) {
- scmd = list_entry(lh, struct scsi_cmnd, eh_entry);
- if (!scsi_eh_eflags_chk(scmd, SCSI_EH_CANCEL_CMD))
+ list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
+ if (!(scmd->eh_eflags & SCSI_EH_CANCEL_CMD))
continue;
SCSI_LOG_ERROR_RECOVERY(3, printk("%s: aborting cmd:"
"0x%p\n", current->comm,
scmd));
rtn = scsi_try_to_abort_cmd(scmd);
if (rtn == SUCCESS) {
- scsi_eh_eflags_clr(scmd, SCSI_EH_CANCEL_CMD);
+ scmd->eh_eflags &= ~SCSI_EH_CANCEL_CMD;
if (!scsi_device_online(scmd->device) ||
!scsi_eh_tur(scmd)) {
scsi_eh_finish_cmd(scmd, done_q);
@@ -862,10 +841,7 @@ static int scsi_try_bus_device_reset(str
if (!scmd->device->host->hostt->eh_device_reset_handler)
return FAILED;
- scmd->owner = SCSI_OWNER_LOWLEVEL;
-
rtn = scmd->device->host->hostt->eh_device_reset_handler(scmd);
-
if (rtn == SUCCESS) {
scmd->device->was_reset = 1;
scmd->device->expecting_cc_ua = 1;
@@ -938,8 +914,7 @@ static int scsi_eh_stu(struct Scsi_Host
struct list_head *work_q,
struct list_head *done_q)
{
- struct list_head *lh, *lh_sf;
- struct scsi_cmnd *scmd, *stu_scmd;
+ struct scsi_cmnd *scmd, *stu_scmd, *next;
struct scsi_device *sdev;
shost_for_each_device(sdev, shost) {
@@ -960,8 +935,8 @@ static int scsi_eh_stu(struct Scsi_Host
if (!scsi_eh_try_stu(stu_scmd)) {
if (!scsi_device_online(sdev) ||
!scsi_eh_tur(stu_scmd)) {
- list_for_each_safe(lh, lh_sf, work_q) {
- scmd = list_entry(lh, struct scsi_cmnd, eh_entry);
+ list_for_each_entry_safe(scmd, next,
+ work_q, eh_entry) {
if (scmd->device == sdev)
scsi_eh_finish_cmd(scmd, done_q);
}
@@ -992,8 +967,7 @@ static int scsi_eh_bus_device_reset(stru
struct list_head *work_q,
struct list_head *done_q)
{
- struct list_head *lh, *lh_sf;
- struct scsi_cmnd *scmd, *bdr_scmd;
+ struct scsi_cmnd *scmd, *bdr_scmd, *next;
struct scsi_device *sdev;
int rtn;
@@ -1015,11 +989,8 @@ static int scsi_eh_bus_device_reset(stru
if (rtn == SUCCESS) {
if (!scsi_device_online(sdev) ||
!scsi_eh_tur(bdr_scmd)) {
- list_for_each_safe(lh, lh_sf,
- work_q) {
- scmd = list_entry(lh, struct
- scsi_cmnd,
- eh_entry);
+ list_for_each_entry_safe(scmd, next,
+ work_q, eh_entry) {
if (scmd->device == sdev)
scsi_eh_finish_cmd(scmd,
done_q);
@@ -1048,7 +1019,6 @@ static int scsi_try_bus_reset(struct scs
SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Bus RST\n",
__FUNCTION__));
- scmd->owner = SCSI_OWNER_LOWLEVEL;
if (!scmd->device->host->hostt->eh_bus_reset_handler)
return FAILED;
@@ -1077,7 +1047,6 @@ static int scsi_try_host_reset(struct sc
SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Host RST\n",
__FUNCTION__));
- scmd->owner = SCSI_OWNER_LOWLEVEL;
if (!scmd->device->host->hostt->eh_host_reset_handler)
return FAILED;
@@ -1104,9 +1073,7 @@ static int scsi_eh_bus_reset(struct Scsi
struct list_head *work_q,
struct list_head *done_q)
{
- struct list_head *lh, *lh_sf;
- struct scsi_cmnd *scmd;
- struct scsi_cmnd *chan_scmd;
+ struct scsi_cmnd *scmd, *chan_scmd, *next;
unsigned int channel;
int rtn;
@@ -1137,9 +1104,7 @@ static int scsi_eh_bus_reset(struct Scsi
channel));
rtn = scsi_try_bus_reset(chan_scmd);
if (rtn == SUCCESS) {
- list_for_each_safe(lh, lh_sf, work_q) {
- scmd = list_entry(lh, struct scsi_cmnd,
- eh_entry);
+ list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
if (channel == scmd->device->channel)
if (!scsi_device_online(scmd->device) ||
!scsi_eh_tur(scmd))
@@ -1164,9 +1129,8 @@ static int scsi_eh_bus_reset(struct Scsi
static int scsi_eh_host_reset(struct list_head *work_q,
struct list_head *done_q)
{
+ struct scsi_cmnd *scmd, *next;
int rtn;
- struct list_head *lh, *lh_sf;
- struct scsi_cmnd *scmd;
if (!list_empty(work_q)) {
scmd = list_entry(work_q->next,
@@ -1177,8 +1141,7 @@ static int scsi_eh_host_reset(struct lis
rtn = scsi_try_host_reset(scmd);
if (rtn == SUCCESS) {
- list_for_each_safe(lh, lh_sf, work_q) {
- scmd = list_entry(lh, struct scsi_cmnd, eh_entry);
+ list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
if (!scsi_device_online(scmd->device) ||
(!scsi_eh_try_stu(scmd) && !scsi_eh_tur(scmd)) ||
!scsi_eh_tur(scmd))
@@ -1202,11 +1165,9 @@ static int scsi_eh_host_reset(struct lis
static void scsi_eh_offline_sdevs(struct list_head *work_q,
struct list_head *done_q)
{
- struct list_head *lh, *lh_sf;
- struct scsi_cmnd *scmd;
+ struct scsi_cmnd *scmd, *next;
- list_for_each_safe(lh, lh_sf, work_q) {
- scmd = list_entry(lh, struct scsi_cmnd, eh_entry);
+ list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
printk(KERN_INFO "scsi: Device offlined - not"
" ready after error recovery: host"
" %d channel %d id %d lun %d\n",
@@ -1215,7 +1176,7 @@ static void scsi_eh_offline_sdevs(struct
scmd->device->id,
scmd->device->lun);
scsi_device_set_state(scmd->device, SDEV_OFFLINE);
- if (scsi_eh_eflags_chk(scmd, SCSI_EH_CANCEL_CMD)) {
+ if (scmd->eh_eflags & SCSI_EH_CANCEL_CMD) {
/*
* FIXME: Handle lost cmds.
*/
@@ -1534,12 +1495,10 @@ static void scsi_eh_ready_devs(struct Sc
**/
static void scsi_eh_flush_done_q(struct list_head *done_q)
{
- struct list_head *lh, *lh_sf;
- struct scsi_cmnd *scmd;
+ struct scsi_cmnd *scmd, *next;
- list_for_each_safe(lh, lh_sf, done_q) {
- scmd = list_entry(lh, struct scsi_cmnd, eh_entry);
- list_del_init(lh);
+ list_for_each_entry_safe(scmd, next, done_q, eh_entry) {
+ list_del_init(&scmd->eh_entry);
if (scsi_device_online(scmd->device) &&
!blk_noretry_request(scmd->request) &&
(++scmd->retries < scmd->allowed)) {
@@ -1818,9 +1777,7 @@ scsi_reset_provider(struct scsi_device *
scmd->request = &req;
memset(&scmd->eh_timeout, 0, sizeof(scmd->eh_timeout));
scmd->request->rq_status = RQ_SCSI_BUSY;
- scmd->state = SCSI_STATE_INITIALIZING;
- scmd->owner = SCSI_OWNER_MIDLEVEL;
-
+
memset(&scmd->cmnd, '\0', sizeof(scmd->cmnd));
scmd->scsi_done = scsi_reset_provider_done_command;
@@ -1829,7 +1786,6 @@ scsi_reset_provider(struct scsi_device *
scmd->bufflen = 0;
scmd->request_buffer = NULL;
scmd->request_bufflen = 0;
- scmd->abort_reason = DID_ABORT;
scmd->cmd_len = 0;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -146,12 +146,6 @@ int scsi_queue_insert(struct scsi_cmnd *
device->device_blocked = device->max_device_blocked;
/*
- * Register the fact that we own the thing for now.
- */
- cmd->state = SCSI_STATE_MLQUEUE;
- cmd->owner = SCSI_OWNER_MIDLEVEL;
-
- /*
* Decrement the counters, since these commands are no longer
* active on the host/device.
*/
@@ -299,9 +293,7 @@ EXPORT_SYMBOL(scsi_wait_req);
*/
static int scsi_init_cmd_errh(struct scsi_cmnd *cmd)
{
- cmd->owner = SCSI_OWNER_MIDLEVEL;
cmd->serial_number = 0;
- cmd->abort_reason = 0;
memset(cmd->sense_buffer, 0, sizeof cmd->sense_buffer);
@@ -322,7 +314,6 @@ static int scsi_init_cmd_errh(struct scs
memcpy(cmd->data_cmnd, cmd->cmnd, sizeof(cmd->cmnd));
cmd->buffer = cmd->request_buffer;
cmd->bufflen = cmd->request_bufflen;
- cmd->abort_reason = 0;
return 1;
}
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -13,17 +13,6 @@ struct Scsi_Host;
/*
- * These are the values that the owner field can take.
- * They are used as an indication of who the command belongs to.
- */
-#define SCSI_OWNER_HIGHLEVEL 0x100
-#define SCSI_OWNER_MIDLEVEL 0x101
-#define SCSI_OWNER_LOWLEVEL 0x102
-#define SCSI_OWNER_ERROR_HANDLER 0x103
-#define SCSI_OWNER_BH_HANDLER 0x104
-#define SCSI_OWNER_NOBODY 0x105
-
-/*
* Magic values for certain scsi structs. Shouldn't ever be used.
*/
#define SCSI_CMND_MAGIC 0xE25C23A5
@@ -32,15 +21,6 @@ struct Scsi_Host;
/*
* Scsi Error Handler Flags
*/
-#define scsi_eh_eflags_chk(scp, flags) \
- ((scp)->eh_eflags & (flags))
-#define scsi_eh_eflags_set(scp, flags) \
- do { (scp)->eh_eflags |= (flags); } while(0)
-#define scsi_eh_eflags_clr(scp, flags) \
- do { (scp)->eh_eflags &= ~(flags); } while(0)
-#define scsi_eh_eflags_clr_all(scp) \
- (scp->eh_eflags = 0)
-
#define SCSI_EH_CANCEL_CMD 0x0001 /* Cancel this cmd */
#define SCSI_EH_REC_TIMEOUT 0x0002 /* EH retry timed out */
diff --git a/drivers/scsi/u14-34f.c b/drivers/scsi/u14-34f.c
--- a/drivers/scsi/u14-34f.c
+++ b/drivers/scsi/u14-34f.c
@@ -1372,15 +1372,6 @@ static int u14_34f_eh_abort(struct scsi_
if (inb(sh[j]->io_port + REG_SYS_INTR) & IRQ_ASSERTED)
printk("%s: abort, mbox %d, interrupt pending.\n", BN(j), i);
- if (SCarg->eh_state == SCSI_STATE_TIMEOUT) {
- unmap_dma(i, j);
- SCarg->host_scribble = NULL;
- HD(j)->cp_stat[i] = FREE;
- printk("%s, abort, mbox %d, eh_state timeout, pid %ld.\n",
- BN(j), i, SCarg->pid);
- return SUCCESS;
- }
-
return FAILED;
}
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -28,7 +28,7 @@ extern const unsigned char scsi_command_
* SCSI device types
*/
-#define MAX_SCSI_DEVICE_CODE 14
+#define MAX_SCSI_DEVICE_CODE 15
extern const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE];
/*
@@ -211,8 +211,8 @@ static inline int scsi_status_is_good(in
* - treated as TYPE_DISK */
#define TYPE_MEDIUM_CHANGER 0x08
#define TYPE_COMM 0x09 /* Communications device */
-#define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */
#define TYPE_RAID 0x0c
+#define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */
#define TYPE_RBC 0x0e
#define TYPE_NO_LUN 0x7f
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -31,14 +31,11 @@ struct scsi_cmnd {
int sc_magic;
struct scsi_device *device;
- unsigned short state;
- unsigned short owner;
struct scsi_request *sc_request;
struct list_head list; /* scsi_cmnd participates in queue lists */
struct list_head eh_entry; /* entry for the host eh_cmd_q */
- int eh_state; /* Used for state tracking in error handlr */
int eh_eflags; /* Used by error handlr */
void (*done) (struct scsi_cmnd *); /* Mid-level done function */
@@ -80,8 +77,6 @@ struct scsi_cmnd {
* sense info */
unsigned short use_sg; /* Number of pieces of scatter-gather */
unsigned short sglist_len; /* size of malloc'd scatter-gather list */
- unsigned short abort_reason; /* If the mid-level code requests an
- * abort, this is the reason. */
unsigned bufflen; /* Size of data buffer */
void *buffer; /* Data buffer */
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -641,12 +641,6 @@ static inline void scsi_assign_lock(stru
shost->host_lock = lock;
}
-static inline void scsi_set_device(struct Scsi_Host *shost,
- struct device *dev)
-{
- shost->shost_gendev.parent = dev;
-}
-
static inline struct device *scsi_get_device(struct Scsi_Host *shost)
{
return shost->shost_gendev.parent;