GIT 61d9cdf2a9ccb9e4770d7723db8b18b8952778ce master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
---
Signed-off-by: Andrew Morton <akpm@osdl.org>
---
Makefile | 127 ++++++++++----------------------------
arch/m68knommu/Makefile | 2
arch/mips/Makefile | 2
include/asm-generic/vmlinux.lds.h | 9 ++
init/Kconfig | 4 -
init/Makefile | 3
scripts/Kbuild.include | 96 ++++++++++++++++++++++++++++
scripts/Makefile.build | 7 +-
scripts/Makefile.clean | 14 ++--
scripts/Makefile.host | 3
scripts/Makefile.lib | 99 -----------------------------
scripts/Makefile.modinst | 2
scripts/Makefile.modpost | 1
scripts/conmakehash.c | 2
scripts/kallsyms.c | 6 -
scripts/kernel-doc | 8 ++
scripts/lxdialog/dialog.h | 2
scripts/lxdialog/inputbox.c | 4 -
scripts/mkcompile_h | 12 ++-
scripts/mod/modpost.c | 9 ++
scripts/mod/sumversion.c | 8 +-
scripts/package/Makefile | 24 +++++--
scripts/package/builddeb | 56 ++++++++++++++--
scripts/package/buildtar | 111 +++++++++++++++++++++++++++++++++
scripts/package/mkspec | 9 ++
scripts/reference_discarded.pl | 1
scripts/reference_init.pl | 1
usr/Makefile | 2
Lindent | 0
29 files changed, 389 insertions(+), 235 deletions(-)
diff -puN arch/m68knommu/Makefile~git-kbuild arch/m68knommu/Makefile
--- devel/arch/m68knommu/Makefile~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/arch/m68knommu/Makefile 2005-07-27 17:53:08.000000000 -0700
@@ -109,7 +109,7 @@ libs-y += arch/m68knommu/lib/
prepare: include/asm-$(ARCH)/asm-offsets.h
archclean:
- $(call descend arch/$(ARCH)/boot, subdirclean)
+ $(Q)$(MAKE) $(clean)=arch/m68knommu/boot
include/asm-$(ARCH)/asm-offsets.h: arch/$(ARCH)/kernel/asm-offsets.s \
include/asm include/linux/version.h \
diff -puN arch/mips/Makefile~git-kbuild arch/mips/Makefile
--- devel/arch/mips/Makefile~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/arch/mips/Makefile 2005-07-27 17:53:08.000000000 -0700
@@ -683,7 +683,7 @@ drivers-$(CONFIG_OPROFILE) += arch/mips/
ifdef CONFIG_LASAT
rom.bin rom.sw: vmlinux
- $(call descend,arch/mips/lasat/image,$@)
+ $(Q)$(MAKE) $(build)=arch/mips/lasat/image $@
endif
#
diff -puN include/asm-generic/vmlinux.lds.h~git-kbuild include/asm-generic/vmlinux.lds.h
--- devel/include/asm-generic/vmlinux.lds.h~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/include/asm-generic/vmlinux.lds.h 2005-07-27 17:53:08.000000000 -0700
@@ -6,6 +6,9 @@
#define VMLINUX_SYMBOL(_sym_) _sym_
#endif
+/* Align . to a 8 byte boundary equals to maximum function alignment. */
+#define ALIGN_FUNCTION() . = ALIGN(8)
+
#define RODATA \
.rodata : AT(ADDR(.rodata) - LOAD_OFFSET) { \
*(.rodata) *(.rodata.*) \
@@ -79,12 +82,18 @@
VMLINUX_SYMBOL(__security_initcall_end) = .; \
}
+/* sched.text is aling to function alignment to secure we have same
+ * address even at second ld pass when generating System.map */
#define SCHED_TEXT \
+ ALIGN_FUNCTION(); \
VMLINUX_SYMBOL(__sched_text_start) = .; \
*(.sched.text) \
VMLINUX_SYMBOL(__sched_text_end) = .;
+/* spinlock.text is aling to function alignment to secure we have same
+ * address even at second ld pass when generating System.map */
#define LOCK_TEXT \
+ ALIGN_FUNCTION(); \
VMLINUX_SYMBOL(__lock_text_start) = .; \
*(.spinlock.text) \
VMLINUX_SYMBOL(__lock_text_end) = .;
diff -puN init/Kconfig~git-kbuild init/Kconfig
--- devel/init/Kconfig~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/init/Kconfig 2005-07-27 17:53:08.000000000 -0700
@@ -260,8 +260,8 @@ config KALLSYMS_ALL
help
Normally kallsyms only contains the symbols of functions, for nicer
OOPS messages. Some debuggers can use kallsyms for other
- symbols too: say Y here to include all symbols, and you
- don't care about adding 300k to the size of your kernel.
+ symbols too: say Y here to include all symbols, if you need them
+ and you don't care about adding 300k to the size of your kernel.
Say N.
diff -puN init/Makefile~git-kbuild init/Makefile
--- devel/init/Makefile~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/init/Makefile 2005-07-27 17:53:08.000000000 -0700
@@ -25,4 +25,5 @@ $(obj)/version.o: include/linux/compile.
include/linux/compile.h: FORCE
@echo ' CHK $@'
- @$(CONFIG_SHELL) $(srctree)/scripts/mkcompile_h $@ "$(UTS_MACHINE)" "$(CONFIG_SMP)" "$(CC) $(CFLAGS)"
+ $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkcompile_h $@ \
+ "$(UTS_MACHINE)" "$(CONFIG_SMP)" "$(CONFIG_PREEMPT)" "$(CC) $(CFLAGS)"
diff -puN Makefile~git-kbuild Makefile
--- devel/Makefile~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/Makefile 2005-07-27 17:53:08.000000000 -0700
@@ -109,10 +109,9 @@ $(if $(KBUILD_OUTPUT),, \
.PHONY: $(MAKECMDGOALS)
$(filter-out _all,$(MAKECMDGOALS)) _all:
- $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
- KBUILD_SRC=$(CURDIR) KBUILD_VERBOSE=$(KBUILD_VERBOSE) \
- KBUILD_CHECK=$(KBUILD_CHECK) KBUILD_EXTMOD="$(KBUILD_EXTMOD)" \
- -f $(CURDIR)/Makefile $@
+ $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
+ KBUILD_SRC=$(CURDIR) \
+ KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $@
# Leave processing to above invocation of make
skip-makefile := 1
@@ -233,7 +232,7 @@ ifeq ($(MAKECMDGOALS),)
KBUILD_MODULES := 1
endif
-export KBUILD_MODULES KBUILD_BUILTIN KBUILD_VERBOSE
+export KBUILD_MODULES KBUILD_BUILTIN
export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
# Beautify output
@@ -309,6 +308,9 @@ cc-version = $(shell $(CONFIG_SHELL) $(s
# Look for make include files relative to root of kernel src
MAKEFLAGS += --include-dir=$(srctree)
+# We need some generic definitions
+include $(srctree)/scripts/Kbuild.include
+
# For maximum performance (+ possibly random breakage, uncomment
# the following)
@@ -348,7 +350,7 @@ LINUXINCLUDE := -Iinclude \
CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE)
-CFLAGS := -Wall -Wstrict-prototypes -Wno-trigraphs \
+CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -fno-common \
-ffreestanding
AFLAGS := -D__ASSEMBLY__
@@ -367,11 +369,6 @@ export AFLAGS AFLAGS_KERNEL AFLAGS_MODUL
# even be read-only.
export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
-# The temporary file to save gcc -MD generated dependencies must not
-# contain a comma
-comma := ,
-depfile = $(subst $(comma),_,$(@D)/.$(@F).d)
-
# Files to ignore in find ... statements
RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc \) -prune -o
@@ -691,8 +688,10 @@ endef
# Update vmlinux version before link
# Use + in front of this rule to silent warning about make -j1
+# First command is ':' to allow us to use + in front of this rule
cmd_ksym_ld = $(cmd_vmlinux__)
define rule_ksym_ld
+ :
+$(call cmd,vmlinux_version)
$(call cmd,vmlinux__)
$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
@@ -722,6 +721,16 @@ quiet_cmd_kallsyms = KSYM $@
# Needs to visit scripts/ before $(KALLSYMS) can be used.
$(KALLSYMS): scripts ;
+# Generate some data for debugging strange kallsyms problems
+debug_kallsyms: .tmp_map$(last_kallsyms)
+
+.tmp_map%: .tmp_vmlinux% FORCE
+ ($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@
+
+.tmp_map3: .tmp_map2
+
+.tmp_map2: .tmp_map1
+
endif # ifdef CONFIG_KALLSYMS
# vmlinux image - including updated kernel symbols
@@ -757,7 +766,7 @@ $(vmlinux-dirs): prepare-all scripts
prepare2:
ifneq ($(KBUILD_SRC),)
@echo ' Using $(srctree) as source for kernel'
- $(Q)if [ -h $(srctree)/include/asm -o -f $(srctree)/.config ]; then \
+ $(Q)if [ -f $(srctree)/.config ]; then \
echo " $(srctree) is not clean, please run 'make mrproper'";\
echo " in the '$(srctree)' directory.";\
/bin/false; \
@@ -769,7 +778,8 @@ endif
# prepare1 creates a makefile if using a separate output directory
prepare1: prepare2 outputmakefile
-prepare0: prepare1 include/linux/version.h include/asm include/config/MARKER
+prepare0: prepare1 include/linux/version.h include/asm \
+ include/config/MARKER
ifneq ($(KBUILD_MODULES),)
$(Q)rm -rf $(MODVERDIR)
$(Q)mkdir -p $(MODVERDIR)
@@ -875,7 +885,7 @@ modules_install: _modinst_ _modinst_post
.PHONY: _modinst_
_modinst_:
- @if [ -z "`$(DEPMOD) -V | grep module-init-tools`" ]; then \
+ @if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
echo "Warning: you may need to install module-init-tools"; \
echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
sleep 1; \
@@ -1159,28 +1169,34 @@ else
__srctree = $(srctree)/
endif
+ALLSOURCE_ARCHS := $(ARCH)
+
define all-sources
( find $(__srctree) $(RCS_FIND_IGNORE) \
\( -name include -o -name arch \) -prune -o \
-name '*.[chS]' -print; \
- find $(__srctree)arch/$(ARCH) $(RCS_FIND_IGNORE) \
- -name '*.[chS]' -print; \
+ for ARCH in $(ALLSOURCE_ARCHS) ; do \
+ find $(__srctree)arch/$${ARCH} $(RCS_FIND_IGNORE) \
+ -name '*.[chS]' -print; \
+ done ; \
find $(__srctree)security/selinux/include $(RCS_FIND_IGNORE) \
-name '*.[chS]' -print; \
find $(__srctree)include $(RCS_FIND_IGNORE) \
\( -name config -o -name 'asm-*' \) -prune \
-o -name '*.[chS]' -print; \
- find $(__srctree)include/asm-$(ARCH) $(RCS_FIND_IGNORE) \
- -name '*.[chS]' -print; \
+ for ARCH in $(ALLSOURCE_ARCHS) ; do \
+ find $(__srctree)include/asm-$${ARCH} $(RCS_FIND_IGNORE) \
+ -name '*.[chS]' -print; \
+ done ; \
find $(__srctree)include/asm-generic $(RCS_FIND_IGNORE) \
-name '*.[chS]' -print )
endef
quiet_cmd_cscope-file = FILELST cscope.files
- cmd_cscope-file = $(all-sources) > cscope.files
+ cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files
quiet_cmd_cscope = MAKE cscope.out
- cmd_cscope = cscope -k -b -q
+ cmd_cscope = cscope -b
cscope: FORCE
$(call cmd,cscope-file)
@@ -1268,82 +1284,11 @@ ifneq ($(cmd_files),)
include $(cmd_files)
endif
-# Execute command and generate cmd file
-if_changed = $(if $(strip $? \
- $(filter-out $(cmd_$(1)),$(cmd_$@))\
- $(filter-out $(cmd_$@),$(cmd_$(1)))),\
- @set -e; \
- $(if $($(quiet)cmd_$(1)),echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';) \
- $(cmd_$(1)); \
- echo 'cmd_$@ := $(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).cmd)
-
-
-# execute the command and also postprocess generated .d dependencies
-# file
-if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
- $(filter-out $(cmd_$(1)),$(cmd_$@))\
- $(filter-out $(cmd_$@),$(cmd_$(1)))),\
- $(Q)set -e; \
- $(if $($(quiet)cmd_$(1)),echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';) \
- $(cmd_$(1)); \
- scripts/basic/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \
- rm -f $(depfile); \
- mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd)
-
-# Usage: $(call if_changed_rule,foo)
-# will check if $(cmd_foo) changed, or any of the prequisites changed,
-# and if so will execute $(rule_foo)
-
-if_changed_rule = $(if $(strip $? \
- $(filter-out $(cmd_$(1)),$(cmd_$(@F)))\
- $(filter-out $(cmd_$(@F)),$(cmd_$(1)))),\
- $(Q)$(rule_$(1)))
-
-# If quiet is set, only print short version of command
-
-cmd = @$(if $($(quiet)cmd_$(1)),echo ' $($(quiet)cmd_$(1))' &&) $(cmd_$(1))
-
-# filechk is used to check if the content of a generated file is updated.
-# Sample usage:
-# define filechk_sample
-# echo $KERNELRELEASE
-# endef
-# version.h : Makefile
-# $(call filechk,sample)
-# The rule defined shall write to stdout the content of the new file.
-# The existing file will be compared with the new one.
-# - If no file exist it is created
-# - If the content differ the new file is used
-# - If they are equal no change, and no timestamp update
-
-define filechk
- @set -e; \
- echo ' CHK $@'; \
- mkdir -p $(dir $@); \
- $(filechk_$(1)) < $< > $@.tmp; \
- if [ -r $@ ] && cmp -s $@ $@.tmp; then \
- rm -f $@.tmp; \
- else \
- echo ' UPD $@'; \
- mv -f $@.tmp $@; \
- fi
-endef
-
-# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=dir
-# Usage:
-# $(Q)$(MAKE) $(build)=dir
-build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
-
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
# Usage:
# $(Q)$(MAKE) $(clean)=dir
clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
-# $(call descend,<dir>,<target>)
-# Recursively call a sub-make in <dir> with target <target>
-# Usage is deprecated, because make does not see this as an invocation of make.
-descend =$(Q)$(MAKE) -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj=$(1) $(2)
-
endif # skip-makefile
FORCE:
diff -puN scripts/conmakehash.c~git-kbuild scripts/conmakehash.c
--- devel/scripts/conmakehash.c~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/scripts/conmakehash.c 2005-07-27 17:53:09.000000000 -0700
@@ -33,7 +33,7 @@ void usage(char *argv0)
int getunicode(char **p0)
{
- unsigned char *p = *p0;
+ char *p = *p0;
while (*p == ' ' || *p == '\t')
p++;
diff -puN scripts/kallsyms.c~git-kbuild scripts/kallsyms.c
--- devel/scripts/kallsyms.c~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/scripts/kallsyms.c 2005-07-27 17:53:09.000000000 -0700
@@ -207,9 +207,9 @@ symbol_valid(struct sym_entry *s)
* move then they may get dropped in pass 2, which breaks the
* kallsyms rules.
*/
- if ((s->addr == _etext && strcmp(s->sym + offset, "_etext")) ||
- (s->addr == _einittext && strcmp(s->sym + offset, "_einittext")) ||
- (s->addr == _eextratext && strcmp(s->sym + offset, "_eextratext")))
+ if ((s->addr == _etext && strcmp((char*)s->sym + offset, "_etext")) ||
+ (s->addr == _einittext && strcmp((char*)s->sym + offset, "_einittext")) ||
+ (s->addr == _eextratext && strcmp((char*)s->sym + offset, "_eextratext")))
return 0;
}
diff -puN /dev/null scripts/Kbuild.include
--- /dev/null 2003-09-15 06:40:47.000000000 -0700
+++ devel-akpm/scripts/Kbuild.include 2005-07-27 17:53:08.000000000 -0700
@@ -0,0 +1,96 @@
+####
+# kbuild: Generic definitions
+
+# Convinient variables
+comma := ,
+empty :=
+space := $(empty) $(empty)
+
+###
+# The temporary file to save gcc -MD generated dependencies must not
+# contain a comma
+depfile = $(subst $(comma),_,$(@D)/.$(@F).d)
+
+###
+# filechk is used to check if the content of a generated file is updated.
+# Sample usage:
+# define filechk_sample
+# echo $KERNELRELEASE
+# endef
+# version.h : Makefile
+# $(call filechk,sample)
+# The rule defined shall write to stdout the content of the new file.
+# The existing file will be compared with the new one.
+# - If no file exist it is created
+# - If the content differ the new file is used
+# - If they are equal no change, and no timestamp update
+# - stdin is piped in from the first prerequisite ($<) so one has
+# to specify a valid file as first prerequisite (often the kbuild file)
+define filechk
+ $(Q)set -e; \
+ echo ' CHK $@'; \
+ mkdir -p $(dir $@); \
+ $(filechk_$(1)) < $< > $@.tmp; \
+ if [ -r $@ ] && cmp -s $@ $@.tmp; then \
+ rm -f $@.tmp; \
+ else \
+ echo ' UPD $@'; \
+ mv -f $@.tmp $@; \
+ fi
+endef
+
+###
+# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
+# Usage:
+# $(Q)$(MAKE) $(build)=dir
+build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
+
+# If quiet is set, only print short version of command
+cmd = @$(if $($(quiet)cmd_$(1)),\
+ echo ' $(subst ','\'',$($(quiet)cmd_$(1)))' &&) $(cmd_$(1))
+
+###
+# if_changed - execute command if any prerequisite is newer than
+# target, or command line has changed
+# if_changed_dep - as if_changed, but uses fixdep to reveal dependencies
+# including used config symbols
+# if_changed_rule - as if_changed but execute rule instead
+# See Documentation/kbuild/makefiles.txt for more info
+
+ifneq ($(KBUILD_NOCMDDEP),1)
+# Check if both arguments has same arguments. Result in empty string if equal
+# User may override this check using make KBUILD_NOCMDDEP=1
+arg-check = $(strip $(filter-out $(1), $(2)) $(filter-out $(2), $(1)) )
+endif
+
+# echo command. Short version is $(quiet) equals quiet, otherwise full command
+echo-cmd = $(if $($(quiet)cmd_$(1)), \
+ echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';)
+
+# function to only execute the passed command if necessary
+# >'< substitution is for echo to work, >$< substitution to preserve $ when reloading .cmd file
+# note: when using inline perl scripts [perl -e '...$$t=1;...'] in $(cmd_xxx) double $$ your perl vars
+#
+if_changed = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
+ @set -e; \
+ $(echo-cmd) \
+ $(cmd_$(1)); \
+ echo 'cmd_$@ := $(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).cmd)
+
+# execute the command and also postprocess generated .d dependencies
+# file
+if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
+ $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
+ @set -e; \
+ $(echo-cmd) \
+ $(cmd_$(1)); \
+ scripts/basic/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \
+ rm -f $(depfile); \
+ mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd)
+
+# Usage: $(call if_changed_rule,foo)
+# will check if $(cmd_foo) changed, or any of the prequisites changed,
+# and if so will execute $(rule_foo)
+if_changed_rule = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),\
+ @set -e; \
+ $(rule_$(1)))
diff -puN scripts/kernel-doc~git-kbuild scripts/kernel-doc
--- devel/scripts/kernel-doc~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/scripts/kernel-doc 2005-07-27 17:53:09.000000000 -0700
@@ -1665,11 +1665,17 @@ sub xml_escape($) {
}
sub process_file($) {
- my ($file) = "$ENV{'SRCTREE'}@_";
+ my $file;
my $identifier;
my $func;
my $initial_section_counter = $section_counter;
+ if (defined($ENV{'SRCTREE'})) {
+ $file = "$ENV{'SRCTREE'}" . "/" . "@_";
+ }
+ else {
+ $file = "@_";
+ }
if (defined($source_map{$file})) {
$file = $source_map{$file};
}
diff -puN scripts/Lindent~git-kbuild scripts/Lindent
diff -puN scripts/lxdialog/dialog.h~git-kbuild scripts/lxdialog/dialog.h
--- devel/scripts/lxdialog/dialog.h~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/scripts/lxdialog/dialog.h 2005-07-27 17:53:09.000000000 -0700
@@ -163,7 +163,7 @@ int dialog_menu (const char *title, cons
int dialog_checklist (const char *title, const char *prompt, int height,
int width, int list_height, int item_no,
const char * const * items, int flag);
-extern unsigned char dialog_input_result[];
+extern char dialog_input_result[];
int dialog_inputbox (const char *title, const char *prompt, int height,
int width, const char *init);
diff -puN scripts/lxdialog/inputbox.c~git-kbuild scripts/lxdialog/inputbox.c
--- devel/scripts/lxdialog/inputbox.c~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/scripts/lxdialog/inputbox.c 2005-07-27 17:53:09.000000000 -0700
@@ -21,7 +21,7 @@
#include "dialog.h"
-unsigned char dialog_input_result[MAX_LEN + 1];
+char dialog_input_result[MAX_LEN + 1];
/*
* Print the termination buttons
@@ -48,7 +48,7 @@ dialog_inputbox (const char *title, cons
{
int i, x, y, box_y, box_x, box_width;
int input_x = 0, scroll = 0, key = 0, button = -1;
- unsigned char *instr = dialog_input_result;
+ char *instr = dialog_input_result;
WINDOW *dialog;
/* center dialog box on screen */
diff -puN scripts/Makefile.build~git-kbuild scripts/Makefile.build
--- devel/scripts/Makefile.build~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/scripts/Makefile.build 2005-07-27 17:53:09.000000000 -0700
@@ -10,8 +10,11 @@ __build:
# Read .config if it exist, otherwise ignore
-include .config
-include $(if $(wildcard $(obj)/Kbuild), $(obj)/Kbuild, $(obj)/Makefile)
+# The filename Kbuild has precedence over Makefile
+kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
+include $(if $(wildcard $(kbuild-dir)/Kbuild), $(kbuild-dir)/Kbuild, $(kbuild-dir)/Makefile)
+include scripts/Kbuild.include
include scripts/Makefile.lib
ifdef host-progs
@@ -169,7 +172,7 @@ cmd_modversions = \
-T $(@D)/.tmp_$(@F:.o=.ver); \
rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \
else \
- mv $(@D)/.tmp_$(@F) $@; \
+ mv -f $(@D)/.tmp_$(@F) $@; \
fi;
endif
diff -puN scripts/Makefile.clean~git-kbuild scripts/Makefile.clean
--- devel/scripts/Makefile.clean~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/scripts/Makefile.clean 2005-07-27 17:53:09.000000000 -0700
@@ -7,7 +7,14 @@ src := $(obj)
.PHONY: __clean
__clean:
-include $(if $(wildcard $(obj)/Kbuild), $(obj)/Kbuild, $(obj)/Makefile)
+# Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir
+# Usage:
+# $(Q)$(MAKE) $(clean)=dir
+clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
+
+# The filename Kbuild has precedence over Makefile
+kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
+include $(if $(wildcard $(kbuild-dir)/Kbuild), $(kbuild-dir)/Kbuild, $(kbuild-dir)/Makefile)
# Figure out what we need to build from the various variables
# ==========================================================================
@@ -87,8 +94,3 @@ $(subdir-ymn):
# If quiet is set, only print short version of command
cmd = @$(if $($(quiet)cmd_$(1)),echo ' $($(quiet)cmd_$(1))' &&) $(cmd_$(1))
-
-# Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir
-# Usage:
-# $(Q)$(MAKE) $(clean)=dir
-clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
diff -puN scripts/Makefile.host~git-kbuild scripts/Makefile.host
--- devel/scripts/Makefile.host~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/scripts/Makefile.host 2005-07-27 17:53:09.000000000 -0700
@@ -98,7 +98,8 @@ hostcxx_flags = -Wp,-MD,$(depfile) $(__
# Create executable from a single .c file
# host-csingle -> Executable
quiet_cmd_host-csingle = HOSTCC $@
- cmd_host-csingle = $(HOSTCC) $(hostc_flags) $(HOST_LOADLIBES) -o $@ $<
+ cmd_host-csingle = $(HOSTCC) $(hostc_flags) -o $@ $< \
+ $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
$(host-csingle): %: %.c FORCE
$(call if_changed_dep,host-csingle)
diff -puN scripts/Makefile.lib~git-kbuild scripts/Makefile.lib
--- devel/scripts/Makefile.lib~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/scripts/Makefile.lib 2005-07-27 17:53:09.000000000 -0700
@@ -1,13 +1,3 @@
-# ===========================================================================
-# kbuild: Generic definitions
-# ===========================================================================
-
-# Standard vars
-
-comma := ,
-empty :=
-space := $(empty) $(empty)
-
# Backward compatibility - to be removed...
extra-y += $(EXTRA_TARGETS)
# Figure out what we need to build from the various variables
@@ -84,10 +74,6 @@ multi-objs-m := $(addprefix $(obj)/,$(mu
subdir-ym := $(addprefix $(obj)/,$(subdir-ym))
obj-dirs := $(addprefix $(obj)/,$(obj-dirs))
-# The temporary file to save gcc -MD generated dependencies must not
-# contain a comma
-depfile = $(subst $(comma),_,$(@D)/.$(@F).d)
-
# These flags are needed for modversions and compiling, so we define them here
# already
# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will
@@ -179,89 +165,4 @@ cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS)
quiet_cmd_gzip = GZIP $@
cmd_gzip = gzip -f -9 < $< > $@
-# ===========================================================================
-# Generic stuff
-# ===========================================================================
-
-ifneq ($(KBUILD_NOCMDDEP),1)
-# Check if both arguments has same arguments. Result in empty string if equal
-# User may override this check using make KBUILD_NOCMDDEP=1
-arg-check = $(strip $(filter-out $(1), $(2)) $(filter-out $(2), $(1)) )
-
-endif
-
-# echo command. Short version is $(quiet) equals quiet, otherwise full command
-echo-cmd = $(if $($(quiet)cmd_$(1)), \
- echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';)
-
-# function to only execute the passed command if necessary
-# >'< substitution is for echo to work, >$< substitution to preserve $ when reloading .cmd file
-# note: when using inline perl scripts [perl -e '...$$t=1;...'] in $(cmd_xxx) double $$ your perl vars
-#
-if_changed = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
- @set -e; \
- $(echo-cmd) \
- $(cmd_$(1)); \
- echo 'cmd_$@ := $(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).cmd)
-
-
-# execute the command and also postprocess generated .d dependencies
-# file
-
-if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
- $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
- @set -e; \
- $(echo-cmd) \
- $(cmd_$(1)); \
- scripts/basic/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \
- rm -f $(depfile); \
- mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd)
-
-# Usage: $(call if_changed_rule,foo)
-# will check if $(cmd_foo) changed, or any of the prequisites changed,
-# and if so will execute $(rule_foo)
-
-if_changed_rule = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),\
- @set -e; \
- $(rule_$(1)))
-
-# If quiet is set, only print short version of command
-
-cmd = @$(if $($(quiet)cmd_$(1)),echo ' $(subst ','\'',$($(quiet)cmd_$(1)))' &&) $(cmd_$(1))
-
-# $(call descend,<dir>,<target>)
-# Recursively call a sub-make in <dir> with target <target>
-# Usage is deprecated, because make do not see this as an invocation of make.
-descend =$(Q)$(MAKE) -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj=$(1) $(2)
-
-# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
-# Usage:
-# $(Q)$(MAKE) $(build)=dir
-build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
-
-# filechk is used to check if the content of a generated file is updated.
-# Sample usage:
-# define filechk_sample
-# echo $KERNELRELEASE
-# endef
-# version.h : Makefile
-# $(call filechk,sample)
-# The rule defined shall write to stdout the content of the new file.
-# The existing file will be compared with the new one.
-# - If no file exist it is created
-# - If the content differ the new file is used
-# - If they are equal no change, and no timestamp update
-
-define filechk
- $(Q)set -e; \
- echo ' CHK $@'; \
- mkdir -p $(dir $@); \
- $(filechk_$(1)) $(2) > $@.tmp; \
- if [ -r $@ ] && cmp -s $@ $@.tmp; then \
- rm -f $@.tmp; \
- else \
- echo ' UPD $@'; \
- mv -f $@.tmp $@; \
- fi
-endef
diff -puN scripts/Makefile.modinst~git-kbuild scripts/Makefile.modinst
--- devel/scripts/Makefile.modinst~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/scripts/Makefile.modinst 2005-07-27 17:53:09.000000000 -0700
@@ -5,7 +5,7 @@
.PHONY: __modinst
__modinst:
-include scripts/Makefile.lib
+include scripts/Kbuild.include
#
diff -puN scripts/Makefile.modpost~git-kbuild scripts/Makefile.modpost
--- devel/scripts/Makefile.modpost~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/scripts/Makefile.modpost 2005-07-27 17:53:09.000000000 -0700
@@ -36,6 +36,7 @@
_modpost: __modpost
include .config
+include scripts/Kbuild.include
include scripts/Makefile.lib
symverfile := $(objtree)/Module.symvers
diff -puN scripts/mkcompile_h~git-kbuild scripts/mkcompile_h
--- devel/scripts/mkcompile_h~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/scripts/mkcompile_h 2005-07-27 17:53:09.000000000 -0700
@@ -1,7 +1,8 @@
TARGET=$1
ARCH=$2
SMP=$3
-CC=$4
+PREEMPT=$4
+CC=$5
# If compile.h exists already and we don't own autoconf.h
# (i.e. we're not the same user who did make *config), don't
@@ -26,8 +27,10 @@ fi
UTS_VERSION="#$VERSION"
-if [ -n "$SMP" ] ; then UTS_VERSION="$UTS_VERSION SMP"; fi
-UTS_VERSION="$UTS_VERSION `LC_ALL=C LANG=C date`"
+CONFIG_FLAGS=""
+if [ -n "$SMP" ] ; then CONFIG_FLAGS="SMP"; fi
+if [ -n "$PREEMPT" ] ; then CONFIG_FLAGS="$CONFIG_FLAGS PREEMPT"; fi
+UTS_VERSION="$UTS_VERSION $CONFIG_FLAGS `LC_ALL=C LANG=C date`"
# Truncate to maximum length
@@ -37,7 +40,8 @@ UTS_TRUNCATE="sed -e s/\(.\{1,$UTS_LEN\}
# Generate a temporary compile.h
( echo /\* This file is auto generated, version $VERSION \*/
-
+ if [ -n "$CONFIG_FLAGS" ] ; then echo "/* $CONFIG_FLAGS */"; fi
+
echo \#define UTS_MACHINE \"$ARCH\"
echo \#define UTS_VERSION \"`echo $UTS_VERSION | $UTS_TRUNCATE`\"
diff -puN scripts/mod/modpost.c~git-kbuild scripts/mod/modpost.c
--- devel/scripts/mod/modpost.c~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/scripts/mod/modpost.c 2005-07-27 17:53:09.000000000 -0700
@@ -359,11 +359,16 @@ handle_modversions(struct module *mod, s
/* ignore __this_module, it will be resolved shortly */
if (strcmp(symname, MODULE_SYMBOL_PREFIX "__this_module") == 0)
break;
-#ifdef STT_REGISTER
+/* cope with newer glibc (2.3.4 or higher) STT_ definition in elf.h */
+#if defined(STT_REGISTER) || defined(STT_SPARC_REGISTER)
+/* add compatibility with older glibc */
+#ifndef STT_SPARC_REGISTER
+#define STT_SPARC_REGISTER STT_REGISTER
+#endif
if (info->hdr->e_machine == EM_SPARC ||
info->hdr->e_machine == EM_SPARCV9) {
/* Ignore register directives. */
- if (ELF_ST_TYPE(sym->st_info) == STT_REGISTER)
+ if (ELF_ST_TYPE(sym->st_info) == STT_SPARC_REGISTER)
break;
}
#endif
diff -puN scripts/mod/sumversion.c~git-kbuild scripts/mod/sumversion.c
--- devel/scripts/mod/sumversion.c~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/scripts/mod/sumversion.c 2005-07-27 17:53:09.000000000 -0700
@@ -252,9 +252,9 @@ static int parse_comment(const char *fil
}
/* FIXME: Handle .s files differently (eg. # starts comments) --RR */
-static int parse_file(const signed char *fname, struct md4_ctx *md)
+static int parse_file(const char *fname, struct md4_ctx *md)
{
- signed char *file;
+ char *file;
unsigned long i, len;
file = grab_file(fname, &len);
@@ -332,7 +332,7 @@ static int parse_source_files(const char
Sum all files in the same dir or subdirs.
*/
while ((line = get_next_line(&pos, file, flen)) != NULL) {
- signed char* p = line;
+ char* p = line;
if (strncmp(line, "deps_", sizeof("deps_")-1) == 0) {
check_files = 1;
continue;
@@ -458,7 +458,7 @@ out:
close(fd);
}
-static int strip_rcs_crap(signed char *version)
+static int strip_rcs_crap(char *version)
{
unsigned int len, full_len;
diff -puN scripts/package/builddeb~git-kbuild scripts/package/builddeb
--- devel/scripts/package/builddeb~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/scripts/package/builddeb 2005-07-27 17:53:09.000000000 -0700
@@ -14,18 +14,38 @@ set -e
# Some variables and settings used throughout the script
version=$KERNELRELEASE
tmpdir="$objtree/debian/tmp"
+packagename=linux-$version
+
+if [ "$ARCH" == "um" ] ; then
+ packagename=user-mode-linux-$version
+fi
# Setup the directory structure
rm -rf "$tmpdir"
mkdir -p "$tmpdir/DEBIAN" "$tmpdir/lib" "$tmpdir/boot"
+if [ "$ARCH" == "um" ] ; then
+ mkdir -p "$tmpdir/usr/lib/uml/modules/$version" "$tmpdir/usr/share/doc/$packagename" "$tmpdir/usr/bin"
+fi
# Build and install the kernel
-cp System.map "$tmpdir/boot/System.map-$version"
-cp .config "$tmpdir/boot/config-$version"
-cp $KBUILD_IMAGE "$tmpdir/boot/vmlinuz-$version"
+if [ "$ARCH" == "um" ] ; then
+ $MAKE linux
+ cp System.map "$tmpdir/usr/lib/uml/modules/$version/System.map"
+ cp .config "$tmpdir/usr/share/doc/$packagename/config"
+ gzip "$tmpdir/usr/share/doc/$packagename/config"
+ cp $KBUILD_IMAGE "$tmpdir/usr/bin/linux-$version"
+else
+ cp System.map "$tmpdir/boot/System.map-$version"
+ cp .config "$tmpdir/boot/config-$version"
+ cp $KBUILD_IMAGE "$tmpdir/boot/vmlinuz-$version"
+fi
if grep -q '^CONFIG_MODULES=y' .config ; then
- INSTALL_MOD_PATH="$tmpdir" make modules_install
+ INSTALL_MOD_PATH="$tmpdir" make KBUILD_SRC= modules_install
+ if [ "$ARCH" == "um" ] ; then
+ mv "$tmpdir/lib/modules/$version"/* "$tmpdir/usr/lib/uml/modules/$version/"
+ rmdir "$tmpdir/lib/modules/$version"
+ fi
fi
# Install the maintainer scripts
@@ -53,6 +73,8 @@ linux ($version) unstable; urgency=low
EOF
# Generate a control file
+if [ "$ARCH" == "um" ]; then
+
cat <<EOF > debian/control
Source: linux
Section: base
@@ -60,12 +82,34 @@ Priority: optional
Maintainer: $name
Standards-Version: 3.6.1
-Package: linux-$version
+Package: $packagename
+Architecture: any
+Description: User Mode Linux kernel, version $version
+ User-mode Linux is a port of the Linux kernel to its own system call
+ interface. It provides a kind of virtual machine, which runs Linux
+ as a user process under another Linux kernel. This is useful for
+ kernel development, sandboxes, jails, experimentation, and
+ many other things.
+ .
+ This package contains the Linux kernel, modules and corresponding other
+ files version $version
+EOF
+
+else
+cat <<EOF > debian/control
+Source: linux
+Section: base
+Priority: optional
+Maintainer: $name
+Standards-Version: 3.6.1
+
+Package: $packagename
Architecture: any
Description: Linux kernel, version $version
This package contains the Linux kernel, modules and corresponding other
- files version $version.
+ files version $version
EOF
+fi
# Fix some ownership and permissions
chown -R root:root "$tmpdir"
diff -puN /dev/null scripts/package/buildtar
--- /dev/null 2003-09-15 06:40:47.000000000 -0700
+++ devel-akpm/scripts/package/buildtar 2005-07-27 17:53:09.000000000 -0700
@@ -0,0 +1,111 @@
+#!/bin/sh
+
+#
+# buildtar 0.0.3
+#
+# (C) 2004-2005 by Jan-Benedict Glaw <jbglaw@lug-owl.de>
+#
+# This script is used to compile a tarball from the currently
+# prepared kernel. Based upon the builddeb script from
+# Wichert Akkerman <wichert@wiggy.net>.
+#
+
+set -e
+
+#
+# Some variables and settings used throughout the script
+#
+version="${VERSION}.${PATCHLEVEL}.${SUBLEVEL}${EXTRAVERSION}${EXTRANAME}"
+tmpdir="${objtree}/tar-install"
+tarball="${objtree}/linux-${version}.tar"
+
+
+#
+# Figure out how to compress, if requested at all
+#
+case "${1}" in
+ tar-pkg)
+ compress="cat"
+ file_ext=""
+ ;;
+ targz-pkg)
+ compress="gzip -c9"
+ file_ext=".gz"
+ ;;
+ tarbz2-pkg)
+ compress="bzip2 -c9"
+ file_ext=".bz2"
+ ;;
+ *)
+ echo "Unknown tarball target \"${1}\" requested, please add it to ${0}." >&2
+ exit 1
+ ;;
+esac
+
+
+#
+# Clean-up and re-create the temporary directory
+#
+rm -rf -- "${tmpdir}"
+mkdir -p -- "${tmpdir}/boot"
+
+
+#
+# Try to install modules
+#
+if ! make INSTALL_MOD_PATH="${tmpdir}" modules_install; then
+ echo "" >&2
+ echo "Ignoring error at module_install time, since that could be" >&2
+ echo "a result of missing local modutils/module-init-tools," >&2
+ echo "or you just didn't compile in module support at all..." >&2
+ echo "" >&2
+fi
+
+
+#
+# Install basic kernel files
+#
+cp -v -- System.map "${tmpdir}/boot/System.map-${version}"
+cp -v -- .config "${tmpdir}/boot/config-${version}"
+cp -v -- vmlinux "${tmpdir}/boot/vmlinux-${version}"
+
+
+#
+# Install arch-specific kernel image(s)
+#
+case "${ARCH}" in
+ i386)
+ [ -f arch/i386/boot/bzImage ] && cp -v -- arch/i386/boot/bzImage "${tmpdir}/boot/vmlinuz-${version}"
+ ;;
+ alpha)
+ [ -f arch/alpha/boot/vmlinux.gz ] && cp -v -- arch/alpha/boot/vmlinux.gz "${tmpdir}/boot/vmlinuz-${version}"
+ ;;
+ vax)
+ [ -f vmlinux.SYS ] && cp -v -- vmlinux.SYS "${tmpdir}/boot/vmlinux-${version}.SYS"
+ [ -f vmlinux.dsk ] && cp -v -- vmlinux.dsk "${tmpdir}/boot/vmlinux-${version}.dsk"
+ ;;
+ *)
+ [ -f "${KBUILD_IMAGE}" ] && cp -v -- "${KBUILD_IMAGE}" "${tmpdir}/boot/vmlinux-kbuild-${version}"
+ echo "" >&2
+ echo '** ** ** WARNING ** ** **' >&2
+ echo "" >&2
+ echo "Your architecture did not define any architecture-dependant files" >&2
+ echo "to be placed into the tarball. Please add those to ${0} ..." >&2
+ echo "" >&2
+ sleep 5
+ ;;
+esac
+
+
+#
+# Create the tarball
+#
+(
+ cd "${tmpdir}"
+ tar cf - . | ${compress} > "${tarball}${file_ext}"
+)
+
+echo "Tarball successfully created in ${tarball}${file_ext}"
+
+exit 0
+
diff -puN scripts/package/Makefile~git-kbuild scripts/package/Makefile
--- devel/scripts/package/Makefile~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/scripts/package/Makefile 2005-07-27 17:53:09.000000000 -0700
@@ -59,7 +59,7 @@ $(objtree)/binkernel.spec: $(MKSPEC) $(s
$(CONFIG_SHELL) $(MKSPEC) prebuilt > $@
binrpm-pkg: $(objtree)/binkernel.spec
- $(MAKE)
+ $(MAKE) KBUILD_SRC=
set -e; \
$(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version
set -e; \
@@ -74,16 +74,30 @@ clean-files += $(objtree)/binkernel.spec
#
.PHONY: deb-pkg
deb-pkg:
- $(MAKE)
+ $(MAKE) KBUILD_SRC=
$(CONFIG_SHELL) $(srctree)/scripts/package/builddeb
clean-dirs += $(objtree)/debian/
+# tarball targets
+# ---------------------------------------------------------------------------
+.PHONY: tar%pkg
+tar%pkg:
+ $(MAKE)
+ $(CONFIG_SHELL) $(srctree)/scripts/package/buildtar $@
+
+clean-dirs += $(objtree)/tar-install/
+
+
# Help text displayed when executing 'make help'
# ---------------------------------------------------------------------------
help:
- @echo ' rpm-pkg - Build the kernel as an RPM package'
- @echo ' binrpm-pkg - Build an rpm package containing the compiled kernel & modules'
- @echo ' deb-pkg - Build the kernel as an deb package'
+ @echo ' rpm-pkg - Build the kernel as an RPM package'
+ @echo ' binrpm-pkg - Build an rpm package containing the compiled kernel'
+ @echo ' and modules'
+ @echo ' deb-pkg - Build the kernel as an deb package'
+ @echo ' tar-pkg - Build the kernel as an uncompressed tarball'
+ @echo ' targz-pkg - Build the kernel as a gzip compressed tarball'
+ @echo ' tarbz2-pkg - Build the kernel as a bzip2 compressed tarball'
diff -puN scripts/package/mkspec~git-kbuild scripts/package/mkspec
--- devel/scripts/package/mkspec~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/scripts/package/mkspec 2005-07-27 17:53:09.000000000 -0700
@@ -62,10 +62,19 @@ echo ""
fi
echo "%install"
+echo "%ifarch ia64"
+echo 'mkdir -p $RPM_BUILD_ROOT/boot/efi $RPM_BUILD_ROOT/lib $RPM_BUILD_ROOT/lib/modules'
+echo "%else"
echo 'mkdir -p $RPM_BUILD_ROOT/boot $RPM_BUILD_ROOT/lib $RPM_BUILD_ROOT/lib/modules'
+echo "%endif"
echo 'INSTALL_MOD_PATH=$RPM_BUILD_ROOT make %{_smp_mflags} modules_install'
+echo "%ifarch ia64"
+echo 'cp $KBUILD_IMAGE $RPM_BUILD_ROOT'"/boot/efi/vmlinuz-$KERNELRELEASE"
+echo 'ln -s '"efi/vmlinuz-$KERNELRELEASE" '$RPM_BUILD_ROOT'"/boot/"
+echo "%else"
echo 'cp $KBUILD_IMAGE $RPM_BUILD_ROOT'"/boot/vmlinuz-$KERNELRELEASE"
+echo "%endif"
echo 'cp System.map $RPM_BUILD_ROOT'"/boot/System.map-$KERNELRELEASE"
diff -puN scripts/reference_discarded.pl~git-kbuild scripts/reference_discarded.pl
--- devel/scripts/reference_discarded.pl~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/scripts/reference_discarded.pl 2005-07-27 17:53:09.000000000 -0700
@@ -96,6 +96,7 @@ foreach $object (keys(%object)) {
$from !~ /\.debug_ranges$/ &&
$from !~ /\.debug_line$/ &&
$from !~ /\.debug_frame$/ &&
+ $from !~ /\.debug_loc$/ &&
$from !~ /\.exitcall\.exit$/ &&
$from !~ /\.eh_frame$/ &&
$from !~ /\.stab$/)) {
diff -puN scripts/reference_init.pl~git-kbuild scripts/reference_init.pl
--- devel/scripts/reference_init.pl~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/scripts/reference_init.pl 2005-07-27 17:53:09.000000000 -0700
@@ -98,6 +98,7 @@ foreach $object (sort(keys(%object))) {
$from !~ /\.pdr$/ &&
$from !~ /\__param$/ &&
$from !~ /\.altinstructions/ &&
+ $from !~ /\.eh_frame/ &&
$from !~ /\.debug_/)) {
printf("Error: %s %s refers to %s\n", $object, $from, $line);
}
diff -puN usr/Makefile~git-kbuild usr/Makefile
--- devel/usr/Makefile~git-kbuild 2005-07-27 17:53:08.000000000 -0700
+++ devel-akpm/usr/Makefile 2005-07-27 17:53:09.000000000 -0700
@@ -27,7 +27,7 @@ quotefixed_initramfs_source := $(shell e
filechk_initramfs_list = $(CONFIG_SHELL) \
$(srctree)/scripts/gen_initramfs_list.sh $(gen_initramfs_args) $(quotefixed_initramfs_source)
-$(obj)/initramfs_list: FORCE
+$(obj)/initramfs_list: $(obj)/Makefile FORCE
$(call filechk,initramfs_list)
quiet_cmd_cpio = CPIO $@
_