From: Michael Hunold <hunold@linuxtv.org>
- [DVB] new driver for mobile USB Budget DVB-T devices, thanks to Patrick
Boettcher
Signed-off-by: Michael Hunold <hunold@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
---
25-akpm/drivers/media/dvb/Makefile | 3
25-akpm/drivers/media/dvb/dibusb/Kconfig | 31 +
25-akpm/drivers/media/dvb/dibusb/Makefile | 3
25-akpm/drivers/media/dvb/dibusb/dvb-dibusb.c | 719 ++++++++++++++++++++++++++
25-akpm/drivers/media/dvb/dibusb/dvb-dibusb.h | 175 ++++++
25-akpm/drivers/media/dvb/frontends/Kconfig | 46 +
6 files changed, 965 insertions(+), 12 deletions(-)
diff -puN /dev/null drivers/media/dvb/dibusb/dvb-dibusb.c
--- /dev/null 2003-09-15 06:40:47.000000000 -0700
+++ 25-akpm/drivers/media/dvb/dibusb/dvb-dibusb.c 2004-09-20 11:22:37.730914992 -0700
@@ -0,0 +1,719 @@
+/*
+ * Driver for mobile USB Budget DVB-T devices based on reference
+ * design made by DiBcom (http://www.dibcom.fr/)
+ *
+ * dvb-dibusb.c
+ *
+ * Copyright (C) 2004 Patrick Boettcher (patrick.boettcher@desy.de)
+ *
+ * based on GPL code from DiBcom, which has
+ *
+ * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr)
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ *
+ * Acknowledgements
+ *
+ * Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver
+ * sources, on which this driver (and the dib3000mb frontend) are based.
+ *
+ * TODO
+ * - probing for i2c addresses, it is possible, that they have been changed
+ * by the vendor
+ *
+ * see Documentation/dvb/README.dibusb for more information
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/usb.h>
+#include <linux/firmware.h>
+#include <linux/version.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+
+#include "dmxdev.h"
+#include "dvb_demux.h"
+#include "dvb_filter.h"
+#include "dvb_net.h"
+#include "dvb_frontend.h"
+
+#include "dvb-dibusb.h"
+
+/* debug */
+
+#ifdef CONFIG_DVB_DIBCOM_DEBUG
+#define dprintk_new(level,args...) \
+ do { if ((debug & level)) { printk(args); } } while (0)
+
+#define debug_dump(b,l) if (debug) {\
+ int i; deb_xfer("%s: %d > ",__FUNCTION__,l); \
+ for (i = 0; i < l; i++) deb_xfer("%02x ", b[i]); \
+ deb_xfer("\n");\
+}
+
+static int debug;
+module_param(debug, int, 0x644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info,2=xfer,4=alotmore (|-able)).");
+#else
+#define dprintk_new(args...)
+#define debug_dump(b,l)
+#endif
+
+#define deb_info(args...) dprintk_new(0x01,args)
+#define deb_xfer(args...) dprintk_new(0x02,args)
+#define deb_alot(args...) dprintk_new(0x04,args)
+
+/* Version information */
+#define DRIVER_VERSION "0.0"
+#define DRIVER_DESC "DiBcom based USB Budget DVB-T device"
+#define DRIVER_AUTHOR "Patrick Boettcher, patrick.boettcher@desy.de"
+
+/* USB Driver stuff */
+
+/* table of devices that work with this driver */
+static struct usb_device_id dibusb_table [] = {
+ { USB_DEVICE(USB_TWINHAN_VENDOR_ID, USB_VP7041_PRODUCT_PREFW_ID) },
+ { USB_DEVICE(USB_TWINHAN_VENDOR_ID, USB_VP7041_PRODUCT_ID) },
+ { USB_DEVICE(USB_IMC_NETWORKS_VENDOR_ID, USB_VP7041_PRODUCT_PREFW_ID) },
+ { USB_DEVICE(USB_IMC_NETWORKS_VENDOR_ID, USB_VP7041_PRODUCT_ID) },
+ { USB_DEVICE(USB_KWORLD_VENDOR_ID, USB_VSTREAM_PRODUCT_PREFW_ID) },
+ { USB_DEVICE(USB_KWORLD_VENDOR_ID, USB_VSTREAM_PRODUCT_ID) },
+ { USB_DEVICE(USB_DIBCOM_VENDOR_ID, USB_DIBCOM_PRODUCT_PREFW_ID) },
+ { USB_DEVICE(USB_DIBCOM_VENDOR_ID, USB_DIBCOM_PRODUCT_ID) },
+ { USB_DEVICE(USB_ULTIMA_ELECTRONIC_ID, USB_ULTIMA_ELEC_PROD_PREFW_ID) },
+ { USB_DEVICE(USB_ULTIMA_ELECTRONIC_ID, USB_ULTIMA_ELEC_PROD_ID) },
+ { } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE (usb, dibusb_table);
+
+static int dibusb_readwrite_usb(struct usb_dibusb *dib,
+ u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
+{
+ int actlen,ret = -ENOMEM;
+
+ if (wbuf == NULL || wlen == 0)
+ return -EINVAL;
+
+/* if (dib->disconnecting)
+ return -EINVAL;*/
+
+ if ((ret = down_interruptible(&dib->usb_sem)))
+ return ret;
+
+ debug_dump(wbuf,wlen);
+
+ ret = usb_bulk_msg(dib->udev,COMMAND_PIPE,
+ wbuf,wlen,&actlen,DIBUSB_I2C_TIMEOUT);
+
+ if (ret)
+ err("bulk message failed: %d (%d/%d)",ret,wlen,actlen);
+ else
+ ret = actlen != wlen ? -1 : 0;
+
+ /* an answer is expected */
+ if (!ret && rbuf && rlen) {
+ ret = usb_bulk_msg(dib->udev,RESULT_PIPE,rbuf,rlen,
+ &actlen,DIBUSB_I2C_TIMEOUT);
+
+ if (ret)
+ err("recv bulk message failed: %d",ret);
+ else {
+ deb_alot("rlen: %d\n",rlen);
+ debug_dump(rbuf,actlen);
+ }
+ }
+
+ up(&dib->usb_sem);
+ return ret;
+}
+
+static int dibusb_write_usb(struct usb_dibusb *dib, u8 *buf, u16 len)
+{
+ return dibusb_readwrite_usb(dib,buf,len,NULL,0);
+}
+
+static int dibusb_i2c_msg(struct usb_dibusb *dib, u8 addr,
+ u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
+{
+ u8 sndbuf[wlen+4]; /* lead(1) devaddr,direction(1) addr(2) data(wlen) (len(2) (when reading)) */
+ /* write only ? */
+ int wo = (rbuf == NULL || rlen == 0),
+ len = 2 + wlen + (wo ? 0 : 2);
+
+ deb_alot("wo: %d, wlen: %d, len: %d\n",wo,wlen,len);
+
+ sndbuf[0] = wo ? DIBUSB_REQ_I2C_WRITE : DIBUSB_REQ_I2C_READ;
+ sndbuf[1] = (addr & 0xfe) | (wo ? 0 : 1);
+
+ memcpy(&sndbuf[2],wbuf,wlen);
+
+ if (!wo) {
+ sndbuf[wlen+2] = (rlen >> 8) & 0xff;
+ sndbuf[wlen+3] = rlen & 0xff;
+ }
+
+ return dibusb_readwrite_usb(dib,sndbuf,len,rbuf,rlen);
+}
+
+/*
+ * DVB stuff
+ */
+
+static struct dibusb_pid * dibusb_get_free_pid(struct usb_dibusb *dib)
+{
+ int i;
+ unsigned long flags;
+ struct dibusb_pid *dpid = NULL;
+
+ spin_lock_irqsave(&dib->pid_list_lock,flags);
+ for (i=0; i < DIBUSB_MAX_PIDS; i++)
+ if (!dib->pid_list[i].active) {
+ dpid = dib->pid_list + i;
+ dpid->active = 1;
+ break;
+ }
+ spin_unlock_irqrestore(&dib->pid_list_lock,flags);
+ return dpid;
+}
+
+static int dibusb_start_xfer(struct usb_dibusb *dib)
+{
+ u8 b[4] = {
+ (DIB3000MB_REG_FIFO >> 8) & 0xff,
+ (DIB3000MB_REG_FIFO) & 0xff,
+ (DIB3000MB_FIFO_ACTIVATE >> 8) & 0xff,
+ (DIB3000MB_FIFO_ACTIVATE) & 0xff
+ };
+ return dibusb_i2c_msg(dib,DIBUSB_DEMOD_I2C_ADDR_DEFAULT,b,4,NULL,0);
+}
+
+static int dibusb_stop_xfer(struct usb_dibusb *dib)
+{
+ u8 b[4] = {
+ (DIB3000MB_REG_FIFO >> 8) & 0xff,
+ (DIB3000MB_REG_FIFO) & 0xff,
+ (DIB3000MB_FIFO_INHIBIT >> 8) & 0xff,
+ (DIB3000MB_FIFO_INHIBIT) & 0xff
+ };
+ return dibusb_i2c_msg(dib,DIBUSB_DEMOD_I2C_ADDR_DEFAULT,b,4,NULL,0);
+}
+
+static int dibusb_set_pid(struct dibusb_pid *dpid)
+{
+ u16 pid = dpid->pid | (dpid->active ? DIB3000MB_ACTIVATE_FILTERING : 0);
+ u8 b[4] = {
+ (dpid->reg >> 8) & 0xff,
+ (dpid->reg) & 0xff,
+ (pid >> 8) & 0xff,
+ (pid) & 0xff
+ };
+
+ return dibusb_i2c_msg(dpid->dib,DIBUSB_DEMOD_I2C_ADDR_DEFAULT,b,4,NULL,0);
+}
+
+static void dibusb_urb_complete(struct urb *urb, struct pt_regs *ptregs)
+{
+ struct usb_dibusb *dib = urb->context;
+
+ if (!dib->streaming)
+ return;
+
+ if (urb->status == 0) {
+ deb_info("URB return len: %d\n",urb->actual_length);
+ if (urb->actual_length % 188)
+ deb_info("TS Packets: %d, %d\n", urb->actual_length/188,urb->actual_length % 188);
+ dvb_dmx_swfilter_packets(&dib->demux, (u8*) urb->transfer_buffer,urb->actual_length/188);
+ }
+
+ if (dib->streaming)
+ usb_submit_urb(urb,GFP_KERNEL);
+}
+
+
+static int dibusb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+// struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
+ struct usb_dibusb *dib = dvbdmxfeed->demux->priv;
+ struct dibusb_pid *dpid;
+ int ret = 0;
+
+ deb_info("pid: 0x%04x, feedtype: %d\n", dvbdmxfeed->pid,dvbdmxfeed->type);
+
+ if ((dpid = dibusb_get_free_pid(dib)) == NULL) {
+ err("no free pid in list.");
+ return -ENODEV;
+ }
+ dvbdmxfeed->priv = dpid;
+ dpid->pid = dvbdmxfeed->pid;
+
+ dibusb_set_pid(dpid);
+
+ if (0 == dib->feed_count++) {
+ usb_fill_bulk_urb( dib->buf_urb, dib->udev, DATA_PIPE,
+ dib->buffer, 8192, dibusb_urb_complete, dib);
+ dib->buf_urb->transfer_flags = 0;
+
+
+ if ((ret = usb_submit_urb(dib->buf_urb,GFP_KERNEL))) {
+ dibusb_stop_xfer(dib);
+ err("could not submit buffer urb.");
+ return ret;
+ }
+
+ if ((ret = dibusb_start_xfer(dib)))
+ return ret;
+
+ dib->streaming = 1;
+ }
+ return 0;
+}
+
+static int dibusb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct usb_dibusb *dib = dvbdmxfeed->demux->priv;
+ struct dibusb_pid *dpid = (struct dibusb_pid *) dvbdmxfeed->priv;
+
+ deb_info("stopfeed pid: 0x%04x, feedtype: %d",dvbdmxfeed->pid, dvbdmxfeed->type);
+
+ if (dpid == NULL)
+ err("channel in dmxfeed->priv was NULL");
+ else {
+ dpid->active = 0;
+ dpid->pid = 0;
+ dibusb_set_pid(dpid);
+ }
+
+ if (--dib->feed_count == 0) {
+ dib->streaming = 0;
+ usb_unlink_urb(dib->buf_urb);
+ dibusb_stop_xfer(dib);
+ }
+ return 0;
+}
+
+/*
+ * firmware transfers
+ */
+
+/*
+ * do not use this, just a workaround for a bug,
+ * which will never occur :).
+ */
+static int dibusb_interrupt_read_loop(struct usb_dibusb *dib)
+{
+ u8 b[1] = { DIBUSB_REQ_INTR_READ };
+ return dibusb_write_usb(dib,b,1);
+}
+
+/*
+ * TODO: a tasklet should run with a delay of 1/10 second
+ * and fill an appropriate event device ?
+ */
+static int dibusb_read_remote_control(struct usb_dibusb *dib)
+{
+ u8 b[1] = { DIBUSB_REQ_POLL_REMOTE }, rb[5];
+ int ret;
+ if ((ret = dibusb_readwrite_usb(dib,b,1,rb,5)))
+ return ret;
+
+ return 0;
+}
+
+/*
+ * ioctl for the firmware
+ */
+static int dibusb_ioctl_cmd(struct usb_dibusb *dib, u8 cmd, u8 *param, int plen)
+{
+ u8 b[34];
+ int size = plen > 32 ? 32 : plen;
+ b[0] = DIBUSB_REQ_SET_IOCTL;
+ b[1] = cmd;
+ memcpy(&b[2],param,size);
+
+ return dibusb_write_usb(dib,b,2+size);
+}
+
+/*
+ * ioctl for power control
+ */
+static int dibusb_hw_sleep(struct usb_dibusb *dib)
+{
+ u8 b[1] = { DIBUSB_IOCTL_POWER_SLEEP };
+ return dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_POWER_MODE, b,1);
+}
+
+static int dibusb_hw_wakeup(struct usb_dibusb *dib)
+{
+ u8 b[1] = { DIBUSB_IOCTL_POWER_WAKEUP };
+ return dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_POWER_MODE, b,1);
+}
+
+/*
+ * I2C
+ */
+static int dibusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
+{
+ struct usb_dibusb *dib = i2c_get_adapdata(adap);
+ int i;
+
+ if (down_interruptible(&dib->i2c_sem) < 0)
+ return -EAGAIN;
+
+ for (i = 0; i < num; i++) {
+ /* write/read request */
+ if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
+ if (dibusb_i2c_msg(dib, msg[i].addr, msg[i].buf,msg[i].len,
+ msg[i+1].buf,msg[i+1].len) < 0)
+ break;
+ i++;
+ } else
+ if (dibusb_i2c_msg(dib, msg[i].addr, msg[i].buf,msg[i].len,NULL,0) < 0)
+ break;
+ }
+
+ up(&dib->i2c_sem);
+ return i;
+}
+
+static u32 dibusb_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static int dibusb_i2c_client_register (struct i2c_client *i2c)
+{
+ struct usb_dibusb *dib = i2c_get_adapdata(i2c->adapter);
+ if (i2c->driver->command)
+ return i2c->driver->command(i2c,FE_REGISTER,dib->adapter);
+ return 0;
+}
+
+static int dibusb_i2c_client_unregister (struct i2c_client *i2c)
+{
+ struct usb_dibusb *dib = i2c_get_adapdata(i2c->adapter);
+ if (i2c->driver->command)
+ return i2c->driver->command(i2c,FE_UNREGISTER,dib->adapter);
+ return 0;
+}
+
+static struct i2c_algorithm dibusb_algo = {
+ .name = "DiBcom USB i2c algorithm",
+ .id = I2C_ALGO_BIT,
+ .master_xfer = dibusb_i2c_xfer,
+ .functionality = dibusb_i2c_func,
+};
+
+static int dibusb_dvb_init(struct usb_dibusb *dib)
+{
+ int ret;
+
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,4)
+ if ((ret = dvb_register_adapter(&dib->adapter, DRIVER_DESC)) < 0) {
+#else
+ if ((ret = dvb_register_adapter(&dib->adapter, DRIVER_DESC ,
+ THIS_MODULE)) < 0) {
+#endif
+ deb_info("dvb_register_adapter failed: error %d", ret);
+ goto err;
+ }
+
+ strncpy(dib->i2c_adap.name,dib->dibdev->name,I2C_NAME_SIZE);
+#ifdef I2C_ADAP_CLASS_TV_DIGITAL
+ dib->i2c_adap.class = I2C_ADAP_CLASS_TV_DIGITAL,
+#else
+ dib->i2c_adap.class = I2C_CLASS_TV_DIGITAL,
+#endif
+ dib->i2c_adap.algo = &dibusb_algo;
+ dib->i2c_adap.algo_data = NULL;
+ dib->i2c_adap.id = I2C_ALGO_BIT;
+ dib->i2c_adap.client_register = dibusb_i2c_client_register,
+ dib->i2c_adap.client_unregister = dibusb_i2c_client_unregister,
+
+ i2c_set_adapdata(&dib->i2c_adap, dib);
+
+ if ((i2c_add_adapter(&dib->i2c_adap) < 0)) {
+ err("could not add i2c adapter");
+ goto err_i2c;
+ }
+
+ dib->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING;
+
+ dib->demux.priv = (void *)dib;
+ dib->demux.filternum = DIBUSB_MAX_PIDS;
+ dib->demux.feednum = DIBUSB_MAX_PIDS;
+ dib->demux.start_feed = dibusb_start_feed;
+ dib->demux.stop_feed = dibusb_stop_feed;
+ dib->demux.write_to_decoder = NULL;
+ if ((ret = dvb_dmx_init(&dib->demux)) < 0) {
+ err("dvb_dmx_init failed: error %d",ret);
+ goto err_dmx;
+ }
+
+ dib->dmxdev.filternum = dib->demux.filternum;
+ dib->dmxdev.demux = &dib->demux.dmx;
+ dib->dmxdev.capabilities = 0;
+ if ((ret = dvb_dmxdev_init(&dib->dmxdev, dib->adapter)) < 0) {
+ err("dvb_dmxdev_init failed: error %d",ret);
+ goto err_dmx_dev;
+ }
+
+ dvb_net_init(dib->adapter, &dib->dvb_net, &dib->demux.dmx);
+
+ goto success;
+err_dmx_dev:
+ dvb_dmx_release(&dib->demux);
+err_dmx:
+ i2c_del_adapter(&dib->i2c_adap);
+err_i2c:
+ dvb_unregister_adapter(dib->adapter);
+err:
+ return ret;
+success:
+ return 0;
+}
+
+static int dibusb_dvb_exit(struct usb_dibusb *dib)
+{
+ deb_info("unregistering DVB part\n");
+ dvb_net_release(&dib->dvb_net);
+ dib->demux.dmx.close(&dib->demux.dmx);
+ dvb_dmxdev_release(&dib->dmxdev);
+ dvb_dmx_release(&dib->demux);
+ i2c_del_adapter(&dib->i2c_adap);
+ dvb_unregister_adapter(dib->adapter);
+
+ return 0;
+}
+
+static int dibusb_exit(struct usb_dibusb *dib)
+{
+ usb_free_urb(dib->buf_urb);
+ pci_free_consistent(NULL,8192,dib->buffer,dib->dma_handle);
+ return 0;
+}
+
+static int dibusb_init(struct usb_dibusb *dib)
+{
+ int ret,i;
+ sema_init(&dib->usb_sem, 1);
+ sema_init(&dib->i2c_sem, 1);
+
+ /*
+ * when reloading the driver w/o replugging the device
+ * a timeout occures, this helps
+ */
+ usb_clear_halt(dib->udev,COMMAND_PIPE);
+ usb_clear_halt(dib->udev,RESULT_PIPE);
+ usb_clear_halt(dib->udev,DATA_PIPE);
+
+ /* dibusb_reset_cpu(dib); */
+
+ dib->buffer = pci_alloc_consistent(NULL,8192, &dib->dma_handle);
+ memset(dib->buffer,0,8192);
+ if (!(dib->buf_urb = usb_alloc_urb(0,GFP_KERNEL))) {
+ dibusb_exit(dib);
+ return -ENOMEM;
+ }
+
+ for (i=0; i < DIBUSB_MAX_PIDS; i++) {
+ dib->pid_list[i].reg = i+DIB3000MB_REG_FIRST_PID;
+ dib->pid_list[i].pid = 0;
+ dib->pid_list[i].active = 0;
+ dib->pid_list[i].dib = dib;
+ }
+
+ dib->streaming = 0;
+ dib->feed_count = 0;
+
+ if ((ret = dibusb_dvb_init(dib))) {
+ dibusb_exit(dib);
+ return ret;
+ }
+ return 0;
+}
+
+/*
+ * load a firmware packet to the device
+ */
+static int dibusb_writemem(struct usb_device *udev,u16 addr,u8 *data, u8 len)
+{
+ return usb_control_msg(udev, usb_sndctrlpipe(udev,0),
+ 0xa0, USB_TYPE_VENDOR, addr, 0x00, data, len, 5*HZ);
+}
+
+static int dibusb_loadfirmware(struct usb_device *udev,
+ struct dibusb_device *dibdev)
+{
+ const struct firmware *fw = NULL;
+ u16 addr;
+ u8 *b,*p;
+ int ret = 0,i;
+
+ for (i = 0; i < sizeof(valid_firmware_filenames)/sizeof(const char*); i++) {
+ if ((ret = request_firmware(&fw, valid_firmware_filenames[i], &udev->dev)) == 0) {
+ info("using firmware file (%s).",valid_firmware_filenames[i]);
+ break;
+ }
+ deb_info("tried to find '%s' firmware - unsuccessful. (%d)\n",
+ valid_firmware_filenames[i],ret);
+ }
+
+ if (fw == NULL) {
+ err("did not find a valid firmware file. "
+ "Please see linux/Documentation/dvb/ for more details on firmware-problems.");
+ return -EINVAL;
+ }
+ p = kmalloc(fw->size,GFP_KERNEL);
+ if (p != NULL) {
+ u8 reset;
+ /*
+ * you cannot use the fw->data as buffer for
+ * usb_control_msg, a new buffer has to be
+ * created
+ */
+ memcpy(p,fw->data,fw->size);
+
+ /* stop the CPU */
+ reset = 1;
+ if ((ret = dibusb_writemem(udev,DIBUSB_CPU_CSREG,&reset,1)) != 1)
+ err("could not stop the USB controller CPU.");
+ for(i = 0; p[i+3] == 0 && i < fw->size; ) {
+ b = (u8 *) &p[i];
+ addr = *((u16 *) &b[1]);
+
+ ret = dibusb_writemem(udev,addr,&b[4],b[0]);
+
+ if (ret != b[0]) {
+ err("error while transferring firmware "
+ "(transferred size: %d, block size: %d)",
+ ret,b[1]);
+ ret = -EINVAL;
+ break;
+ }
+ i += 5 + b[0];
+ }
+ /* restart the CPU */
+ reset = 0;
+ if ((ret = dibusb_writemem(udev,DIBUSB_CPU_CSREG,&reset,1)) != 1)
+ err("could not restart the USB controller CPU.");
+
+ kfree(p);
+ ret = 0;
+ } else {
+ ret = -ENOMEM;
+ }
+ release_firmware(fw);
+
+ return ret;
+}
+
+/*
+ * USB
+ */
+static int dibusb_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct usb_dibusb *dib = NULL;
+ struct dibusb_device *dibdev = NULL;
+
+ int ret = -ENOMEM,i,cold=0;
+
+ for (i = 0; i < DIBUSB_SUPPORTED_DEVICES; i++)
+ if (dibusb_devices[i].cold_product_id == udev->descriptor.idProduct ||
+ dibusb_devices[i].warm_product_id == udev->descriptor.idProduct) {
+ dibdev = &dibusb_devices[i];
+
+ cold = dibdev->cold_product_id == udev->descriptor.idProduct;
+
+ if (cold)
+ info("found a '%s' in cold state, will try to load a firmware",dibdev->name);
+ else
+ info("found a '%s' in warm state.",dibdev->name);
+ }
+
+ if (dibdev == NULL) {
+ err("something went very wrong, "
+ "unknown product ID: %.4x",udev->descriptor.idProduct);
+ return -ENODEV;
+ }
+
+ if (cold)
+ ret = dibusb_loadfirmware(udev,dibdev);
+ else {
+ dib = kmalloc(sizeof(struct usb_dibusb),GFP_KERNEL);
+ if (dib == NULL) {
+ err("no memory");
+ return ret;
+ }
+ memset(dib,0,sizeof(struct usb_dibusb));
+
+ dib->udev = udev;
+ dib->dibdev = dibdev;
+
+ usb_set_intfdata(intf, dib);
+
+ ret = dibusb_init(dib);
+ }
+
+ if (ret == 0)
+ info("%s successfully initialized and connected.",dibdev->name);
+ else
+ info("%s error while loading driver (%d)",dibdev->name,ret);
+ return ret;
+}
+
+static void dibusb_disconnect(struct usb_interface *intf)
+{
+ struct usb_dibusb *dib = usb_get_intfdata(intf);
+ const char *name = DRIVER_DESC;
+
+ usb_set_intfdata(intf,NULL);
+ if (dib != NULL) {
+ name = dib->dibdev->name;
+ dibusb_dvb_exit(dib);
+ dibusb_exit(dib);
+ kfree(dib);
+ }
+ info("%s successfully deinitialized and disconnected.",name);
+
+}
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver dibusb_driver = {
+ .owner = THIS_MODULE,
+ .name = "dvb_dibusb",
+ .probe = dibusb_probe,
+ .disconnect = dibusb_disconnect,
+ .id_table = dibusb_table,
+};
+
+/* module stuff */
+static int __init usb_dibusb_init(void)
+{
+ int result;
+ if ((result = usb_register(&dibusb_driver))) {
+ err("usb_register failed. Error number %d",result);
+ return result;
+ }
+
+ return 0;
+}
+
+static void __exit usb_dibusb_exit(void)
+{
+ /* deregister this driver from the USB subsystem */
+ usb_deregister(&dibusb_driver);
+}
+
+module_init (usb_dibusb_init);
+module_exit (usb_dibusb_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff -puN /dev/null drivers/media/dvb/dibusb/dvb-dibusb.h
--- /dev/null 2003-09-15 06:40:47.000000000 -0700
+++ 25-akpm/drivers/media/dvb/dibusb/dvb-dibusb.h 2004-09-20 11:22:37.731914840 -0700
@@ -0,0 +1,175 @@
+/*
+ * dvb-dibusb.h
+ *
+ * Copyright (C) 2004 Patrick Boettcher (patrick.boettcher@desy.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ *
+ *
+ * for more information see dvb-dibusb.c .
+ */
+
+#ifndef __DVB_DIBUSB_H__
+#define __DVB_DIBUSB_H__
+
+/* Vendor IDs */
+#define USB_TWINHAN_VENDOR_ID 0x1822
+#define USB_IMC_NETWORKS_VENDOR_ID 0x13d3
+#define USB_KWORLD_VENDOR_ID 0xeb1a
+#define USB_DIBCOM_VENDOR_ID 0x10b8
+#define USB_ULTIMA_ELECTRONIC_ID 0x05d8
+
+/* Product IDs before loading the firmware */
+#define USB_VP7041_PRODUCT_PREFW_ID 0x3201
+#define USB_VSTREAM_PRODUCT_PREFW_ID 0x17de
+#define USB_DIBCOM_PRODUCT_PREFW_ID 0x0bb8
+#define USB_ULTIMA_ELEC_PROD_PREFW_ID 0x8105
+
+/* product ID afterwards */
+#define USB_VP7041_PRODUCT_ID 0x3202
+#define USB_VSTREAM_PRODUCT_ID 0x17df
+#define USB_DIBCOM_PRODUCT_ID 0x0bb9
+#define USB_ULTIMA_ELEC_PROD_ID 0x8106
+
+/* CS register start/stop the usb controller cpu */
+#define DIBUSB_CPU_CSREG 0x7F92
+
+// 0x10 is the I2C address of the first demodulator on the board
+#define DIBUSB_DEMOD_I2C_ADDR_DEFAULT 0x10
+#define DIBUSB_I2C_TIMEOUT HZ*5
+
+#define DIBUSB_MAX_PIDS 16
+
+#define DIB3000MB_REG_FIRST_PID ( 153)
+
+struct usb_dibusb;
+
+struct dibusb_pid {
+ u16 reg;
+ u16 pid;
+ int active;
+ struct usb_dibusb *dib;
+};
+
+struct usb_dibusb {
+ /* usb */
+ struct usb_device * udev;
+
+ struct dibusb_device * dibdev;
+
+ int streaming;
+ int feed_count;
+ struct urb *buf_urb;
+ u8 *buffer;
+ dma_addr_t dma_handle;
+
+ spinlock_t pid_list_lock;
+ struct dibusb_pid pid_list[DIBUSB_MAX_PIDS];
+
+ /* I2C */
+ struct i2c_adapter i2c_adap;
+ struct i2c_client i2c_client;
+
+ /* locking */
+ struct semaphore usb_sem;
+ struct semaphore i2c_sem;
+
+ /* dvb */
+ struct dvb_adapter *adapter;
+ struct dmxdev dmxdev;
+ struct dvb_demux demux;
+ struct dvb_net dvb_net;
+};
+
+
+struct dibusb_device {
+ u16 cold_product_id;
+ u16 warm_product_id;
+ u8 demod_addr;
+ const char *name;
+};
+
+/* static array of valid firmware names, the best one first */
+static const char * valid_firmware_filenames[] = {
+ "dvb-dibusb-5.0.0.11.fw",
+};
+
+#define DIBUSB_SUPPORTED_DEVICES 4
+
+/* USB Driver stuff */
+static struct dibusb_device dibusb_devices[DIBUSB_SUPPORTED_DEVICES] = {
+ { .cold_product_id = USB_VP7041_PRODUCT_PREFW_ID,
+ .warm_product_id = USB_VP7041_PRODUCT_ID,
+ .name = "Twinhan VisionDTV USB-Ter/HAMA USB DVB-T device",
+ .demod_addr = DIBUSB_DEMOD_I2C_ADDR_DEFAULT,
+ },
+ { .cold_product_id = USB_VSTREAM_PRODUCT_PREFW_ID,
+ .warm_product_id = USB_VSTREAM_PRODUCT_ID,
+ .name = "KWorld V-Stream XPERT DTV - DVB-T USB",
+ .demod_addr = DIBUSB_DEMOD_I2C_ADDR_DEFAULT,
+ },
+ { .cold_product_id = USB_DIBCOM_PRODUCT_PREFW_ID,
+ .warm_product_id = USB_DIBCOM_PRODUCT_ID,
+ .name = "DiBcom USB reference design",
+ .demod_addr = DIBUSB_DEMOD_I2C_ADDR_DEFAULT,
+ },
+ {
+ .cold_product_id = USB_ULTIMA_ELEC_PROD_PREFW_ID,
+ .warm_product_id = USB_ULTIMA_ELEC_PROD_ID,
+ .name = "Ultima Electronic/Artec T1 USB TVBOX",
+ .demod_addr = DIBUSB_DEMOD_I2C_ADDR_DEFAULT,
+ },
+};
+
+#define COMMAND_PIPE usb_sndbulkpipe(dib->udev, 0x01)
+#define RESULT_PIPE usb_rcvbulkpipe(dib->udev, 0x81)
+#define DATA_PIPE usb_rcvbulkpipe(dib->udev, 0x82)
+/*
+ * last endpoint 0x83 only used for chaining the buffers
+ * of the endpoints in the cypress
+ */
+#define CHAIN_PIPE_DO_NOT_USE usb_rcvbulkpipe(dib->udev, 0x83)
+
+/* types of first byte of each buffer */
+
+#define DIBUSB_REQ_START_READ 0x00
+#define DIBUSB_REQ_START_DEMOD 0x01
+#define DIBUSB_REQ_I2C_READ 0x02
+#define DIBUSB_REQ_I2C_WRITE 0x03
+
+/* prefix for reading the current RC key */
+#define DIBUSB_REQ_POLL_REMOTE 0x04
+
+/* 0x05 0xXX */
+#define DIBUSB_REQ_SET_STREAMING_MODE 0x05
+
+/* interrupt the internal read loop, when blocking */
+#define DIBUSB_REQ_INTR_READ 0x06
+
+/* IO control
+ * 0x07 <cmd 1 byte> <param 32 bytes>
+ */
+#define DIBUSB_REQ_SET_IOCTL 0x07
+
+/* IOCTL commands */
+
+/* change the power mode in firmware */
+#define DIBUSB_IOCTL_CMD_POWER_MODE 0x00
+#define DIBUSB_IOCTL_POWER_SLEEP 0x00
+#define DIBUSB_IOCTL_POWER_WAKEUP 0x01
+
+
+/*
+ * values from the demodulator which are needed in
+ * the usb driver as well
+ */
+
+#define DIB3000MB_REG_FIFO ( 145)
+#define DIB3000MB_FIFO_INHIBIT ( 1)
+#define DIB3000MB_FIFO_ACTIVATE ( 0)
+
+#define DIB3000MB_ACTIVATE_FILTERING (0x2000)
+
+#endif
diff -puN /dev/null drivers/media/dvb/dibusb/Kconfig
--- /dev/null 2003-09-15 06:40:47.000000000 -0700
+++ 25-akpm/drivers/media/dvb/dibusb/Kconfig 2004-09-20 11:22:37.731914840 -0700
@@ -0,0 +1,31 @@
+config DVB_DIBUSB
+ tristate "Twinhan/KWorld/Hama/Artec USB DVB-T devices"
+ depends on DVB_CORE && USB
+ select FW_LOADER
+ help
+ Support for USB 1.1 DVB-T devices based on a reference design made by
+ DiBcom (http://www.dibcom.fr).
+
+ Devices supported by this driver:
+
+ Twinhan VisionPlus VisionDTV USB-Ter (VP7041)
+ KWorld V-Stream XPERT DTV - DVB-T USB
+ Hama DVB-T USB-Box
+ DiBcom reference device (non-public)
+ Ultima Electronic/Artec T1 USB TVBOX
+
+ The VP7041 seems to be identical to "CTS Portable" (Chinese
+ Television System).
+
+ These devices can be understood as budget ones, they "only" deliver
+ the MPEG data.
+
+ Currently all known copies of the DiBcom reference design have the DiBcom 3000MB
+ frontend onboard. Please enable and load this one manually in order to use this
+ device.
+
+ A firmware is needed to use the device. See Documentation/dvb/README.dibusb
+ details.
+
+ Say Y if you own such a device and want to use it. You should build it as
+ a module.
diff -puN /dev/null drivers/media/dvb/dibusb/Makefile
--- /dev/null 2003-09-15 06:40:47.000000000 -0700
+++ 25-akpm/drivers/media/dvb/dibusb/Makefile 2004-09-20 11:22:37.731914840 -0700
@@ -0,0 +1,3 @@
+obj-$(CONFIG_DVB_DIBUSB) += dvb-dibusb.o
+
+EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/
diff -puN drivers/media/dvb/frontends/Kconfig~DVB-new-driver-dibusb drivers/media/dvb/frontends/Kconfig
--- 25/drivers/media/dvb/frontends/Kconfig~DVB-new-driver-dibusb 2004-09-20 11:22:37.712917728 -0700
+++ 25-akpm/drivers/media/dvb/frontends/Kconfig 2004-09-20 11:22:37.733914536 -0700
@@ -63,13 +63,9 @@ config DVB_SP887X
help
A DVB-T tuner module. Say Y when you want to support this frontend.
- This driver needs a copy of the Avermedia firmware. The version tested
- is part of the Avermedia DVB-T 1.3.26.3 Application. If the software is
- installed in Windoze the file will be in the /Program Files/AVerTV DVB-T/
- directory and is called sc_main.mc. Alternatively it can "extracted" from
- the install cab files.
-
- Copy this file to '/usr/lib/hotplug/firmware/dvb-fe-sp887x.fw'.
+ This driver needs external firmware. Please use the command
+ "<kerneldir>/Documentation/dvb/get_dvb_firmware sp887x" to
+ download/extract it, and then copy it to /usr/lib/hotplug/firmware.
If you don't know what tuner module is soldered on your
DVB adapter simply enable all supported frontends, the
@@ -81,9 +77,9 @@ config DVB_ALPS_TDLB7
help
A DVB-T tuner module. Say Y when you want to support this frontend.
- This driver needs a copy of the firmware file from the Haupauge
- Windoze driver. Copy 'Sc_main.mc' to
- '/usr/lib/hotplug/firmware/dvb-fe-tdlb7.fw'.
+ This driver needs external firmware. Please use the command
+ "<kerneldir>/Documentation/dvb/get_dvb_firmware alps_tdlb7" to
+ download/extract it, and then copy it to /usr/lib/hotplug/firmware.
If you don't know what tuner module is soldered on your
DVB adapter simply enable all supported frontends, the
@@ -99,6 +95,16 @@ config DVB_ALPS_TDMB7
DVB adapter simply enable all supported frontends, the
right one will get autodetected.
+config DVB_CX22702
+ tristate "Conexant cx22702 demodulator (OFDM)"
+ depends on DVB_CORE
+ help
+ A DVB-T tuner module. Say Y when you want to support this frontend.
+
+ If you don't know what tuner module is soldered on your
+ DVB adapter simply enable all supported frontends, the
+ right one will get autodetected.
+
config DVB_GRUNDIG_29504_401
tristate "Grundig 29504-401 based"
depends on DVB_CORE
@@ -115,6 +121,11 @@ config DVB_TDA1004X
help
A DVB-T tuner module. Say Y when you want to support this frontend.
+ This driver needs external firmware. Please use the commands
+ "<kerneldir>/Documentation/dvb/get_dvb_firmware tda10045",
+ "<kerneldir>/Documentation/dvb/get_dvb_firmware tda10046" to
+ download/extract them, and then copy them to /usr/lib/hotplug/firmware.
+
If you don't know what tuner module is soldered on your
DVB adapter simply enable all supported frontends, the
right one will get autodetected.
@@ -139,6 +150,21 @@ config DVB_MT352
DVB adapter simply enable all supported frontends, the
right one will get autodetected.
+config DVB_DIB3000MB
+ tristate "DiBcom 3000-MB"
+ depends on DVB_CORE
+ help
+ A DVB-T tuner module. Designed for mobile usage. Say Y when you want
+ to support this frontend.
+
+ Used on USB-powered devices. You should also say Y to DVB_DIBUSB
+ (DiBcom USB DVB-T Adapter) to support the actual device,
+ this is "only" the frontend/tuner.
+
+ If you don't know what tuner module is soldered on your
+ DVB adapter simply enable all supported frontends, the
+ right one will get autodetected.
+
comment "DVB-C (cable) frontends"
depends on DVB_CORE
diff -puN drivers/media/dvb/Makefile~DVB-new-driver-dibusb drivers/media/dvb/Makefile
--- 25/drivers/media/dvb/Makefile~DVB-new-driver-dibusb 2004-09-20 11:22:37.724915904 -0700
+++ 25-akpm/drivers/media/dvb/Makefile 2004-09-20 11:22:37.732914688 -0700
@@ -2,5 +2,4 @@
# Makefile for the kernel multimedia device drivers.
#
-obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/
-
+obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dibusb/
_