From: Adrian Bunk <bunk@fs.tum.de>
CC drivers/char/mxser.o
drivers/char/mxser.c: In function `mxser_interrupt':
drivers/char/mxser.c:352: sorry, unimplemented: inlining failed in call
to 'mxser_receive_chars': function body not available
drivers/char/mxser.c:1347: sorry, unimplemented: called from here
drivers/char/mxser.c:354: sorry, unimplemented: inlining failed in call
to 'mxser_check_modem_status': function body not available
drivers/char/mxser.c:1350: sorry, unimplemented: called from here
drivers/char/mxser.c:353: sorry, unimplemented: inlining failed in call
to 'mxser_transmit_chars': function body not available
drivers/char/mxser.c:1355: sorry, unimplemented: called from here
make[2]: *** [drivers/char/mxser.o] Error 1
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
---
25-akpm/drivers/char/mxser.c | 128 +++++++++++++++++++++----------------------
1 files changed, 64 insertions(+), 64 deletions(-)
diff -puN drivers/char/mxser.c~mxserc-fix-inlines-fwd drivers/char/mxser.c
--- 25/drivers/char/mxser.c~mxserc-fix-inlines-fwd 2004-07-31 00:07:53.919795968 -0700
+++ 25-akpm/drivers/char/mxser.c 2004-07-31 00:09:37.704018368 -0700
@@ -349,10 +349,10 @@ static void mxser_set_termios(struct tty
static void mxser_stop(struct tty_struct *);
static void mxser_start(struct tty_struct *);
static void mxser_hangup(struct tty_struct *);
-static irqreturn_t mxser_interrupt(int, void *, struct pt_regs *);
static inline void mxser_receive_chars(struct mxser_struct *, int *);
static inline void mxser_transmit_chars(struct mxser_struct *);
static inline void mxser_check_modem_status(struct mxser_struct *, int);
+static irqreturn_t mxser_interrupt(int, void *, struct pt_regs *);
static int mxser_block_til_ready(struct tty_struct *, struct file *, struct mxser_struct *);
static int mxser_startup(struct mxser_struct *);
static void mxser_shutdown(struct mxser_struct *);
@@ -1307,69 +1307,6 @@ void mxser_hangup(struct tty_struct *tty
wake_up_interruptible(&info->open_wait);
}
-/*
- * This is the serial driver's generic interrupt routine
- */
-static irqreturn_t mxser_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
- int status, i;
- struct mxser_struct *info;
- struct mxser_struct *port;
- int max, irqbits, bits, msr;
- int pass_counter = 0;
- int handled = 0;
-
- port = NULL;
- for (i = 0; i < MXSER_BOARDS; i++) {
- if (dev_id == &(mxvar_table[i * MXSER_PORTS_PER_BOARD])) {
- port = dev_id;
- break;
- }
- }
-
- if (i == MXSER_BOARDS)
- return IRQ_NONE;
- if (port == 0)
- return IRQ_NONE;
- max = mxser_numports[mxsercfg[i].board_type];
-
- while (1) {
- irqbits = inb(port->vector) & port->vectormask;
- if (irqbits == port->vectormask)
- break;
- handled = 1;
- for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) {
- if (irqbits == port->vectormask)
- break;
- if (bits & irqbits)
- continue;
- info = port + i;
- if (!info->tty ||
- (inb(info->base + UART_IIR) & UART_IIR_NO_INT))
- continue;
- status = inb(info->base + UART_LSR) & info->read_status_mask;
- if (status & UART_LSR_DR)
- mxser_receive_chars(info, &status);
- msr = inb(info->base + UART_MSR);
- if (msr & UART_MSR_ANY_DELTA)
- mxser_check_modem_status(info, msr);
- if (status & UART_LSR_THRE) {
-/* 8-2-99 by William
- if ( info->x_char || (info->xmit_cnt > 0) )
- */
- mxser_transmit_chars(info);
- }
- }
- if (pass_counter++ > MXSER_ISR_PASS_LIMIT) {
-#if 0
- printk("MOXA Smartio/Indusrtio family driver interrupt loop break\n");
-#endif
- break; /* Prevent infinite loops */
- }
- }
- return IRQ_RETVAL(handled);
-}
-
static inline void mxser_receive_chars(struct mxser_struct *info,
int *status)
{
@@ -1490,6 +1427,69 @@ static inline void mxser_check_modem_sta
}
}
+/*
+ * This is the serial driver's generic interrupt routine
+ */
+static irqreturn_t mxser_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ int status, i;
+ struct mxser_struct *info;
+ struct mxser_struct *port;
+ int max, irqbits, bits, msr;
+ int pass_counter = 0;
+ int handled = 0;
+
+ port = NULL;
+ for (i = 0; i < MXSER_BOARDS; i++) {
+ if (dev_id == &(mxvar_table[i * MXSER_PORTS_PER_BOARD])) {
+ port = dev_id;
+ break;
+ }
+ }
+
+ if (i == MXSER_BOARDS)
+ return IRQ_NONE;
+ if (port == 0)
+ return IRQ_NONE;
+ max = mxser_numports[mxsercfg[i].board_type];
+
+ while (1) {
+ irqbits = inb(port->vector) & port->vectormask;
+ if (irqbits == port->vectormask)
+ break;
+ handled = 1;
+ for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) {
+ if (irqbits == port->vectormask)
+ break;
+ if (bits & irqbits)
+ continue;
+ info = port + i;
+ if (!info->tty ||
+ (inb(info->base + UART_IIR) & UART_IIR_NO_INT))
+ continue;
+ status = inb(info->base + UART_LSR) & info->read_status_mask;
+ if (status & UART_LSR_DR)
+ mxser_receive_chars(info, &status);
+ msr = inb(info->base + UART_MSR);
+ if (msr & UART_MSR_ANY_DELTA)
+ mxser_check_modem_status(info, msr);
+ if (status & UART_LSR_THRE) {
+/* 8-2-99 by William
+ if ( info->x_char || (info->xmit_cnt > 0) )
+ */
+ mxser_transmit_chars(info);
+ }
+ }
+ if (pass_counter++ > MXSER_ISR_PASS_LIMIT) {
+#if 0
+ printk("MOXA Smartio/Indusrtio family driver interrupt loop break\n");
+#endif
+ break; /* Prevent infinite loops */
+ }
+ }
+ return IRQ_RETVAL(handled);
+}
+
static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp,
struct mxser_struct *info)
{
_