From: Olaf Hering <olh@suse.de>
changing CONFIG_LOCALVERSION rebuilds too much, for no appearent reason.
remove code for obsolete kernels
Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
---
dev/null | 200 -----------------------
drivers/scsi/3w-xxxx.h | 1
drivers/scsi/a2091.c | 1
drivers/scsi/aic7xxx/aic79xx_osm.c | 262 -------------------------------
drivers/scsi/aic7xxx/aic79xx_osm.h | 20 --
drivers/scsi/aic7xxx/aic79xx_osm_pci.c | 6
drivers/scsi/aic7xxx/aic79xx_proc.c | 12 -
drivers/scsi/aic7xxx/aic7xxx_osm.h | 1
drivers/scsi/aic7xxx/aiclib.c | 1
drivers/scsi/aic7xxx/aiclib.h | 10 -
drivers/scsi/amiga7xx.c | 1
drivers/scsi/bvme6000.c | 1
drivers/scsi/cpqfcTSinit.c | 32 ---
drivers/scsi/dpt/dpti_i2o.h | 11 -
drivers/scsi/gvp11.c | 1
drivers/scsi/ibmmca.c | 6
drivers/scsi/ips.c | 104 ------------
drivers/scsi/ips.h | 33 ---
drivers/scsi/megaraid/mega_common.h | 1
drivers/scsi/megaraid/megaraid_mm.h | 1
drivers/scsi/mvme147.c | 1
drivers/scsi/mvme16x.c | 1
drivers/scsi/pcmcia/nsp_cs.c | 158 ------------------
drivers/scsi/pcmcia/nsp_cs.h | 68 --------
drivers/scsi/qla1280.c | 277 ---------------------------------
drivers/scsi/scsi_debug.c | 4
drivers/scsi/sg.c | 4
drivers/scsi/sgiwd93.c | 1
drivers/scsi/wd33c93.c | 1
29 files changed, 1220 deletions(-)
diff -puN drivers/scsi/3w-xxxx.h~remove-linux-versionh-from-drivers-scsi drivers/scsi/3w-xxxx.h
--- devel/drivers/scsi/3w-xxxx.h~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/3w-xxxx.h 2005-07-26 00:39:01.000000000 -0700
@@ -54,7 +54,6 @@
#ifndef _3W_XXXX_H
#define _3W_XXXX_H
-#include <linux/version.h>
#include <linux/types.h>
/* AEN strings */
diff -puN drivers/scsi/a2091.c~remove-linux-versionh-from-drivers-scsi drivers/scsi/a2091.c
--- devel/drivers/scsi/a2091.c~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/a2091.c 2005-07-26 00:39:01.000000000 -0700
@@ -2,7 +2,6 @@
#include <linux/mm.h>
#include <linux/blkdev.h>
#include <linux/sched.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/interrupt.h>
diff -puN drivers/scsi/aic7xxx/aic79xx_osm.c~remove-linux-versionh-from-drivers-scsi drivers/scsi/aic7xxx/aic79xx_osm.c
--- devel/drivers/scsi/aic7xxx/aic79xx_osm.c~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/aic7xxx/aic79xx_osm.c 2005-07-26 00:39:01.000000000 -0700
@@ -54,10 +54,6 @@
#include <linux/init.h> /* __setup */
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-#include "sd.h" /* For geometry detection */
-#endif
-
#include <linux/mm.h> /* For fetching system memory size */
#include <linux/delay.h> /* For ssleep/msleep */
@@ -66,11 +62,6 @@
*/
spinlock_t ahd_list_spinlock;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-/* For dynamic sglist size calculation. */
-u_int ahd_linux_nseg;
-#endif
-
/*
* Bucket size for counting good commands in between bad ones.
*/
@@ -709,7 +700,6 @@ ahd_linux_unmap_scb(struct ahd_softc *ah
static int ahd_linux_detect(Scsi_Host_Template *);
static const char *ahd_linux_info(struct Scsi_Host *);
static int ahd_linux_queue(Scsi_Cmnd *, void (*)(Scsi_Cmnd *));
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
static int ahd_linux_slave_alloc(Scsi_Device *);
static int ahd_linux_slave_configure(Scsi_Device *);
static void ahd_linux_slave_destroy(Scsi_Device *);
@@ -717,14 +707,6 @@ static void ahd_linux_slave_destroy(S
static int ahd_linux_biosparam(struct scsi_device*,
struct block_device*, sector_t, int[]);
#endif
-#else
-static int ahd_linux_release(struct Scsi_Host *);
-static void ahd_linux_select_queue_depth(struct Scsi_Host *host,
- Scsi_Device *scsi_devs);
-#if defined(__i386__)
-static int ahd_linux_biosparam(Disk *, kdev_t, int[]);
-#endif
-#endif
static int ahd_linux_bus_reset(Scsi_Cmnd *);
static int ahd_linux_dev_reset(Scsi_Cmnd *);
static int ahd_linux_abort(Scsi_Cmnd *);
@@ -749,45 +731,6 @@ static int ahd_linux_abort(Scsi_Cmnd
static void
ahd_linux_size_nseg(void)
{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- u_int cur_size;
- u_int best_size;
-
- /*
- * The SCSI allocator rounds to the nearest 512 bytes
- * an cannot allocate across a page boundary. Our algorithm
- * is to start at 1K of scsi malloc space per-command and
- * loop through all factors of the PAGE_SIZE and pick the best.
- */
- best_size = 0;
- for (cur_size = 1024; cur_size <= PAGE_SIZE; cur_size *= 2) {
- u_int nseg;
-
- nseg = cur_size / sizeof(struct scatterlist);
- if (nseg < AHD_LINUX_MIN_NSEG)
- continue;
-
- if (best_size == 0) {
- best_size = cur_size;
- ahd_linux_nseg = nseg;
- } else {
- u_int best_rem;
- u_int cur_rem;
-
- /*
- * Compare the traits of the current "best_size"
- * with the current size to determine if the
- * current size is a better size.
- */
- best_rem = best_size % sizeof(struct scatterlist);
- cur_rem = cur_size % sizeof(struct scatterlist);
- if (cur_rem < best_rem) {
- best_size = cur_size;
- ahd_linux_nseg = nseg;
- }
- }
- }
-#endif
}
/*
@@ -800,14 +743,6 @@ ahd_linux_detect(Scsi_Host_Template *tem
int found;
int error = 0;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- /*
- * It is a bug that the upper layer takes
- * this lock just prior to calling us.
- */
- spin_unlock_irq(&io_request_lock);
-#endif
-
/*
* Sanity checking of Linux SCSI data structures so
* that some of our hacks^H^H^H^H^Hassumptions aren't
@@ -855,47 +790,10 @@ ahd_linux_detect(Scsi_Host_Template *tem
if (ahd_linux_register_host(ahd, template) == 0)
found++;
}
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- spin_lock_irq(&io_request_lock);
-#endif
aic79xx_detect_complete++;
return 0;
}
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-/*
- * Free the passed in Scsi_Host memory structures prior to unloading the
- * module.
- */
-static int
-ahd_linux_release(struct Scsi_Host * host)
-{
- struct ahd_softc *ahd;
- u_long l;
-
- ahd_list_lock(&l);
- if (host != NULL) {
-
- /*
- * We should be able to just perform
- * the free directly, but check our
- * list for extra sanity.
- */
- ahd = ahd_find_softc(*(struct ahd_softc **)host->hostdata);
- if (ahd != NULL) {
- u_long s;
-
- ahd_lock(ahd, &s);
- ahd_intr_enable(ahd, FALSE);
- ahd_unlock(ahd, &s);
- ahd_free(ahd);
- }
- }
- ahd_list_unlock(&l);
- return (0);
-}
-#endif
-
/*
* Return a string describing the driver.
*/
@@ -983,7 +881,6 @@ ahd_linux_queue(Scsi_Cmnd * cmd, void (*
return (0);
}
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
static int
ahd_linux_slave_alloc(Scsi_Device *device)
{
@@ -1056,92 +953,16 @@ ahd_linux_slave_destroy(Scsi_Device *dev
}
ahd_midlayer_entrypoint_unlock(ahd, &flags);
}
-#else
-/*
- * Sets the queue depth for each SCSI device hanging
- * off the input host adapter.
- */
-static void
-ahd_linux_select_queue_depth(struct Scsi_Host * host,
- Scsi_Device * scsi_devs)
-{
- Scsi_Device *device;
- Scsi_Device *ldev;
- struct ahd_softc *ahd;
- u_long flags;
-
- ahd = *((struct ahd_softc **)host->hostdata);
- ahd_lock(ahd, &flags);
- for (device = scsi_devs; device != NULL; device = device->next) {
-
- /*
- * Watch out for duplicate devices. This works around
- * some quirks in how the SCSI scanning code does its
- * device management.
- */
- for (ldev = scsi_devs; ldev != device; ldev = ldev->next) {
- if (ldev->host == device->host
- && ldev->channel == device->channel
- && ldev->id == device->id
- && ldev->lun == device->lun)
- break;
- }
- /* Skip duplicate. */
- if (ldev != device)
- continue;
-
- if (device->host == host) {
- struct ahd_linux_device *dev;
-
- /*
- * Since Linux has attached to the device, configure
- * it so we don't free and allocate the device
- * structure on every command.
- */
- dev = ahd_linux_get_device(ahd, device->channel,
- device->id, device->lun,
- /*alloc*/TRUE);
- if (dev != NULL) {
- dev->flags &= ~AHD_DEV_UNCONFIGURED;
- dev->scsi_device = device;
- ahd_linux_device_queue_depth(ahd, dev);
- device->queue_depth = dev->openings
- + dev->active;
- if ((dev->flags & (AHD_DEV_Q_BASIC
- | AHD_DEV_Q_TAGGED)) == 0) {
- /*
- * We allow the OS to queue 2 untagged
- * transactions to us at any time even
- * though we can only execute them
- * serially on the controller/device.
- * This should remove some latency.
- */
- device->queue_depth = 2;
- }
- }
- }
- }
- ahd_unlock(ahd, &flags);
-}
-#endif
#if defined(__i386__)
/*
* Return the disk geometry for the given SCSI device.
*/
static int
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
ahd_linux_biosparam(struct scsi_device *sdev, struct block_device *bdev,
sector_t capacity, int geom[])
{
uint8_t *bh;
-#else
-ahd_linux_biosparam(Disk *disk, kdev_t dev, int geom[])
-{
- struct scsi_device *sdev = disk->device;
- u_long capacity = disk->capacity;
- struct buffer_head *bh;
-#endif
int heads;
int sectors;
int cylinders;
@@ -1151,22 +972,12 @@ ahd_linux_biosparam(Disk *disk, kdev_t d
ahd = *((struct ahd_softc **)sdev->host->hostdata);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
bh = scsi_bios_ptable(bdev);
-#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,17)
- bh = bread(MKDEV(MAJOR(dev), MINOR(dev) & ~0xf), 0, block_size(dev));
-#else
- bh = bread(MKDEV(MAJOR(dev), MINOR(dev) & ~0xf), 0, 1024);
-#endif
if (bh) {
ret = scsi_partsize(bh, capacity,
&geom[2], &geom[0], &geom[1]);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
kfree(bh);
-#else
- brelse(bh);
-#endif
if (ret != -1)
return (ret);
}
@@ -1997,11 +1808,7 @@ ahd_linux_register_host(struct ahd_softc
*((struct ahd_softc **)host->hostdata) = ahd;
ahd_lock(ahd, &s);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
scsi_assign_lock(host, &ahd->platform_data->spin_lock);
-#elif AHD_SCSI_HAS_HOST_LOCK != 0
- host->lock = &ahd->platform_data->spin_lock;
-#endif
ahd->platform_data->host = host;
host->can_queue = AHD_MAX_QUEUE;
host->cmd_per_lun = 2;
@@ -2020,9 +1827,6 @@ ahd_linux_register_host(struct ahd_softc
ahd_set_name(ahd, new_name);
}
host->unique_id = ahd->unit;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- scsi_set_pci_device(host, ahd->dev_softc);
-#endif
ahd_linux_setup_user_rd_strm_settings(ahd);
ahd_linux_initialize_scsi_bus(ahd);
ahd_unlock(ahd, &s);
@@ -2064,10 +1868,8 @@ ahd_linux_register_host(struct ahd_softc
ahd_linux_start_dv(ahd);
ahd_unlock(ahd, &s);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
scsi_add_host(host, &ahd->dev_softc->dev); /* XXX handle failure */
scsi_scan_host(host);
-#endif
return (0);
}
@@ -2192,9 +1994,7 @@ ahd_platform_free(struct ahd_softc *ahd)
ahd_linux_kill_dv_thread(ahd);
ahd_teardown_runq_tasklet(ahd);
if (ahd->platform_data->host != NULL) {
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
scsi_remove_host(ahd->platform_data->host);
-#endif
scsi_host_put(ahd->platform_data->host);
}
@@ -2233,16 +2033,6 @@ ahd_platform_free(struct ahd_softc *ahd)
release_mem_region(ahd->platform_data->mem_busaddr,
0x1000);
}
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- /*
- * In 2.4 we detach from the scsi midlayer before the PCI
- * layer invokes our remove callback. No per-instance
- * detach is provided, so we must reach inside the PCI
- * subsystem's internals and detach our driver manually.
- */
- if (ahd->dev_softc != NULL)
- ahd->dev_softc->driver = NULL;
-#endif
free(ahd->platform_data, M_DEVBUF);
}
}
@@ -2339,7 +2129,6 @@ ahd_platform_set_tags(struct ahd_softc *
dev->maxtags = 0;
dev->openings = 1 - dev->active;
}
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
if (dev->scsi_device != NULL) {
switch ((dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED))) {
case AHD_DEV_Q_BASIC:
@@ -2365,7 +2154,6 @@ ahd_platform_set_tags(struct ahd_softc *
break;
}
}
-#endif
}
int
@@ -2478,18 +2266,8 @@ ahd_linux_dv_thread(void *data)
* Complete thread creation.
*/
lock_kernel();
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,60)
- /*
- * Don't care about any signals.
- */
- siginitsetinv(¤t->blocked, 0);
-
- daemonize();
- sprintf(current->comm, "ahd_dv_%d", ahd->unit);
-#else
daemonize("ahd_dv_%d", ahd->unit);
current->flags |= PF_NOFREEZE;
-#endif
unlock_kernel();
while (1) {
@@ -3985,7 +3763,6 @@ ahd_linux_run_device_queue(struct ahd_so
}
if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) != 0) {
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
int msg_bytes;
uint8_t tag_msgs[2];
@@ -3995,7 +3772,6 @@ ahd_linux_run_device_queue(struct ahd_so
if (tag_msgs[0] == MSG_ORDERED_TASK)
dev->commands_since_idle_or_otag = 0;
} else
-#endif
if (dev->commands_since_idle_or_otag == AHD_OTAG_THRESH
&& (dev->flags & AHD_DEV_Q_TAGGED) != 0) {
hscb->control |= MSG_ORDERED_TASK;
@@ -4264,28 +4040,9 @@ ahd_send_async(struct ahd_softc *ahd, ch
}
case AC_SENT_BDR:
{
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
WARN_ON(lun != CAM_LUN_WILDCARD);
scsi_report_device_reset(ahd->platform_data->host,
channel - 'A', target);
-#else
- Scsi_Device *scsi_dev;
-
- /*
- * Find the SCSI device associated with this
- * request and indicate that a UA is expected.
- */
- for (scsi_dev = ahd->platform_data->host->host_queue;
- scsi_dev != NULL; scsi_dev = scsi_dev->next) {
- if (channel - 'A' == scsi_dev->channel
- && target == scsi_dev->id
- && (lun == CAM_LUN_WILDCARD
- || lun == scsi_dev->lun)) {
- scsi_dev->was_reset = 1;
- scsi_dev->expecting_cc_ua = 1;
- }
- }
-#endif
break;
}
case AC_BUS_RESET:
@@ -4972,18 +4729,7 @@ ahd_platform_dump_card_state(struct ahd_
static int __init
ahd_linux_init(void)
{
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
return ahd_linux_detect(&aic79xx_driver_template);
-#else
- scsi_register_module(MODULE_SCSI_HA, &aic79xx_driver_template);
- if (aic79xx_driver_template.present == 0) {
- scsi_unregister_module(MODULE_SCSI_HA,
- &aic79xx_driver_template);
- return (-ENODEV);
- }
-
- return (0);
-#endif
}
static void __exit
@@ -5002,14 +4748,6 @@ ahd_linux_exit(void)
ahd_linux_kill_dv_thread(ahd);
}
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- /*
- * In 2.4 we have to unregister from the PCI core _after_
- * unregistering from the scsi midlayer to avoid dangling
- * references.
- */
- scsi_unregister_module(MODULE_SCSI_HA, &aic79xx_driver_template);
-#endif
ahd_linux_pci_exit();
}
diff -puN drivers/scsi/aic7xxx/aic79xx_osm.h~remove-linux-versionh-from-drivers-scsi drivers/scsi/aic7xxx/aic79xx_osm.h
--- devel/drivers/scsi/aic7xxx/aic79xx_osm.h~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/aic7xxx/aic79xx_osm.h 2005-07-26 00:39:01.000000000 -0700
@@ -48,7 +48,6 @@
#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/smp_lock.h>
-#include <linux/version.h>
#include <linux/module.h>
#include <asm/byteorder.h>
#include <asm/io.h>
@@ -252,11 +251,7 @@ ahd_scb_timer_reset(struct scb *scb, u_i
/***************************** SMP support ************************************/
#include <linux/spinlock.h>
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) || defined(SCSI_HAS_HOST_LOCK))
#define AHD_SCSI_HAS_HOST_LOCK 1
-#else
-#define AHD_SCSI_HAS_HOST_LOCK 0
-#endif
#define AIC79XX_DRIVER_VERSION "1.3.11"
@@ -453,18 +448,7 @@ struct ahd_linux_target {
* manner and are allocated below 4GB, the number of S/G segments is
* unrestricted.
*/
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-/*
- * We dynamically adjust the number of segments in pre-2.5 kernels to
- * avoid fragmentation issues in the SCSI mid-layer's private memory
- * allocator. See aic79xx_osm.c ahd_linux_size_nseg() for details.
- */
-extern u_int ahd_linux_nseg;
-#define AHD_NSEG ahd_linux_nseg
-#define AHD_LINUX_MIN_NSEG 64
-#else
#define AHD_NSEG 128
-#endif
/*
* Per-SCB OSM storage.
@@ -923,12 +907,8 @@ ahd_flush_device_writes(struct ahd_softc
}
/**************************** Proc FS Support *********************************/
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-int ahd_linux_proc_info(char *, char **, off_t, int, int, int);
-#else
int ahd_linux_proc_info(struct Scsi_Host *, char *, char **,
off_t, int, int);
-#endif
/*************************** Domain Validation ********************************/
#define AHD_DV_CMD(cmd) ((cmd)->scsi_done == ahd_linux_dv_complete)
diff -puN drivers/scsi/aic7xxx/aic79xx_osm_pci.c~remove-linux-versionh-from-drivers-scsi drivers/scsi/aic7xxx/aic79xx_osm_pci.c
--- devel/drivers/scsi/aic7xxx/aic79xx_osm_pci.c~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/aic7xxx/aic79xx_osm_pci.c 2005-07-26 00:39:01.000000000 -0700
@@ -195,13 +195,7 @@ ahd_linux_pci_dev_probe(struct pci_dev *
}
pci_set_drvdata(pdev, ahd);
if (aic79xx_detect_complete) {
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
ahd_linux_register_host(ahd, &aic79xx_driver_template);
-#else
- printf("aic79xx: ignoring PCI device found after "
- "initialization\n");
- return (-ENODEV);
-#endif
}
return (0);
}
diff -puN drivers/scsi/aic7xxx/aic79xx_proc.c~remove-linux-versionh-from-drivers-scsi drivers/scsi/aic7xxx/aic79xx_proc.c
--- devel/drivers/scsi/aic7xxx/aic79xx_proc.c~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/aic7xxx/aic79xx_proc.c 2005-07-26 00:39:01.000000000 -0700
@@ -278,13 +278,8 @@ done:
* Return information to handle /proc support for the driver.
*/
int
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-ahd_linux_proc_info(char *buffer, char **start, off_t offset,
- int length, int hostno, int inout)
-#else
ahd_linux_proc_info(struct Scsi_Host *shost, char *buffer, char **start,
off_t offset, int length, int inout)
-#endif
{
struct ahd_softc *ahd;
struct info_str info;
@@ -296,14 +291,7 @@ ahd_linux_proc_info(struct Scsi_Host *sh
retval = -EINVAL;
ahd_list_lock(&l);
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- TAILQ_FOREACH(ahd, &ahd_tailq, links) {
- if (ahd->platform_data->host->host_no == hostno)
- break;
- }
-#else
ahd = ahd_find_softc(*(struct ahd_softc **)shost->hostdata);
-#endif
if (ahd == NULL)
goto done;
diff -puN drivers/scsi/aic7xxx/aic7xxx_osm.h~remove-linux-versionh-from-drivers-scsi drivers/scsi/aic7xxx/aic7xxx_osm.h
--- devel/drivers/scsi/aic7xxx/aic7xxx_osm.h~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/aic7xxx/aic7xxx_osm.h 2005-07-26 00:39:01.000000000 -0700
@@ -66,7 +66,6 @@
#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/smp_lock.h>
-#include <linux/version.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/slab.h>
diff -puN drivers/scsi/aic7xxx/aiclib.c~remove-linux-versionh-from-drivers-scsi drivers/scsi/aic7xxx/aiclib.c
--- devel/drivers/scsi/aic7xxx/aiclib.c~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/aic7xxx/aiclib.c 2005-07-26 00:39:01.000000000 -0700
@@ -32,7 +32,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
-#include <linux/version.h>
/* Core SCSI definitions */
#include <scsi/scsi_host.h>
diff -puN drivers/scsi/aic7xxx/aiclib.h~remove-linux-versionh-from-drivers-scsi drivers/scsi/aic7xxx/aiclib.h
--- devel/drivers/scsi/aic7xxx/aiclib.h~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/aic7xxx/aiclib.h 2005-07-26 00:39:01.000000000 -0700
@@ -866,15 +866,6 @@ typedef enum {
extern const char *scsi_sense_key_text[];
/************************* Large Disk Handling ********************************/
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-static __inline int aic_sector_div(u_long capacity, int heads, int sectors);
-
-static __inline int
-aic_sector_div(u_long capacity, int heads, int sectors)
-{
- return (capacity / (heads * sectors));
-}
-#else
static __inline int aic_sector_div(sector_t capacity, int heads, int sectors);
static __inline int
@@ -884,7 +875,6 @@ aic_sector_div(sector_t capacity, int he
sector_div(capacity, (heads * sectors));
return (int)capacity;
}
-#endif
/**************************** Module Library Hack *****************************/
/*
diff -puN drivers/scsi/amiga7xx.c~remove-linux-versionh-from-drivers-scsi drivers/scsi/amiga7xx.c
--- devel/drivers/scsi/amiga7xx.c~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/amiga7xx.c 2005-07-26 00:39:01.000000000 -0700
@@ -11,7 +11,6 @@
#include <linux/mm.h>
#include <linux/blkdev.h>
#include <linux/sched.h>
-#include <linux/version.h>
#include <linux/config.h>
#include <linux/zorro.h>
#include <linux/stat.h>
diff -puN drivers/scsi/bvme6000.c~remove-linux-versionh-from-drivers-scsi drivers/scsi/bvme6000.c
--- devel/drivers/scsi/bvme6000.c~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/bvme6000.c 2005-07-26 00:39:01.000000000 -0700
@@ -7,7 +7,6 @@
#include <linux/mm.h>
#include <linux/blkdev.h>
#include <linux/sched.h>
-#include <linux/version.h>
#include <linux/zorro.h>
#include <asm/setup.h>
diff -puN drivers/scsi/cpqfcTSinit.c~remove-linux-versionh-from-drivers-scsi drivers/scsi/cpqfcTSinit.c
--- devel/drivers/scsi/cpqfcTSinit.c~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/cpqfcTSinit.c 2005-07-26 00:39:01.000000000 -0700
@@ -34,7 +34,6 @@
#include <linux/config.h>
#include <linux/interrupt.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/blkdev.h>
#include <linux/kernel.h>
#include <linux/string.h>
@@ -66,37 +65,10 @@ MODULE_LICENSE("GPL");
int cpqfcTS_TargetDeviceReset( Scsi_Device *ScsiDev, unsigned int reset_flags);
-// This struct was originally defined in
-// /usr/src/linux/include/linux/proc_fs.h
-// since it's only partially implemented, we only use first
-// few fields...
-// NOTE: proc_fs changes in 2.4 kernel
-
-#if LINUX_VERSION_CODE < LinuxVersionCode(2,3,27)
-static struct proc_dir_entry proc_scsi_cpqfcTS =
-{
- PROC_SCSI_CPQFCTS, // ushort low_ino (enumerated list)
- 7, // ushort namelen
- DEV_NAME, // const char* name
- S_IFDIR | S_IRUGO | S_IXUGO, // mode_t mode
- 2 // nlink_t nlink
- // etc. ...
-};
-
-
-#endif
-
-#if LINUX_VERSION_CODE >= LinuxVersionCode(2,4,7)
# define CPQFC_DECLARE_COMPLETION(x) DECLARE_COMPLETION(x)
# define CPQFC_WAITING waiting
# define CPQFC_COMPLETE(x) complete(x)
# define CPQFC_WAIT_FOR_COMPLETION(x) wait_for_completion(x);
-#else
-# define CPQFC_DECLARE_COMPLETION(x) DECLARE_MUTEX_LOCKED(x)
-# define CPQFC_WAITING sem
-# define CPQFC_COMPLETE(x) up(x)
-# define CPQFC_WAIT_FOR_COMPLETION(x) down(x)
-#endif
static int cpqfc_alloc_private_data_pool(CPQFCHBA *hba);
@@ -288,11 +260,7 @@ int cpqfcTS_detect(Scsi_Host_Template *S
ENTER("cpqfcTS_detect");
-#if LINUX_VERSION_CODE < LinuxVersionCode(2,3,27)
- ScsiHostTemplate->proc_dir = &proc_scsi_cpqfcTS;
-#else
ScsiHostTemplate->proc_name = "cpqfcTS";
-#endif
for( i=0; i < HBA_TYPES; i++)
{
diff -puN drivers/scsi/dpt/dpti_i2o.h~remove-linux-versionh-from-drivers-scsi drivers/scsi/dpt/dpti_i2o.h
--- devel/drivers/scsi/dpt/dpti_i2o.h~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/dpt/dpti_i2o.h 2005-07-26 00:39:01.000000000 -0700
@@ -22,7 +22,6 @@
#include <linux/i2o-dev.h>
#include <asm/semaphore.h> /* Needed for MUTEX init macros */
-#include <linux/version.h>
#include <linux/config.h>
#include <linux/notifier.h>
#include <asm/atomic.h>
@@ -48,21 +47,11 @@
* I2O Interface Objects
*/
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0)
-
-#define DECLARE_MUTEX(name) struct semaphore name=MUTEX
-
-typedef struct wait_queue *adpt_wait_queue_head_t;
-#define ADPT_DECLARE_WAIT_QUEUE_HEAD(wait) adpt_wait_queue_head_t wait = NULL
-typedef struct wait_queue adpt_wait_queue_t;
-#else
-
#include <linux/wait.h>
typedef wait_queue_head_t adpt_wait_queue_head_t;
#define ADPT_DECLARE_WAIT_QUEUE_HEAD(wait) DECLARE_WAIT_QUEUE_HEAD(wait)
typedef wait_queue_t adpt_wait_queue_t;
-#endif
/*
* message structures
*/
diff -puN drivers/scsi/gvp11.c~remove-linux-versionh-from-drivers-scsi drivers/scsi/gvp11.c
--- devel/drivers/scsi/gvp11.c~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/gvp11.c 2005-07-26 00:39:01.000000000 -0700
@@ -2,7 +2,6 @@
#include <linux/mm.h>
#include <linux/blkdev.h>
#include <linux/sched.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/interrupt.h>
diff -puN drivers/scsi/ibmmca.c~remove-linux-versionh-from-drivers-scsi drivers/scsi/ibmmca.c
--- devel/drivers/scsi/ibmmca.c~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/ibmmca.c 2005-07-26 00:39:01.000000000 -0700
@@ -18,12 +18,6 @@
*/
#include <linux/config.h>
-#ifndef LINUX_VERSION_CODE
-#include <linux/version.h>
-#endif
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,45)
-#error "This driver works only with kernel 2.5.45 or higher!"
-#endif
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
diff -puN drivers/scsi/ips.c~remove-linux-versionh-from-drivers-scsi drivers/scsi/ips.c
--- devel/drivers/scsi/ips.c~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/ips.c 2005-07-26 00:39:01.000000000 -0700
@@ -162,7 +162,6 @@
#include <asm/byteorder.h>
#include <asm/page.h>
#include <linux/stddef.h>
-#include <linux/version.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/kernel.h>
@@ -180,12 +179,7 @@
#include <scsi/sg.h>
#include "scsi.h"
-
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,0)
-#include "hosts.h"
-#else
#include <scsi/scsi_host.h>
-#endif
#include "ips.h"
@@ -214,21 +208,10 @@ module_param(ips, charp, 0);
#warning "This driver has only been tested on the x86/ia64/x86_64 platforms"
#endif
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,0)
-#include <linux/blk.h>
-#include "sd.h"
-#define IPS_SG_ADDRESS(sg) ((sg)->address)
-#define IPS_LOCK_SAVE(lock,flags) spin_lock_irqsave(&io_request_lock,flags)
-#define IPS_UNLOCK_RESTORE(lock,flags) spin_unlock_irqrestore(&io_request_lock,flags)
-#ifndef __devexit_p
-#define __devexit_p(x) x
-#endif
-#else
#define IPS_SG_ADDRESS(sg) (page_address((sg)->page) ? \
page_address((sg)->page)+(sg)->offset : NULL)
#define IPS_LOCK_SAVE(lock,flags) do{spin_lock(lock);(void)flags;}while(0)
#define IPS_UNLOCK_RESTORE(lock,flags) do{spin_unlock(lock);(void)flags;}while(0)
-#endif
#define IPS_DMA_DIR(scb) ((!scb->scsi_cmd || ips_is_passthru(scb->scsi_cmd) || \
DMA_NONE == scb->scsi_cmd->sc_data_direction) ? \
@@ -384,24 +367,13 @@ static Scsi_Host_Template ips_driver_tem
.eh_abort_handler = ips_eh_abort,
.eh_host_reset_handler = ips_eh_reset,
.proc_name = "ips",
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
.proc_info = ips_proc_info,
.slave_configure = ips_slave_configure,
-#else
- .proc_info = ips_proc24_info,
- .select_queue_depths = ips_select_queue_depth,
-#endif
.bios_param = ips_biosparam,
.this_id = -1,
.sg_tablesize = IPS_MAX_SG,
.cmd_per_lun = 3,
.use_clustering = ENABLE_CLUSTERING,
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- .use_new_eh_code = 1,
-#endif
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) && LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- .highmem_io = 1,
-#endif
};
static IPS_DEFINE_COMPAT_TABLE( Compatable ); /* Version Compatability Table */
@@ -1186,17 +1158,10 @@ ips_queue(Scsi_Cmnd * SC, void (*done) (
/* */
/****************************************************************************/
static int
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-ips_biosparam(Disk * disk, kdev_t dev, int geom[])
-{
- ips_ha_t *ha = (ips_ha_t *) disk->device->host->hostdata;
- unsigned long capacity = disk->capacity;
-#else
ips_biosparam(struct scsi_device *sdev, struct block_device *bdev,
sector_t capacity, int geom[])
{
ips_ha_t *ha = (ips_ha_t *) sdev->host->hostdata;
-#endif
int heads;
int sectors;
int cylinders;
@@ -1234,70 +1199,6 @@ ips_biosparam(struct scsi_device *sdev,
return (0);
}
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-
-/* ips_proc24_info is a wrapper around ips_proc_info *
- * for compatibility with the 2.4 scsi parameters */
-static int
-ips_proc24_info(char *buffer, char **start, off_t offset, int length,
- int hostno, int func)
-{
- int i;
-
- for (i = 0; i < ips_next_controller; i++) {
- if (ips_sh[i] && ips_sh[i]->host_no == hostno) {
- return ips_proc_info(ips_sh[i], buffer, start,
- offset, length, func);
- }
- }
- return -EINVAL;
-}
-
-/****************************************************************************/
-/* */
-/* Routine Name: ips_select_queue_depth */
-/* */
-/* Routine Description: */
-/* */
-/* Select queue depths for the devices on the contoller */
-/* */
-/****************************************************************************/
-static void
-ips_select_queue_depth(struct Scsi_Host *host, Scsi_Device * scsi_devs)
-{
- Scsi_Device *device;
- ips_ha_t *ha;
- int count = 0;
- int min;
-
- ha = IPS_HA(host);
- min = ha->max_cmds / 4;
-
- for (device = scsi_devs; device; device = device->next) {
- if (device->host == host) {
- if ((device->channel == 0) && (device->type == 0))
- count++;
- }
- }
-
- for (device = scsi_devs; device; device = device->next) {
- if (device->host == host) {
- if ((device->channel == 0) && (device->type == 0)) {
- device->queue_depth =
- (ha->max_cmds - 1) / count;
- if (device->queue_depth < min)
- device->queue_depth = min;
- } else {
- device->queue_depth = 2;
- }
-
- if (device->queue_depth < 2)
- device->queue_depth = 2;
- }
- }
-}
-
-#else
/****************************************************************************/
/* */
/* Routine Name: ips_slave_configure */
@@ -1322,7 +1223,6 @@ ips_slave_configure(Scsi_Device * SDptr)
}
return 0;
}
-#endif
/****************************************************************************/
/* */
@@ -7044,9 +6944,7 @@ ips_register_scsi(int index)
sh->unchecked_isa_dma = sh->hostt->unchecked_isa_dma;
sh->use_clustering = sh->hostt->use_clustering;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,7)
sh->max_sectors = 128;
-#endif
sh->max_id = ha->ntargets;
sh->max_lun = ha->nlun;
@@ -7470,9 +7368,7 @@ ips_init_phase2(int index)
return SUCCESS;
}
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,9)
MODULE_LICENSE("GPL");
-#endif
MODULE_DESCRIPTION("IBM ServeRAID Adapter Driver " IPS_VER_STRING);
diff -puN drivers/scsi/ips.h~remove-linux-versionh-from-drivers-scsi drivers/scsi/ips.h
--- devel/drivers/scsi/ips.h~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/ips.h 2005-07-26 00:39:01.000000000 -0700
@@ -56,9 +56,7 @@
/*
* Some handy macros
*/
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) || defined CONFIG_HIGHIO
#define IPS_HIGHIO
- #endif
#define IPS_HA(x) ((ips_ha_t *) x->hostdata)
#define IPS_COMMAND_ID(ha, scb) (int) (scb - ha->scbs)
@@ -82,31 +80,7 @@
#define IPS_SGLIST_SIZE(ha) (IPS_USE_ENH_SGLIST(ha) ? \
sizeof(IPS_ENH_SG_LIST) : sizeof(IPS_STD_SG_LIST))
- #if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,4)
- #define pci_set_dma_mask(dev,mask) ( mask > 0xffffffff ? 1:0 )
- #define scsi_set_pci_device(sh,dev) (0)
- #endif
- #if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-
- #ifndef irqreturn_t
- typedef void irqreturn_t;
- #endif
-
- #define IRQ_NONE
- #define IRQ_HANDLED
- #define IRQ_RETVAL(x)
- #define IPS_REGISTER_HOSTS(SHT) scsi_register_module(MODULE_SCSI_HA,SHT)
- #define IPS_UNREGISTER_HOSTS(SHT) scsi_unregister_module(MODULE_SCSI_HA,SHT)
- #define IPS_ADD_HOST(shost,device)
- #define IPS_REMOVE_HOST(shost)
- #define IPS_SCSI_SET_DEVICE(sh,ha) scsi_set_pci_device(sh, (ha)->pcidev)
- #define IPS_PRINTK(level, pcidev, format, arg...) \
- printk(level "%s %s:" format , "ips" , \
- (pcidev)->slot_name , ## arg)
- #define scsi_host_alloc(sh,size) scsi_register(sh,size)
- #define scsi_host_put(sh) scsi_unregister(sh)
- #else
#define IPS_REGISTER_HOSTS(SHT) (!ips_detect(SHT))
#define IPS_UNREGISTER_HOSTS(SHT)
#define IPS_ADD_HOST(shost,device) do { scsi_add_host(shost,device); scsi_scan_host(shost); } while (0)
@@ -114,7 +88,6 @@
#define IPS_SCSI_SET_DEVICE(sh,ha) do { } while (0)
#define IPS_PRINTK(level, pcidev, format, arg...) \
dev_printk(level , &((pcidev)->dev) , format , ## arg)
- #endif
#ifndef MDELAY
#define MDELAY mdelay
@@ -444,16 +417,10 @@
/*
* Scsi_Host Template
*/
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- static int ips_proc24_info(char *, char **, off_t, int, int, int);
- static void ips_select_queue_depth(struct Scsi_Host *, Scsi_Device *);
- static int ips_biosparam(Disk *disk, kdev_t dev, int geom[]);
-#else
static int ips_proc_info(struct Scsi_Host *, char *, char **, off_t, int, int);
static int ips_biosparam(struct scsi_device *sdev, struct block_device *bdev,
sector_t capacity, int geom[]);
static int ips_slave_configure(Scsi_Device *SDptr);
-#endif
/*
* Raid Command Formats
diff -puN drivers/scsi/megaraid/mega_common.h~remove-linux-versionh-from-drivers-scsi drivers/scsi/megaraid/mega_common.h
--- devel/drivers/scsi/megaraid/mega_common.h~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/megaraid/mega_common.h 2005-07-26 00:39:01.000000000 -0700
@@ -25,7 +25,6 @@
#include <linux/delay.h>
#include <linux/blkdev.h>
#include <linux/list.h>
-#include <linux/version.h>
#include <linux/moduleparam.h>
#include <linux/dma-mapping.h>
#include <asm/semaphore.h>
diff -puN drivers/scsi/megaraid/megaraid_mm.h~remove-linux-versionh-from-drivers-scsi drivers/scsi/megaraid/megaraid_mm.h
--- devel/drivers/scsi/megaraid/megaraid_mm.h~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/megaraid/megaraid_mm.h 2005-07-26 00:39:01.000000000 -0700
@@ -18,7 +18,6 @@
#include <linux/spinlock.h>
#include <linux/fs.h>
#include <asm/uaccess.h>
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/pci.h>
diff -puN drivers/scsi/mvme147.c~remove-linux-versionh-from-drivers-scsi drivers/scsi/mvme147.c
--- devel/drivers/scsi/mvme147.c~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/mvme147.c 2005-07-26 00:39:01.000000000 -0700
@@ -2,7 +2,6 @@
#include <linux/mm.h>
#include <linux/blkdev.h>
#include <linux/sched.h>
-#include <linux/version.h>
#include <linux/interrupt.h>
#include <asm/page.h>
diff -puN drivers/scsi/mvme16x.c~remove-linux-versionh-from-drivers-scsi drivers/scsi/mvme16x.c
--- devel/drivers/scsi/mvme16x.c~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/mvme16x.c 2005-07-26 00:39:01.000000000 -0700
@@ -7,7 +7,6 @@
#include <linux/mm.h>
#include <linux/blkdev.h>
#include <linux/sched.h>
-#include <linux/version.h>
#include <asm/page.h>
#include <asm/pgtable.h>
diff -L drivers/scsi/pci2000.h -puN drivers/scsi/pci2000.h~remove-linux-versionh-from-drivers-scsi /dev/null
--- devel/drivers/scsi/pci2000.h
+++ /dev/null 2003-09-15 06:40:47.000000000 -0700
@@ -1,200 +0,0 @@
-/****************************************************************************
- * Perceptive Solutions, Inc. PCI-2000 device driver for Linux.
- *
- * pci2000.h - Linux Host Driver for PCI-2000 IntelliCache SCSI Adapters
- *
- * Copyright (c) 1997-1999 Perceptive Solutions, Inc.
- * All Rights Reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that redistributions of source
- * code retain the above copyright notice and this comment without
- * modification.
- *
- * Technical updates and product information at:
- * http://www.psidisk.com
- *
- * Please send questions, comments, bug reports to:
- * tech@psidisk.com Technical Support
- *
- ****************************************************************************/
-#ifndef _PCI2000_H
-#define _PCI2000_H
-
-#include <linux/types.h>
-
-#ifndef PSI_EIDE_SCSIOP
-#define PSI_EIDE_SCSIOP 1
-
-#ifndef LINUX_VERSION_CODE
-#include <linux/version.h>
-#endif
-#define LINUXVERSION(v,p,s) (((v)<<16) + ((p)<<8) + (s))
-
-/************************************************/
-/* definition of standard data types */
-/************************************************/
-#define CHAR char
-#define UCHAR unsigned char
-#define SHORT short
-#define USHORT unsigned short
-#define BOOL long
-#define LONG long
-#define ULONG unsigned long
-#define VOID void
-
-typedef CHAR *PCHAR;
-typedef UCHAR *PUCHAR;
-typedef SHORT *PSHORT;
-typedef USHORT *PUSHORT;
-typedef BOOL *PBOOL;
-typedef LONG *PLONG;
-typedef ULONG *PULONG;
-typedef VOID *PVOID;
-
-
-/************************************************/
-/* Misc. macros */
-/************************************************/
-#define ANY2SCSI(up, p) \
-((UCHAR *)up)[0] = (((ULONG)(p)) >> 8); \
-((UCHAR *)up)[1] = ((ULONG)(p));
-
-#define SCSI2LONG(up) \
-( (((long)*(((UCHAR *)up))) << 16) \
-+ (((long)(((UCHAR *)up)[1])) << 8) \
-+ ((long)(((UCHAR *)up)[2])) )
-
-#define XANY2SCSI(up, p) \
-((UCHAR *)up)[0] = ((long)(p)) >> 24; \
-((UCHAR *)up)[1] = ((long)(p)) >> 16; \
-((UCHAR *)up)[2] = ((long)(p)) >> 8; \
-((UCHAR *)up)[3] = ((long)(p));
-
-#define XSCSI2LONG(up) \
-( (((long)(((UCHAR *)up)[0])) << 24) \
-+ (((long)(((UCHAR *)up)[1])) << 16) \
-+ (((long)(((UCHAR *)up)[2])) << 8) \
-+ ((long)(((UCHAR *)up)[3])) )
-
-/************************************************/
-/* SCSI CDB operation codes */
-/************************************************/
-#define SCSIOP_TEST_UNIT_READY 0x00
-#define SCSIOP_REZERO_UNIT 0x01
-#define SCSIOP_REWIND 0x01
-#define SCSIOP_REQUEST_BLOCK_ADDR 0x02
-#define SCSIOP_REQUEST_SENSE 0x03
-#define SCSIOP_FORMAT_UNIT 0x04
-#define SCSIOP_READ_BLOCK_LIMITS 0x05
-#define SCSIOP_REASSIGN_BLOCKS 0x07
-#define SCSIOP_READ6 0x08
-#define SCSIOP_RECEIVE 0x08
-#define SCSIOP_WRITE6 0x0A
-#define SCSIOP_PRINT 0x0A
-#define SCSIOP_SEND 0x0A
-#define SCSIOP_SEEK6 0x0B
-#define SCSIOP_TRACK_SELECT 0x0B
-#define SCSIOP_SLEW_PRINT 0x0B
-#define SCSIOP_SEEK_BLOCK 0x0C
-#define SCSIOP_PARTITION 0x0D
-#define SCSIOP_READ_REVERSE 0x0F
-#define SCSIOP_WRITE_FILEMARKS 0x10
-#define SCSIOP_FLUSH_BUFFER 0x10
-#define SCSIOP_SPACE 0x11
-#define SCSIOP_INQUIRY 0x12
-#define SCSIOP_VERIFY6 0x13
-#define SCSIOP_RECOVER_BUF_DATA 0x14
-#define SCSIOP_MODE_SELECT 0x15
-#define SCSIOP_RESERVE_UNIT 0x16
-#define SCSIOP_RELEASE_UNIT 0x17
-#define SCSIOP_COPY 0x18
-#define SCSIOP_ERASE 0x19
-#define SCSIOP_MODE_SENSE 0x1A
-#define SCSIOP_START_STOP_UNIT 0x1B
-#define SCSIOP_STOP_PRINT 0x1B
-#define SCSIOP_LOAD_UNLOAD 0x1B
-#define SCSIOP_RECEIVE_DIAGNOSTIC 0x1C
-#define SCSIOP_SEND_DIAGNOSTIC 0x1D
-#define SCSIOP_MEDIUM_REMOVAL 0x1E
-#define SCSIOP_READ_CAPACITY 0x25
-#define SCSIOP_READ 0x28
-#define SCSIOP_WRITE 0x2A
-#define SCSIOP_SEEK 0x2B
-#define SCSIOP_LOCATE 0x2B
-#define SCSIOP_WRITE_VERIFY 0x2E
-#define SCSIOP_VERIFY 0x2F
-#define SCSIOP_SEARCH_DATA_HIGH 0x30
-#define SCSIOP_SEARCH_DATA_EQUAL 0x31
-#define SCSIOP_SEARCH_DATA_LOW 0x32
-#define SCSIOP_SET_LIMITS 0x33
-#define SCSIOP_READ_POSITION 0x34
-#define SCSIOP_SYNCHRONIZE_CACHE 0x35
-#define SCSIOP_COMPARE 0x39
-#define SCSIOP_COPY_COMPARE 0x3A
-#define SCSIOP_WRITE_DATA_BUFF 0x3B
-#define SCSIOP_READ_DATA_BUFF 0x3C
-#define SCSIOP_CHANGE_DEFINITION 0x40
-#define SCSIOP_READ_SUB_CHANNEL 0x42
-#define SCSIOP_READ_TOC 0x43
-#define SCSIOP_READ_HEADER 0x44
-#define SCSIOP_PLAY_AUDIO 0x45
-#define SCSIOP_PLAY_AUDIO_MSF 0x47
-#define SCSIOP_PLAY_TRACK_INDEX 0x48
-#define SCSIOP_PLAY_TRACK_RELATIVE 0x49
-#define SCSIOP_PAUSE_RESUME 0x4B
-#define SCSIOP_LOG_SELECT 0x4C
-#define SCSIOP_LOG_SENSE 0x4D
-#define SCSIOP_MODE_SELECT10 0x55
-#define SCSIOP_MODE_SENSE10 0x5A
-#define SCSIOP_LOAD_UNLOAD_SLOT 0xA6
-#define SCSIOP_MECHANISM_STATUS 0xBD
-#define SCSIOP_READ_CD 0xBE
-
-// SCSI read capacity structure
-typedef struct _READ_CAPACITY_DATA
- {
- ULONG blks; /* total blocks (converted to little endian) */
- ULONG blksiz; /* size of each (converted to little endian) */
- } READ_CAPACITY_DATA, *PREAD_CAPACITY_DATA;
-
-// SCSI inquiry data
-typedef struct _INQUIRYDATA
- {
- UCHAR DeviceType :5;
- UCHAR DeviceTypeQualifier :3;
- UCHAR DeviceTypeModifier :7;
- UCHAR RemovableMedia :1;
- UCHAR Versions;
- UCHAR ResponseDataFormat;
- UCHAR AdditionalLength;
- UCHAR Reserved[2];
- UCHAR SoftReset :1;
- UCHAR CommandQueue :1;
- UCHAR Reserved2 :1;
- UCHAR LinkedCommands :1;
- UCHAR Synchronous :1;
- UCHAR Wide16Bit :1;
- UCHAR Wide32Bit :1;
- UCHAR RelativeAddressing :1;
- UCHAR VendorId[8];
- UCHAR ProductId[16];
- UCHAR ProductRevisionLevel[4];
- UCHAR VendorSpecific[20];
- UCHAR Reserved3[40];
- } INQUIRYDATA, *PINQUIRYDATA;
-
-#endif
-
-// function prototypes
-int Pci2000_Detect (Scsi_Host_Template *tpnt);
-int Pci2000_Command (Scsi_Cmnd *SCpnt);
-int Pci2000_QueueCommand (Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *));
-int Pci2000_Abort (Scsi_Cmnd *SCpnt);
-int Pci2000_Reset (Scsi_Cmnd *SCpnt, unsigned int flags);
-int Pci2000_Release (struct Scsi_Host *pshost);
-int Pci2000_BiosParam (struct scsi_device *sdev,
- struct block_device *bdev,
- sector_t capacity, int geom[]);
-
-#endif
diff -puN drivers/scsi/pcmcia/nsp_cs.c~remove-linux-versionh-from-drivers-scsi drivers/scsi/pcmcia/nsp_cs.c
--- devel/drivers/scsi/pcmcia/nsp_cs.c~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/pcmcia/nsp_cs.c 2005-07-26 00:39:01.000000000 -0700
@@ -27,7 +27,6 @@
/* $Id: nsp_cs.c,v 1.23 2003/08/18 11:09:19 elca Exp $ */
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -85,10 +84,6 @@ static Scsi_Host_Template nsp_driver_tem
.proc_name = "nsp_cs",
.proc_info = nsp_proc_info,
.name = "WorkBit NinjaSCSI-3/32Bi(16bit)",
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
- .detect = nsp_detect_old,
- .release = nsp_release_old,
-#endif
.info = nsp_info,
.queuecommand = nsp_queuecommand,
/* .eh_abort_handler = nsp_eh_abort,*/
@@ -99,9 +94,6 @@ static Scsi_Host_Template nsp_driver_tem
.sg_tablesize = SG_ALL,
.cmd_per_lun = 1,
.use_clustering = DISABLE_CLUSTERING,
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,2))
- .use_new_eh_code = 1,
-#endif
};
static dev_link_t *dev_list = NULL;
@@ -1316,11 +1308,7 @@ static struct Scsi_Host *nsp_detect(Scsi
nsp_hw_data *data_b = &nsp_data_base, *data;
nsp_dbg(NSP_DEBUG_INIT, "this_id=%d", sht->this_id);
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
host = scsi_host_alloc(&nsp_driver_template, sizeof(nsp_hw_data));
-#else
- host = scsi_register(sht, sizeof(nsp_hw_data));
-#endif
if (host == NULL) {
nsp_dbg(NSP_DEBUG_INIT, "host failed");
return NULL;
@@ -1357,37 +1345,6 @@ static struct Scsi_Host *nsp_detect(Scsi
return host; /* detect done. */
}
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
-static int nsp_detect_old(Scsi_Host_Template *sht)
-{
- if (nsp_detect(sht) == NULL) {
- return 0;
- } else {
- //MOD_INC_USE_COUNT;
- return 1;
- }
-}
-
-
-static int nsp_release_old(struct Scsi_Host *shpnt)
-{
- //nsp_hw_data *data = (nsp_hw_data *)shpnt->hostdata;
-
- /* PCMCIA Card Service dose same things below. */
- /* So we do nothing. */
- //if (shpnt->irq) {
- // free_irq(shpnt->irq, data->ScsiInfo);
- //}
- //if (shpnt->io_port) {
- // release_region(shpnt->io_port, shpnt->n_io_port);
- //}
-
- //MOD_DEC_USE_COUNT;
-
- return 0;
-}
-#endif
-
/*----------------------------------------------------------------*/
/* return info string */
/*----------------------------------------------------------------*/
@@ -1408,16 +1365,11 @@ static const char *nsp_info(struct Scsi_
} while(0)
static int
nsp_proc_info(
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
struct Scsi_Host *host,
-#endif
char *buffer,
char **start,
off_t offset,
int length,
-#if !(LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
- int hostno,
-#endif
int inout)
{
int id;
@@ -1426,24 +1378,12 @@ nsp_proc_info(
int speed;
unsigned long flags;
nsp_hw_data *data;
-#if !(LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
- struct Scsi_Host *host;
-#else
int hostno;
-#endif
if (inout) {
return -EINVAL;
}
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
hostno = host->host_no;
-#else
- /* search this HBA host */
- host = scsi_host_hn_get(hostno);
- if (host == NULL) {
- return -ESRCH;
- }
-#endif
data = (nsp_hw_data *)host->hostdata;
@@ -1716,10 +1656,6 @@ static void nsp_cs_config(dev_link_t *li
cistpl_cftable_entry_t dflt = { 0 };
struct Scsi_Host *host;
nsp_hw_data *data = &nsp_data_base;
-#if !(LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,74))
- Scsi_Device *dev;
- dev_node_t **tail, *node;
-#endif
nsp_dbg(NSP_DEBUG_INIT, "in");
@@ -1865,17 +1801,7 @@ static void nsp_cs_config(dev_link_t *li
goto cs_failed;
}
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,2))
host = nsp_detect(&nsp_driver_template);
-#else
- scsi_register_host(&nsp_driver_template);
- for (host = scsi_host_get_next(NULL); host != NULL;
- host = scsi_host_get_next(host)) {
- if (host->hostt == &nsp_driver_template) {
- break;
- }
- }
-#endif
if (host == NULL) {
nsp_dbg(NSP_DEBUG_INIT, "detect failed");
@@ -1883,7 +1809,6 @@ static void nsp_cs_config(dev_link_t *li
}
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,74))
scsi_add_host (host, NULL);
scsi_scan_host(host);
@@ -1891,52 +1816,6 @@ static void nsp_cs_config(dev_link_t *li
link->dev = &info->node;
info->host = host;
-#else
- nsp_dbg(NSP_DEBUG_INIT, "GET_SCSI_INFO");
- tail = &link->dev;
- info->ndev = 0;
-
- nsp_dbg(NSP_DEBUG_INIT, "host=0x%p", host);
-
- for (dev = host->host_queue; dev != NULL; dev = dev->next) {
- unsigned long id;
- id = (dev->id & 0x0f) + ((dev->lun & 0x0f) << 4) +
- ((dev->channel & 0x0f) << 8) +
- ((dev->host->host_no & 0x0f) << 12);
- node = &info->node[info->ndev];
- node->minor = 0;
- switch (dev->type) {
- case TYPE_TAPE:
- node->major = SCSI_TAPE_MAJOR;
- snprintf(node->dev_name, sizeof(node->dev_name), "st#%04lx", id);
- break;
- case TYPE_DISK:
- case TYPE_MOD:
- node->major = SCSI_DISK0_MAJOR;
- snprintf(node->dev_name, sizeof(node->dev_name), "sd#%04lx", id);
- break;
- case TYPE_ROM:
- case TYPE_WORM:
- node->major = SCSI_CDROM_MAJOR;
- snprintf(node->dev_name, sizeof(node->dev_name), "sr#%04lx", id);
- break;
- default:
- node->major = SCSI_GENERIC_MAJOR;
- snprintf(node->dev_name, sizeof(node->dev_name), "sg#%04lx", id);
- break;
- }
- *tail = node; tail = &node->next;
- info->ndev++;
- info->host = dev->host;
- }
-
- *tail = NULL;
- if (info->ndev == 0) {
- nsp_msg(KERN_INFO, "no SCSI devices found");
- }
- nsp_dbg(NSP_DEBUG_INIT, "host=0x%p", host);
-#endif
-
/* Finally, report what we've done */
printk(KERN_INFO "nsp_cs: index 0x%02x: Vcc %d.%d",
link->conf.ConfigIndex,
@@ -1991,13 +1870,9 @@ static void nsp_cs_release(dev_link_t *l
nsp_dbg(NSP_DEBUG_INIT, "link=0x%p", link);
/* Unlink the device chain */
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,2))
if (info->host != NULL) {
scsi_remove_host(info->host);
}
-#else
- scsi_unregister_host(&nsp_driver_template);
-#endif
link->dev = NULL;
if (link->win) {
@@ -2014,11 +1889,9 @@ static void nsp_cs_release(dev_link_t *l
pcmcia_release_irq(link->handle, &link->irq);
}
link->state &= ~DEV_CONFIG;
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,2))
if (info->host != NULL) {
scsi_host_put(info->host);
}
-#endif
} /* nsp_cs_release */
/*======================================================================
@@ -2057,9 +1930,6 @@ static int nsp_cs_event(event_t
case CS_EVENT_CARD_INSERTION:
nsp_dbg(NSP_DEBUG_INIT, "event: insert");
link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,68))
- info->bus = args->bus;
-#endif
nsp_cs_config(link);
break;
@@ -2118,7 +1988,6 @@ static int nsp_cs_event(event_t
/*======================================================================*
* module entry point
*====================================================================*/
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,68))
static struct pcmcia_device_id nsp_cs_ids[] = {
PCMCIA_DEVICE_PROD_ID123("IO DATA", "CBSC16 ", "1", 0x547e66dc, 0x0d63a3fd, 0x51de003a),
PCMCIA_DEVICE_PROD_ID123("KME ", "SCSI-CARD-001", "1", 0x534c02bc, 0x52008408, 0x51de003a),
@@ -2141,47 +2010,20 @@ static struct pcmcia_driver nsp_driver =
.detach = nsp_cs_detach,
.id_table = nsp_cs_ids,
};
-#endif
static int __init nsp_cs_init(void)
{
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,68))
nsp_msg(KERN_INFO, "loading...");
return pcmcia_register_driver(&nsp_driver);
-#else
- servinfo_t serv;
-
- nsp_msg(KERN_INFO, "loading...");
- pcmcia_get_card_services_info(&serv);
- if (serv.Revision != CS_RELEASE_CODE) {
- nsp_msg(KERN_DEBUG, "Card Services release does not match!");
- return -EINVAL;
- }
- register_pcmcia_driver(&dev_info, &nsp_cs_attach, &nsp_cs_detach);
-
- nsp_dbg(NSP_DEBUG_INIT, "out");
- return 0;
-#endif
}
static void __exit nsp_cs_exit(void)
{
nsp_msg(KERN_INFO, "unloading...");
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,68))
pcmcia_unregister_driver(&nsp_driver);
BUG_ON(dev_list != NULL);
-#else
- unregister_pcmcia_driver(&dev_info);
- /* XXX: this really needs to move into generic code.. */
- while (dev_list != NULL) {
- if (dev_list->state & DEV_CONFIG) {
- nsp_cs_release(dev_list);
- }
- nsp_cs_detach(dev_list);
- }
-#endif
}
diff -puN drivers/scsi/pcmcia/nsp_cs.h~remove-linux-versionh-from-drivers-scsi drivers/scsi/pcmcia/nsp_cs.h
--- devel/drivers/scsi/pcmcia/nsp_cs.h~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/pcmcia/nsp_cs.h 2005-07-26 00:39:01.000000000 -0700
@@ -227,13 +227,7 @@
typedef struct scsi_info_t {
dev_link_t link;
struct Scsi_Host *host;
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,74))
dev_node_t node;
-#else
- int ndev;
- dev_node_t node[8];
- struct bus_operations *bus;
-#endif
int stop;
} scsi_info_t;
@@ -304,22 +298,13 @@ static int nsp_cs_event (event_
/* Linux SCSI subsystem specific functions */
static struct Scsi_Host *nsp_detect (Scsi_Host_Template *sht);
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
-static int nsp_detect_old (Scsi_Host_Template *sht);
-static int nsp_release_old(struct Scsi_Host *shpnt);
-#endif
static const char *nsp_info (struct Scsi_Host *shpnt);
static int nsp_proc_info (
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
struct Scsi_Host *host,
-#endif
char *buffer,
char **start,
off_t offset,
int length,
-#if !(LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
- int hostno,
-#endif
int inout);
static int nsp_queuecommand(Scsi_Cmnd *SCpnt, void (* done)(Scsi_Cmnd *SCpnt));
@@ -412,61 +397,8 @@ enum _burst_mode {
#define MSG_EXT_SDTR 0x01
-/**************************************************************************
- * Compatibility functions
- */
-
-/* for Kernel 2.4 */
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
-# define scsi_register_host(template) scsi_register_module(MODULE_SCSI_HA, template)
-# define scsi_unregister_host(template) scsi_unregister_module(MODULE_SCSI_HA, template)
-# define scsi_host_put(host) scsi_unregister(host)
-
-typedef void irqreturn_t;
-# define IRQ_NONE /* */
-# define IRQ_HANDLED /* */
-# define IRQ_RETVAL(x) /* */
-
-/* This is ad-hoc version of scsi_host_get_next() */
-static inline struct Scsi_Host *scsi_host_get_next(struct Scsi_Host *host)
-{
- if (host == NULL) {
- return scsi_hostlist;
- } else {
- return host->next;
- }
-}
-
-/* This is ad-hoc version of scsi_host_hn_get() */
-static inline struct Scsi_Host *scsi_host_hn_get(unsigned short hostno)
-{
- struct Scsi_Host *host;
-
- for (host = scsi_host_get_next(NULL); host != NULL;
- host = scsi_host_get_next(host)) {
- if (host->host_no == hostno) {
- break;
- }
- }
-
- return host;
-}
-
-static void cs_error(client_handle_t handle, int func, int ret)
-{
- error_info_t err = { func, ret };
- pcmcia_report_error(handle, &err);
-}
-
-/* scatter-gather table */
-# define BUFFER_ADDR (SCpnt->SCp.buffer->address)
-#endif
-
-/* for Kernel 2.6 */
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
/* scatter-gather table */
# define BUFFER_ADDR ((char *)((unsigned int)(SCpnt->SCp.buffer->page) + SCpnt->SCp.buffer->offset))
-#endif
#endif /*__nsp_cs__*/
/* end */
diff -puN drivers/scsi/qla1280.c~remove-linux-versionh-from-drivers-scsi drivers/scsi/qla1280.c
--- devel/drivers/scsi/qla1280.c~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/qla1280.c 2005-07-26 00:39:01.000000000 -0700
@@ -332,7 +332,6 @@
#include <linux/config.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/errno.h>
@@ -356,28 +355,16 @@
#include <asm/types.h>
#include <asm/system.h>
-#if LINUX_VERSION_CODE >= 0x020545
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
-#else
-#include <linux/blk.h>
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "sd.h"
-#endif
#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
#include <asm/sn/io.h>
#endif
-#if LINUX_VERSION_CODE < 0x020407
-#error "Kernels older than 2.4.7 are no longer supported"
-#endif
-
-
/*
* Compile time Options:
* 0 - Disable and 1 - Enable
@@ -441,52 +428,8 @@
#define NVRAM_DELAY() udelay(500) /* 2 microseconds */
-#if LINUX_VERSION_CODE < 0x020500
-#define HOST_LOCK &io_request_lock
-#define irqreturn_t void
-#define IRQ_RETVAL(foo)
-#define MSG_ORDERED_TAG 1
-
-#define DMA_BIDIRECTIONAL SCSI_DATA_UNKNOWN
-#define DMA_TO_DEVICE SCSI_DATA_WRITE
-#define DMA_FROM_DEVICE SCSI_DATA_READ
-#define DMA_NONE SCSI_DATA_NONE
-
-#ifndef HAVE_SECTOR_T
-typedef unsigned int sector_t;
-#endif
-
-static inline void
-scsi_adjust_queue_depth(struct scsi_device *device, int tag, int depth)
-{
- if (tag) {
- device->tagged_queue = tag;
- device->current_tag = 0;
- }
- device->queue_depth = depth;
-}
-static inline struct Scsi_Host *scsi_host_alloc(Scsi_Host_Template *t, size_t s)
-{
- return scsi_register(t, s);
-}
-static inline void scsi_host_put(struct Scsi_Host *h)
-{
- scsi_unregister(h);
-}
-#else
#define HOST_LOCK ha->host->host_lock
-#endif
-#if LINUX_VERSION_CODE < 0x020600
-#define DEV_SIMPLE_TAGS(device) device->tagged_queue
-/*
- * Hack around that qla1280_remove_one is called from
- * qla1280_release in 2.4
- */
-#undef __devexit
-#define __devexit
-#else
#define DEV_SIMPLE_TAGS(device) device->simple_tags
-#endif
#if defined(__ia64__) && !defined(ia64_platform_is)
#define ia64_platform_is(foo) (!strcmp(x, platform_name))
#endif
@@ -506,9 +449,6 @@ static void qla1280_remove_one(struct pc
* QLogic Driver Support Function Prototypes.
*/
static void qla1280_done(struct scsi_qla_host *);
-#if LINUX_VERSION_CODE < 0x020545
-static void qla1280_get_target_options(struct scsi_cmnd *, struct scsi_qla_host *);
-#endif
static int qla1280_get_token(char *);
static int qla1280_setup(char *s) __init;
@@ -610,11 +550,7 @@ __setup("qla1280=", qla1280_setup);
#define CMD_SNSLEN(Cmnd) sizeof(Cmnd->sense_buffer)
#define CMD_RESULT(Cmnd) Cmnd->result
#define CMD_HANDLE(Cmnd) Cmnd->host_scribble
-#if LINUX_VERSION_CODE < 0x020545
-#define CMD_REQUEST(Cmnd) Cmnd->request.cmd
-#else
#define CMD_REQUEST(Cmnd) Cmnd->request->cmd
-#endif
#define CMD_HOST(Cmnd) Cmnd->device->host
#define SCSI_BUS_32(Cmnd) Cmnd->device->channel
@@ -1179,97 +1115,6 @@ qla1280_biosparam(struct scsi_device *sd
return 0;
}
-#if LINUX_VERSION_CODE < 0x020600
-static int
-qla1280_detect(Scsi_Host_Template *template)
-{
- struct pci_device_id *id = &qla1280_pci_tbl[0];
- struct pci_dev *pdev = NULL;
- int num_hosts = 0;
-
- if (sizeof(struct srb) > sizeof(Scsi_Pointer)) {
- printk(KERN_WARNING
- "qla1280: struct srb too big, aborting\n");
- return 0;
- }
-
- if ((DMA_BIDIRECTIONAL != PCI_DMA_BIDIRECTIONAL) ||
- (DMA_TO_DEVICE != PCI_DMA_TODEVICE) ||
- (DMA_FROM_DEVICE != PCI_DMA_FROMDEVICE) ||
- (DMA_NONE != PCI_DMA_NONE)) {
- printk(KERN_WARNING
- "qla1280: dma direction bits don't match\n");
- return 0;
- }
-
-#ifdef MODULE
- /*
- * If we are called as a module, the qla1280 pointer may not be null
- * and it would point to our bootup string, just like on the lilo
- * command line. IF not NULL, then process this config string with
- * qla1280_setup
- *
- * Boot time Options
- * To add options at boot time add a line to your lilo.conf file like:
- * append="qla1280=verbose,max_tags:{{255,255,255,255},{255,255,255,255}}"
- * which will result in the first four devices on the first two
- * controllers being set to a tagged queue depth of 32.
- */
- if (qla1280)
- qla1280_setup(qla1280);
-#endif
-
- /* First Initialize QLA12160 on PCI Bus 1 Dev 2 */
- while ((pdev = pci_find_device(id->vendor, id->device, pdev))) {
- if (pdev->bus->number == 1 && PCI_SLOT(pdev->devfn) == 2) {
- if (!qla1280_probe_one(pdev, id))
- num_hosts++;
- }
- }
-
- pdev = NULL;
- /* Try and find each different type of adapter we support */
- for (id = &qla1280_pci_tbl[0]; id->device; id++) {
- while ((pdev = pci_find_device(id->vendor, id->device, pdev))) {
- /*
- * skip QLA12160 already initialized on
- * PCI Bus 1 Dev 2 since we already initialized
- * and presented it
- */
- if (id->device == PCI_DEVICE_ID_QLOGIC_ISP12160 &&
- pdev->bus->number == 1 &&
- PCI_SLOT(pdev->devfn) == 2)
- continue;
-
- if (!qla1280_probe_one(pdev, id))
- num_hosts++;
- }
- }
-
- return num_hosts;
-}
-
-/*
- * This looks a bit ugly as we could just pass down host to
- * qla1280_remove_one, but I want to keep qla1280_release purely a wrapper
- * around pci_driver::remove as used from 2.6 onwards.
- */
-static int
-qla1280_release(struct Scsi_Host *host)
-{
- struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
-
- qla1280_remove_one(ha->pdev);
- return 0;
-}
-
-static int
-qla1280_biosparam_old(Disk * disk, kdev_t dev, int geom[])
-{
- return qla1280_biosparam(disk->device, NULL, disk->capacity, geom);
-}
-#endif
-
/**************************************************************************
* qla1280_intr_handler
* Handles the H/W interrupt
@@ -1388,11 +1233,9 @@ qla1280_slave_configure(struct scsi_devi
scsi_adjust_queue_depth(device, 0, default_depth);
}
-#if LINUX_VERSION_CODE > 0x020500
nv->bus[bus].target[target].parameter.f.enable_sync = device->sdtr;
nv->bus[bus].target[target].parameter.f.enable_wide = device->wdtr;
nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = device->ppr;
-#endif
if (driver_setup.no_sync ||
(driver_setup.sync_mask &&
@@ -1417,31 +1260,6 @@ qla1280_slave_configure(struct scsi_devi
return status;
}
-#if LINUX_VERSION_CODE < 0x020545
-/**************************************************************************
- * qla1280_select_queue_depth
- *
- * Sets the queue depth for each SCSI device hanging off the input
- * host adapter. We use a queue depth of 2 for devices that do not
- * support tagged queueing.
- **************************************************************************/
-static void
-qla1280_select_queue_depth(struct Scsi_Host *host, struct scsi_device *sdev_q)
-{
- struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
- struct scsi_device *sdev;
-
- ENTER("qla1280_select_queue_depth");
- for (sdev = sdev_q; sdev; sdev = sdev->next)
- if (sdev->host == host)
- qla1280_slave_configure(sdev);
-
- if (sdev_q)
- qla1280_check_for_dead_scsi_bus(ha, sdev_q->channel);
- LEAVE("qla1280_select_queue_depth");
-}
-#endif
-
/*
* qla1280_done
* Process completed commands.
@@ -1501,10 +1319,6 @@ qla1280_done(struct scsi_qla_host *ha)
CMD_HANDLE(sp->cmd) = (unsigned char *)INVALID_HANDLE;
ha->actthreads--;
-#if LINUX_VERSION_CODE < 0x020500
- if (cmd->cmnd[0] == INQUIRY)
- qla1280_get_target_options(cmd, ha);
-#endif
(*(cmd)->scsi_done)(cmd);
if(sp->wait != NULL)
@@ -1667,9 +1481,7 @@ qla1280_initialize_adapter(struct scsi_q
struct device_reg __iomem *reg;
int status;
int bus;
-#if LINUX_VERSION_CODE > 0x020500
unsigned long flags;
-#endif
ENTER("qla1280_initialize_adapter");
@@ -1708,7 +1520,6 @@ qla1280_initialize_adapter(struct scsi_q
"NVRAM\n");
}
-#if LINUX_VERSION_CODE >= 0x020500
/*
* It's necessary to grab the spin here as qla1280_mailbox_command
* needs to be able to drop the lock unconditionally to wait
@@ -1716,7 +1527,6 @@ qla1280_initialize_adapter(struct scsi_q
* In 2.4 ->detect is called with the io_request_lock held.
*/
spin_lock_irqsave(HOST_LOCK, flags);
-#endif
status = qla1280_load_firmware(ha);
if (status) {
@@ -1748,9 +1558,7 @@ qla1280_initialize_adapter(struct scsi_q
ha->flags.online = 1;
out:
-#if LINUX_VERSION_CODE >= 0x020500
spin_unlock_irqrestore(HOST_LOCK, flags);
-#endif
if (status)
dprintk(2, "qla1280_initialize_adapter: **** FAILED ****\n");
@@ -3967,51 +3775,6 @@ qla1280_rst_aen(struct scsi_qla_host *ha
LEAVE("qla1280_rst_aen");
}
-
-#if LINUX_VERSION_CODE < 0x020500
-/*
- *
- */
-static void
-qla1280_get_target_options(struct scsi_cmnd *cmd, struct scsi_qla_host *ha)
-{
- unsigned char *result;
- struct nvram *n;
- int bus, target, lun;
-
- bus = SCSI_BUS_32(cmd);
- target = SCSI_TCN_32(cmd);
- lun = SCSI_LUN_32(cmd);
-
- /*
- * Make sure to not touch anything if someone is using the
- * sg interface.
- */
- if (cmd->use_sg || (CMD_RESULT(cmd) >> 16) != DID_OK || lun)
- return;
-
- result = cmd->request_buffer;
- n = &ha->nvram;
-
- n->bus[bus].target[target].parameter.f.enable_wide = 0;
- n->bus[bus].target[target].parameter.f.enable_sync = 0;
- n->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 0;
-
- if (result[7] & 0x60)
- n->bus[bus].target[target].parameter.f.enable_wide = 1;
- if (result[7] & 0x10)
- n->bus[bus].target[target].parameter.f.enable_sync = 1;
- if ((result[2] >= 3) && (result[4] + 5 > 56) &&
- (result[56] & 0x4))
- n->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 1;
-
- dprintk(2, "get_target_options(): wide %i, sync %i, ppr %i\n",
- n->bus[bus].target[target].parameter.f.enable_wide,
- n->bus[bus].target[target].parameter.f.enable_sync,
- n->bus[bus].target[target].ppr_1x160.flags.enable_ppr);
-}
-#endif
-
/*
* qla1280_status_entry
* Processes received ISP status entry.
@@ -4564,7 +4327,6 @@ qla1280_get_token(char *str)
return ret;
}
-#if LINUX_VERSION_CODE >= 0x020600
static struct scsi_host_template qla1280_driver_template = {
.module = THIS_MODULE,
.proc_name = "qla1280",
@@ -4583,27 +4345,6 @@ static struct scsi_host_template qla1280
.cmd_per_lun = 1,
.use_clustering = ENABLE_CLUSTERING,
};
-#else
-static Scsi_Host_Template qla1280_driver_template = {
- .proc_name = "qla1280",
- .name = "Qlogic ISP 1280/12160",
- .detect = qla1280_detect,
- .release = qla1280_release,
- .info = qla1280_info,
- .queuecommand = qla1280_queuecommand,
- .eh_abort_handler = qla1280_eh_abort,
- .eh_device_reset_handler= qla1280_eh_device_reset,
- .eh_bus_reset_handler = qla1280_eh_bus_reset,
- .eh_host_reset_handler = qla1280_eh_adapter_reset,
- .bios_param = qla1280_biosparam_old,
- .can_queue = 0xfffff,
- .this_id = -1,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 1,
- .use_clustering = ENABLE_CLUSTERING,
- .use_new_eh_code = 1,
-};
-#endif
static int __devinit
qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
@@ -4694,10 +4435,6 @@ qla1280_probe_one(struct pci_dev *pdev,
host->max_sectors = 1024;
host->unique_id = host->host_no;
-#if LINUX_VERSION_CODE < 0x020545
- host->select_queue_depths = qla1280_select_queue_depth;
-#endif
-
error = -ENODEV;
#if MEMORY_MAPPED_IO
@@ -4745,21 +4482,15 @@ qla1280_probe_one(struct pci_dev *pdev,
pci_set_drvdata(pdev, host);
-#if LINUX_VERSION_CODE >= 0x020600
error = scsi_add_host(host, &pdev->dev);
if (error)
goto error_disable_adapter;
scsi_scan_host(host);
-#else
- scsi_set_pci_device(host, pdev);
-#endif
return 0;
-#if LINUX_VERSION_CODE >= 0x020600
error_disable_adapter:
WRT_REG_WORD(&ha->iobase->ictrl, 0);
-#endif
error_free_irq:
free_irq(pdev->irq, ha);
error_release_region:
@@ -4791,9 +4522,7 @@ qla1280_remove_one(struct pci_dev *pdev)
struct Scsi_Host *host = pci_get_drvdata(pdev);
struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
-#if LINUX_VERSION_CODE >= 0x020600
scsi_remove_host(host);
-#endif
WRT_REG_WORD(&ha->iobase->ictrl, 0);
@@ -4817,7 +4546,6 @@ qla1280_remove_one(struct pci_dev *pdev)
scsi_host_put(host);
}
-#if LINUX_VERSION_CODE >= 0x020600
static struct pci_driver qla1280_pci_driver = {
.name = "qla1280",
.id_table = qla1280_pci_tbl,
@@ -4863,11 +4591,6 @@ qla1280_exit(void)
module_init(qla1280_init);
module_exit(qla1280_exit);
-#else
-# define driver_template qla1280_driver_template
-# include "scsi_module.c"
-#endif
-
MODULE_AUTHOR("Qlogic & Jes Sorensen");
MODULE_DESCRIPTION("Qlogic ISP SCSI (qla1x80/qla1x160) driver");
MODULE_LICENSE("GPL");
diff -puN drivers/scsi/scsi_debug.c~remove-linux-versionh-from-drivers-scsi drivers/scsi/scsi_debug.c
--- devel/drivers/scsi/scsi_debug.c~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/scsi_debug.c 2005-07-26 00:39:01.000000000 -0700
@@ -48,10 +48,6 @@
#include <linux/stat.h>
-#ifndef LINUX_VERSION_CODE
-#include <linux/version.h>
-#endif
-
#include "scsi_logging.h"
#include "scsi_debug.h"
diff -puN drivers/scsi/sg.c~remove-linux-versionh-from-drivers-scsi drivers/scsi/sg.c
--- devel/drivers/scsi/sg.c~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/sg.c 2005-07-26 00:39:01.000000000 -0700
@@ -67,10 +67,6 @@ static int sg_proc_init(void);
static void sg_proc_cleanup(void);
#endif
-#ifndef LINUX_VERSION_CODE
-#include <linux/version.h>
-#endif /* LINUX_VERSION_CODE */
-
#define SG_ALLOW_DIO_DEF 0
#define SG_ALLOW_DIO_CODE /* compile out by commenting this define */
diff -puN drivers/scsi/sgiwd93.c~remove-linux-versionh-from-drivers-scsi drivers/scsi/sgiwd93.c
--- devel/drivers/scsi/sgiwd93.c~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/sgiwd93.c 2005-07-26 00:39:01.000000000 -0700
@@ -15,7 +15,6 @@
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/blkdev.h>
-#include <linux/version.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/spinlock.h>
diff -puN drivers/scsi/wd33c93.c~remove-linux-versionh-from-drivers-scsi drivers/scsi/wd33c93.c
--- devel/drivers/scsi/wd33c93.c~remove-linux-versionh-from-drivers-scsi 2005-07-26 00:39:01.000000000 -0700
+++ devel-akpm/drivers/scsi/wd33c93.c 2005-07-26 00:39:01.000000000 -0700
@@ -77,7 +77,6 @@
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/delay.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <asm/irq.h>
_