bk://gkernel.bkbits.net/libata-2.6
jgarzik@pobox.com|ChangeSet|20040729163340|32417 jgarzik
# This is a BitKeeper generated diff -Nru style patch.
#
# ChangeSet
# 2004/08/01 00:07:37-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# include/linux/pci_ids.h
# 2004/08/01 00:07:31-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/07/30 22:30:24-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# include/linux/pci_ids.h
# 2004/07/30 22:30:20-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/07/29 23:28:51-07:00 akpm@bix.(none)
# Merge bk://gkernel.bkbits.net/libata-2.6
# into bix.(none):/usr/src/bk-libata
#
# include/linux/ata.h
# 2004/07/29 23:28:47-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/libata-core.c
# 2004/07/29 23:28:47-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/pci/quirks.c
# 2004/07/29 23:28:47-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/07/29 23:27:47-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# include/linux/ata.h
# 2004/07/29 23:27:44-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/libata-core.c
# 2004/07/29 23:27:44-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/07/29 12:33:40-04:00 jgarzik@pobox.com
# Merge pobox.com:/spare/repo/linux-2.6
# into pobox.com:/spare/repo/libata-2.6
#
# include/linux/ata.h
# 2004/07/29 12:33:36-04:00 jgarzik@pobox.com +0 -0
# Auto merged
#
# drivers/scsi/libata-core.c
# 2004/07/29 12:33:36-04:00 jgarzik@pobox.com +0 -0
# Auto merged
#
# drivers/pci/quirks.c
# 2004/07/29 12:33:36-04:00 jgarzik@pobox.com +0 -0
# Auto merged
#
# ChangeSet
# 2004/07/26 22:52:19-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# drivers/scsi/Kconfig
# 2004/07/26 22:52:15-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/ide/Kconfig
# 2004/07/26 22:52:15-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/07/25 16:30:41-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# drivers/pci/quirks.c
# 2004/07/25 16:30:37-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/07/18 06:52:03-04:00 jgarzik@pobox.com
# Merge pobox.com:/spare/repo/linux-2.6
# into pobox.com:/spare/repo/libata-2.6
#
# drivers/scsi/libata-core.c
# 2004/07/18 06:51:59-04:00 jgarzik@pobox.com +0 -0
# Auto merged
#
# drivers/pci/quirks.c
# 2004/07/18 06:51:59-04:00 jgarzik@pobox.com +0 -24
# Auto merged
#
# ChangeSet
# 2004/07/16 18:33:45-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# include/linux/pci_ids.h
# 2004/07/16 18:33:41-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/libata-core.c
# 2004/07/16 18:33:41-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/Kconfig
# 2004/07/16 18:33:41-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/pci/quirks.c
# 2004/07/16 18:33:41-07:00 akpm@bix.(none) +0 -24
# Auto merged
#
# ChangeSet
# 2004/07/11 13:36:09-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# drivers/scsi/Kconfig
# 2004/07/11 13:36:06-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/07/10 16:48:25-07:00 akpm@bix.(none)
# Merge bk://gkernel.bkbits.net/libata-2.6
# into bix.(none):/usr/src/bk-libata
#
# drivers/scsi/libata-core.c
# 2004/07/10 16:48:21-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/07/10 12:47:34-04:00 jgarzik@pobox.com
# [libata] ATAPI work - cdb len, new taskfile protocol, cleanups
#
# * new helper atapi_cdb_len() in linux/ata.h, use it after
# IDENTIFY PACKET DEVICE command completes
# * add new taskfile protocol ATA_PROT_ATAPI_NODATA
# * store scsi cdb in ata_queued_cmd. This removes another dependence
# on the scsi layer, and enables us to issue an internal REQUEST SENSE.
# * store cdb len in ata_port
# * new constant ATAPI_CDB_LEN for max cdb length
# * move ATA taskfile and SCSI cdb near the top of ata_queued_cmd, for
# better cacheline friendliness.
#
# include/linux/libata.h
# 2004/07/10 12:47:28-04:00 jgarzik@pobox.com +4 -1
# [libata] ATAPI work - cdb len, new taskfile protocol, cleanups
#
# * new helper atapi_cdb_len() in linux/ata.h, use it after
# IDENTIFY PACKET DEVICE command completes
# * add new taskfile protocol ATA_PROT_ATAPI_NODATA
# * store scsi cdb in ata_queued_cmd. This removes another dependence
# on the scsi layer, and enables us to issue an internal REQUEST SENSE.
# * store cdb len in ata_port
# * new constant ATAPI_CDB_LEN for max cdb length
# * move ATA taskfile and SCSI cdb near the top of ata_queued_cmd, for
# better cacheline friendliness.
#
# include/linux/ata.h
# 2004/07/10 12:47:28-04:00 jgarzik@pobox.com +14 -1
# [libata] ATAPI work - cdb len, new taskfile protocol, cleanups
#
# * new helper atapi_cdb_len() in linux/ata.h, use it after
# IDENTIFY PACKET DEVICE command completes
# * add new taskfile protocol ATA_PROT_ATAPI_NODATA
# * store scsi cdb in ata_queued_cmd. This removes another dependence
# on the scsi layer, and enables us to issue an internal REQUEST SENSE.
# * store cdb len in ata_port
# * new constant ATAPI_CDB_LEN for max cdb length
# * move ATA taskfile and SCSI cdb near the top of ata_queued_cmd, for
# better cacheline friendliness.
#
# drivers/scsi/libata-scsi.c
# 2004/07/10 12:47:28-04:00 jgarzik@pobox.com +11 -8
# [libata] ATAPI work - cdb len, new taskfile protocol, cleanups
#
# * new helper atapi_cdb_len() in linux/ata.h, use it after
# IDENTIFY PACKET DEVICE command completes
# * add new taskfile protocol ATA_PROT_ATAPI_NODATA
# * store scsi cdb in ata_queued_cmd. This removes another dependence
# on the scsi layer, and enables us to issue an internal REQUEST SENSE.
# * store cdb len in ata_port
# * new constant ATAPI_CDB_LEN for max cdb length
# * move ATA taskfile and SCSI cdb near the top of ata_queued_cmd, for
# better cacheline friendliness.
#
# drivers/scsi/libata-core.c
# 2004/07/10 12:47:28-04:00 jgarzik@pobox.com +17 -8
# [libata] ATAPI work - cdb len, new taskfile protocol, cleanups
#
# * new helper atapi_cdb_len() in linux/ata.h, use it after
# IDENTIFY PACKET DEVICE command completes
# * add new taskfile protocol ATA_PROT_ATAPI_NODATA
# * store scsi cdb in ata_queued_cmd. This removes another dependence
# on the scsi layer, and enables us to issue an internal REQUEST SENSE.
# * store cdb len in ata_port
# * new constant ATAPI_CDB_LEN for max cdb length
# * move ATA taskfile and SCSI cdb near the top of ata_queued_cmd, for
# better cacheline friendliness.
#
# ChangeSet
# 2004/07/10 11:09:17-04:00 jgarzik@pobox.com
# [libata] flags cleanup
#
# Remove unused/redundant flags ATA_DFLAG_{MASTER,WCACHE}
#
# include/linux/libata.h
# 2004/07/10 11:09:11-04:00 jgarzik@pobox.com +1 -4
# [libata] flags cleanup
#
# Remove unused/redundant flags ATA_DFLAG_{MASTER,WCACHE}
#
# drivers/scsi/libata-core.c
# 2004/07/10 11:09:11-04:00 jgarzik@pobox.com +0 -1
# [libata] flags cleanup
#
# Remove unused/redundant flags ATA_DFLAG_{MASTER,WCACHE}
#
# drivers/scsi/ata_piix.c
# 2004/07/10 11:09:11-04:00 jgarzik@pobox.com +1 -1
# [libata] flags cleanup
#
# Remove unused/redundant flags ATA_DFLAG_{MASTER,WCACHE}
#
# ChangeSet
# 2004/07/10 10:29:46-04:00 jgarzik@pobox.com
# [libata ata_piix] make sure AHCI is disabled, if h/w is used by this driver
#
# AHCI must be disabled if we are to have access to taskfile registers.
#
# drivers/scsi/ata_piix.c
# 2004/07/10 10:29:40-04:00 jgarzik@pobox.com +58 -6
# [libata ata_piix] make sure AHCI is disabled, if h/w is used by this driver
#
# AHCI must be disabled if we are to have access to taskfile registers.
#
# ChangeSet
# 2004/07/09 23:58:35-04:00 jgarzik@pobox.com
# [PCI, libata] Fix "combined mode" PCI quirk for ICH6
#
# The hardware vendor, in their infinite wisdom, make the combined
# mode configuration register different between ICH5 and ICH6.
#
# Take this into account.
#
# drivers/pci/quirks.c
# 2004/07/09 23:58:29-04:00 jgarzik@pobox.com +24 -7
# [PCI, libata] Fix "combined mode" PCI quirk for ICH6
#
# The hardware vendor, in their infinite wisdom, make the combined
# mode configuration register different between ICH5 and ICH6.
#
# Take this into account.
#
# ChangeSet
# 2004/07/09 23:20:04-04:00 jgarzik@pobox.com
# [libata] ATAPI work - PIO xfer, completion function
#
# Move hand-coded ATA Data register I/O from ata_pio_sector() to its
# own function ata_data_xfer(), so that it may also be used to send the
# ATAPI packet to hardware.
#
# Use ata_data_xfer() in ATAPI packet send.
#
# Separate ATA and ATAPI completion functions.
#
# drivers/scsi/libata-scsi.c
# 2004/07/09 23:19:58-04:00 jgarzik@pobox.com +30 -7
# [libata] ATAPI work - PIO xfer, completion function
#
# Move hand-coded ATA Data register I/O from ata_pio_sector() to its
# own function ata_data_xfer(), so that it may also be used to send the
# ATAPI packet to hardware.
#
# Use ata_data_xfer() in ATAPI packet send.
#
# Separate ATA and ATAPI completion functions.
#
# drivers/scsi/libata-core.c
# 2004/07/09 23:19:57-04:00 jgarzik@pobox.com +41 -22
# [libata] ATAPI work - PIO xfer, completion function
#
# Move hand-coded ATA Data register I/O from ata_pio_sector() to its
# own function ata_data_xfer(), so that it may also be used to send the
# ATAPI packet to hardware.
#
# Use ata_data_xfer() in ATAPI packet send.
#
# Separate ATA and ATAPI completion functions.
#
# ChangeSet
# 2004/07/08 14:25:45-07:00 akpm@bix.(none)
# Merge bk://gkernel.bkbits.net/libata-2.6
# into bix.(none):/usr/src/bk-libata
#
# drivers/scsi/libata-core.c
# 2004/07/08 14:25:42-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/07/07 17:14:55-04:00 jgarzik@pobox.com
# [libata] update IDENTIFY DEVICE path to use ata_queued_cmd
#
# rather than hand-rolling our own taskfile call (which won't work at
# all on newer SATA controllers).
#
# Individual changes:
# * use ata_qc_issue to issue identify-device command
# * implement MMIO path for PIO data xfer
# * implement PIO error handling path
#
# drivers/scsi/libata-core.c
# 2004/07/07 17:14:48-04:00 jgarzik@pobox.com +72 -62
# [libata] update IDENTIFY DEVICE path to use ata_queued_cmd
#
# rather than hand-rolling our own taskfile call (which won't work at
# all on newer SATA controllers).
#
# Individual changes:
# * use ata_qc_issue to issue identify-device command
# * implement MMIO path for PIO data xfer
# * implement PIO error handling path
#
# ChangeSet
# 2004/07/07 15:52:33-04:00 jgarzik@pobox.com
# Merge pobox.com:/spare/repo/libata-2.6
# into pobox.com:/spare/repo/sata-hacks/qc-xfermode
#
# drivers/scsi/libata-core.c
# 2004/07/07 15:52:29-04:00 jgarzik@pobox.com +0 -0
# Auto merged
#
# ChangeSet
# 2004/07/07 15:51:57-04:00 jgarzik@pobox.com
# [libata] pio/dma flag bug fix, and cleanup
#
# In the transfer-mode cleanup recently, the code that set flag
# ATA_DFLAG_PIO disappeared. Resurrect it.
#
# Remove ATA_QCFLAG_DMA, it isn't needed.
#
# Always set polling in the ->qc_issue function, rather than force
# the user to do it when setting up an ata_queued_cmd. This gives
# maximum flexibility to the driver, letting the driver choose
# whether or not to poll.
#
# include/linux/libata.h
# 2004/07/07 15:51:50-04:00 jgarzik@pobox.com +0 -2
# [libata] pio/dma flag bug fix, and cleanup
#
# In the transfer-mode cleanup recently, the code that set flag
# ATA_DFLAG_PIO disappeared. Resurrect it.
#
# Remove ATA_QCFLAG_DMA, it isn't needed.
#
# Always set polling in the ->qc_issue function, rather than force
# the user to do it when setting up an ata_queued_cmd. This gives
# maximum flexibility to the driver, letting the driver choose
# whether or not to poll.
#
# drivers/scsi/libata-scsi.c
# 2004/07/07 15:51:50-04:00 jgarzik@pobox.com +5 -4
# [libata] pio/dma flag bug fix, and cleanup
#
# In the transfer-mode cleanup recently, the code that set flag
# ATA_DFLAG_PIO disappeared. Resurrect it.
#
# Remove ATA_QCFLAG_DMA, it isn't needed.
#
# Always set polling in the ->qc_issue function, rather than force
# the user to do it when setting up an ata_queued_cmd. This gives
# maximum flexibility to the driver, letting the driver choose
# whether or not to poll.
#
# drivers/scsi/libata-core.c
# 2004/07/07 15:51:50-04:00 jgarzik@pobox.com +4 -2
# [libata] pio/dma flag bug fix, and cleanup
#
# In the transfer-mode cleanup recently, the code that set flag
# ATA_DFLAG_PIO disappeared. Resurrect it.
#
# Remove ATA_QCFLAG_DMA, it isn't needed.
#
# Always set polling in the ->qc_issue function, rather than force
# the user to do it when setting up an ata_queued_cmd. This gives
# maximum flexibility to the driver, letting the driver choose
# whether or not to poll.
#
# ChangeSet
# 2004/07/05 21:53:56-04:00 jgarzik@pobox.com
# [libata sata_sx4] deliver non-data taskfiles using Promise packet format
#
# drivers/scsi/sata_sx4.c
# 2004/07/05 21:53:50-04:00 jgarzik@pobox.com +97 -64
# [libata sata_sx4] deliver non-data taskfiles using Promise packet format
#
# drivers/scsi/sata_promise.c
# 2004/07/05 21:53:50-04:00 jgarzik@pobox.com +1 -1
# [libata sata_sx4] deliver non-data taskfiles using Promise packet format
#
# ChangeSet
# 2004/07/04 22:50:07-07:00 akpm@bix.(none)
# Merge bk://gkernel.bkbits.net/libata-2.6
# into bix.(none):/usr/src/bk-libata
#
# drivers/scsi/sata_vsc.c
# 2004/07/04 22:50:03-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/sata_sis.c
# 2004/07/04 22:50:03-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/libata-core.c
# 2004/07/04 22:50:03-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/07/04 22:49:15-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# drivers/scsi/sata_vsc.c
# 2004/07/04 22:49:11-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/sata_sis.c
# 2004/07/04 22:49:11-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/libata-core.c
# 2004/07/04 22:49:11-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/07/04 23:40:44-04:00 jgarzik@pobox.com
# [libata sata_promise] convert to using packets for non-data taskfiles
#
# drivers/scsi/sata_promise.c
# 2004/07/04 23:40:38-04:00 jgarzik@pobox.com +27 -41
# [libata sata_promise] convert to using packets for non-data taskfiles
#
# ChangeSet
# 2004/07/04 21:08:08-04:00 jgarzik@pobox.com
# Merge pobox.com:/spare/repo/libata-2.6
# into pobox.com:/spare/repo/sata-hacks/qc-xfermode
#
# drivers/scsi/libata-core.c
# 2004/07/04 21:08:05-04:00 jgarzik@pobox.com +0 -0
# Auto merged
#
# ChangeSet
# 2004/07/04 21:02:36-04:00 jgarzik@pobox.com
# [libata] transfer mode bug fixes and type cleanup
#
# Fix two bugs that causes the recently-added transfer mode code
# to break on 64-bit platforms. Make associated code more type-correct
# in the process.
#
# include/linux/libata.h
# 2004/07/04 21:02:31-04:00 jgarzik@pobox.com +3 -3
# [libata] transfer mode bug fixes and type cleanup
#
# Fix two bugs that causes the recently-added transfer mode code
# to break on 64-bit platforms. Make associated code more type-correct
# in the process.
#
# drivers/scsi/libata-core.c
# 2004/07/04 21:02:31-04:00 jgarzik@pobox.com +33 -21
# [libata] transfer mode bug fixes and type cleanup
#
# Fix two bugs that causes the recently-added transfer mode code
# to break on 64-bit platforms. Make associated code more type-correct
# in the process.
#
# ChangeSet
# 2004/07/04 19:45:33-04:00 jgarzik@pobox.com
# [libata] convert set-xfer-mode operation to use ata_queued_cmd
#
# drivers/scsi/libata-core.c
# 2004/07/04 19:45:27-04:00 jgarzik@pobox.com +27 -17
# [libata] convert set-xfer-mode operation to use ata_queued_cmd
#
# ChangeSet
# 2004/07/04 19:43:20-04:00 jgarzik@pobox.com
# [libata] fix completion bug, better debug output
#
# When using a completion, we need to clear the entry, and furthermore
# clear the entry before we call the completion.
#
# Make debugging output a bit more explicit.
#
# drivers/scsi/libata-core.c
# 2004/07/04 19:43:14-04:00 jgarzik@pobox.com +10 -4
# [libata] fix completion bug, better debug output
#
# When using a completion, we need to clear the entry, and furthermore
# clear the entry before we call the completion.
#
# Make debugging output a bit more explicit.
#
# ChangeSet
# 2004/07/04 17:35:29-04:00 jgarzik@pobox.com
# [libata] transfer mode cleanup
#
# Add MWDMA support, and rework pio/mwdma/udma mode setup.
#
# In the lone test case for PATA support, ata_piix, MWDMA mode setting
# does not appear to work here. UDMA and PIO continue to work, so nobody
# will really notice. But beware. Probably a driver problem, not
# a bug in the core.
#
# Also, doesn't bother writing to dummy timing registers on ICH5/6 SATA
# anymore.
#
# include/linux/libata.h
# 2004/07/04 17:35:23-04:00 jgarzik@pobox.com +15 -6
# [libata] transfer mode cleanup
#
# Add MWDMA support, and rework pio/mwdma/udma mode setup.
#
# In the lone test case for PATA support, ata_piix, MWDMA mode setting
# does not appear to work here. UDMA and PIO continue to work, so nobody
# will really notice. But beware. Probably a driver problem, not
# a bug in the core.
#
# Also, doesn't bother writing to dummy timing registers on ICH5/6 SATA
# anymore.
#
# include/linux/ata.h
# 2004/07/04 17:35:23-04:00 jgarzik@pobox.com +7 -0
# [libata] transfer mode cleanup
#
# Add MWDMA support, and rework pio/mwdma/udma mode setup.
#
# In the lone test case for PATA support, ata_piix, MWDMA mode setting
# does not appear to work here. UDMA and PIO continue to work, so nobody
# will really notice. But beware. Probably a driver problem, not
# a bug in the core.
#
# Also, doesn't bother writing to dummy timing registers on ICH5/6 SATA
# anymore.
#
# drivers/scsi/sata_vsc.c
# 2004/07/04 17:35:23-04:00 jgarzik@pobox.com +1 -0
# [libata] transfer mode cleanup
#
# Add MWDMA support, and rework pio/mwdma/udma mode setup.
#
# In the lone test case for PATA support, ata_piix, MWDMA mode setting
# does not appear to work here. UDMA and PIO continue to work, so nobody
# will really notice. But beware. Probably a driver problem, not
# a bug in the core.
#
# Also, doesn't bother writing to dummy timing registers on ICH5/6 SATA
# anymore.
#
# drivers/scsi/sata_via.c
# 2004/07/04 17:35:23-04:00 jgarzik@pobox.com +1 -0
# [libata] transfer mode cleanup
#
# Add MWDMA support, and rework pio/mwdma/udma mode setup.
#
# In the lone test case for PATA support, ata_piix, MWDMA mode setting
# does not appear to work here. UDMA and PIO continue to work, so nobody
# will really notice. But beware. Probably a driver problem, not
# a bug in the core.
#
# Also, doesn't bother writing to dummy timing registers on ICH5/6 SATA
# anymore.
#
# drivers/scsi/sata_sx4.c
# 2004/07/04 17:35:23-04:00 jgarzik@pobox.com +3 -1
# [libata] transfer mode cleanup
#
# Add MWDMA support, and rework pio/mwdma/udma mode setup.
#
# In the lone test case for PATA support, ata_piix, MWDMA mode setting
# does not appear to work here. UDMA and PIO continue to work, so nobody
# will really notice. But beware. Probably a driver problem, not
# a bug in the core.
#
# Also, doesn't bother writing to dummy timing registers on ICH5/6 SATA
# anymore.
#
# drivers/scsi/sata_svw.c
# 2004/07/04 17:35:23-04:00 jgarzik@pobox.com +1 -0
# [libata] transfer mode cleanup
#
# Add MWDMA support, and rework pio/mwdma/udma mode setup.
#
# In the lone test case for PATA support, ata_piix, MWDMA mode setting
# does not appear to work here. UDMA and PIO continue to work, so nobody
# will really notice. But beware. Probably a driver problem, not
# a bug in the core.
#
# Also, doesn't bother writing to dummy timing registers on ICH5/6 SATA
# anymore.
#
# drivers/scsi/sata_sis.c
# 2004/07/04 17:35:23-04:00 jgarzik@pobox.com +2 -1
# [libata] transfer mode cleanup
#
# Add MWDMA support, and rework pio/mwdma/udma mode setup.
#
# In the lone test case for PATA support, ata_piix, MWDMA mode setting
# does not appear to work here. UDMA and PIO continue to work, so nobody
# will really notice. But beware. Probably a driver problem, not
# a bug in the core.
#
# Also, doesn't bother writing to dummy timing registers on ICH5/6 SATA
# anymore.
#
# drivers/scsi/sata_sil.c
# 2004/07/04 17:35:23-04:00 jgarzik@pobox.com +5 -2
# [libata] transfer mode cleanup
#
# Add MWDMA support, and rework pio/mwdma/udma mode setup.
#
# In the lone test case for PATA support, ata_piix, MWDMA mode setting
# does not appear to work here. UDMA and PIO continue to work, so nobody
# will really notice. But beware. Probably a driver problem, not
# a bug in the core.
#
# Also, doesn't bother writing to dummy timing registers on ICH5/6 SATA
# anymore.
#
# drivers/scsi/sata_promise.c
# 2004/07/04 17:35:23-04:00 jgarzik@pobox.com +5 -2
# [libata] transfer mode cleanup
#
# Add MWDMA support, and rework pio/mwdma/udma mode setup.
#
# In the lone test case for PATA support, ata_piix, MWDMA mode setting
# does not appear to work here. UDMA and PIO continue to work, so nobody
# will really notice. But beware. Probably a driver problem, not
# a bug in the core.
#
# Also, doesn't bother writing to dummy timing registers on ICH5/6 SATA
# anymore.
#
# drivers/scsi/sata_nv.c
# 2004/07/04 17:35:23-04:00 jgarzik@pobox.com +2 -0
# [libata] transfer mode cleanup
#
# Add MWDMA support, and rework pio/mwdma/udma mode setup.
#
# In the lone test case for PATA support, ata_piix, MWDMA mode setting
# does not appear to work here. UDMA and PIO continue to work, so nobody
# will really notice. But beware. Probably a driver problem, not
# a bug in the core.
#
# Also, doesn't bother writing to dummy timing registers on ICH5/6 SATA
# anymore.
#
# drivers/scsi/libata-core.c
# 2004/07/04 17:35:23-04:00 jgarzik@pobox.com +224 -181
# [libata] transfer mode cleanup
#
# Add MWDMA support, and rework pio/mwdma/udma mode setup.
#
# In the lone test case for PATA support, ata_piix, MWDMA mode setting
# does not appear to work here. UDMA and PIO continue to work, so nobody
# will really notice. But beware. Probably a driver problem, not
# a bug in the core.
#
# Also, doesn't bother writing to dummy timing registers on ICH5/6 SATA
# anymore.
#
# drivers/scsi/ata_piix.c
# 2004/07/04 17:35:22-04:00 jgarzik@pobox.com +51 -30
# [libata] transfer mode cleanup
#
# Add MWDMA support, and rework pio/mwdma/udma mode setup.
#
# In the lone test case for PATA support, ata_piix, MWDMA mode setting
# does not appear to work here. UDMA and PIO continue to work, so nobody
# will really notice. But beware. Probably a driver problem, not
# a bug in the core.
#
# Also, doesn't bother writing to dummy timing registers on ICH5/6 SATA
# anymore.
#
# ChangeSet
# 2004/07/03 13:24:49-07:00 akpm@bix.(none)
# Merge bk://gkernel.bkbits.net/libata-2.6
# into bix.(none):/usr/src/bk-libata
#
# drivers/scsi/sata_vsc.c
# 2004/07/03 13:24:46-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/sata_sis.c
# 2004/07/03 13:24:46-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/libata-core.c
# 2004/07/03 13:24:46-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/07/02 15:20:41-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# include/linux/pci_ids.h
# 2004/07/02 15:20:37-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/Kconfig
# 2004/07/02 15:20:37-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/07/01 01:39:29-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# include/linux/pci_ids.h
# 2004/07/01 01:39:25-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/06/27 16:58:09-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# drivers/scsi/Makefile
# 2004/06/27 16:58:06-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/Kconfig
# 2004/06/27 16:58:06-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/06/24 18:20:09-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# include/linux/pci_ids.h
# 2004/06/24 18:20:05-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/06/24 12:47:00-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# include/linux/pci_ids.h
# 2004/06/24 12:46:56-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/ide/Kconfig
# 2004/06/24 12:46:56-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/06/22 12:15:04-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# drivers/scsi/libata-core.c
# 2004/06/22 12:15:00-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/Makefile
# 2004/06/22 12:15:00-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/Kconfig
# 2004/06/22 12:15:00-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/ide/Kconfig
# 2004/06/22 12:15:00-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/06/18 12:17:44-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# include/linux/pci_ids.h
# 2004/06/18 12:17:40-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/Makefile
# 2004/06/18 12:17:40-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/Kconfig
# 2004/06/18 12:17:40-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/ide/Kconfig
# 2004/06/18 12:17:40-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/06/17 20:13:32-07:00 akpm@bix.(none)
# Merge bk://gkernel.bkbits.net/libata-2.6
# into bix.(none):/usr/src/bk-libata
#
# drivers/scsi/sata_vsc.c
# 2004/06/17 20:13:28-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/sata_sis.c
# 2004/06/17 20:13:28-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/libata-core.c
# 2004/06/17 20:13:28-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/06/15 21:49:46-07:00 akpm@bix.(none)
# Merge bk://gkernel.bkbits.net/libata-2.6
# into bix.(none):/usr/src/bk-libata
#
# drivers/scsi/libata-core.c
# 2004/06/15 21:49:43-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/06/15 21:47:10-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# include/linux/pci_ids.h
# 2004/06/15 21:47:03-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/06/03 10:32:06-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# include/linux/pci_ids.h
# 2004/06/03 10:32:02-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/06/02 23:44:41-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# drivers/scsi/sata_vsc.c
# 2004/06/02 23:44:38-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/sata_sis.c
# 2004/06/02 23:44:38-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/libata-core.c
# 2004/06/02 23:44:38-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/06/02 13:27:03-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# include/linux/pci_ids.h
# 2004/06/02 13:27:00-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/05/28 17:09:11-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# include/linux/pci_ids.h
# 2004/05/28 17:09:07-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/05/28 13:30:30-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# include/linux/pci_ids.h
# 2004/05/28 13:30:27-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/05/24 11:34:43-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# include/linux/pci_ids.h
# 2004/05/24 11:34:40-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/05/22 23:37:15-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# include/linux/pci_ids.h
# 2004/05/22 23:37:12-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/05/21 18:58:02-07:00 akpm@bix.(none)
# Merge bk://gkernel.bkbits.net/libata-2.6
# into bix.(none):/usr/src/bk-libata
#
# drivers/scsi/libata-core.c
# 2004/05/21 18:57:59-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/05/18 23:52:37-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# include/linux/pci_ids.h
# 2004/05/18 23:52:34-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/libata-core.c
# 2004/05/18 23:52:34-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/05/18 14:40:31-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# include/linux/pci_ids.h
# 2004/05/18 14:40:28-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/05/16 01:41:16-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# include/linux/pci_ids.h
# 2004/05/16 01:41:13-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/sata_vsc.c
# 2004/05/16 01:41:13-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/sata_sis.c
# 2004/05/16 01:41:13-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/05/14 21:35:03-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# include/linux/pci_ids.h
# 2004/05/14 21:35:00-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/05/11 16:47:43-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# include/linux/pci_ids.h
# 2004/05/11 16:47:40-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/sata_vsc.c
# 2004/05/11 16:47:40-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/sata_sis.c
# 2004/05/11 16:47:40-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/05/07 01:05:16-07:00 akpm@bix.(none)
# Merge bk://gkernel.bkbits.net/libata-2.6
# into bix.(none):/usr/src/bk-libata
#
# include/linux/pci_ids.h
# 2004/05/07 01:05:13-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/sata_vsc.c
# 2004/05/07 01:05:13-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/scsi/sata_sis.c
# 2004/05/07 01:05:13-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/05/05 14:42:21-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# drivers/scsi/sata_vsc.c
# 2004/05/05 14:42:18-07:00 akpm@bix.(none) +0 -4
# Auto merged
#
# drivers/scsi/sata_sis.c
# 2004/05/05 14:42:18-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/04/29 15:49:47-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# include/linux/pci_ids.h
# 2004/04/29 15:49:44-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/04/25 22:53:46-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-libata
#
# include/linux/pci_ids.h
# 2004/04/25 22:53:43-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
diff -Nru a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
--- a/drivers/scsi/ata_piix.c 2004-08-04 17:53:32 -07:00
+++ b/drivers/scsi/ata_piix.c 2004-08-04 17:53:32 -07:00
@@ -39,6 +39,7 @@
ICH5_PMR = 0x90, /* port mapping register */
ICH5_PCS = 0x92, /* port control and status */
+ PIIX_FLAG_AHCI = (1 << 28), /* AHCI possible */
PIIX_FLAG_CHECKINTR = (1 << 29), /* make sure PCI INTx enabled */
PIIX_FLAG_COMBINED = (1 << 30), /* combined mode possible */
@@ -58,6 +59,7 @@
ich5_sata = 1,
piix4_pata = 2,
ich6_sata = 3,
+ ich6_sata_rm = 4,
};
static int piix_init_one (struct pci_dev *pdev,
@@ -65,10 +67,8 @@
static void piix_pata_phy_reset(struct ata_port *ap);
static void piix_sata_phy_reset(struct ata_port *ap);
-static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev,
- unsigned int pio);
-static void piix_set_udmamode (struct ata_port *ap, struct ata_device *adev,
- unsigned int udma);
+static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev);
+static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev);
static unsigned int in_module_init = 1;
@@ -87,13 +87,9 @@
{ 0x8086, 0x24df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
{ 0x8086, 0x25a3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
{ 0x8086, 0x25b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
-
- /* ICH6 operates in two modes, "looks-like-ICH5" mode,
- * and enhanced mode, with queueing and other fancy stuff.
- * This is distinguished by PCI class code.
- */
{ 0x8086, 0x2651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
- { 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
+ { 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_rm },
+ { 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_rm },
{ } /* terminate list */
};
@@ -126,7 +122,7 @@
static struct ata_port_operations piix_pata_ops = {
.port_disable = ata_port_disable,
.set_piomode = piix_set_piomode,
- .set_udmamode = piix_set_udmamode,
+ .set_dmamode = piix_set_dmamode,
.tf_load = ata_tf_load_pio,
.tf_read = ata_tf_read_pio,
@@ -151,8 +147,6 @@
static struct ata_port_operations piix_sata_ops = {
.port_disable = ata_port_disable,
- .set_piomode = piix_set_piomode,
- .set_udmamode = piix_set_udmamode,
.tf_load = ata_tf_load_pio,
.tf_read = ata_tf_read_pio,
@@ -181,7 +175,12 @@
.sht = &piix_sht,
.host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST |
PIIX_FLAG_CHECKINTR,
- .pio_mask = 0x03, /* pio3-4 */
+ .pio_mask = 0x1f, /* pio0-4 */
+#if 0
+ .mwdma_mask = 0x06, /* mwdma1-2 */
+#else
+ .mwdma_mask = 0x00, /* mwdma broken */
+#endif
.udma_mask = ATA_UDMA_MASK_40C, /* FIXME: cbl det */
.port_ops = &piix_pata_ops,
},
@@ -191,8 +190,9 @@
.sht = &piix_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST |
PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR,
- .pio_mask = 0x03, /* pio3-4 */
- .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x7f, /* udma0-6 */
.port_ops = &piix_sata_ops,
},
@@ -200,7 +200,12 @@
{
.sht = &piix_sht,
.host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
- .pio_mask = 0x03, /* pio3-4 */
+ .pio_mask = 0x1f, /* pio0-4 */
+#if 0
+ .mwdma_mask = 0x06, /* mwdma1-2 */
+#else
+ .mwdma_mask = 0x00, /* mwdma broken */
+#endif
.udma_mask = ATA_UDMA_MASK_40C, /* FIXME: cbl det */
.port_ops = &piix_pata_ops,
},
@@ -211,8 +216,21 @@
.host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST |
PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR |
ATA_FLAG_SLAVE_POSS,
- .pio_mask = 0x03, /* pio3-4 */
- .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x7f, /* udma0-6 */
+ .port_ops = &piix_sata_ops,
+ },
+
+ /* ich6_sata_rm */
+ {
+ .sht = &piix_sht,
+ .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST |
+ PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR |
+ ATA_FLAG_SLAVE_POSS | PIIX_FLAG_AHCI,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x7f, /* udma0-6 */
.port_ops = &piix_sata_ops,
},
};
@@ -368,11 +386,11 @@
* None (inherited from caller).
*/
-static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev,
- unsigned int pio)
+static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev)
{
+ unsigned int pio = adev->pio_mode;
struct pci_dev *dev = ap->host_set->pdev;
- unsigned int is_slave = (adev->flags & ATA_DFLAG_MASTER) ? 0 : 1;
+ unsigned int is_slave = (adev->devno != 0);
unsigned int master_port= ap->port_no ? 0x42 : 0x40;
unsigned int slave_port = 0x44;
u16 master_data;
@@ -409,7 +427,7 @@
}
/**
- * piix_set_udmamode - Initialize host controller PATA PIO timings
+ * piix_set_dmamode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
* @adev: um
* @udma: udma mode, 0 - 6
@@ -420,9 +438,9 @@
* None (inherited from caller).
*/
-static void piix_set_udmamode (struct ata_port *ap, struct ata_device *adev,
- unsigned int udma)
+static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev)
{
+ unsigned int udma = adev->dma_mode; /* FIXME: MWDMA too */
struct pci_dev *dev = ap->host_set->pdev;
u8 maslave = ap->port_no ? 0x42 : 0x40;
u8 speed = udma;
@@ -452,25 +470,38 @@
case XFER_UDMA_3:
case XFER_UDMA_1: u_speed = 1 << (drive_dn * 4); break;
case XFER_UDMA_0: u_speed = 0 << (drive_dn * 4); break;
+ case XFER_MW_DMA_2:
+ case XFER_MW_DMA_1: break;
default:
BUG();
return;
}
- if (!(reg48 & u_flag))
- pci_write_config_byte(dev, 0x48, reg48 | u_flag);
- if (speed == XFER_UDMA_5) {
- pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag);
+ if (speed >= XFER_UDMA_0) {
+ if (!(reg48 & u_flag))
+ pci_write_config_byte(dev, 0x48, reg48 | u_flag);
+ if (speed == XFER_UDMA_5) {
+ pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag);
+ } else {
+ pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
+ }
+ if ((reg4a & a_speed) != u_speed)
+ pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed);
+ if (speed > XFER_UDMA_2) {
+ if (!(reg54 & v_flag))
+ pci_write_config_byte(dev, 0x54, reg54 | v_flag);
+ } else
+ pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
} else {
- pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
+ if (reg48 & u_flag)
+ pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
+ if (reg4a & a_speed)
+ pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
+ if (reg54 & v_flag)
+ pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
+ if (reg55 & w_flag)
+ pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
}
- if ((reg4a & a_speed) != u_speed)
- pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed);
- if (speed > XFER_UDMA_2) {
- if (!(reg54 & v_flag))
- pci_write_config_byte(dev, 0x54, reg54 | v_flag);
- } else
- pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
}
/* move to PCI layer, integrate w/ MSI stuff */
@@ -485,6 +516,42 @@
}
}
+#define AHCI_PCI_BAR 5
+#define AHCI_GLOBAL_CTL 0x04
+#define AHCI_ENABLE (1 << 31)
+static int piix_disable_ahci(struct pci_dev *pdev)
+{
+ void *mmio;
+ unsigned long addr;
+ u32 tmp;
+ int rc = 0;
+
+ /* BUG: pci_enable_device has not yet been called. This
+ * works because this device is usually set up by BIOS.
+ */
+
+ addr = pci_resource_start(pdev, AHCI_PCI_BAR);
+ if (!addr || !pci_resource_len(pdev, AHCI_PCI_BAR))
+ return 0;
+
+ mmio = ioremap(addr, 64);
+ if (!mmio)
+ return -ENOMEM;
+
+ tmp = readl(mmio + AHCI_GLOBAL_CTL);
+ if (tmp & AHCI_ENABLE) {
+ tmp &= ~AHCI_ENABLE;
+ writel(tmp, mmio + AHCI_GLOBAL_CTL);
+
+ tmp = readl(mmio + AHCI_GLOBAL_CTL);
+ if (tmp & AHCI_ENABLE)
+ rc = -EIO;
+ }
+
+ iounmap(mmio);
+ return rc;
+}
+
/**
* piix_init_one - Register PIIX ATA PCI device with kernel services
* @pdev: PCI device to register
@@ -516,6 +583,12 @@
port_info[0] = &piix_port_info[ent->driver_data];
port_info[1] = NULL;
+
+ if (port_info[0]->host_flags & PIIX_FLAG_AHCI) {
+ int rc = piix_disable_ahci(pdev);
+ if (rc)
+ return rc;
+ }
if (port_info[0]->host_flags & PIIX_FLAG_COMBINED) {
u8 tmp;
diff -Nru a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
--- a/drivers/scsi/libata-core.c 2004-08-04 17:53:32 -07:00
+++ b/drivers/scsi/libata-core.c 2004-08-04 17:53:32 -07:00
@@ -50,11 +50,14 @@
unsigned long tmout_pat,
unsigned long tmout);
static void __ata_dev_select (struct ata_port *ap, unsigned int device);
-static void ata_host_set_pio(struct ata_port *ap);
-static void ata_host_set_udma(struct ata_port *ap);
-static void ata_dev_set_pio(struct ata_port *ap, unsigned int device);
-static void ata_dev_set_udma(struct ata_port *ap, unsigned int device);
static void ata_set_mode(struct ata_port *ap);
+static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev);
+static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift);
+static int fgb(u32 bitmap);
+static int ata_choose_xfer_mode(struct ata_port *ap,
+ u8 *xfer_mode_out,
+ unsigned int *xfer_shift_out);
+static int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat);
static unsigned int ata_unique_id = 1;
static struct workqueue_struct *ata_wq;
@@ -524,7 +527,7 @@
dev->write_cmd = (cmd >> 8) & 0xff;
}
-static const char * udma_str[] = {
+static const char * xfer_mode_str[] = {
"UDMA/16",
"UDMA/25",
"UDMA/33",
@@ -533,6 +536,14 @@
"UDMA/100",
"UDMA/133",
"UDMA7",
+ "MWDMA0",
+ "MWDMA1",
+ "MWDMA2",
+ "PIO0",
+ "PIO1",
+ "PIO2",
+ "PIO3",
+ "PIO4",
};
/**
@@ -550,16 +561,24 @@
* @udma_mask, or the constant C string "<n/a>".
*/
-static const char *ata_udma_string(unsigned int udma_mask)
+static const char *ata_mode_string(unsigned int mask)
{
int i;
- for (i = 7; i >= 0; i--) {
- if (udma_mask & (1 << i))
- return udma_str[i];
- }
+ for (i = 7; i >= 0; i--)
+ if (mask & (1 << i))
+ goto out;
+ for (i = ATA_SHIFT_MWDMA + 2; i >= ATA_SHIFT_MWDMA; i--)
+ if (mask & (1 << i))
+ goto out;
+ for (i = ATA_SHIFT_PIO + 4; i >= ATA_SHIFT_PIO; i--)
+ if (mask & (1 << i))
+ goto out;
return "<n/a>";
+
+out:
+ return xfer_mode_str[i];
}
/**
@@ -930,10 +949,14 @@
{
struct ata_device *dev = &ap->device[device];
unsigned int i;
- u16 tmp, udma_modes;
+ u16 tmp;
+ unsigned long xfer_modes;
u8 status;
- struct ata_taskfile tf;
unsigned int using_edd;
+ DECLARE_COMPLETION(wait);
+ struct ata_queued_cmd *qc;
+ unsigned long flags;
+ int rc;
if (!ata_dev_present(dev)) {
DPRINTK("ENTER/EXIT (host %u, dev %u) -- nodev\n",
@@ -953,27 +976,34 @@
ata_dev_select(ap, device, 1, 1); /* select device 0/1 */
-retry:
- ata_tf_init(ap, &tf, device);
- tf.ctl |= ATA_NIEN;
- tf.protocol = ATA_PROT_PIO;
+ qc = ata_qc_new_init(ap, dev);
+ BUG_ON(qc == NULL);
+
+ ata_sg_init_one(qc, dev->id, sizeof(dev->id));
+ qc->pci_dma_dir = PCI_DMA_FROMDEVICE;
+ qc->tf.protocol = ATA_PROT_PIO;
+ qc->nsect = 1;
+retry:
if (dev->class == ATA_DEV_ATA) {
- tf.command = ATA_CMD_ID_ATA;
+ qc->tf.command = ATA_CMD_ID_ATA;
DPRINTK("do ATA identify\n");
} else {
- tf.command = ATA_CMD_ID_ATAPI;
+ qc->tf.command = ATA_CMD_ID_ATAPI;
DPRINTK("do ATAPI identify\n");
}
- ata_tf_to_host(ap, &tf);
+ qc->waiting = &wait;
+ qc->complete_fn = ata_qc_complete_noop;
- /* crazy ATAPI devices... */
- if (dev->class == ATA_DEV_ATAPI)
- msleep(150);
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ rc = ata_qc_issue(qc);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
- if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT))
+ if (rc)
goto err_out;
+ else
+ wait_for_completion(&wait);
status = ata_chk_status(ap);
if (status & ATA_ERR) {
@@ -988,45 +1018,20 @@
* ATA software reset (SRST, the default) does not appear
* to have this problem.
*/
- if ((using_edd) && (tf.command == ATA_CMD_ID_ATA)) {
+ if ((using_edd) && (qc->tf.command == ATA_CMD_ID_ATA)) {
u8 err = ata_chk_err(ap);
if (err & ATA_ABORTED) {
dev->class = ATA_DEV_ATAPI;
+ qc->cursg = 0;
+ qc->cursg_ofs = 0;
+ qc->cursect = 0;
+ qc->nsect = 1;
goto retry;
}
}
goto err_out;
}
- /* make sure we have BSY=0, DRQ=1 */
- if ((status & ATA_DRQ) == 0) {
- printk(KERN_WARNING "ata%u: dev %u (ATA%s?) not returning id page (0x%x)\n",
- ap->id, device,
- dev->class == ATA_DEV_ATA ? "" : "PI",
- status);
- goto err_out;
- }
-
- /* read IDENTIFY [X] DEVICE page */
- if (ap->flags & ATA_FLAG_MMIO) {
- for (i = 0; i < ATA_ID_WORDS; i++)
- dev->id[i] = readw((void *)ap->ioaddr.data_addr);
- } else
- for (i = 0; i < ATA_ID_WORDS; i++)
- dev->id[i] = inw(ap->ioaddr.data_addr);
-
- /* wait for host_idle */
- status = ata_wait_idle(ap);
- if (status & (ATA_BUSY | ATA_DRQ)) {
- printk(KERN_WARNING "ata%u: dev %u (ATA%s?) error after id page (0x%x)\n",
- ap->id, device,
- dev->class == ATA_DEV_ATA ? "" : "PI",
- status);
- goto err_out;
- }
-
- ata_irq_on(ap); /* re-enable interrupts */
-
/* print device capabilities */
printk(KERN_DEBUG "ata%u: dev %u cfg "
"49:%04x 82:%04x 83:%04x 84:%04x 85:%04x 86:%04x 87:%04x 88:%04x\n",
@@ -1045,12 +1050,13 @@
goto err_out_nosup;
}
- /* we require UDMA support */
- udma_modes =
- tmp = dev->id[ATA_ID_UDMA_MODES];
- if ((tmp & 0xff) == 0) {
- printk(KERN_DEBUG "ata%u: no udma\n", ap->id);
- goto err_out_nosup;
+ /* quick-n-dirty find max transfer mode; for printk only */
+ xfer_modes = dev->id[ATA_ID_UDMA_MODES];
+ if (!xfer_modes)
+ xfer_modes = (dev->id[ATA_ID_MWDMA_MODES]) << ATA_SHIFT_MWDMA;
+ if (!xfer_modes) {
+ xfer_modes = (dev->id[ATA_ID_PIO_MODES]) << (ATA_SHIFT_PIO + 3);
+ xfer_modes |= (0x7 << ATA_SHIFT_PIO);
}
ata_dump_id(dev);
@@ -1083,7 +1089,7 @@
/* print device info to dmesg */
printk(KERN_INFO "ata%u: dev %u ATA, max %s, %Lu sectors:%s\n",
ap->id, device,
- ata_udma_string(udma_modes),
+ ata_mode_string(xfer_modes),
(unsigned long long)dev->n_sectors,
dev->flags & ATA_DFLAG_LBA48 ? " lba48" : "");
}
@@ -1093,15 +1099,18 @@
if (ata_id_is_ata(dev)) /* sanity check */
goto err_out_nosup;
- /* see if 16-byte commands supported */
- tmp = dev->id[0] & 0x3;
- if (tmp == 1)
- ap->host->max_cmd_len = 16;
+ rc = atapi_cdb_len(dev->id);
+ if ((rc < 12) || (rc > ATAPI_CDB_LEN)) {
+ printk(KERN_WARNING "ata%u: unsupported CDB len\n", ap->id);
+ goto err_out_nosup;
+ }
+ ap->cdb_len = (unsigned int) rc;
+ ap->host->max_cmd_len = (unsigned char) ap->cdb_len;
/* print device info to dmesg */
printk(KERN_INFO "ata%u: dev %u ATAPI, max %s\n",
ap->id, device,
- ata_udma_string(udma_modes));
+ ata_mode_string(xfer_modes));
}
DPRINTK("EXIT, drv_stat = 0x%x\n", ata_chk_status(ap));
@@ -1232,6 +1241,101 @@
ap->flags |= ATA_FLAG_PORT_DISABLED;
}
+static struct {
+ unsigned int shift;
+ u8 base;
+} xfer_mode_classes[] = {
+ { ATA_SHIFT_UDMA, XFER_UDMA_0 },
+ { ATA_SHIFT_MWDMA, XFER_MW_DMA_0 },
+ { ATA_SHIFT_PIO, XFER_PIO_0 },
+};
+
+static inline u8 base_from_shift(unsigned int shift)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(xfer_mode_classes); i++)
+ if (xfer_mode_classes[i].shift == shift)
+ return xfer_mode_classes[i].base;
+
+ return 0xff;
+}
+
+static void ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev)
+{
+ int ofs, idx;
+ u8 base;
+
+ if (!ata_dev_present(dev) || (ap->flags & ATA_FLAG_PORT_DISABLED))
+ return;
+
+ if (dev->xfer_shift == ATA_SHIFT_PIO)
+ dev->flags |= ATA_DFLAG_PIO;
+
+ ata_dev_set_xfermode(ap, dev);
+
+ base = base_from_shift(dev->xfer_shift);
+ ofs = dev->xfer_mode - base;
+ idx = ofs + dev->xfer_shift;
+ WARN_ON(idx >= ARRAY_SIZE(xfer_mode_str));
+
+ DPRINTK("idx=%d xfer_shift=%u, xfer_mode=0x%x, base=0x%x, offset=%d\n",
+ idx, dev->xfer_shift, (int)dev->xfer_mode, (int)base, ofs);
+
+ printk(KERN_INFO "ata%u: dev %u configured for %s\n",
+ ap->id, dev->devno, xfer_mode_str[idx]);
+}
+
+static int ata_host_set_pio(struct ata_port *ap)
+{
+ unsigned int mask;
+ int x, i;
+ u8 base, xfer_mode;
+
+ mask = ata_get_mode_mask(ap, ATA_SHIFT_PIO);
+ x = fgb(mask);
+ if (x < 0) {
+ printk(KERN_WARNING "ata%u: no PIO support\n", ap->id);
+ return -1;
+ }
+
+ base = base_from_shift(ATA_SHIFT_PIO);
+ xfer_mode = base + x;
+
+ DPRINTK("base 0x%x xfer_mode 0x%x mask 0x%x x %d\n",
+ (int)base, (int)xfer_mode, mask, x);
+
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ struct ata_device *dev = &ap->device[i];
+ if (ata_dev_present(dev)) {
+ dev->pio_mode = xfer_mode;
+ dev->xfer_mode = xfer_mode;
+ dev->xfer_shift = ATA_SHIFT_PIO;
+ if (ap->ops->set_piomode)
+ ap->ops->set_piomode(ap, dev);
+ }
+ }
+
+ return 0;
+}
+
+static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode,
+ unsigned int xfer_shift)
+{
+ int i;
+
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ struct ata_device *dev = &ap->device[i];
+ if (ata_dev_present(dev)) {
+ dev->dma_mode = xfer_mode;
+ dev->xfer_mode = xfer_mode;
+ dev->xfer_shift = xfer_shift;
+ if (ap->ops->set_dmamode)
+ ap->ops->set_dmamode(ap, dev);
+ }
+ }
+}
+
/**
* ata_set_mode - Program timings and issue SET FEATURES - XFER
* @ap: port on which timings will be programmed
@@ -1241,29 +1345,28 @@
*/
static void ata_set_mode(struct ata_port *ap)
{
- unsigned int force_pio, i;
-
- ata_host_set_pio(ap);
- if (ap->flags & ATA_FLAG_PORT_DISABLED)
- return;
+ unsigned int i, xfer_shift;
+ u8 xfer_mode;
+ int rc;
- ata_host_set_udma(ap);
- if (ap->flags & ATA_FLAG_PORT_DISABLED)
- return;
+ /* step 1: always set host PIO timings */
+ rc = ata_host_set_pio(ap);
+ if (rc)
+ goto err_out;
-#ifdef ATA_FORCE_PIO
- force_pio = 1;
-#else
- force_pio = 0;
-#endif
+ /* step 2: choose the best data xfer mode */
+ xfer_mode = xfer_shift = 0;
+ rc = ata_choose_xfer_mode(ap, &xfer_mode, &xfer_shift);
+ if (rc)
+ goto err_out;
- if (force_pio) {
- ata_dev_set_pio(ap, 0);
- ata_dev_set_pio(ap, 1);
- } else {
- ata_dev_set_udma(ap, 0);
- ata_dev_set_udma(ap, 1);
- }
+ /* step 3: if that xfer mode isn't PIO, set host DMA timings */
+ if (xfer_shift != ATA_SHIFT_PIO)
+ ata_host_set_dma(ap, xfer_mode, xfer_shift);
+
+ /* step 4: update devices' xfer mode */
+ ata_dev_set_mode(ap, &ap->device[0]);
+ ata_dev_set_mode(ap, &ap->device[1]);
if (ap->flags & ATA_FLAG_PORT_DISABLED)
return;
@@ -1275,6 +1378,11 @@
struct ata_device *dev = &ap->device[i];
ata_dev_set_protocol(dev);
}
+
+ return;
+
+err_out:
+ ata_port_disable(ap);
}
/**
@@ -1536,116 +1644,102 @@
DPRINTK("EXIT\n");
}
-/**
- * ata_host_set_pio -
- * @ap:
- *
- * LOCKING:
- */
-
-static void ata_host_set_pio(struct ata_port *ap)
+static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift)
{
struct ata_device *master, *slave;
- unsigned int pio, i;
- u16 mask;
+ unsigned int mask;
master = &ap->device[0];
slave = &ap->device[1];
assert (ata_dev_present(master) || ata_dev_present(slave));
- mask = ap->pio_mask;
- if (ata_dev_present(master))
- mask &= (master->id[ATA_ID_PIO_MODES] & 0x03);
- if (ata_dev_present(slave))
- mask &= (slave->id[ATA_ID_PIO_MODES] & 0x03);
-
- /* require pio mode 3 or 4 support for host and all devices */
- if (mask == 0) {
- printk(KERN_WARNING "ata%u: no PIO3/4 support, ignoring\n",
- ap->id);
- goto err_out;
+ if (shift == ATA_SHIFT_UDMA) {
+ mask = ap->udma_mask;
+ if (ata_dev_present(master))
+ mask &= (master->id[ATA_ID_UDMA_MODES] & 0xff);
+ if (ata_dev_present(slave))
+ mask &= (slave->id[ATA_ID_UDMA_MODES] & 0xff);
+ }
+ else if (shift == ATA_SHIFT_MWDMA) {
+ mask = ap->mwdma_mask;
+ if (ata_dev_present(master))
+ mask &= (master->id[ATA_ID_MWDMA_MODES] & 0x07);
+ if (ata_dev_present(slave))
+ mask &= (slave->id[ATA_ID_MWDMA_MODES] & 0x07);
+ }
+ else if (shift == ATA_SHIFT_PIO) {
+ mask = ap->pio_mask;
+ if (ata_dev_present(master)) {
+ /* spec doesn't return explicit support for
+ * PIO0-2, so we fake it
+ */
+ u16 tmp_mode = master->id[ATA_ID_PIO_MODES] & 0x03;
+ tmp_mode <<= 3;
+ tmp_mode |= 0x7;
+ mask &= tmp_mode;
+ }
+ if (ata_dev_present(slave)) {
+ /* spec doesn't return explicit support for
+ * PIO0-2, so we fake it
+ */
+ u16 tmp_mode = slave->id[ATA_ID_PIO_MODES] & 0x03;
+ tmp_mode <<= 3;
+ tmp_mode |= 0x7;
+ mask &= tmp_mode;
+ }
+ }
+ else {
+ mask = 0xffffffff; /* shut up compiler warning */
+ BUG();
}
- pio = (mask & ATA_ID_PIO4) ? 4 : 3;
- for (i = 0; i < ATA_MAX_DEVICES; i++)
- if (ata_dev_present(&ap->device[i])) {
- ap->device[i].pio_mode = (pio == 3) ?
- XFER_PIO_3 : XFER_PIO_4;
- if (ap->ops->set_piomode)
- ap->ops->set_piomode(ap, &ap->device[i], pio);
- }
+ return mask;
+}
- return;
+/* find greatest bit */
+static int fgb(u32 bitmap)
+{
+ unsigned int i;
+ int x = -1;
-err_out:
- ap->ops->port_disable(ap);
+ for (i = 0; i < 32; i++)
+ if (bitmap & (1 << i))
+ x = i;
+
+ return x;
}
/**
- * ata_host_set_udma -
+ * ata_choose_xfer_mode -
* @ap:
*
* LOCKING:
+ *
+ * RETURNS:
+ * Zero on success, negative on error.
*/
-static void ata_host_set_udma(struct ata_port *ap)
-{
- struct ata_device *master, *slave;
- u16 mask;
- unsigned int i, j;
- int udma_mode = -1;
-
- master = &ap->device[0];
- slave = &ap->device[1];
-
- assert (ata_dev_present(master) || ata_dev_present(slave));
- assert ((ap->flags & ATA_FLAG_PORT_DISABLED) == 0);
-
- DPRINTK("udma masks: host 0x%X, master 0x%X, slave 0x%X\n",
- ap->udma_mask,
- (!ata_dev_present(master)) ? 0xff :
- (master->id[ATA_ID_UDMA_MODES] & 0xff),
- (!ata_dev_present(slave)) ? 0xff :
- (slave->id[ATA_ID_UDMA_MODES] & 0xff));
-
- mask = ap->udma_mask;
- if (ata_dev_present(master))
- mask &= (master->id[ATA_ID_UDMA_MODES] & 0xff);
- if (ata_dev_present(slave))
- mask &= (slave->id[ATA_ID_UDMA_MODES] & 0xff);
-
- i = XFER_UDMA_7;
- while (i >= XFER_UDMA_0) {
- j = i - XFER_UDMA_0;
- DPRINTK("mask 0x%X i 0x%X j %u\n", mask, i, j);
- if (mask & (1 << j)) {
- udma_mode = i;
- break;
+static int ata_choose_xfer_mode(struct ata_port *ap,
+ u8 *xfer_mode_out,
+ unsigned int *xfer_shift_out)
+{
+ unsigned int mask, shift;
+ int x, i;
+
+ for (i = 0; i < ARRAY_SIZE(xfer_mode_classes); i++) {
+ shift = xfer_mode_classes[i].shift;
+ mask = ata_get_mode_mask(ap, shift);
+
+ x = fgb(mask);
+ if (x >= 0) {
+ *xfer_mode_out = xfer_mode_classes[i].base + x;
+ *xfer_shift_out = shift;
+ return 0;
}
-
- i--;
- }
-
- /* require udma for host and all attached devices */
- if (udma_mode < 0) {
- printk(KERN_WARNING "ata%u: no UltraDMA support, ignoring\n",
- ap->id);
- goto err_out;
}
- for (i = 0; i < ATA_MAX_DEVICES; i++)
- if (ata_dev_present(&ap->device[i])) {
- ap->device[i].udma_mode = udma_mode;
- if (ap->ops->set_udmamode)
- ap->ops->set_udmamode(ap, &ap->device[i],
- udma_mode);
- }
-
- return;
-
-err_out:
- ap->ops->port_disable(ap);
+ return -1;
}
/**
@@ -1658,89 +1752,39 @@
static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev)
{
- struct ata_taskfile tf;
+ DECLARE_COMPLETION(wait);
+ struct ata_queued_cmd *qc;
+ int rc;
+ unsigned long flags;
/* set up set-features taskfile */
DPRINTK("set features - xfer mode\n");
- ata_tf_init(ap, &tf, dev->devno);
- tf.ctl |= ATA_NIEN;
- tf.command = ATA_CMD_SET_FEATURES;
- tf.feature = SETFEATURES_XFER;
- tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
- tf.protocol = ATA_PROT_NODATA;
- if (dev->flags & ATA_DFLAG_PIO)
- tf.nsect = dev->pio_mode;
- else
- tf.nsect = dev->udma_mode;
- /* do bus reset */
- ata_tf_to_host(ap, &tf);
+ qc = ata_qc_new_init(ap, dev);
+ BUG_ON(qc == NULL);
- /* crazy ATAPI devices... */
- if (dev->class == ATA_DEV_ATAPI)
- msleep(150);
+ qc->tf.command = ATA_CMD_SET_FEATURES;
+ qc->tf.feature = SETFEATURES_XFER;
+ qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ qc->tf.protocol = ATA_PROT_NODATA;
+ qc->tf.nsect = dev->xfer_mode;
- ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+ qc->waiting = &wait;
+ qc->complete_fn = ata_qc_complete_noop;
- ata_irq_on(ap); /* re-enable interrupts */
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ rc = ata_qc_issue(qc);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
- ata_wait_idle(ap);
+ if (rc)
+ ata_port_disable(ap);
+ else
+ wait_for_completion(&wait);
DPRINTK("EXIT\n");
}
/**
- * ata_dev_set_udma - Set ATA device's transfer mode to Ultra DMA
- * @ap: Port associated with device @dev
- * @device: Device whose mode will be set
- *
- * LOCKING:
- */
-
-static void ata_dev_set_udma(struct ata_port *ap, unsigned int device)
-{
- struct ata_device *dev = &ap->device[device];
-
- if (!ata_dev_present(dev) || (ap->flags & ATA_FLAG_PORT_DISABLED))
- return;
-
- ata_dev_set_xfermode(ap, dev);
-
- assert((dev->udma_mode >= XFER_UDMA_0) &&
- (dev->udma_mode <= XFER_UDMA_7));
- printk(KERN_INFO "ata%u: dev %u configured for %s\n",
- ap->id, device,
- udma_str[dev->udma_mode - XFER_UDMA_0]);
-}
-
-/**
- * ata_dev_set_pio - Set ATA device's transfer mode to PIO
- * @ap: Port associated with device @dev
- * @device: Device whose mode will be set
- *
- * LOCKING:
- */
-
-static void ata_dev_set_pio(struct ata_port *ap, unsigned int device)
-{
- struct ata_device *dev = &ap->device[device];
-
- if (!ata_dev_present(dev) || (ap->flags & ATA_FLAG_PORT_DISABLED))
- return;
-
- /* force PIO mode */
- dev->flags |= ATA_DFLAG_PIO;
-
- ata_dev_set_xfermode(ap, dev);
-
- assert((dev->pio_mode >= XFER_PIO_3) &&
- (dev->pio_mode <= XFER_PIO_4));
- printk(KERN_INFO "ata%u: dev %u configured for PIO%c\n",
- ap->id, device,
- dev->pio_mode == 3 ? '3' : '4');
-}
-
-/**
* ata_sg_clean -
* @qc:
*
@@ -2003,7 +2047,7 @@
}
drv_stat = ata_wait_idle(ap);
- if (drv_stat & (ATA_BUSY | ATA_DRQ)) {
+ if (!ata_ok(drv_stat)) {
ap->pio_task_state = PIO_ST_ERR;
return;
}
@@ -2018,6 +2062,43 @@
ata_qc_complete(qc, drv_stat);
}
+static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf,
+ unsigned int buflen, int write_data)
+{
+ unsigned int i;
+ unsigned int words = buflen >> 1;
+ u16 *buf16 = (u16 *) buf;
+ void *mmio = (void *)ap->ioaddr.data_addr;
+
+ if (write_data) {
+ for (i = 0; i < words; i++)
+ writew(buf16[i], mmio);
+ } else {
+ for (i = 0; i < words; i++)
+ buf16[i] = readw(mmio);
+ }
+}
+
+static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf,
+ unsigned int buflen, int write_data)
+{
+ unsigned int dwords = buflen >> 2;
+
+ if (write_data)
+ outsl(ap->ioaddr.data_addr, buf, dwords);
+ else
+ insl(ap->ioaddr.data_addr, buf, dwords);
+}
+
+static void ata_data_xfer(struct ata_port *ap, unsigned char *buf,
+ unsigned int buflen, int do_write)
+{
+ if (ap->flags & ATA_FLAG_MMIO)
+ ata_mmio_data_xfer(ap, buf, buflen, do_write);
+ else
+ ata_pio_data_xfer(ap, buf, buflen, do_write);
+}
+
/**
* ata_pio_sector -
* @ap:
@@ -2032,6 +2113,7 @@
struct page *page;
unsigned char *buf;
u8 status;
+ int do_write;
/*
* This is purely hueristic. This is a fast path.
@@ -2073,26 +2155,41 @@
qc->cursect++;
qc->cursg_ofs++;
- if (qc->flags & ATA_QCFLAG_SG)
- if ((qc->cursg_ofs * ATA_SECT_SIZE) == sg_dma_len(&sg[qc->cursg])) {
- qc->cursg++;
- qc->cursg_ofs = 0;
- }
+ if ((qc->cursg_ofs * ATA_SECT_SIZE) == sg_dma_len(&sg[qc->cursg])) {
+ qc->cursg++;
+ qc->cursg_ofs = 0;
+ }
DPRINTK("data %s, drv_stat 0x%X\n",
qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read",
status);
/* do the actual data transfer */
- /* FIXME: mmio-ize */
- if (qc->tf.flags & ATA_TFLAG_WRITE)
- outsl(ap->ioaddr.data_addr, buf, ATA_SECT_DWORDS);
- else
- insl(ap->ioaddr.data_addr, buf, ATA_SECT_DWORDS);
+ do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
+ ata_data_xfer(ap, buf, ATA_SECT_SIZE, do_write);
kunmap(page);
}
+static void ata_pio_error(struct ata_port *ap)
+{
+ struct ata_queued_cmd *qc;
+ u8 drv_stat;
+
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ assert(qc != NULL);
+
+ drv_stat = ata_chk_status(ap);
+ printk(KERN_WARNING "ata%u: PIO error, drv_stat 0x%x\n",
+ ap->id, drv_stat);
+
+ ap->pio_task_state = PIO_ST_IDLE;
+
+ ata_irq_on(ap);
+
+ ata_qc_complete(qc, drv_stat | ATA_ERR);
+}
+
static void ata_pio_task(void *_data)
{
struct ata_port *ap = _data;
@@ -2113,15 +2210,8 @@
break;
case PIO_ST_TMOUT:
- printk(KERN_ERR "ata%d: FIXME: PIO_ST_TMOUT\n", /* FIXME */
- ap->id);
- timeout = 11 * HZ;
- break;
-
case PIO_ST_ERR:
- printk(KERN_ERR "ata%d: FIXME: PIO_ST_ERR\n", /* FIXME */
- ap->id);
- timeout = 11 * HZ;
+ ata_pio_error(ap);
break;
}
@@ -2180,7 +2270,6 @@
/* fall through */
- case ATA_PROT_NODATA:
default:
ata_altstatus(ap);
drv_stat = ata_chk_status(ap);
@@ -2287,8 +2376,6 @@
ata_tf_init(ap, &qc->tf, dev->devno);
- if (likely((dev->flags & ATA_DFLAG_PIO) == 0))
- qc->flags |= ATA_QCFLAG_DMA;
if (dev->flags & ATA_DFLAG_LBA48)
qc->tf.flags |= ATA_TFLAG_LBA48;
}
@@ -2296,6 +2383,11 @@
return qc;
}
+static int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat)
+{
+ return 0;
+}
+
/**
* ata_qc_complete - Complete an active ATA command
* @qc: Command to complete
@@ -2335,11 +2427,16 @@
do_clear = 1;
}
- if (qc->waiting)
- complete(qc->waiting);
+ if (qc->waiting) {
+ struct completion *waiting = qc->waiting;
+ qc->waiting = NULL;
+ complete(waiting);
+ }
if (likely(do_clear))
clear_bit(tag, &ap->qactive);
+
+ VPRINTK("EXIT\n");
}
/**
@@ -2422,6 +2519,12 @@
break;
case ATA_PROT_ATAPI:
+ ata_qc_set_polling(qc);
+ ata_tf_to_host_nolock(ap, &qc->tf);
+ queue_work(ata_wq, &ap->packet_task);
+ break;
+
+ case ATA_PROT_ATAPI_NODATA:
ata_tf_to_host_nolock(ap, &qc->tf);
queue_work(ata_wq, &ap->packet_task);
break;
@@ -2581,7 +2684,7 @@
case ATA_PROT_ATAPI:
/* check status of DMA engine */
host_stat = ata_bmdma_status(ap);
- VPRINTK("BUS_DMA (host_stat 0x%X)\n", host_stat);
+ VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat);
/* if it's not our irq... */
if (!(host_stat & ATA_DMA_INTR))
@@ -2592,6 +2695,7 @@
/* fall through */
+ case ATA_PROT_ATAPI_NODATA:
case ATA_PROT_NODATA:
/* check altstatus */
status = ata_altstatus(ap);
@@ -2602,7 +2706,8 @@
status = ata_chk_status(ap);
if (unlikely(status & ATA_BUSY))
goto idle_irq;
- DPRINTK("BUS_NODATA (dev_stat 0x%X)\n", status);
+ DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
+ ap->id, qc->tf.protocol, status);
/* ack bmdma irq events */
ata_bmdma_ack_irq(ap);
@@ -2701,21 +2806,20 @@
/* make sure DRQ is set */
status = ata_chk_status(ap);
- if ((status & ATA_DRQ) == 0)
+ if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ)
goto err_out;
/* send SCSI cdb */
- /* FIXME: mmio-ize */
DPRINTK("send cdb\n");
- outsl(ap->ioaddr.data_addr,
- qc->scsicmd->cmnd, ap->host->max_cmd_len / 4);
+ assert(ap->cdb_len >= 12);
+ ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1);
/* if we are DMA'ing, irq handler takes over from here */
if (qc->tf.protocol == ATA_PROT_ATAPI_DMA)
ap->ops->bmdma_start(qc); /* initiate bmdma */
/* non-data commands are also handled via irq */
- else if (qc->scsicmd->sc_data_direction == SCSI_DATA_NONE) {
+ else if (qc->tf.protocol == ATA_PROT_ATAPI_NODATA) {
/* do nothing */
}
@@ -2804,11 +2908,11 @@
ap->host_set = host_set;
ap->port_no = port_no;
ap->pio_mask = ent->pio_mask;
+ ap->mwdma_mask = ent->mwdma_mask;
ap->udma_mask = ent->udma_mask;
ap->flags |= ent->host_flags;
ap->ops = ent->port_ops;
ap->cbl = ATA_CBL_NONE;
- ap->device[0].flags = ATA_DFLAG_MASTER;
ap->active_tag = ATA_TAG_POISON;
ap->last_ctl = 0xFF;
@@ -2901,19 +3005,23 @@
/* register each port bound to this device */
for (i = 0; i < ent->n_ports; i++) {
struct ata_port *ap;
+ unsigned long xfer_mode_mask;
ap = ata_host_add(ent, host_set, i);
if (!ap)
goto err_out;
host_set->ports[i] = ap;
+ xfer_mode_mask =(ap->udma_mask << ATA_SHIFT_UDMA) |
+ (ap->mwdma_mask << ATA_SHIFT_MWDMA) |
+ (ap->pio_mask << ATA_SHIFT_PIO);
/* print per-port info to dmesg */
printk(KERN_INFO "ata%u: %cATA max %s cmd 0x%lX ctl 0x%lX "
"bmdma 0x%lX irq %lu\n",
ap->id,
ap->flags & ATA_FLAG_SATA ? 'S' : 'P',
- ata_udma_string(ent->udma_mask),
+ ata_mode_string(xfer_mode_mask),
ap->ioaddr.cmd_addr,
ap->ioaddr.ctl_addr,
ap->ioaddr.bmdma_addr,
@@ -3152,6 +3260,7 @@
probe_ent->sht = port0->sht;
probe_ent->host_flags = port0->host_flags;
probe_ent->pio_mask = port0->pio_mask;
+ probe_ent->mwdma_mask = port0->mwdma_mask;
probe_ent->udma_mask = port0->udma_mask;
probe_ent->port_ops = port0->port_ops;
@@ -3174,6 +3283,7 @@
probe_ent2->sht = port1->sht;
probe_ent2->host_flags = port1->host_flags;
probe_ent2->pio_mask = port1->pio_mask;
+ probe_ent2->mwdma_mask = port1->mwdma_mask;
probe_ent2->udma_mask = port1->udma_mask;
probe_ent2->port_ops = port1->port_ops;
} else {
diff -Nru a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
--- a/drivers/scsi/libata-scsi.c 2004-08-04 17:53:32 -07:00
+++ b/drivers/scsi/libata-scsi.c 2004-08-04 17:53:32 -07:00
@@ -339,14 +339,10 @@
{
struct scsi_cmnd *cmd = qc->scsicmd;
- if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ))) {
- if (is_atapi_taskfile(&qc->tf))
- cmd->result = SAM_STAT_CHECK_CONDITION;
- else
- ata_to_sense_error(qc);
- } else {
+ if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ)))
+ ata_to_sense_error(qc);
+ else
cmd->result = SAM_STAT_GOOD;
- }
qc->scsidone(cmd);
@@ -964,6 +960,31 @@
done(cmd);
}
+static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
+{
+ struct scsi_cmnd *cmd = qc->scsicmd;
+
+ if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ)))
+ cmd->result = SAM_STAT_CHECK_CONDITION;
+ else {
+ u8 *scsicmd = cmd->cmnd;
+
+ if (scsicmd[0] == INQUIRY) {
+ u8 *buf = NULL;
+ unsigned int buflen;
+
+ buflen = ata_scsi_rbuf_get(cmd, &buf);
+ buf[2] = 0x5;
+ buf[3] = (buf[3] & 0xf0) | 2;
+ ata_scsi_rbuf_put(cmd);
+ }
+ cmd->result = SAM_STAT_GOOD;
+ }
+
+ qc->scsidone(cmd);
+
+ return 0;
+}
/**
* atapi_xlat - Initialize PACKET taskfile
* @qc: command structure to be initialized
@@ -979,6 +1000,13 @@
static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd)
{
struct scsi_cmnd *cmd = qc->scsicmd;
+ struct ata_device *dev = qc->dev;
+ int using_pio = (dev->flags & ATA_DFLAG_PIO);
+ int nodata = (cmd->sc_data_direction == SCSI_DATA_NONE);
+
+ memcpy(&qc->cdb, scsicmd, qc->ap->cdb_len);
+
+ qc->complete_fn = atapi_qc_complete;
qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
if (cmd->sc_data_direction == SCSI_DATA_WRITE) {
@@ -988,19 +1016,18 @@
qc->tf.command = ATA_CMD_PACKET;
- /* no data - interrupt-driven */
- if (cmd->sc_data_direction == SCSI_DATA_NONE)
- qc->tf.protocol = ATA_PROT_ATAPI;
-
- /* PIO data xfer - polling */
- else if ((qc->flags & ATA_QCFLAG_DMA) == 0) {
- ata_qc_set_polling(qc);
- qc->tf.protocol = ATA_PROT_ATAPI;
+ /* no data, or PIO data xfer */
+ if (using_pio || nodata) {
+ if (nodata)
+ qc->tf.protocol = ATA_PROT_ATAPI_NODATA;
+ else
+ qc->tf.protocol = ATA_PROT_ATAPI;
qc->tf.lbam = (8 * 1024) & 0xff;
qc->tf.lbah = (8 * 1024) >> 8;
+ }
- /* DMA data xfer - interrupt-driven */
- } else {
+ /* DMA data xfer */
+ else {
qc->tf.protocol = ATA_PROT_ATAPI_DMA;
qc->tf.feature |= ATAPI_PKT_DMA;
diff -Nru a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
--- a/drivers/scsi/sata_nv.c 2004-08-04 17:53:32 -07:00
+++ b/drivers/scsi/sata_nv.c 2004-08-04 17:53:32 -07:00
@@ -39,6 +39,7 @@
#define NV_PORTS 2
#define NV_PIO_MASK 0x1f
+#define NV_MWDMA_MASK 0x07
#define NV_UDMA_MASK 0x7f
#define NV_PORT0_BMDMA_REG_OFFSET 0x00
#define NV_PORT1_BMDMA_REG_OFFSET 0x08
@@ -289,6 +290,7 @@
probe_ent->irq = pdev->irq;
probe_ent->irq_flags = SA_SHIRQ;
probe_ent->pio_mask = NV_PIO_MASK;
+ probe_ent->mwdma_mask = NV_MWDMA_MASK;
probe_ent->udma_mask = NV_UDMA_MASK;
probe_ent->port[0].cmd_addr = pci_resource_start(pdev, 0);
diff -Nru a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
--- a/drivers/scsi/sata_promise.c 2004-08-04 17:53:32 -07:00
+++ b/drivers/scsi/sata_promise.c 2004-08-04 17:53:32 -07:00
@@ -74,7 +74,6 @@
static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
-static void pdc_dma_start(struct ata_queued_cmd *qc);
static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
static void pdc_eng_timeout(struct ata_port *ap);
static int pdc_port_start(struct ata_port *ap);
@@ -83,8 +82,6 @@
static void pdc_qc_prep(struct ata_queued_cmd *qc);
static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf);
static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf);
-static inline void pdc_dma_complete (struct ata_port *ap,
- struct ata_queued_cmd *qc, int have_err);
static void pdc_irq_clear(struct ata_port *ap);
static int pdc_qc_issue_prot(struct ata_queued_cmd *qc);
@@ -130,7 +127,8 @@
.sht = &pdc_sata_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_SRST | ATA_FLAG_MMIO,
- .pio_mask = 0x03, /* pio3-4 */
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &pdc_sata_ops,
},
@@ -140,7 +138,8 @@
.sht = &pdc_sata_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_SRST | ATA_FLAG_MMIO,
- .pio_mask = 0x03, /* pio3-4 */
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &pdc_sata_ops,
},
@@ -269,26 +268,26 @@
VPRINTK("ENTER\n");
- ata_qc_prep(qc);
-
- i = pdc_pkt_header(&qc->tf, qc->ap->prd_dma, qc->dev->devno, pp->pkt);
+ switch (qc->tf.protocol) {
+ case ATA_PROT_DMA:
+ ata_qc_prep(qc);
+ /* fall through */
- if (qc->tf.flags & ATA_TFLAG_LBA48)
- i = pdc_prep_lba48(&qc->tf, pp->pkt, i);
- else
- i = pdc_prep_lba28(&qc->tf, pp->pkt, i);
+ case ATA_PROT_NODATA:
+ i = pdc_pkt_header(&qc->tf, qc->ap->prd_dma,
+ qc->dev->devno, pp->pkt);
- pdc_pkt_footer(&qc->tf, pp->pkt, i);
-}
+ if (qc->tf.flags & ATA_TFLAG_LBA48)
+ i = pdc_prep_lba48(&qc->tf, pp->pkt, i);
+ else
+ i = pdc_prep_lba28(&qc->tf, pp->pkt, i);
-static inline void pdc_dma_complete (struct ata_port *ap,
- struct ata_queued_cmd *qc,
- int have_err)
-{
- u8 err_bit = have_err ? ATA_ERR : 0;
+ pdc_pkt_footer(&qc->tf, pp->pkt, i);
+ break;
- /* get drive status; clear intr; complete txn */
- ata_qc_complete(qc, ata_wait_idle(ap) | err_bit);
+ default:
+ break;
+ }
}
static void pdc_eng_timeout(struct ata_port *ap)
@@ -315,17 +314,9 @@
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
- printk(KERN_ERR "ata%u: DMA timeout\n", ap->id);
- ata_qc_complete(qc, ata_wait_idle(ap) | ATA_ERR);
- break;
-
case ATA_PROT_NODATA:
- drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
-
- printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x\n",
- ap->id, qc->tf.command, drv_stat);
-
- ata_qc_complete(qc, drv_stat);
+ printk(KERN_ERR "ata%u: command timeout\n", ap->id);
+ ata_qc_complete(qc, ata_wait_idle(ap) | ATA_ERR);
break;
default:
@@ -358,13 +349,8 @@
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
- pdc_dma_complete(ap, qc, have_err);
- handled = 1;
- break;
-
- case ATA_PROT_NODATA: /* command completion, but no data xfer */
- status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
- DPRINTK("BUS_NODATA (drv_stat 0x%X)\n", status);
+ case ATA_PROT_NODATA:
+ status = ata_wait_idle(ap);
if (have_err)
status |= ATA_ERR;
ata_qc_complete(qc, status);
@@ -440,7 +426,7 @@
return IRQ_RETVAL(handled);
}
-static inline void pdc_dma_start(struct ata_queued_cmd *qc)
+static inline void pdc_packet_start(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct pdc_port_priv *pp = ap->private_data;
@@ -462,7 +448,8 @@
{
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
- pdc_dma_start(qc);
+ case ATA_PROT_NODATA:
+ pdc_packet_start(qc);
return 0;
case ATA_PROT_ATAPI_DMA:
@@ -478,14 +465,16 @@
static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf)
{
- WARN_ON (tf->protocol == ATA_PROT_DMA);
+ WARN_ON (tf->protocol == ATA_PROT_DMA ||
+ tf->protocol == ATA_PROT_NODATA);
ata_tf_load_mmio(ap, tf);
}
static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf)
{
- WARN_ON (tf->protocol == ATA_PROT_DMA);
+ WARN_ON (tf->protocol == ATA_PROT_DMA ||
+ tf->protocol == ATA_PROT_NODATA);
ata_exec_command_mmio(ap, tf);
}
@@ -539,8 +528,7 @@
writel(tmp, mmio + PDC_TBG_MODE);
readl(mmio + PDC_TBG_MODE); /* flush */
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(msecs_to_jiffies(10) + 1);
+ msleep(10);
/* adjust slew rate control register. */
tmp = readl(mmio + PDC_SLEW_CTL);
@@ -601,6 +589,7 @@
probe_ent->sht = pdc_port_info[board_idx].sht;
probe_ent->host_flags = pdc_port_info[board_idx].host_flags;
probe_ent->pio_mask = pdc_port_info[board_idx].pio_mask;
+ probe_ent->mwdma_mask = pdc_port_info[board_idx].mwdma_mask;
probe_ent->udma_mask = pdc_port_info[board_idx].udma_mask;
probe_ent->port_ops = pdc_port_info[board_idx].port_ops;
diff -Nru a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
--- a/drivers/scsi/sata_sil.c 2004-08-04 17:53:32 -07:00
+++ b/drivers/scsi/sata_sil.c 2004-08-04 17:53:32 -07:00
@@ -149,7 +149,8 @@
.sht = &sil_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_SRST | ATA_FLAG_MMIO,
- .pio_mask = 0x03, /* pio3-4 */
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil_ops,
}, /* sil_3114 */
@@ -157,7 +158,8 @@
.sht = &sil_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_SRST | ATA_FLAG_MMIO,
- .pio_mask = 0x03, /* pio3-4 */
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil_ops,
},
@@ -363,6 +365,7 @@
probe_ent->sht = sil_port_info[ent->driver_data].sht;
probe_ent->n_ports = (ent->driver_data == sil_3114) ? 4 : 2;
probe_ent->pio_mask = sil_port_info[ent->driver_data].pio_mask;
+ probe_ent->mwdma_mask = sil_port_info[ent->driver_data].mwdma_mask;
probe_ent->udma_mask = sil_port_info[ent->driver_data].udma_mask;
probe_ent->irq = pdev->irq;
probe_ent->irq_flags = SA_SHIRQ;
diff -Nru a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c
--- a/drivers/scsi/sata_sis.c 2004-08-04 17:53:32 -07:00
+++ b/drivers/scsi/sata_sis.c 2004-08-04 17:53:32 -07:00
@@ -230,7 +230,8 @@
probe_ent->host_flags |= SIS_FLAG_CFGSCR;
}
- probe_ent->pio_mask = 0x03;
+ probe_ent->pio_mask = 0x1f;
+ probe_ent->mwdma_mask = 0x7;
probe_ent->udma_mask = 0x7f;
probe_ent->port_ops = &sis_ops;
diff -Nru a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
--- a/drivers/scsi/sata_svw.c 2004-08-04 17:53:32 -07:00
+++ b/drivers/scsi/sata_svw.c 2004-08-04 17:53:32 -07:00
@@ -343,6 +343,7 @@
* if we don't fill these
*/
probe_ent->pio_mask = 0x1f;
+ probe_ent->mwdma_mask = 0x7;
probe_ent->udma_mask = 0x7f;
/* We have 4 ports per PCI function */
diff -Nru a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
--- a/drivers/scsi/sata_sx4.c 2004-08-04 17:53:32 -07:00
+++ b/drivers/scsi/sata_sx4.c 2004-08-04 17:53:32 -07:00
@@ -146,8 +146,6 @@
static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
-static void pdc20621_dma_setup(struct ata_queued_cmd *qc);
-static void pdc20621_dma_start(struct ata_queued_cmd *qc);
static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
static void pdc_eng_timeout(struct ata_port *ap);
static void pdc_20621_phy_reset (struct ata_port *ap);
@@ -157,8 +155,6 @@
static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf);
static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf);
static void pdc20621_host_stop(struct ata_host_set *host_set);
-static inline void pdc_dma_complete (struct ata_port *ap,
- struct ata_queued_cmd *qc, int have_err);
static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe);
static int pdc20621_detect_dimm(struct ata_probe_ent *pe);
static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe,
@@ -172,6 +168,7 @@
static void pdc20621_put_to_dimm(struct ata_probe_ent *pe,
void *psource, u32 offset, u32 size);
static void pdc20621_irq_clear(struct ata_port *ap);
+static int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc);
static Scsi_Host_Template pdc_sata_sht = {
@@ -199,10 +196,8 @@
.check_status = ata_check_status_mmio,
.exec_command = pdc_exec_command_mmio,
.phy_reset = pdc_20621_phy_reset,
- .bmdma_setup = pdc20621_dma_setup,
- .bmdma_start = pdc20621_dma_start,
.qc_prep = pdc20621_qc_prep,
- .qc_issue = ata_qc_issue_prot,
+ .qc_issue = pdc20621_qc_issue_prot,
.eng_timeout = pdc_eng_timeout,
.irq_handler = pdc20621_interrupt,
.irq_clear = pdc20621_irq_clear,
@@ -217,7 +212,8 @@
.sht = &pdc_sata_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_SRST | ATA_FLAG_MMIO,
- .pio_mask = 0x03, /* pio3-4 */
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &pdc_20621_ops,
},
@@ -377,7 +373,10 @@
/* dimm dma S/G, and next-pkt */
dw = i >> 2;
- buf32[dw] = cpu_to_le32(dimm_sg);
+ if (tf->protocol == ATA_PROT_NODATA)
+ buf32[dw] = 0;
+ else
+ buf32[dw] = cpu_to_le32(dimm_sg);
buf32[dw + 1] = 0;
i += 8;
@@ -437,7 +436,7 @@
buf32[dw + 3]);
}
-static void pdc20621_qc_prep(struct ata_queued_cmd *qc)
+static void pdc20621_dma_prep(struct ata_queued_cmd *qc)
{
struct scatterlist *sg = qc->sg;
struct ata_port *ap = qc->ap;
@@ -449,8 +448,7 @@
unsigned int i, last, idx, total_len = 0, sgt_len;
u32 *buf = (u32 *) &pp->dimm_buf[PDC_DIMM_HEADER_SZ];
- if (!(qc->flags & ATA_QCFLAG_DMAMAP))
- return;
+ assert(qc->flags & ATA_QCFLAG_DMAMAP);
VPRINTK("ata%u: ENTER\n", ap->id);
@@ -501,6 +499,56 @@
VPRINTK("ata pkt buf ofs %u, prd size %u, mmio copied\n", i, sgt_len);
}
+static void pdc20621_nodata_prep(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct pdc_port_priv *pp = ap->private_data;
+ void *mmio = ap->host_set->mmio_base;
+ struct pdc_host_priv *hpriv = ap->host_set->private_data;
+ void *dimm_mmio = hpriv->dimm_mmio;
+ unsigned int portno = ap->port_no;
+ unsigned int i;
+
+ VPRINTK("ata%u: ENTER\n", ap->id);
+
+ /* hard-code chip #0 */
+ mmio += PDC_CHIP0_OFS;
+
+ i = pdc20621_ata_pkt(&qc->tf, qc->dev->devno, &pp->dimm_buf[0], portno);
+
+ if (qc->tf.flags & ATA_TFLAG_LBA48)
+ i = pdc_prep_lba48(&qc->tf, &pp->dimm_buf[0], i);
+ else
+ i = pdc_prep_lba28(&qc->tf, &pp->dimm_buf[0], i);
+
+ pdc_pkt_footer(&qc->tf, &pp->dimm_buf[0], i);
+
+ /* copy three S/G tables and two packets to DIMM MMIO window */
+ memcpy_toio(dimm_mmio + (portno * PDC_DIMM_WINDOW_STEP),
+ &pp->dimm_buf, PDC_DIMM_HEADER_SZ);
+
+ /* force host FIFO dump */
+ writel(0x00000001, mmio + PDC_20621_GENERAL_CTL);
+
+ readl(dimm_mmio); /* MMIO PCI posting flush */
+
+ VPRINTK("ata pkt buf ofs %u, prd size %u, mmio copied\n", i, sgt_len);
+}
+
+static void pdc20621_qc_prep(struct ata_queued_cmd *qc)
+{
+ switch (qc->tf.protocol) {
+ case ATA_PROT_DMA:
+ pdc20621_dma_prep(qc);
+ break;
+ case ATA_PROT_NODATA:
+ pdc20621_nodata_prep(qc);
+ break;
+ default:
+ break;
+ }
+}
+
static void __pdc20621_push_hdma(struct ata_queued_cmd *qc,
unsigned int seq,
u32 pkt_ofs)
@@ -576,13 +624,7 @@
static inline void pdc20621_dump_hdma(struct ata_queued_cmd *qc) { }
#endif /* ATA_VERBOSE_DEBUG */
-static void pdc20621_dma_setup(struct ata_queued_cmd *qc)
-{
- /* nothing for now. later, we will call standard
- * code in libata-core for ATAPI here */
-}
-
-static void pdc20621_dma_start(struct ata_queued_cmd *qc)
+static void pdc20621_packet_start(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_host_set *host_set = ap->host_set;
@@ -590,24 +632,21 @@
void *mmio = host_set->mmio_base;
unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
u8 seq = (u8) (port_no + 1);
- unsigned int doing_hdma = 0, port_ofs;
+ unsigned int port_ofs;
/* hard-code chip #0 */
mmio += PDC_CHIP0_OFS;
VPRINTK("ata%u: ENTER\n", ap->id);
+ wmb(); /* flush PRD, pkt writes */
+
port_ofs = PDC_20621_DIMM_BASE + (PDC_DIMM_WINDOW_STEP * port_no);
/* if writing, we (1) DMA to DIMM, then (2) do ATA command */
- if (rw) {
- doing_hdma = 1;
+ if (rw && qc->tf.protocol == ATA_PROT_DMA) {
seq += 4;
- }
- wmb(); /* flush PRD, pkt writes */
-
- if (doing_hdma) {
pdc20621_dump_hdma(qc);
pdc20621_push_hdma(qc, seq, port_ofs + PDC_DIMM_HOST_PKT);
VPRINTK("queued ofs 0x%x (%u), seq %u\n",
@@ -628,6 +667,25 @@
}
}
+static int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc)
+{
+ switch (qc->tf.protocol) {
+ case ATA_PROT_DMA:
+ case ATA_PROT_NODATA:
+ pdc20621_packet_start(qc);
+ return 0;
+
+ case ATA_PROT_ATAPI_DMA:
+ BUG();
+ break;
+
+ default:
+ break;
+ }
+
+ return ata_qc_issue_prot(qc);
+}
+
static inline unsigned int pdc20621_host_intr( struct ata_port *ap,
struct ata_queued_cmd *qc,
unsigned int doing_hdma,
@@ -648,7 +706,8 @@
if (doing_hdma) {
VPRINTK("ata%u: read hdma, 0x%x 0x%x\n", ap->id,
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
- pdc_dma_complete(ap, qc, 0);
+ /* get drive status; clear intr; complete txn */
+ ata_qc_complete(qc, ata_wait_idle(ap));
pdc20621_pop_hdma(qc);
}
@@ -685,7 +744,8 @@
else {
VPRINTK("ata%u: write ata, 0x%x 0x%x\n", ap->id,
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
- pdc_dma_complete(ap, qc, 0);
+ /* get drive status; clear intr; complete txn */
+ ata_qc_complete(qc, ata_wait_idle(ap));
pdc20621_pop_hdma(qc);
}
handled = 1;
@@ -779,16 +839,6 @@
return IRQ_RETVAL(handled);
}
-static inline void pdc_dma_complete (struct ata_port *ap,
- struct ata_queued_cmd *qc,
- int have_err)
-{
- u8 err_bit = have_err ? ATA_ERR : 0;
-
- /* get drive status; clear intr; complete txn */
- ata_qc_complete(qc, ata_wait_idle(ap) | err_bit);
-}
-
static void pdc_eng_timeout(struct ata_port *ap)
{
u8 drv_stat;
@@ -813,17 +863,9 @@
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
- printk(KERN_ERR "ata%u: DMA timeout\n", ap->id);
- ata_qc_complete(qc, ata_wait_idle(ap) | ATA_ERR);
- break;
-
case ATA_PROT_NODATA:
- drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
-
- printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x\n",
- ap->id, qc->tf.command, drv_stat);
-
- ata_qc_complete(qc, drv_stat);
+ printk(KERN_ERR "ata%u: command timeout\n", ap->id);
+ ata_qc_complete(qc, ata_wait_idle(ap) | ATA_ERR);
break;
default:
@@ -842,15 +884,17 @@
static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf)
{
- if (tf->protocol != ATA_PROT_DMA)
- ata_tf_load_mmio(ap, tf);
+ WARN_ON (tf->protocol == ATA_PROT_DMA ||
+ tf->protocol == ATA_PROT_NODATA);
+ ata_tf_load_mmio(ap, tf);
}
static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf)
{
- if (tf->protocol != ATA_PROT_DMA)
- ata_exec_command_mmio(ap, tf);
+ WARN_ON (tf->protocol == ATA_PROT_DMA ||
+ tf->protocol == ATA_PROT_NODATA);
+ ata_exec_command_mmio(ap, tf);
}
@@ -1384,6 +1428,7 @@
probe_ent->sht = pdc_port_info[board_idx].sht;
probe_ent->host_flags = pdc_port_info[board_idx].host_flags;
probe_ent->pio_mask = pdc_port_info[board_idx].pio_mask;
+ probe_ent->mwdma_mask = pdc_port_info[board_idx].mwdma_mask;
probe_ent->udma_mask = pdc_port_info[board_idx].udma_mask;
probe_ent->port_ops = pdc_port_info[board_idx].port_ops;
@@ -1394,21 +1439,11 @@
probe_ent->private_data = hpriv;
base += PDC_CHIP0_OFS;
+ probe_ent->n_ports = 4;
pdc_sata_setup_port(&probe_ent->port[0], base + 0x200);
pdc_sata_setup_port(&probe_ent->port[1], base + 0x280);
-
- /* notice 4-port boards */
- switch (board_idx) {
- case board_20621:
- probe_ent->n_ports = 4;
-
- pdc_sata_setup_port(&probe_ent->port[2], base + 0x300);
- pdc_sata_setup_port(&probe_ent->port[3], base + 0x380);
- break;
- default:
- BUG();
- break;
- }
+ pdc_sata_setup_port(&probe_ent->port[2], base + 0x300);
+ pdc_sata_setup_port(&probe_ent->port[3], base + 0x380);
pci_set_master(pdev);
diff -Nru a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
--- a/drivers/scsi/sata_via.c 2004-08-04 17:53:32 -07:00
+++ b/drivers/scsi/sata_via.c 2004-08-04 17:53:32 -07:00
@@ -214,6 +214,7 @@
probe_ent->irq = pdev->irq;
probe_ent->irq_flags = SA_SHIRQ;
probe_ent->pio_mask = 0x1f;
+ probe_ent->mwdma_mask = 0x07;
probe_ent->udma_mask = 0x7f;
probe_ent->port[0].cmd_addr = pci_resource_start(pdev, 0);
diff -Nru a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
--- a/drivers/scsi/sata_vsc.c 2004-08-04 17:53:32 -07:00
+++ b/drivers/scsi/sata_vsc.c 2004-08-04 17:53:32 -07:00
@@ -320,6 +320,7 @@
* if we don't fill these
*/
probe_ent->pio_mask = 0x1f;
+ probe_ent->mwdma_mask = 0x07;
probe_ent->udma_mask = 0x7f;
/* We have 4 ports per PCI function */
diff -Nru a/include/linux/ata.h b/include/linux/ata.h
--- a/include/linux/ata.h 2004-08-04 17:53:32 -07:00
+++ b/include/linux/ata.h 2004-08-04 17:53:32 -07:00
@@ -42,6 +42,7 @@
ATA_ID_SERNO_OFS = 10,
ATA_ID_MAJOR_VER = 80,
ATA_ID_PIO_MODES = 64,
+ ATA_ID_MWDMA_MODES = 63,
ATA_ID_UDMA_MODES = 88,
ATA_ID_PIO4 = (1 << 1),
@@ -133,13 +134,20 @@
XFER_UDMA_2 = 0x42,
XFER_UDMA_1 = 0x41,
XFER_UDMA_0 = 0x40,
+ XFER_MW_DMA_2 = 0x22,
+ XFER_MW_DMA_1 = 0x21,
+ XFER_MW_DMA_0 = 0x20,
XFER_PIO_4 = 0x0C,
XFER_PIO_3 = 0x0B,
+ XFER_PIO_2 = 0x0A,
+ XFER_PIO_1 = 0x09,
+ XFER_PIO_0 = 0x08,
/* ATAPI stuff */
ATAPI_PKT_DMA = (1 << 0),
ATAPI_DMADIR = (1 << 2), /* ATAPI data dir:
0=to device, 1=to host */
+ ATAPI_CDB_LEN = 16,
/* cable types */
ATA_CBL_NONE = 0,
@@ -169,7 +177,8 @@
ATA_PROT_PIO, /* PIO single sector */
ATA_PROT_PIO_MULT, /* PIO multiple sector */
ATA_PROT_DMA, /* DMA */
- ATA_PROT_ATAPI, /* packet command */
+ ATA_PROT_ATAPI, /* packet command, PIO data xfer*/
+ ATA_PROT_ATAPI_NODATA, /* packet command, no data */
ATA_PROT_ATAPI_DMA, /* packet command with special DMA sauce */
};
@@ -220,9 +229,20 @@
((u64) dev->id[(n) + 1] << 16) | \
((u64) dev->id[(n) + 0]) )
+static inline int atapi_cdb_len(u16 *dev_id)
+{
+ u16 tmp = dev_id[0] & 0x3;
+ switch (tmp) {
+ case 0: return 12;
+ case 1: return 16;
+ default: return -1;
+ }
+}
+
static inline int is_atapi_taskfile(struct ata_taskfile *tf)
{
return (tf->protocol == ATA_PROT_ATAPI) ||
+ (tf->protocol == ATA_PROT_ATAPI_NODATA) ||
(tf->protocol == ATA_PROT_ATAPI_DMA);
}
diff -Nru a/include/linux/libata.h b/include/linux/libata.h
--- a/include/linux/libata.h 2004-08-04 17:53:32 -07:00
+++ b/include/linux/libata.h 2004-08-04 17:53:32 -07:00
@@ -32,7 +32,6 @@
/*
* compile-time options
*/
-#undef ATA_FORCE_PIO /* do not configure or use DMA */
#undef ATA_DEBUG /* debugging output */
#undef ATA_VERBOSE_DEBUG /* yet more debugging output */
#undef ATA_IRQ_TRAP /* define to ack screaming irqs */
@@ -88,10 +87,7 @@
/* struct ata_device stuff */
ATA_DFLAG_LBA48 = (1 << 0), /* device supports LBA48 */
ATA_DFLAG_PIO = (1 << 1), /* device currently in PIO mode */
- ATA_DFLAG_MASTER = (1 << 2), /* is device 0? */
- ATA_DFLAG_WCACHE = (1 << 3), /* has write cache we can
- * (hopefully) flush? */
- ATA_DFLAG_LOCK_SECTORS = (1 << 4), /* don't adjust max_sectors */
+ ATA_DFLAG_LOCK_SECTORS = (1 << 2), /* don't adjust max_sectors */
ATA_DEV_UNKNOWN = 0, /* unknown device */
ATA_DEV_ATA = 1, /* ATA device */
@@ -111,7 +107,6 @@
ATA_FLAG_SATA_RESET = (1 << 7), /* use COMRESET */
ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */
- ATA_QCFLAG_DMA = (1 << 2), /* data delivered via DMA */
ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */
ATA_QCFLAG_SINGLE = (1 << 4), /* no s/g, just a single buffer */
ATA_QCFLAG_DMAMAP = ATA_QCFLAG_SG | ATA_QCFLAG_SINGLE,
@@ -140,6 +135,13 @@
PORT_UNKNOWN = 0,
PORT_ENABLED = 1,
PORT_DISABLED = 2,
+
+ /* encoding various smaller bitmaps into a single
+ * unsigned long bitmap
+ */
+ ATA_SHIFT_UDMA = 0,
+ ATA_SHIFT_MWDMA = 8,
+ ATA_SHIFT_PIO = 11,
};
enum pio_task_states {
@@ -188,6 +190,7 @@
struct ata_ioports port[ATA_MAX_PORTS];
unsigned int n_ports;
unsigned int pio_mask;
+ unsigned int mwdma_mask;
unsigned int udma_mask;
unsigned int legacy_mode;
unsigned long irq;
@@ -215,6 +218,9 @@
struct scsi_cmnd *scsicmd;
void (*scsidone)(struct scsi_cmnd *);
+ struct ata_taskfile tf;
+ u8 cdb[ATAPI_CDB_LEN];
+
unsigned long flags; /* ATA_QCFLAG_xxx */
unsigned int tag;
unsigned int n_elem;
@@ -226,7 +232,6 @@
unsigned int cursg;
unsigned int cursg_ofs;
- struct ata_taskfile tf;
struct scatterlist sgent;
void *buf_virt;
@@ -251,8 +256,10 @@
unsigned int class; /* ATA_DEV_xxx */
unsigned int devno; /* 0 or 1 */
u16 id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */
- unsigned int pio_mode;
- unsigned int udma_mode;
+ u8 pio_mode;
+ u8 dma_mode;
+ u8 xfer_mode;
+ unsigned int xfer_shift; /* ATA_SHIFT_xxx */
/* cache info about current transfer mode */
u8 xfer_protocol; /* taskfile xfer protocol */
@@ -277,8 +284,10 @@
unsigned int bus_state;
unsigned int port_state;
unsigned int pio_mask;
+ unsigned int mwdma_mask;
unsigned int udma_mask;
unsigned int cbl; /* cable type; ATA_CBL_xxx */
+ unsigned int cdb_len;
struct ata_device device[ATA_MAX_DEVICES];
@@ -303,10 +312,8 @@
void (*dev_config) (struct ata_port *, struct ata_device *);
- void (*set_piomode) (struct ata_port *, struct ata_device *,
- unsigned int);
- void (*set_udmamode) (struct ata_port *, struct ata_device *,
- unsigned int);
+ void (*set_piomode) (struct ata_port *, struct ata_device *);
+ void (*set_dmamode) (struct ata_port *, struct ata_device *);
void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
@@ -342,6 +349,7 @@
Scsi_Host_Template *sht;
unsigned long host_flags;
unsigned long pio_mask;
+ unsigned long mwdma_mask;
unsigned long udma_mask;
struct ata_port_operations *port_ops;
};
@@ -472,7 +480,6 @@
static inline void ata_qc_set_polling(struct ata_queued_cmd *qc)
{
- qc->flags &= ~ATA_QCFLAG_DMA;
qc->tf.ctl |= ATA_NIEN;
}