arch/arm/Makefile                                            |    5 +-
 arch/arm/boot/dts/Makefile                                   |   15 +
 arch/arm/boot/dts/am335x-bbb-bone-buses.dtsi                 |   85 +++
 arch/arm/boot/dts/am335x-bone-common-univ.dtsi               | 2909 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/am335x-bone-common.dtsi                    |   25 +-
 arch/arm/boot/dts/am335x-bone-uboot-univ.dts                 |   29 +
 arch/arm/boot/dts/am335x-bone.dts                            |    5 +
 arch/arm/boot/dts/am335x-boneblack-uboot-univ.dts            |  184 +++++
 arch/arm/boot/dts/am335x-boneblack-uboot.dts                 |  193 ++++++
 arch/arm/boot/dts/am335x-boneblack-wireless.dts              |    5 +
 arch/arm/boot/dts/am335x-boneblack.dts                       |    5 +
 arch/arm/boot/dts/am335x-boneblue.dts                        |    2 +
 arch/arm/boot/dts/am335x-bonegreen-common.dtsi               |    1 +
 arch/arm/boot/dts/am335x-bonegreen-gateway.dts               |  260 ++++++++
 arch/arm/boot/dts/am335x-bonegreen-wireless-common-univ.dtsi | 2783 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/am335x-bonegreen-wireless-uboot-univ.dts   |   56 ++
 arch/arm/boot/dts/am335x-bonegreen-wireless.dts              |    5 +
 arch/arm/boot/dts/am335x-bonegreen.dts                       |    5 +
 arch/arm/boot/dts/am335x-osd3358-sm-red.dts                  |  147 +---
 arch/arm/boot/dts/am335x-osd335x-common.dtsi                 |    1 +
 arch/arm/boot/dts/am335x-pocketbeagle.dts                    | 2167 ++++++++++++++++++++++++++++++++++++++++++++++++++++++-----
 arch/arm/boot/dts/am335x-sancloud-bbe-lite.dts               |    6 +
 arch/arm/boot/dts/am335x-sancloud-bbe.dts                    |    5 +
 arch/arm/boot/dts/am33xx-l4.dtsi                             |    4 +-
 arch/arm/boot/dts/am33xx.dtsi                                |    7 +
 arch/arm/boot/dts/am5729-beagleboneai.dts                    |    5 +
 arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts                |    5 +
 arch/arm/boot/dts/am57xx-beagle-x15-revc.dts                 |    5 +
 arch/arm/boot/dts/am57xx-beagle-x15.dts                      |    5 +
 arch/arm/boot/dts/dra7.dtsi                                  |   16 +
 arch/arm/boot/dts/imx7d-pico-pi.dts                          |    4 +
 arch/arm/boot/dts/overlays/AM335X-PRU-UIO-00A0.dts           |   28 +
 arch/arm/boot/dts/overlays/BB-ADC-00A0.dts                   |  112 ++++
 arch/arm/boot/dts/overlays/BB-BBBW-WL1835-00A0.dts           |  120 ++++
 arch/arm/boot/dts/overlays/BB-BBGG-WL1835-00A0.dts           |  246 +++++++
 arch/arm/boot/dts/overlays/BB-BBGW-WL1835-00A0.dts           |  207 ++++++
 arch/arm/boot/dts/overlays/BB-BONE-4D5R-01-00A1.dts          |  224 +++++++
 arch/arm/boot/dts/overlays/BB-BONE-LCD4-01-00A1.dts          |  276 ++++++++
 arch/arm/boot/dts/overlays/BB-BONE-NH7C-01-A0.dts            |  232 +++++++
 arch/arm/boot/dts/overlays/BB-BONE-eMMC1-01-00A0.dts         |   61 ++
 arch/arm/boot/dts/overlays/BB-CAPE-DISP-CT4-00A0.dts         |  210 ++++++
 arch/arm/boot/dts/overlays/BB-HDMI-TDA998x-00A0.dts          |  188 ++++++
 arch/arm/boot/dts/overlays/BB-I2C2-BME680.dts                |   31 +
 arch/arm/boot/dts/overlays/BB-SPIDEV0-00A0.dts               |   81 +++
 arch/arm/boot/dts/overlays/BB-SPIDEV1-00A0.dts               |   81 +++
 arch/arm/boot/dts/overlays/BB-W1-P9.12-00A0.dts              |   46 ++
 arch/arm/boot/dts/overlays/BBORG_COMMS-00A2.dts              |   63 ++
 arch/arm/boot/dts/overlays/BBORG_FAN-A000.dts                |   27 +
 arch/arm/boot/dts/overlays/BBORG_RELAY-00A2.dts              |   74 +++
 arch/arm/boot/dts/overlays/BONE-ADC.dts                      |   28 +
 arch/arm/boot/dts/overlays/M-BB-BBG-00A0.dts                 |   21 +
 arch/arm/boot/dts/overlays/M-BB-BBGG-00A0.dts                |   24 +
 arch/arm/boot/dts/overlays/Makefile                          |   32 +
 arch/arm/boot/dts/overlays/PB-MIKROBUS-0.dts                 |  107 +++
 arch/arm/boot/dts/overlays/PB-MIKROBUS-1.dts                 |  108 +++
 drivers/Makefile                                             |    4 +-
 drivers/gnss/serial.c                                        |    3 +-
 drivers/gnss/ubx.c                                           |    9 +
 drivers/gpio/Kconfig                                         |   14 +
 drivers/gpio/Makefile                                        |    1 +
 drivers/gpio/gpio-of-helper.c                                |  422 ++++++++++++
 drivers/gpio/gpiolib-sysfs.c                                 |   35 +-
 drivers/gpio/gpiolib.c                                       |    6 +-
 drivers/input/misc/tps65218-pwrbutton.c                      |    2 +-
 drivers/input/touchscreen/ar1021_i2c.c                       |   81 ++-
 drivers/input/touchscreen/ti_am335x_tsc.c                    |   11 +-
 drivers/misc/Kconfig                                         |    1 +
 drivers/misc/Makefile                                        |    1 +
 drivers/misc/cape/Kconfig                                    |    5 +
 drivers/misc/cape/Makefile                                   |    5 +
 drivers/misc/cape/beaglebone/Kconfig                         |   10 +
 drivers/misc/cape/beaglebone/Makefile                        |    5 +
 drivers/misc/cape/beaglebone/bone-pinmux-helper.c            |  242 +++++++
 drivers/net/ieee802154/Kconfig                               |   18 +
 drivers/net/ieee802154/Makefile                              |    2 +
 drivers/net/ieee802154/bcfserial.c                           |  680 +++++++++++++++++++
 drivers/net/ieee802154/wpanusb.c                             |  783 ++++++++++++++++++++++
 drivers/net/ieee802154/wpanusb.h                             |   53 ++
 drivers/regulator/twl6030-regulator.c                        |   23 +
 drivers/spi/spidev.c                                         |    7 +-
 drivers/staging/fbtft/fb_ssd1306.c                           |   59 +-
 drivers/tty/serdev/core.c                                    |   58 +-
 drivers/tty/serial/8250/8250_omap.c                          |    6 +-
 drivers/tty/serial/8250/8250_port.c                          |   29 +-
 drivers/uio/uio_pdrv_genirq.c                                |    4 +-
 drivers/uio/uio_pruss.c                                      |  134 +++-
 include/dt-bindings/pinctrl/omap.h                           |    4 +-
 include/linux/mod_devicetable.h                              |   10 +
 include/linux/serdev.h                                       |    5 +
 scripts/Makefile.dtbinst                                     |    3 +-
 scripts/Makefile.lib                                         |   18 +
 scripts/mod/devicetable-offsets.c                            |    3 +
 scripts/mod/file2alias.c                                     |   10 +
 scripts/package/builddeb                                     |    1 +
 94 files changed, 13940 insertions(+), 403 deletions(-)

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 77172d555..57a246a5d 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -56,6 +56,9 @@ endif
 #
 KBUILD_CFLAGS	+= $(call cc-option,-fno-ipa-sra)
 
+# Need -msoft-float for gcc 11 for the below instruction set selection
+KBUILD_CFLAGS	+= -msoft-float
+
 # This selects which instruction set is used.
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes
@@ -129,7 +132,7 @@ AFLAGS_ISA	:=$(CFLAGS_ISA)
 endif
 
 # Need -Uarm for gcc < 3.x
-KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
+KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -Uarm
 KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
 
 CHECKFLAGS	+= -D__arm__
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e41eca79c..a0792e18d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1,4 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
+
+ifeq ($(CONFIG_OF_OVERLAY),y)
+DTC_FLAGS += -@
+endif
+
 dtb-$(CONFIG_ARCH_ALPINE) += \
 	alpine-db.dtb
 dtb-$(CONFIG_MACH_ARTPEC6) += \
@@ -870,6 +875,11 @@ dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-base0033.dtb \
 	am335x-bone.dtb \
 	am335x-boneblack.dtb \
+	am335x-bonegreen-wireless-uboot-univ.dtb \
+	am335x-boneblack-uboot-univ.dtb \
+	am335x-bone-uboot-univ.dtb \
+	am335x-boneblack-uboot.dtb \
+	am335x-bonegreen-gateway.dtb \
 	am335x-boneblack-wireless.dtb \
 	am335x-boneblue.dtb \
 	am335x-bonegreen.dtb \
@@ -1550,3 +1560,8 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-vegman-n110.dtb \
 	aspeed-bmc-vegman-rx20.dtb \
 	aspeed-bmc-vegman-sx20.dtb
+
+targets += dtbs dtbs_install
+targets += $(dtb-y)
+
+subdir-y	:= overlays
diff --git a/arch/arm/boot/dts/am335x-bbb-bone-buses.dtsi b/arch/arm/boot/dts/am335x-bbb-bone-buses.dtsi
new file mode 100644
index 000000000..02cd206a3
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-bbb-bone-buses.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Deepak Khatri <deepaklorkhatri7@gmail.com>
+ * Copyright (C) 2021 Robert Nelson <robertcnelson@gmail.com>
+ * See Cape Interface Spec page for more info on Bone Buses
+ * https://elinux.org/Beagleboard:BeagleBone_cape_interface_spec
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+
+// For dummy refrence when peripheral is not available.
+&{/} {
+	not_available: not_available {
+		// Use &not_available when required.
+		// This node is responsible to create these entries,
+		// /sys/firmware/devicetree/base/__symbols__/not_available
+		// /sys/firmware/devicetree/base/not_available
+	};
+};
+
+// For compatible bone pinmuxing
+bone_pinmux: &am33xx_pinmux {
+	emmc_pins: pinmux_emmc_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+		>;
+	};
+
+	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+		>;
+	};
+
+	mcasp0_pins: mcasp0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
+		>;
+	};
+};
+
+// ADC
+bone_adc: &tscadc {
+
+};
diff --git a/arch/arm/boot/dts/am335x-bone-common-univ.dtsi b/arch/arm/boot/dts/am335x-bone-common-univ.dtsi
new file mode 100644
index 000000000..ec3867c46
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-bone-common-univ.dtsi
@@ -0,0 +1,2909 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&am33xx_pinmux {
+	/************************/
+	/* P8 Header */
+	/************************/
+
+	/* P8_01                GND */
+
+	/* P8_02                GND */
+
+
+	/* P8_03 (ZCZ ball R9) emmc */
+	P8_03_default_pin: pinmux_P8_03_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0818, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad6.gpio1_6 */
+	P8_03_gpio_pin: pinmux_P8_03_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0818, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad6.gpio1_6 */
+	P8_03_gpio_pu_pin: pinmux_P8_03_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0818, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad6.gpio1_6 */
+	P8_03_gpio_pd_pin: pinmux_P8_03_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0818, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad6.gpio1_6 */
+	P8_03_gpio_input_pin: pinmux_P8_03_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0818, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad6.gpio1_6 */
+
+	/* P8_04 (ZCZ ball T9) emmc */
+	P8_04_default_pin: pinmux_P8_04_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x081c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad7.gpio1_7 */
+	P8_04_gpio_pin: pinmux_P8_04_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x081c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad7.gpio1_7 */
+	P8_04_gpio_pu_pin: pinmux_P8_04_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x081c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad7.gpio1_7 */
+	P8_04_gpio_pd_pin: pinmux_P8_04_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x081c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad7.gpio1_7 */
+	P8_04_gpio_input_pin: pinmux_P8_04_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x081c, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad7.gpio1_7 */
+
+	/* P8_05 (ZCZ ball R8) emmc */
+	P8_05_default_pin: pinmux_P8_05_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0808, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad2.gpio1_2 */
+	P8_05_gpio_pin: pinmux_P8_05_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0808, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad2.gpio1_2 */
+	P8_05_gpio_pu_pin: pinmux_P8_05_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0808, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad2.gpio1_2 */
+	P8_05_gpio_pd_pin: pinmux_P8_05_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0808, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad2.gpio1_2 */
+	P8_05_gpio_input_pin: pinmux_P8_05_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0808, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad2.gpio1_2 */
+
+	/* P8_06 (ZCZ ball T8) emmc */
+	P8_06_default_pin: pinmux_P8_06_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x080c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad3.gpio1_3 */
+	P8_06_gpio_pin: pinmux_P8_06_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x080c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad3.gpio1_3 */
+	P8_06_gpio_pu_pin: pinmux_P8_06_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x080c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad3.gpio1_3 */
+	P8_06_gpio_pd_pin: pinmux_P8_06_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x080c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad3.gpio1_3 */
+	P8_06_gpio_input_pin: pinmux_P8_06_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x080c, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad3.gpio1_3 */
+
+	/* P8_07 (ZCZ ball R7) gpio2_2 */
+	P8_07_default_pin: pinmux_P8_07_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0890, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_advn_ale.gpio2_2 */
+	P8_07_gpio_pin: pinmux_P8_07_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0890, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_advn_ale.gpio2_2 */
+	P8_07_gpio_pu_pin: pinmux_P8_07_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0890, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_advn_ale.gpio2_2 */
+	P8_07_gpio_pd_pin: pinmux_P8_07_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0890, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_advn_ale.gpio2_2 */
+	P8_07_gpio_input_pin: pinmux_P8_07_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0890, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_advn_ale.gpio2_2 */
+	P8_07_timer_pin: pinmux_P8_07_timer_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0890, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* gpmc_advn_ale.timer4 */
+
+	/* P8_08 (ZCZ ball T7) gpio2_3 */
+	P8_08_default_pin: pinmux_P8_08_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0894, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_oen_ren.gpio2_3 */
+	P8_08_gpio_pin: pinmux_P8_08_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0894, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_oen_ren.gpio2_3 */
+	P8_08_gpio_pu_pin: pinmux_P8_08_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0894, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_oen_ren.gpio2_3 */
+	P8_08_gpio_pd_pin: pinmux_P8_08_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0894, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_oen_ren.gpio2_3 */
+	P8_08_gpio_input_pin: pinmux_P8_08_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0894, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_oen_ren.gpio2_3 */
+	P8_08_timer_pin: pinmux_P8_08_timer_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0894, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* gpmc_oen_ren.timer7 */
+
+	/* P8_09 (ZCZ ball T6) gpio2_5 */
+	P8_09_default_pin: pinmux_P8_09_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x089c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_be0n_cle.gpio2_5 */
+	P8_09_gpio_pin: pinmux_P8_09_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x089c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_be0n_cle.gpio2_5 */
+	P8_09_gpio_pu_pin: pinmux_P8_09_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x089c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_be0n_cle.gpio2_5 */
+	P8_09_gpio_pd_pin: pinmux_P8_09_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x089c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_be0n_cle.gpio2_5 */
+	P8_09_gpio_input_pin: pinmux_P8_09_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x089c, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_be0n_cle.gpio2_5 */
+	P8_09_timer_pin: pinmux_P8_09_timer_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x089c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* gpmc_be0n_cle.timer5 */
+
+	/* P8_10 (ZCZ ball U6) gpio2_4 */
+	P8_10_default_pin: pinmux_P8_10_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0898, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_wen.gpio2_4 */
+	P8_10_gpio_pin: pinmux_P8_10_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0898, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_wen.gpio2_4 */
+	P8_10_gpio_pu_pin: pinmux_P8_10_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0898, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_wen.gpio2_4 */
+	P8_10_gpio_pd_pin: pinmux_P8_10_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0898, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_wen.gpio2_4 */
+	P8_10_gpio_input_pin: pinmux_P8_10_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0898, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_wen.gpio2_4 */
+	P8_10_timer_pin: pinmux_P8_10_timer_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0898, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* gpmc_wen.timer6 */
+
+	/* P8_11 (ZCZ ball R12) gpio1_13 */
+	P8_11_default_pin: pinmux_P8_11_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad13.gpio1_13 */
+	P8_11_gpio_pin: pinmux_P8_11_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0834, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad13.gpio1_13 */
+	P8_11_gpio_pu_pin: pinmux_P8_11_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad13.gpio1_13 */
+	P8_11_gpio_pd_pin: pinmux_P8_11_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad13.gpio1_13 */
+	P8_11_gpio_input_pin: pinmux_P8_11_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0834, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad13.gpio1_13 */
+	P8_11_qep_pin: pinmux_P8_11_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* gpmc_ad13.eqep2b_in */
+	P8_11_pruout_pin: pinmux_P8_11_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; };	/* gpmc_ad13.pru0_out15 */
+
+	/* P8_12 (ZCZ ball T12) gpio1_12 */
+	P8_12_default_pin: pinmux_P8_12_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad12.gpio1_12 */
+	P8_12_gpio_pin: pinmux_P8_12_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0830, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad12.gpio1_12 */
+	P8_12_gpio_pu_pin: pinmux_P8_12_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad12.gpio1_12 */
+	P8_12_gpio_pd_pin: pinmux_P8_12_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad12.gpio1_12 */
+	P8_12_gpio_input_pin: pinmux_P8_12_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0830, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad12.gpio1_12 */
+	P8_12_qep_pin: pinmux_P8_12_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* gpmc_ad12.eqep2a_in */
+	P8_12_pruout_pin: pinmux_P8_12_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; };	/* gpmc_ad12.pru0_out14 */
+
+	/* P8_13 (ZCZ ball T10) gpio0_23 */
+	P8_13_default_pin: pinmux_P8_13_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad9.gpio0_23 */
+	P8_13_gpio_pin: pinmux_P8_13_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0824, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad9.gpio0_23 */
+	P8_13_gpio_pu_pin: pinmux_P8_13_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad9.gpio0_23 */
+	P8_13_gpio_pd_pin: pinmux_P8_13_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad9.gpio0_23 */
+	P8_13_gpio_input_pin: pinmux_P8_13_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0824, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad9.gpio0_23 */
+	P8_13_pwm_pin: pinmux_P8_13_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; };	/* gpmc_ad9.ehrpwm2b */
+
+	/* P8_14 (ZCZ ball T11) gpio0_26 */
+	P8_14_default_pin: pinmux_P8_14_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0828, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad10.gpio0_26 */
+	P8_14_gpio_pin: pinmux_P8_14_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0828, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad10.gpio0_26 */
+	P8_14_gpio_pu_pin: pinmux_P8_14_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0828, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad10.gpio0_26 */
+	P8_14_gpio_pd_pin: pinmux_P8_14_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0828, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad10.gpio0_26 */
+	P8_14_gpio_input_pin: pinmux_P8_14_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0828, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad10.gpio0_26 */
+	P8_14_pwm_pin: pinmux_P8_14_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0828, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; };	/* gpmc_ad10.ehrpwm2_tripzone_input */
+
+	/* P8_15 (ZCZ ball U13) gpio1_15 */
+	P8_15_default_pin: pinmux_P8_15_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad15.gpio1_15 */
+	P8_15_gpio_pin: pinmux_P8_15_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x083c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad15.gpio1_15 */
+	P8_15_gpio_pu_pin: pinmux_P8_15_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad15.gpio1_15 */
+	P8_15_gpio_pd_pin: pinmux_P8_15_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad15.gpio1_15 */
+	P8_15_gpio_input_pin: pinmux_P8_15_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x083c, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad15.gpio1_15 */
+	P8_15_qep_pin: pinmux_P8_15_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* gpmc_ad15.eqep2_strobe */
+	P8_15_pru_ecap_pin: pinmux_P8_15_pru_ecap_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* gpmc_ad15.pr1_ecap0_ecap_capin_apwm_o */
+	P8_15_pruin_pin: pinmux_P8_15_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x083c, PIN_INPUT | MUX_MODE6) >; };			/* gpmc_ad15.pru0_in15 */
+
+	/* P8_16 (ZCZ ball V13) gpio1_14 */
+	P8_16_default_pin: pinmux_P8_16_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad14.gpio1_14 */
+	P8_16_gpio_pin: pinmux_P8_16_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0838, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad14.gpio1_14 */
+	P8_16_gpio_pu_pin: pinmux_P8_16_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad14.gpio1_14 */
+	P8_16_gpio_pd_pin: pinmux_P8_16_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad14.gpio1_14 */
+	P8_16_gpio_input_pin: pinmux_P8_16_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0838, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad14.gpio1_14 */
+	P8_16_qep_pin: pinmux_P8_16_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* gpmc_ad14.eqep2_index */
+	P8_16_pruin_pin: pinmux_P8_16_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0838, PIN_INPUT | MUX_MODE6) >; };			/* gpmc_ad14.pru0_in14 */
+
+	/* P8_17 (ZCZ ball U12) gpio0_27 */
+	P8_17_default_pin: pinmux_P8_17_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x082c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad11.gpio0_27 */
+	P8_17_gpio_pin: pinmux_P8_17_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x082c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad11.gpio0_27 */
+	P8_17_gpio_pu_pin: pinmux_P8_17_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x082c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad11.gpio0_27 */
+	P8_17_gpio_pd_pin: pinmux_P8_17_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x082c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad11.gpio0_27 */
+	P8_17_gpio_input_pin: pinmux_P8_17_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x082c, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad11.gpio0_27 */
+	P8_17_pwm_pin: pinmux_P8_17_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x082c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; };	/* gpmc_ad11.ehrpwm0_synco */
+
+	/* P8_18 (ZCZ ball V12) gpio2_1 */
+	P8_18_default_pin: pinmux_P8_18_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_clk.gpio2_1 */
+	P8_18_gpio_pin: pinmux_P8_18_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x088c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_clk.gpio2_1 */
+	P8_18_gpio_pu_pin: pinmux_P8_18_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_clk.gpio2_1 */
+	P8_18_gpio_pd_pin: pinmux_P8_18_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_clk.gpio2_1 */
+	P8_18_gpio_input_pin: pinmux_P8_18_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x088c, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_clk.gpio2_1 */
+
+	/* P8_19 (ZCZ ball U10) gpio0_22 */
+	P8_19_default_pin: pinmux_P8_19_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0820, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad8.gpio0_22 */
+	P8_19_gpio_pin: pinmux_P8_19_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0820, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad8.gpio0_22 */
+	P8_19_gpio_pu_pin: pinmux_P8_19_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0820, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad8.gpio0_22 */
+	P8_19_gpio_pd_pin: pinmux_P8_19_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0820, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad8.gpio0_22 */
+	P8_19_gpio_input_pin: pinmux_P8_19_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0820, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad8.gpio0_22 */
+	P8_19_pwm_pin: pinmux_P8_19_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0820, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; };	/* gpmc_ad8.ehrpwm2a */
+
+	/* P8_20 (ZCZ ball V9) emmc */
+	P8_20_default_pin: pinmux_P8_20_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0884, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_csn2.gpio1_31 */
+	P8_20_gpio_pin: pinmux_P8_20_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0884, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_csn2.gpio1_31 */
+	P8_20_gpio_pu_pin: pinmux_P8_20_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0884, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_csn2.gpio1_31 */
+	P8_20_gpio_pd_pin: pinmux_P8_20_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0884, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_csn2.gpio1_31 */
+	P8_20_gpio_input_pin: pinmux_P8_20_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0884, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_csn2.gpio1_31 */
+	P8_20_pruout_pin: pinmux_P8_20_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0884, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* gpmc_csn2.pru1_out13 */
+	P8_20_pruin_pin: pinmux_P8_20_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0884, PIN_INPUT | MUX_MODE6) >; };			/* gpmc_csn2.pru1_in13 */
+
+	/* P8_21 (ZCZ ball U9) emmc */
+	P8_21_default_pin: pinmux_P8_21_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0880, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_csn1.gpio1_30 */
+	P8_21_gpio_pin: pinmux_P8_21_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0880, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_csn1.gpio1_30 */
+	P8_21_gpio_pu_pin: pinmux_P8_21_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0880, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_csn1.gpio1_30 */
+	P8_21_gpio_pd_pin: pinmux_P8_21_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0880, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_csn1.gpio1_30 */
+	P8_21_gpio_input_pin: pinmux_P8_21_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0880, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_csn1.gpio1_30 */
+	P8_21_pruout_pin: pinmux_P8_21_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0880, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* gpmc_csn1.pru1_out12 */
+	P8_21_pruin_pin: pinmux_P8_21_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0880, PIN_INPUT | MUX_MODE6) >; };			/* gpmc_csn1.pru1_in12 */
+
+	/* P8_22 (ZCZ ball V8) emmc */
+	P8_22_default_pin: pinmux_P8_22_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0814, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad5.gpio1_5 */
+	P8_22_gpio_pin: pinmux_P8_22_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0814, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad5.gpio1_5 */
+	P8_22_gpio_pu_pin: pinmux_P8_22_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0814, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad5.gpio1_5 */
+	P8_22_gpio_pd_pin: pinmux_P8_22_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0814, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad5.gpio1_5 */
+	P8_22_gpio_input_pin: pinmux_P8_22_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0814, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad5.gpio1_5 */
+
+	/* P8_23 (ZCZ ball U8) emmc */
+	P8_23_default_pin: pinmux_P8_23_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0810, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad4.gpio1_4 */
+	P8_23_gpio_pin: pinmux_P8_23_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0810, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad4.gpio1_4 */
+	P8_23_gpio_pu_pin: pinmux_P8_23_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0810, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad4.gpio1_4 */
+	P8_23_gpio_pd_pin: pinmux_P8_23_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0810, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad4.gpio1_4 */
+	P8_23_gpio_input_pin: pinmux_P8_23_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0810, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad4.gpio1_4 */
+
+	/* P8_24 (ZCZ ball V7) emmc */
+	P8_24_default_pin: pinmux_P8_24_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0804, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad1.gpio1_1 */
+	P8_24_gpio_pin: pinmux_P8_24_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0804, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad1.gpio1_1 */
+	P8_24_gpio_pu_pin: pinmux_P8_24_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0804, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad1.gpio1_1 */
+	P8_24_gpio_pd_pin: pinmux_P8_24_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0804, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad1.gpio1_1 */
+	P8_24_gpio_input_pin: pinmux_P8_24_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0804, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad1.gpio1_1 */
+
+	/* P8_25 (ZCZ ball U7) emmc */
+	P8_25_default_pin: pinmux_P8_25_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0800, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad0.gpio1_0 */
+	P8_25_gpio_pin: pinmux_P8_25_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0800, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad0.gpio1_0 */
+	P8_25_gpio_pu_pin: pinmux_P8_25_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0800, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad0.gpio1_0 */
+	P8_25_gpio_pd_pin: pinmux_P8_25_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0800, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad0.gpio1_0 */
+	P8_25_gpio_input_pin: pinmux_P8_25_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0800, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad0.gpio1_0 */
+
+	/* P8_26 (ZCZ ball V6) gpio1_29 */
+	P8_26_default_pin: pinmux_P8_26_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x087c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_csn0.gpio1_29 */
+	P8_26_gpio_pin: pinmux_P8_26_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x087c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_csn0.gpio1_29 */
+	P8_26_gpio_pu_pin: pinmux_P8_26_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x087c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_csn0.gpio1_29 */
+	P8_26_gpio_pd_pin: pinmux_P8_26_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x087c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_csn0.gpio1_29 */
+	P8_26_gpio_input_pin: pinmux_P8_26_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x087c, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_csn0.gpio1_29 */
+
+	/* P8_27 (ZCZ ball U5) hdmi */
+	P8_27_default_pin: pinmux_P8_27_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_vsync.gpio2_22 */
+	P8_27_gpio_pin: pinmux_P8_27_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_vsync.gpio2_22 */
+	P8_27_gpio_pu_pin: pinmux_P8_27_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_vsync.gpio2_22 */
+	P8_27_gpio_pd_pin: pinmux_P8_27_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_vsync.gpio2_22 */
+	P8_27_gpio_input_pin: pinmux_P8_27_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e0, PIN_INPUT | MUX_MODE7) >; };			/* lcd_vsync.gpio2_22 */
+	P8_27_pruout_pin: pinmux_P8_27_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_vsync.pru1_out8 */
+	P8_27_pruin_pin: pinmux_P8_27_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e0, PIN_INPUT | MUX_MODE6) >; };			/* lcd_vsync.pru1_in8 */
+
+	/* P8_28 (ZCZ ball V5) hdmi */
+	P8_28_default_pin: pinmux_P8_28_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_pclk.gpio2_24 */
+	P8_28_gpio_pin: pinmux_P8_28_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_pclk.gpio2_24 */
+	P8_28_gpio_pu_pin: pinmux_P8_28_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_pclk.gpio2_24 */
+	P8_28_gpio_pd_pin: pinmux_P8_28_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_pclk.gpio2_24 */
+	P8_28_gpio_input_pin: pinmux_P8_28_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e8, PIN_INPUT | MUX_MODE7) >; };			/* lcd_pclk.gpio2_24 */
+	P8_28_pruout_pin: pinmux_P8_28_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_pclk.pru1_out10 */
+	P8_28_pruin_pin: pinmux_P8_28_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e8, PIN_INPUT | MUX_MODE6) >; };			/* lcd_pclk.pru1_in10 */
+
+	/* P8_29 (ZCZ ball R5) hdmi */
+	P8_29_default_pin: pinmux_P8_29_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_hsync.gpio2_23 */
+	P8_29_gpio_pin: pinmux_P8_29_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_hsync.gpio2_23 */
+	P8_29_gpio_pu_pin: pinmux_P8_29_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_hsync.gpio2_23 */
+	P8_29_gpio_pd_pin: pinmux_P8_29_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_hsync.gpio2_23 */
+	P8_29_gpio_input_pin: pinmux_P8_29_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e4, PIN_INPUT | MUX_MODE7) >; };			/* lcd_hsync.gpio2_23 */
+	P8_29_pruout_pin: pinmux_P8_29_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_hsync.pru1_out9 */
+	P8_29_pruin_pin: pinmux_P8_29_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e4, PIN_INPUT | MUX_MODE6) >; };			/* lcd_hsync.pru1_in9 */
+
+	/* P8_30 (ZCZ ball R6) hdmi */
+	P8_30_default_pin: pinmux_P8_30_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_ac_bias_en.gpio2_25 */
+	P8_30_gpio_pin: pinmux_P8_30_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ec, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_ac_bias_en.gpio2_25 */
+	P8_30_gpio_pu_pin: pinmux_P8_30_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_ac_bias_en.gpio2_25 */
+	P8_30_gpio_pd_pin: pinmux_P8_30_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_ac_bias_en.gpio2_25 */
+	P8_30_gpio_input_pin: pinmux_P8_30_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ec, PIN_INPUT | MUX_MODE7) >; };			/* lcd_ac_bias_en.gpio2_25 */
+	P8_30_pruout_pin: pinmux_P8_30_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_ac_bias_en.pru1_out11 */
+	P8_30_pruin_pin: pinmux_P8_30_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ec, PIN_INPUT | MUX_MODE6) >; };			/* lcd_ac_bias_en.pru1_in11 */
+
+	/* P8_31 (ZCZ ball V4) hdmi */
+	P8_31_default_pin: pinmux_P8_31_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data14.gpio0_10 */
+	P8_31_gpio_pin: pinmux_P8_31_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data14.gpio0_10 */
+	P8_31_gpio_pu_pin: pinmux_P8_31_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data14.gpio0_10 */
+	P8_31_gpio_pd_pin: pinmux_P8_31_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data14.gpio0_10 */
+	P8_31_gpio_input_pin: pinmux_P8_31_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d8, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data14.gpio0_10 */
+	P8_31_qep_pin: pinmux_P8_31_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* lcd_data14.eqep1_index */
+	P8_31_uart_pin: pinmux_P8_31_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* lcd_data14.uart5_rxd */
+
+	/* P8_32 (ZCZ ball T5) hdmi */
+	P8_32_default_pin: pinmux_P8_32_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08dc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data15.gpio0_11 */
+	P8_32_gpio_pin: pinmux_P8_32_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08dc, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data15.gpio0_11 */
+	P8_32_gpio_pu_pin: pinmux_P8_32_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08dc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data15.gpio0_11 */
+	P8_32_gpio_pd_pin: pinmux_P8_32_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08dc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data15.gpio0_11 */
+	P8_32_gpio_input_pin: pinmux_P8_32_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08dc, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data15.gpio0_11 */
+	P8_32_qep_pin: pinmux_P8_32_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08dc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* lcd_data15.eqep1_strobe */
+
+	/* P8_33 (ZCZ ball V3) hdmi */
+	P8_33_default_pin: pinmux_P8_33_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data13.gpio0_9 */
+	P8_33_gpio_pin: pinmux_P8_33_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data13.gpio0_9 */
+	P8_33_gpio_pu_pin: pinmux_P8_33_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data13.gpio0_9 */
+	P8_33_gpio_pd_pin: pinmux_P8_33_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data13.gpio0_9 */
+	P8_33_gpio_input_pin: pinmux_P8_33_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d4, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data13.gpio0_9 */
+	P8_33_qep_pin: pinmux_P8_33_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* lcd_data13.eqep1b_in */
+
+	/* P8_34 (ZCZ ball U4) hdmi */
+	P8_34_default_pin: pinmux_P8_34_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08cc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data11.gpio2_17 */
+	P8_34_gpio_pin: pinmux_P8_34_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08cc, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data11.gpio2_17 */
+	P8_34_gpio_pu_pin: pinmux_P8_34_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08cc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data11.gpio2_17 */
+	P8_34_gpio_pd_pin: pinmux_P8_34_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08cc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data11.gpio2_17 */
+	P8_34_gpio_input_pin: pinmux_P8_34_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08cc, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data11.gpio2_17 */
+	P8_34_pwm_pin: pinmux_P8_34_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08cc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE2) >; };	/* lcd_data11.ehrpwm1b */
+
+	/* P8_35 (ZCZ ball V2) hdmi */
+	P8_35_default_pin: pinmux_P8_35_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data12.gpio0_8 */
+	P8_35_gpio_pin: pinmux_P8_35_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data12.gpio0_8 */
+	P8_35_gpio_pu_pin: pinmux_P8_35_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data12.gpio0_8 */
+	P8_35_gpio_pd_pin: pinmux_P8_35_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data12.gpio0_8 */
+	P8_35_gpio_input_pin: pinmux_P8_35_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d0, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data12.gpio0_8 */
+	P8_35_qep_pin: pinmux_P8_35_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* lcd_data12.eqep1a_in */
+
+	/* P8_36 (ZCZ ball U3) hdmi */
+	P8_36_default_pin: pinmux_P8_36_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data10.gpio2_16 */
+	P8_36_gpio_pin: pinmux_P8_36_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data10.gpio2_16 */
+	P8_36_gpio_pu_pin: pinmux_P8_36_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data10.gpio2_16 */
+	P8_36_gpio_pd_pin: pinmux_P8_36_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data10.gpio2_16 */
+	P8_36_gpio_input_pin: pinmux_P8_36_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c8, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data10.gpio2_16 */
+	P8_36_pwm_pin: pinmux_P8_36_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE2) >; };	/* lcd_data10.ehrpwm1a */
+
+	/* P8_37 (ZCZ ball U1) hdmi */
+	P8_37_default_pin: pinmux_P8_37_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data8.gpio2_14 */
+	P8_37_gpio_pin: pinmux_P8_37_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data8.gpio2_14 */
+	P8_37_gpio_pu_pin: pinmux_P8_37_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data8.gpio2_14 */
+	P8_37_gpio_pd_pin: pinmux_P8_37_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data8.gpio2_14 */
+	P8_37_gpio_input_pin: pinmux_P8_37_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c0, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data8.gpio2_14 */
+	P8_37_pwm_pin: pinmux_P8_37_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE2) >; };	/* lcd_data8.ehrpwm1_tripzone_input */
+	P8_37_uart_pin: pinmux_P8_37_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* lcd_data8.uart5_txd */
+
+	/* P8_38 (ZCZ ball U2) hdmi */
+	P8_38_default_pin: pinmux_P8_38_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data9.gpio2_15 */
+	P8_38_gpio_pin: pinmux_P8_38_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data9.gpio2_15 */
+	P8_38_gpio_pu_pin: pinmux_P8_38_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data9.gpio2_15 */
+	P8_38_gpio_pd_pin: pinmux_P8_38_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data9.gpio2_15 */
+	P8_38_gpio_input_pin: pinmux_P8_38_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c4, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data9.gpio2_15 */
+	P8_38_pwm_pin: pinmux_P8_38_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE2) >; };	/* lcd_data9.ehrpwm0_synco */
+	P8_38_uart_pin: pinmux_P8_38_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* lcd_data9.uart5_rxd */
+
+	/* P8_39 (ZCZ ball T3) hdmi */
+	P8_39_default_pin: pinmux_P8_39_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data6.gpio2_12 */
+	P8_39_gpio_pin: pinmux_P8_39_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data6.gpio2_12 */
+	P8_39_gpio_pu_pin: pinmux_P8_39_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data6.gpio2_12 */
+	P8_39_gpio_pd_pin: pinmux_P8_39_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data6.gpio2_12 */
+	P8_39_gpio_input_pin: pinmux_P8_39_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b8, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data6.gpio2_12 */
+	P8_39_qep_pin: pinmux_P8_39_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* lcd_data6.eqep2_index */
+	P8_39_pruout_pin: pinmux_P8_39_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_data6.pru1_out6 */
+	P8_39_pruin_pin: pinmux_P8_39_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b8, PIN_INPUT | MUX_MODE6) >; };			/* lcd_data6.pru1_in6 */
+
+	/* P8_40 (ZCZ ball T4) hdmi */
+	P8_40_default_pin: pinmux_P8_40_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data7.gpio2_13 */
+	P8_40_gpio_pin: pinmux_P8_40_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08bc, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data7.gpio2_13 */
+	P8_40_gpio_pu_pin: pinmux_P8_40_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data7.gpio2_13 */
+	P8_40_gpio_pd_pin: pinmux_P8_40_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data7.gpio2_13 */
+	P8_40_gpio_input_pin: pinmux_P8_40_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08bc, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data7.gpio2_13 */
+	P8_40_qep_pin: pinmux_P8_40_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* lcd_data7.eqep2_strobe */
+	P8_40_pruout_pin: pinmux_P8_40_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_data7.pru1_out7 */
+	P8_40_pruin_pin: pinmux_P8_40_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08bc, PIN_INPUT | MUX_MODE6) >; };			/* lcd_data7.pru1_in7 */
+
+	/* P8_41 (ZCZ ball T1) hdmi */
+	P8_41_default_pin: pinmux_P8_41_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data4.gpio2_10 */
+	P8_41_gpio_pin: pinmux_P8_41_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data4.gpio2_10 */
+	P8_41_gpio_pu_pin: pinmux_P8_41_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data4.gpio2_10 */
+	P8_41_gpio_pd_pin: pinmux_P8_41_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data4.gpio2_10 */
+	P8_41_gpio_input_pin: pinmux_P8_41_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b0, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data4.gpio2_10 */
+	P8_41_qep_pin: pinmux_P8_41_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* lcd_data4.eqep2a_in */
+	P8_41_pruout_pin: pinmux_P8_41_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_data4.pru1_out4 */
+	P8_41_pruin_pin: pinmux_P8_41_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b0, PIN_INPUT | MUX_MODE6) >; };			/* lcd_data4.pru1_in4 */
+
+	/* P8_42 (ZCZ ball T2) hdmi */
+	P8_42_default_pin: pinmux_P8_42_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data5.gpio2_11 */
+	P8_42_gpio_pin: pinmux_P8_42_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data5.gpio2_11 */
+	P8_42_gpio_pu_pin: pinmux_P8_42_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data5.gpio2_11 */
+	P8_42_gpio_pd_pin: pinmux_P8_42_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data5.gpio2_11 */
+	P8_42_gpio_input_pin: pinmux_P8_42_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b4, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data5.gpio2_11 */
+	P8_42_qep_pin: pinmux_P8_42_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* lcd_data5.eqep2b_in */
+	P8_42_pruout_pin: pinmux_P8_42_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_data5.pru1_out5 */
+	P8_42_pruin_pin: pinmux_P8_42_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b4, PIN_INPUT | MUX_MODE6) >; };			/* lcd_data5.pru1_in5 */
+
+	/* P8_43 (ZCZ ball R3) hdmi */
+	P8_43_default_pin: pinmux_P8_43_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data2.gpio2_8 */
+	P8_43_gpio_pin: pinmux_P8_43_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data2.gpio2_8 */
+	P8_43_gpio_pu_pin: pinmux_P8_43_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data2.gpio2_8 */
+	P8_43_gpio_pd_pin: pinmux_P8_43_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data2.gpio2_8 */
+	P8_43_gpio_input_pin: pinmux_P8_43_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a8, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data2.gpio2_8 */
+	P8_43_pwm_pin: pinmux_P8_43_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; };	/* lcd_data2.ehrpwm2_tripzone_input */
+	P8_43_pruout_pin: pinmux_P8_43_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_data2.pru1_out2 */
+	P8_43_pruin_pin: pinmux_P8_43_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a8, PIN_INPUT | MUX_MODE6) >; };			/* lcd_data2.pru1_in2 */
+
+	/* P8_44 (ZCZ ball R4) hdmi */
+	P8_44_default_pin: pinmux_P8_44_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data3.gpio2_9 */
+	P8_44_gpio_pin: pinmux_P8_44_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ac, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data3.gpio2_9 */
+	P8_44_gpio_pu_pin: pinmux_P8_44_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data3.gpio2_9 */
+	P8_44_gpio_pd_pin: pinmux_P8_44_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data3.gpio2_9 */
+	P8_44_gpio_input_pin: pinmux_P8_44_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ac, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data3.gpio2_9 */
+	P8_44_pwm_pin: pinmux_P8_44_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; };	/* lcd_data3.ehrpwm0_synco */
+	P8_44_pruout_pin: pinmux_P8_44_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_data3.pru1_out3 */
+	P8_44_pruin_pin: pinmux_P8_44_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ac, PIN_INPUT | MUX_MODE6) >; };			/* lcd_data3.pru1_in3 */
+
+	/* P8_45 (ZCZ ball R1) hdmi */
+	P8_45_default_pin: pinmux_P8_45_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data0.gpio2_6 */
+	P8_45_gpio_pin: pinmux_P8_45_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data0.gpio2_6 */
+	P8_45_gpio_pu_pin: pinmux_P8_45_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data0.gpio2_6 */
+	P8_45_gpio_pd_pin: pinmux_P8_45_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data0.gpio2_6 */
+	P8_45_gpio_input_pin: pinmux_P8_45_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a0, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data0.gpio2_6 */
+	P8_45_pwm_pin: pinmux_P8_45_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; };	/* lcd_data0.ehrpwm2a */
+	P8_45_pruout_pin: pinmux_P8_45_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_data0.pru1_out0 */
+	P8_45_pruin_pin: pinmux_P8_45_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a0, PIN_INPUT | MUX_MODE6) >; };			/* lcd_data0.pru1_in0 */
+
+	/* P8_46 (ZCZ ball R2) hdmi */
+	P8_46_default_pin: pinmux_P8_46_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data1.gpio2_7 */
+	P8_46_gpio_pin: pinmux_P8_46_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data1.gpio2_7 */
+	P8_46_gpio_pu_pin: pinmux_P8_46_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data1.gpio2_7 */
+	P8_46_gpio_pd_pin: pinmux_P8_46_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data1.gpio2_7 */
+	P8_46_gpio_input_pin: pinmux_P8_46_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a4, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data1.gpio2_7 */
+	P8_46_pwm_pin: pinmux_P8_46_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; };	/* lcd_data1.ehrpwm2b */
+	P8_46_pruout_pin: pinmux_P8_46_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_data1.pru1_out1 */
+	P8_46_pruin_pin: pinmux_P8_46_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a4, PIN_INPUT | MUX_MODE6) >; };			/* lcd_data1.pru1_in1 */
+
+	/************************/
+	/* P9 Header */
+	/************************/
+
+	/* P9_01                GND */
+
+	/* P9_02                GND */
+
+	/* P9_03                3V3 */
+
+	/* P9_04                3V3 */
+
+	/* P9_05                VDD_5V */
+
+	/* P9_06                VDD_5V */
+
+	/* P9_07                SYS_5V */
+
+	/* P9_08                SYS_5V */
+
+	/* P9_09                PWR_BUT */
+
+	/* P9_10                RSTn */
+
+	/* P9_11 (ZCZ ball T17) gpio0_30 */
+	P9_11_default_pin: pinmux_P9_11_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_wait0.gpio0_30 */
+	P9_11_gpio_pin: pinmux_P9_11_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0870, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_wait0.gpio0_30 */
+	P9_11_gpio_pu_pin: pinmux_P9_11_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_wait0.gpio0_30 */
+	P9_11_gpio_pd_pin: pinmux_P9_11_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_wait0.gpio0_30 */
+	P9_11_gpio_input_pin: pinmux_P9_11_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0870, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_wait0.gpio0_30 */
+	P9_11_uart_pin: pinmux_P9_11_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; };	/* gpmc_wait0.uart4_rxd */
+
+	/* P9_12 (ZCZ ball U18) gpio1_28 */
+	P9_12_default_pin: pinmux_P9_12_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_be1n.gpio1_28 */
+	P9_12_gpio_pin: pinmux_P9_12_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0878, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_be1n.gpio1_28 */
+	P9_12_gpio_pu_pin: pinmux_P9_12_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_be1n.gpio1_28 */
+	P9_12_gpio_pd_pin: pinmux_P9_12_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_be1n.gpio1_28 */
+	P9_12_gpio_input_pin: pinmux_P9_12_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0878, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_be1n.gpio1_28 */
+
+	/* P9_13 (ZCZ ball U17) gpio0_31 */
+	P9_13_default_pin: pinmux_P9_13_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_wpn.gpio0_31 */
+	P9_13_gpio_pin: pinmux_P9_13_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0874, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_wpn.gpio0_31 */
+	P9_13_gpio_pu_pin: pinmux_P9_13_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_wpn.gpio0_31 */
+	P9_13_gpio_pd_pin: pinmux_P9_13_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_wpn.gpio0_31 */
+	P9_13_gpio_input_pin: pinmux_P9_13_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0874, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_wpn.gpio0_31 */
+	P9_13_uart_pin: pinmux_P9_13_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; };	/* gpmc_wpn.uart4_txd */
+
+	/* P9_14 (ZCZ ball U14) gpio1_18 */
+	P9_14_default_pin: pinmux_P9_14_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a2.gpio1_18 */
+	P9_14_gpio_pin: pinmux_P9_14_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0848, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_a2.gpio1_18 */
+	P9_14_gpio_pu_pin: pinmux_P9_14_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a2.gpio1_18 */
+	P9_14_gpio_pd_pin: pinmux_P9_14_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a2.gpio1_18 */
+	P9_14_gpio_input_pin: pinmux_P9_14_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0848, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_a2.gpio1_18 */
+	P9_14_pwm_pin: pinmux_P9_14_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; };	/* gpmc_a2.ehrpwm1a */
+
+	/* P9_15 (ZCZ ball R13) gpio1_16 */
+	P9_15_default_pin: pinmux_P9_15_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0840, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a0.gpio1_16 */
+	P9_15_gpio_pin: pinmux_P9_15_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0840, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_a0.gpio1_16 */
+	P9_15_gpio_pu_pin: pinmux_P9_15_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0840, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a0.gpio1_16 */
+	P9_15_gpio_pd_pin: pinmux_P9_15_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0840, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a0.gpio1_16 */
+	P9_15_gpio_input_pin: pinmux_P9_15_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0840, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_a0.gpio1_16 */
+	P9_15_pwm_pin: pinmux_P9_15_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0840, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; };	/* gpmc_a0.ehrpwm1_tripzone_input */
+
+	/* P9_16 (ZCZ ball T14) gpio1_19 */
+	P9_16_default_pin: pinmux_P9_16_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x084c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a3.gpio1_19 */
+	P9_16_gpio_pin: pinmux_P9_16_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x084c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_a3.gpio1_19 */
+	P9_16_gpio_pu_pin: pinmux_P9_16_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x084c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a3.gpio1_19 */
+	P9_16_gpio_pd_pin: pinmux_P9_16_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x084c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a3.gpio1_19 */
+	P9_16_gpio_input_pin: pinmux_P9_16_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x084c, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_a3.gpio1_19 */
+	P9_16_pwm_pin: pinmux_P9_16_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x084c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; };	/* gpmc_a3.ehrpwm1b */
+
+	/* P9_17 (ZCZ ball A16) gpio0_5 */
+	P9_17_default_pin: pinmux_P9_17_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* spi0_cs0.gpio0_5 */
+	P9_17_gpio_pin: pinmux_P9_17_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* spi0_cs0.gpio0_5 */
+	P9_17_gpio_pu_pin: pinmux_P9_17_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* spi0_cs0.gpio0_5 */
+	P9_17_gpio_pd_pin: pinmux_P9_17_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* spi0_cs0.gpio0_5 */
+	P9_17_gpio_input_pin: pinmux_P9_17_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_INPUT | MUX_MODE7) >; };			/* spi0_cs0.gpio0_5 */
+	P9_17_spi_cs_pin: pinmux_P9_17_spi_cs_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* spi0_cs0.spi0_cs0 */
+	P9_17_i2c_pin: pinmux_P9_17_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* spi0_cs0.i2c1_scl */
+	P9_17_pwm_pin: pinmux_P9_17_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; };	/* spi0_cs0.ehrpwm0_synci */
+	P9_17_pru_uart_pin: pinmux_P9_17_pru_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* spi0_cs0.pr1_uart0_txd */
+
+	/* P9_18 (ZCZ ball B16) gpio0_4 */
+	P9_18_default_pin: pinmux_P9_18_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* spi0_d1.gpio0_4 */
+	P9_18_gpio_pin: pinmux_P9_18_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* spi0_d1.gpio0_4 */
+	P9_18_gpio_pu_pin: pinmux_P9_18_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* spi0_d1.gpio0_4 */
+	P9_18_gpio_pd_pin: pinmux_P9_18_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* spi0_d1.gpio0_4 */
+	P9_18_gpio_input_pin: pinmux_P9_18_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_INPUT | MUX_MODE7) >; };			/* spi0_d1.gpio0_4 */
+	P9_18_spi_pin: pinmux_P9_18_spi_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* spi0_d1.spi0_d1 */
+	P9_18_i2c_pin: pinmux_P9_18_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* spi0_d1.i2c1_sda */
+	P9_18_pwm_pin: pinmux_P9_18_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; };	/* spi0_d1.ehrpwm0_tripzone_input */
+	P9_18_pru_uart_pin: pinmux_P9_18_pru_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* spi0_d1.pr1_uart0_rxd */
+
+	/* P9_19 (ZCZ ball D17) i2c2_scl */
+	P9_19_default_pin: pinmux_P9_19_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* uart1_rtsn.i2c2_scl */
+	P9_19_gpio_pin: pinmux_P9_19_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* uart1_rtsn.gpio0_13 */
+	P9_19_gpio_pu_pin: pinmux_P9_19_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* uart1_rtsn.gpio0_13 */
+	P9_19_gpio_pd_pin: pinmux_P9_19_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* uart1_rtsn.gpio0_13 */
+	P9_19_gpio_input_pin: pinmux_P9_19_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_INPUT | MUX_MODE7) >; };			/* uart1_rtsn.gpio0_13 */
+	P9_19_timer_pin: pinmux_P9_19_timer_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* uart1_rtsn.timer5 */
+	P9_19_can_pin: pinmux_P9_19_can_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_INPUT_PULLUP | MUX_MODE2) >; };		/* uart1_rtsn.dcan0_rx */
+	P9_19_i2c_pin: pinmux_P9_19_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* uart1_rtsn.i2c2_scl */
+	P9_19_spi_cs_pin: pinmux_P9_19_spi_cs_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* uart1_rtsn.spi1_cs1 */
+	P9_19_pru_uart_pin: pinmux_P9_19_pru_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; };	/* uart1_rtsn.pr1_uart0_rts_n */
+
+	/* P9_20 (ZCZ ball D18) i2c2_sda */
+	P9_20_default_pin: pinmux_P9_20_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* uart1_ctsn.i2c2_sda */
+	P9_20_gpio_pin: pinmux_P9_20_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* uart1_ctsn.gpio0_12 */
+	P9_20_gpio_pu_pin: pinmux_P9_20_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* uart1_ctsn.gpio0_12 */
+	P9_20_gpio_pd_pin: pinmux_P9_20_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* uart1_ctsn.gpio0_12 */
+	P9_20_gpio_input_pin: pinmux_P9_20_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_INPUT | MUX_MODE7) >; };			/* uart1_ctsn.gpio0_12 */
+	P9_20_timer_pin: pinmux_P9_20_timer_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* uart1_ctsn.timer6 */
+	P9_20_can_pin: pinmux_P9_20_can_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | MUX_MODE2) >; };		/* uart1_ctsn.dcan0_tx */
+	P9_20_i2c_pin: pinmux_P9_20_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* uart1_ctsn.i2c2_sda */
+	P9_20_spi_cs_pin: pinmux_P9_20_spi_cs_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* uart1_ctsn.spi1_cs0 */
+	P9_20_pru_uart_pin: pinmux_P9_20_pru_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; };	/* uart1_ctsn.pr1_uart0_cts_n */
+
+	/* P9_21 (ZCZ ball B17) gpio0_3 */
+	P9_21_default_pin: pinmux_P9_21_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* spi0_d0.gpio0_3 */
+	P9_21_gpio_pin: pinmux_P9_21_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* spi0_d0.gpio0_3 */
+	P9_21_gpio_pu_pin: pinmux_P9_21_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* spi0_d0.gpio0_3 */
+	P9_21_gpio_pd_pin: pinmux_P9_21_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* spi0_d0.gpio0_3 */
+	P9_21_gpio_input_pin: pinmux_P9_21_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_INPUT | MUX_MODE7) >; };			/* spi0_d0.gpio0_3 */
+	P9_21_spi_pin: pinmux_P9_21_spi_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* spi0_d0.spi0_d0 */
+	P9_21_uart_pin: pinmux_P9_21_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* spi0_d0.uart2_txd */
+	P9_21_i2c_pin: pinmux_P9_21_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* spi0_d0.i2c2_scl */
+	P9_21_pwm_pin: pinmux_P9_21_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; };	/* spi0_d0.ehrpwm0b */
+	P9_21_pru_uart_pin: pinmux_P9_21_pru_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* spi0_d0.pr1_uart0_rts_n */
+
+	/* P9_22 (ZCZ ball A17) gpio0_2 */
+	P9_22_default_pin: pinmux_P9_22_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* spi0_sclk.gpio0_2 */
+	P9_22_gpio_pin: pinmux_P9_22_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* spi0_sclk.gpio0_2 */
+	P9_22_gpio_pu_pin: pinmux_P9_22_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* spi0_sclk.gpio0_2 */
+	P9_22_gpio_pd_pin: pinmux_P9_22_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* spi0_sclk.gpio0_2 */
+	P9_22_gpio_input_pin: pinmux_P9_22_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_INPUT | MUX_MODE7) >; };			/* spi0_sclk.gpio0_2 */
+	P9_22_spi_sclk_pin: pinmux_P9_22_spi_sclk_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* spi0_sclk.spi0_sclk */
+	P9_22_uart_pin: pinmux_P9_22_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* spi0_sclk.uart2_rxd */
+	P9_22_i2c_pin: pinmux_P9_22_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* spi0_sclk.i2c2_sda */
+	P9_22_pwm_pin: pinmux_P9_22_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; };	/* spi0_sclk.ehrpwm0a */
+	P9_22_pru_uart_pin: pinmux_P9_22_pru_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* spi0_sclk.pr1_uart0_cts_n */
+
+	/* P9_23 (ZCZ ball V14) gpio1_17 */
+	P9_23_default_pin: pinmux_P9_23_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0844, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a1.gpio1_17 */
+	P9_23_gpio_pin: pinmux_P9_23_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0844, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_a1.gpio1_17 */
+	P9_23_gpio_pu_pin: pinmux_P9_23_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0844, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a1.gpio1_17 */
+	P9_23_gpio_pd_pin: pinmux_P9_23_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0844, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a1.gpio1_17 */
+	P9_23_gpio_input_pin: pinmux_P9_23_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0844, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_a1.gpio1_17 */
+	P9_23_pwm_pin: pinmux_P9_23_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0844, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; };	/* gpmc_a1.ehrpwm0_synco */
+
+	/* P9_24 (ZCZ ball D15) gpio0_15 */
+	P9_24_default_pin: pinmux_P9_24_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* uart1_txd.gpio0_15 */
+	P9_24_gpio_pin: pinmux_P9_24_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* uart1_txd.gpio0_15 */
+	P9_24_gpio_pu_pin: pinmux_P9_24_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* uart1_txd.gpio0_15 */
+	P9_24_gpio_pd_pin: pinmux_P9_24_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* uart1_txd.gpio0_15 */
+	P9_24_gpio_input_pin: pinmux_P9_24_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_INPUT | MUX_MODE7) >; };			/* uart1_txd.gpio0_15 */
+	P9_24_uart_pin: pinmux_P9_24_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* uart1_txd.uart1_txd */
+	P9_24_can_pin: pinmux_P9_24_can_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_INPUT_PULLUP | MUX_MODE2) >; };		/* uart1_txd.dcan1_rx */
+	P9_24_i2c_pin: pinmux_P9_24_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* uart1_txd.i2c1_scl */
+	P9_24_pru_uart_pin: pinmux_P9_24_pru_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; };	/* uart1_txd.pr1_uart0_txd */
+	P9_24_pruin_pin: pinmux_P9_24_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_INPUT | MUX_MODE6) >; };			/* uart1_txd.pru0_in16 */
+
+	/* P9_25 (ZCZ ball A14) audio */
+	P9_25_default_pin: pinmux_P9_25_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_ahclkx.gpio3_21 */
+	P9_25_gpio_pin: pinmux_P9_25_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09ac, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* mcasp0_ahclkx.gpio3_21 */
+	P9_25_gpio_pu_pin: pinmux_P9_25_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_ahclkx.gpio3_21 */
+	P9_25_gpio_pd_pin: pinmux_P9_25_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_ahclkx.gpio3_21 */
+	P9_25_gpio_input_pin: pinmux_P9_25_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09ac, PIN_INPUT | MUX_MODE7) >; };			/* mcasp0_ahclkx.gpio3_21 */
+	P9_25_qep_pin: pinmux_P9_25_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* mcasp0_ahclkx.eqep0_strobe */
+	P9_25_pruout_pin: pinmux_P9_25_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* mcasp0_ahclkx.pru0_out7 */
+	P9_25_pruin_pin: pinmux_P9_25_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09ac, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_ahclkx.pru0_in7 */
+
+	/* P9_26 (ZCZ ball D16) gpio0_14 */
+	P9_26_default_pin: pinmux_P9_26_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* uart1_rxd.gpio0_14 */
+	P9_26_gpio_pin: pinmux_P9_26_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* uart1_rxd.gpio0_14 */
+	P9_26_gpio_pu_pin: pinmux_P9_26_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* uart1_rxd.gpio0_14 */
+	P9_26_gpio_pd_pin: pinmux_P9_26_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* uart1_rxd.gpio0_14 */
+	P9_26_gpio_input_pin: pinmux_P9_26_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_INPUT | MUX_MODE7) >; };			/* uart1_rxd.gpio0_14 */
+	P9_26_uart_pin: pinmux_P9_26_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* uart1_rxd.uart1_rxd */
+	P9_26_can_pin: pinmux_P9_26_can_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | MUX_MODE2) >; };		/* uart1_rxd.dcan1_tx */
+	P9_26_i2c_pin: pinmux_P9_26_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* uart1_rxd.i2c1_sda */
+	P9_26_pru_uart_pin: pinmux_P9_26_pru_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; };	/* uart1_rxd.pr1_uart0_rxd */
+	P9_26_pruin_pin: pinmux_P9_26_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_INPUT | MUX_MODE6) >; };			/* uart1_rxd.pru1_in16 */
+
+	/* P9_27 (ZCZ ball C13) gpio3_19 */
+	P9_27_default_pin: pinmux_P9_27_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_fsr.gpio3_19 */
+	P9_27_gpio_pin: pinmux_P9_27_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* mcasp0_fsr.gpio3_19 */
+	P9_27_gpio_pu_pin: pinmux_P9_27_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_fsr.gpio3_19 */
+	P9_27_gpio_pd_pin: pinmux_P9_27_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_fsr.gpio3_19 */
+	P9_27_gpio_input_pin: pinmux_P9_27_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a4, PIN_INPUT | MUX_MODE7) >; };			/* mcasp0_fsr.gpio3_19 */
+	P9_27_qep_pin: pinmux_P9_27_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* mcasp0_fsr.eqep0b_in */
+	P9_27_pruout_pin: pinmux_P9_27_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* mcasp0_fsr.pru0_out5 */
+	P9_27_pruin_pin: pinmux_P9_27_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a4, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_fsr.pru0_in5 */
+
+	/* P9_28 (ZCZ ball C12) audio */
+	P9_28_default_pin: pinmux_P9_28_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_ahclkr.gpio3_17 */
+	P9_28_gpio_pin: pinmux_P9_28_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* mcasp0_ahclkr.gpio3_17 */
+	P9_28_gpio_pu_pin: pinmux_P9_28_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_ahclkr.gpio3_17 */
+	P9_28_gpio_pd_pin: pinmux_P9_28_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_ahclkr.gpio3_17 */
+	P9_28_gpio_input_pin: pinmux_P9_28_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_INPUT | MUX_MODE7) >; };			/* mcasp0_ahclkr.gpio3_17 */
+	P9_28_pwm_pin: pinmux_P9_28_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; };	/* mcasp0_ahclkr.ehrpwm0_synci */
+	P9_28_spi_cs_pin: pinmux_P9_28_spi_cs_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* mcasp0_ahclkr.spi1_cs0 */
+	P9_28_pwm2_pin: pinmux_P9_28_pwm2_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; };	/* mcasp0_ahclkr.ecap2_in_pwm2_out */
+	P9_28_pruout_pin: pinmux_P9_28_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* mcasp0_ahclkr.pru0_out3 */
+	P9_28_pruin_pin: pinmux_P9_28_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_ahclkr.pru0_in3 */
+
+	/* P9_29 (ZCZ ball B13) audio */
+	P9_29_default_pin: pinmux_P9_29_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_fsx.gpio3_15 */
+	P9_29_gpio_pin: pinmux_P9_29_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* mcasp0_fsx.gpio3_15 */
+	P9_29_gpio_pu_pin: pinmux_P9_29_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_fsx.gpio3_15 */
+	P9_29_gpio_pd_pin: pinmux_P9_29_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_fsx.gpio3_15 */
+	P9_29_gpio_input_pin: pinmux_P9_29_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_INPUT | MUX_MODE7) >; };			/* mcasp0_fsx.gpio3_15 */
+	P9_29_pwm_pin: pinmux_P9_29_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; };	/* mcasp0_fsx.ehrpwm0b */
+	P9_29_spi_pin: pinmux_P9_29_spi_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* mcasp0_fsx.spi1_d0 */
+	P9_29_pruout_pin: pinmux_P9_29_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* mcasp0_fsx.pru0_out1 */
+	P9_29_pruin_pin: pinmux_P9_29_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_fsx.pru0_in1 */
+
+	/* P9_30 (ZCZ ball D12) gpio3_16 */
+	P9_30_default_pin: pinmux_P9_30_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_axr0.gpio3_16 */
+	P9_30_gpio_pin: pinmux_P9_30_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0998, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* mcasp0_axr0.gpio3_16 */
+	P9_30_gpio_pu_pin: pinmux_P9_30_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_axr0.gpio3_16 */
+	P9_30_gpio_pd_pin: pinmux_P9_30_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_axr0.gpio3_16 */
+	P9_30_gpio_input_pin: pinmux_P9_30_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0998, PIN_INPUT | MUX_MODE7) >; };			/* mcasp0_axr0.gpio3_16 */
+	P9_30_pwm_pin: pinmux_P9_30_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; };	/* mcasp0_axr0.ehrpwm0_tripzone_input */
+	P9_30_spi_pin: pinmux_P9_30_spi_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* mcasp0_axr0.spi1_d1 */
+	P9_30_pruout_pin: pinmux_P9_30_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* mcasp0_axr0.pru0_out2 */
+	P9_30_pruin_pin: pinmux_P9_30_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0998, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_axr0.pru0_in2 */
+
+	/* P9_31 (ZCZ ball A13) audio */
+	P9_31_default_pin: pinmux_P9_31_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_aclkx.gpio3_14 */
+	P9_31_gpio_pin: pinmux_P9_31_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* mcasp0_aclkx.gpio3_14 */
+	P9_31_gpio_pu_pin: pinmux_P9_31_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_aclkx.gpio3_14 */
+	P9_31_gpio_pd_pin: pinmux_P9_31_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_aclkx.gpio3_14 */
+	P9_31_gpio_input_pin: pinmux_P9_31_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_INPUT | MUX_MODE7) >; };			/* mcasp0_aclkx.gpio3_14 */
+	P9_31_pwm_pin: pinmux_P9_31_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; };	/* mcasp0_aclkx.ehrpwm0a */
+	P9_31_spi_sclk_pin: pinmux_P9_31_spi_sclk_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* mcasp0_aclkx.spi1_sclk */
+	P9_31_pruout_pin: pinmux_P9_31_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* mcasp0_aclkx.pru0_out0 */
+	P9_31_pruin_pin: pinmux_P9_31_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_aclkx.pru0_in0 */
+
+	/* P9_32                VADC */
+
+	/* P9_33 (ZCZ ball C8)  AIN4         */
+
+	/* P9_34                AGND */
+
+	/* P9_35 (ZCZ ball A8)  AIN6         */
+
+	/* P9_36 (ZCZ ball B8)  AIN5         */
+
+	/* P9_37 (ZCZ ball B7)  AIN2         */
+
+	/* P9_38 (ZCZ ball A7)  AIN3         */
+
+	/* P9_39 (ZCZ ball B6)  AIN0         */
+
+	/* P9_40 (ZCZ ball C7)  AIN1         */
+
+	/* P9_41 (ZCZ ball D14) gpio0_20 */
+	P9_41_default_pin: pinmux_P9_41_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* xdma_event_intr1.gpio0_20 */
+	P9_41_gpio_pin: pinmux_P9_41_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* xdma_event_intr1.gpio0_20 */
+	P9_41_gpio_pu_pin: pinmux_P9_41_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* xdma_event_intr1.gpio0_20 */
+	P9_41_gpio_pd_pin: pinmux_P9_41_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* xdma_event_intr1.gpio0_20 */
+	P9_41_gpio_input_pin: pinmux_P9_41_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b4, PIN_INPUT | MUX_MODE7) >; };			/* xdma_event_intr1.gpio0_20 */
+	P9_41_timer_pin: pinmux_P9_41_timer_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* xdma_event_intr1.timer7 */
+	P9_41_pruin_pin: pinmux_P9_41_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b4, PIN_INPUT | MUX_MODE5) >; };			/* xdma_event_intr1.pru0_in16 */
+
+	/* P9_41.1 */
+	/* P9_91 (ZCZ ball D13) gpio3_20 */
+	P9_91_default_pin: pinmux_P9_91_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_axr1.gpio3_20 */
+	P9_91_gpio_pin: pinmux_P9_91_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* mcasp0_axr1.gpio3_20 */
+	P9_91_gpio_pu_pin: pinmux_P9_91_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_axr1.gpio3_20 */
+	P9_91_gpio_pd_pin: pinmux_P9_91_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_axr1.gpio3_20 */
+	P9_91_gpio_input_pin: pinmux_P9_91_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a8, PIN_INPUT | MUX_MODE7) >; };			/* mcasp0_axr1.gpio3_20 */
+	P9_91_qep_pin: pinmux_P9_91_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* mcasp0_axr1.eqep0_index */
+	P9_91_pruout_pin: pinmux_P9_91_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* mcasp0_axr1.pru0_out6 */
+	P9_91_pruin_pin: pinmux_P9_91_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a8, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_axr1.pru0_in6 */
+
+	/* P9_42 (ZCZ ball C18) gpio0_7 */
+	P9_42_default_pin: pinmux_P9_42_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* eCAP0_in_PWM0_out.gpio0_7 */
+	P9_42_gpio_pin: pinmux_P9_42_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* eCAP0_in_PWM0_out.gpio0_7 */
+	P9_42_gpio_pu_pin: pinmux_P9_42_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* eCAP0_in_PWM0_out.gpio0_7 */
+	P9_42_gpio_pd_pin: pinmux_P9_42_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* eCAP0_in_PWM0_out.gpio0_7 */
+	P9_42_gpio_input_pin: pinmux_P9_42_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_INPUT | MUX_MODE7) >; };			/* eCAP0_in_PWM0_out.gpio0_7 */
+	P9_42_pwm_pin: pinmux_P9_42_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE0) >; };	/* eCAP0_in_PWM0_out.ecap0_in_pwm0_out */
+	P9_42_uart_pin: pinmux_P9_42_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* eCAP0_in_PWM0_out.uart3_txd */
+	P9_42_spi_cs_pin: pinmux_P9_42_spi_cs_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* eCAP0_in_PWM0_out.spi1_cs1 */
+	P9_42_pru_ecap_pin: pinmux_P9_42_pru_ecap_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; };	/* eCAP0_in_PWM0_out.pr1_ecap0_ecap_capin_apwm_o */
+	P9_42_spi_sclk_pin: pinmux_P9_42_spi_sclk_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* eCAP0_in_PWM0_out.spi1_sclk */
+
+	/* P9_42.1 */
+	/* P9_92 (ZCZ ball B12) gpio3_18 */
+	P9_92_default_pin: pinmux_P9_92_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_aclkr.gpio3_18 */
+	P9_92_gpio_pin: pinmux_P9_92_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* mcasp0_aclkr.gpio3_18 */
+	P9_92_gpio_pu_pin: pinmux_P9_92_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_aclkr.gpio3_18 */
+	P9_92_gpio_pd_pin: pinmux_P9_92_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_aclkr.gpio3_18 */
+	P9_92_gpio_input_pin: pinmux_P9_92_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a0, PIN_INPUT | MUX_MODE7) >; };			/* mcasp0_aclkr.gpio3_18 */
+	P9_92_qep_pin: pinmux_P9_92_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* mcasp0_aclkr.eqep0a_in */
+	P9_92_pruout_pin: pinmux_P9_92_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* mcasp0_aclkr.pru0_out4 */
+	P9_92_pruin_pin: pinmux_P9_92_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a0, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_aclkr.pru0_in4 */
+
+	/* P9_43                GND */
+
+	/* P9_44                GND */
+
+	/* P9_45                GND */
+
+	/* P9_46                GND */
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+
+	clock-frequency = <100000>;
+	symlink = "bone/i2c/1";
+};
+
+&i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+
+	clock-frequency = <100000>;
+	symlink = "bone/i2c/2";
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+	symlink = "bone/uart/1";
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+	symlink = "bone/uart/2";
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+	symlink = "bone/uart/3";
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+	symlink = "bone/uart/4";
+};
+
+&uart5 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+	symlink = "bone/uart/5";
+};
+
+&dcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+	symlink = "bone/can/0";
+};
+
+&dcan1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+	symlink = "bone/can/1";
+};
+
+&eqep0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+	symlink = "bone/eqep/0";
+};
+
+&eqep1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+	symlink = "bone/eqep/1";
+};
+
+&eqep2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+	symlink = "bone/eqep/2";
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&epwmss1 {
+	status = "okay";
+};
+
+&epwmss2 {
+	status = "okay";
+};
+
+&ehrpwm0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&ehrpwm1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&ehrpwm2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&ecap0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&ecap1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&ecap2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+
+	channel@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "spidev";
+		symlink = "bone/spi/0.0";
+
+		reg = <0>;
+		spi-max-frequency = <16000000>;
+		spi-cpha;
+	};
+
+	channel@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "spidev";
+		symlink = "bone/spi/0.1";
+
+		reg = <1>;
+		spi-max-frequency = <16000000>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+
+	channel@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "spidev";
+		symlink = "bone/spi/1.0";
+
+		reg = <0>;
+		spi-max-frequency = <16000000>;
+		spi-cpha;
+	};
+
+	channel@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "spidev";
+		symlink = "bone/spi/1.1";
+
+		reg = <1>;
+		spi-max-frequency = <16000000>;
+	};
+};
+
+/**********************************************************************/
+/* Pin Multiplex Helpers                                              */
+/*                                                                    */
+/* These provide userspace runtime pin configuration for the          */
+/* BeagleBone cape expansion headers                                  */
+/**********************************************************************/
+
+&ocp {
+	/************************/
+	/* P8 Header */
+	/************************/
+
+	/* P8_01                GND */
+
+	/* P8_02                GND */
+
+
+	/* P8_03 (ZCZ ball R9) emmc */
+	P8_03_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P8_03_default_pin>;
+		pinctrl-1 = <&P8_03_gpio_pin>;
+		pinctrl-2 = <&P8_03_gpio_pu_pin>;
+		pinctrl-3 = <&P8_03_gpio_pd_pin>;
+		pinctrl-4 = <&P8_03_gpio_input_pin>;
+	};
+
+	/* P8_04 (ZCZ ball T9) emmc */
+	P8_04_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P8_04_default_pin>;
+		pinctrl-1 = <&P8_04_gpio_pin>;
+		pinctrl-2 = <&P8_04_gpio_pu_pin>;
+		pinctrl-3 = <&P8_04_gpio_pd_pin>;
+		pinctrl-4 = <&P8_04_gpio_input_pin>;
+	};
+
+	/* P8_05 (ZCZ ball R8) emmc */
+	P8_05_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P8_05_default_pin>;
+		pinctrl-1 = <&P8_05_gpio_pin>;
+		pinctrl-2 = <&P8_05_gpio_pu_pin>;
+		pinctrl-3 = <&P8_05_gpio_pd_pin>;
+		pinctrl-4 = <&P8_05_gpio_input_pin>;
+	};
+
+	/* P8_06 (ZCZ ball T8) emmc */
+	P8_06_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P8_06_default_pin>;
+		pinctrl-1 = <&P8_06_gpio_pin>;
+		pinctrl-2 = <&P8_06_gpio_pu_pin>;
+		pinctrl-3 = <&P8_06_gpio_pd_pin>;
+		pinctrl-4 = <&P8_06_gpio_input_pin>;
+	};
+
+	/* P8_07 (ZCZ ball R7) */
+	P8_07_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer";
+		pinctrl-0 = <&P8_07_default_pin>;
+		pinctrl-1 = <&P8_07_gpio_pin>;
+		pinctrl-2 = <&P8_07_gpio_pu_pin>;
+		pinctrl-3 = <&P8_07_gpio_pd_pin>;
+		pinctrl-4 = <&P8_07_gpio_input_pin>;
+		pinctrl-5 = <&P8_07_timer_pin>;
+	};
+
+	/* P8_08 (ZCZ ball T7) */
+	P8_08_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer";
+		pinctrl-0 = <&P8_08_default_pin>;
+		pinctrl-1 = <&P8_08_gpio_pin>;
+		pinctrl-2 = <&P8_08_gpio_pu_pin>;
+		pinctrl-3 = <&P8_08_gpio_pd_pin>;
+		pinctrl-4 = <&P8_08_gpio_input_pin>;
+		pinctrl-5 = <&P8_08_timer_pin>;
+	};
+
+	/* P8_09 (ZCZ ball T6) */
+	P8_09_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer";
+		pinctrl-0 = <&P8_09_default_pin>;
+		pinctrl-1 = <&P8_09_gpio_pin>;
+		pinctrl-2 = <&P8_09_gpio_pu_pin>;
+		pinctrl-3 = <&P8_09_gpio_pd_pin>;
+		pinctrl-4 = <&P8_09_gpio_input_pin>;
+		pinctrl-5 = <&P8_09_timer_pin>;
+	};
+
+	/* P8_10 (ZCZ ball U6) */
+	P8_10_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer";
+		pinctrl-0 = <&P8_10_default_pin>;
+		pinctrl-1 = <&P8_10_gpio_pin>;
+		pinctrl-2 = <&P8_10_gpio_pu_pin>;
+		pinctrl-3 = <&P8_10_gpio_pd_pin>;
+		pinctrl-4 = <&P8_10_gpio_input_pin>;
+		pinctrl-5 = <&P8_10_timer_pin>;
+	};
+
+	/* P8_11 (ZCZ ball R12) */
+	P8_11_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout";
+		pinctrl-0 = <&P8_11_default_pin>;
+		pinctrl-1 = <&P8_11_gpio_pin>;
+		pinctrl-2 = <&P8_11_gpio_pu_pin>;
+		pinctrl-3 = <&P8_11_gpio_pd_pin>;
+		pinctrl-4 = <&P8_11_gpio_input_pin>;
+		pinctrl-5 = <&P8_11_qep_pin>;
+		pinctrl-6 = <&P8_11_pruout_pin>;
+	};
+
+	/* P8_12 (ZCZ ball T12) */
+	P8_12_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout";
+		pinctrl-0 = <&P8_12_default_pin>;
+		pinctrl-1 = <&P8_12_gpio_pin>;
+		pinctrl-2 = <&P8_12_gpio_pu_pin>;
+		pinctrl-3 = <&P8_12_gpio_pd_pin>;
+		pinctrl-4 = <&P8_12_gpio_input_pin>;
+		pinctrl-5 = <&P8_12_qep_pin>;
+		pinctrl-6 = <&P8_12_pruout_pin>;
+	};
+
+	/* P8_13 (ZCZ ball T10) */
+	P8_13_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm";
+		pinctrl-0 = <&P8_13_default_pin>;
+		pinctrl-1 = <&P8_13_gpio_pin>;
+		pinctrl-2 = <&P8_13_gpio_pu_pin>;
+		pinctrl-3 = <&P8_13_gpio_pd_pin>;
+		pinctrl-4 = <&P8_13_gpio_input_pin>;
+		pinctrl-5 = <&P8_13_pwm_pin>;
+	};
+
+	/* P8_14 (ZCZ ball T11) */
+	P8_14_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm";
+		pinctrl-0 = <&P8_14_default_pin>;
+		pinctrl-1 = <&P8_14_gpio_pin>;
+		pinctrl-2 = <&P8_14_gpio_pu_pin>;
+		pinctrl-3 = <&P8_14_gpio_pd_pin>;
+		pinctrl-4 = <&P8_14_gpio_input_pin>;
+		pinctrl-5 = <&P8_14_pwm_pin>;
+	};
+
+	/* P8_15 (ZCZ ball U13) */
+	P8_15_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pru_ecap", "pruin";
+		pinctrl-0 = <&P8_15_default_pin>;
+		pinctrl-1 = <&P8_15_gpio_pin>;
+		pinctrl-2 = <&P8_15_gpio_pu_pin>;
+		pinctrl-3 = <&P8_15_gpio_pd_pin>;
+		pinctrl-4 = <&P8_15_gpio_input_pin>;
+		pinctrl-5 = <&P8_15_qep_pin>;
+		pinctrl-6 = <&P8_15_pru_ecap_pin>;
+		pinctrl-7 = <&P8_15_pruin_pin>;
+	};
+
+	/* P8_16 (ZCZ ball V13) */
+	P8_16_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruin";
+		pinctrl-0 = <&P8_16_default_pin>;
+		pinctrl-1 = <&P8_16_gpio_pin>;
+		pinctrl-2 = <&P8_16_gpio_pu_pin>;
+		pinctrl-3 = <&P8_16_gpio_pd_pin>;
+		pinctrl-4 = <&P8_16_gpio_input_pin>;
+		pinctrl-5 = <&P8_16_qep_pin>;
+		pinctrl-6 = <&P8_16_pruin_pin>;
+	};
+
+	/* P8_17 (ZCZ ball U12) */
+	P8_17_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm";
+		pinctrl-0 = <&P8_17_default_pin>;
+		pinctrl-1 = <&P8_17_gpio_pin>;
+		pinctrl-2 = <&P8_17_gpio_pu_pin>;
+		pinctrl-3 = <&P8_17_gpio_pd_pin>;
+		pinctrl-4 = <&P8_17_gpio_input_pin>;
+		pinctrl-5 = <&P8_17_pwm_pin>;
+	};
+
+	/* P8_18 (ZCZ ball V12) */
+	P8_18_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P8_18_default_pin>;
+		pinctrl-1 = <&P8_18_gpio_pin>;
+		pinctrl-2 = <&P8_18_gpio_pu_pin>;
+		pinctrl-3 = <&P8_18_gpio_pd_pin>;
+		pinctrl-4 = <&P8_18_gpio_input_pin>;
+	};
+
+	/* P8_19 (ZCZ ball U10) */
+	P8_19_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm";
+		pinctrl-0 = <&P8_19_default_pin>;
+		pinctrl-1 = <&P8_19_gpio_pin>;
+		pinctrl-2 = <&P8_19_gpio_pu_pin>;
+		pinctrl-3 = <&P8_19_gpio_pd_pin>;
+		pinctrl-4 = <&P8_19_gpio_input_pin>;
+		pinctrl-5 = <&P8_19_pwm_pin>;
+	};
+
+	/* P8_20 (ZCZ ball V9) emmc */
+	P8_20_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin";
+		pinctrl-0 = <&P8_20_default_pin>;
+		pinctrl-1 = <&P8_20_gpio_pin>;
+		pinctrl-2 = <&P8_20_gpio_pu_pin>;
+		pinctrl-3 = <&P8_20_gpio_pd_pin>;
+		pinctrl-4 = <&P8_20_gpio_input_pin>;
+		pinctrl-5 = <&P8_20_pruout_pin>;
+		pinctrl-6 = <&P8_20_pruin_pin>;
+	};
+
+	/* P8_21 (ZCZ ball U9) emmc */
+	P8_21_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin";
+		pinctrl-0 = <&P8_21_default_pin>;
+		pinctrl-1 = <&P8_21_gpio_pin>;
+		pinctrl-2 = <&P8_21_gpio_pu_pin>;
+		pinctrl-3 = <&P8_21_gpio_pd_pin>;
+		pinctrl-4 = <&P8_21_gpio_input_pin>;
+		pinctrl-5 = <&P8_21_pruout_pin>;
+		pinctrl-6 = <&P8_21_pruin_pin>;
+	};
+
+	/* P8_22 (ZCZ ball V8) emmc */
+	P8_22_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P8_22_default_pin>;
+		pinctrl-1 = <&P8_22_gpio_pin>;
+		pinctrl-2 = <&P8_22_gpio_pu_pin>;
+		pinctrl-3 = <&P8_22_gpio_pd_pin>;
+		pinctrl-4 = <&P8_22_gpio_input_pin>;
+	};
+
+	/* P8_23 (ZCZ ball U8) emmc */
+	P8_23_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P8_23_default_pin>;
+		pinctrl-1 = <&P8_23_gpio_pin>;
+		pinctrl-2 = <&P8_23_gpio_pu_pin>;
+		pinctrl-3 = <&P8_23_gpio_pd_pin>;
+		pinctrl-4 = <&P8_23_gpio_input_pin>;
+	};
+
+	/* P8_24 (ZCZ ball V7) emmc */
+	P8_24_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P8_24_default_pin>;
+		pinctrl-1 = <&P8_24_gpio_pin>;
+		pinctrl-2 = <&P8_24_gpio_pu_pin>;
+		pinctrl-3 = <&P8_24_gpio_pd_pin>;
+		pinctrl-4 = <&P8_24_gpio_input_pin>;
+	};
+
+	/* P8_25 (ZCZ ball U7) emmc */
+	P8_25_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P8_25_default_pin>;
+		pinctrl-1 = <&P8_25_gpio_pin>;
+		pinctrl-2 = <&P8_25_gpio_pu_pin>;
+		pinctrl-3 = <&P8_25_gpio_pd_pin>;
+		pinctrl-4 = <&P8_25_gpio_input_pin>;
+	};
+
+	/* P8_26 (ZCZ ball V6) */
+	P8_26_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P8_26_default_pin>;
+		pinctrl-1 = <&P8_26_gpio_pin>;
+		pinctrl-2 = <&P8_26_gpio_pu_pin>;
+		pinctrl-3 = <&P8_26_gpio_pd_pin>;
+		pinctrl-4 = <&P8_26_gpio_input_pin>;
+	};
+
+	/* P8_27 (ZCZ ball U5) hdmi */
+	P8_27_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin";
+		pinctrl-0 = <&P8_27_default_pin>;
+		pinctrl-1 = <&P8_27_gpio_pin>;
+		pinctrl-2 = <&P8_27_gpio_pu_pin>;
+		pinctrl-3 = <&P8_27_gpio_pd_pin>;
+		pinctrl-4 = <&P8_27_gpio_input_pin>;
+		pinctrl-5 = <&P8_27_pruout_pin>;
+		pinctrl-6 = <&P8_27_pruin_pin>;
+	};
+
+	/* P8_28 (ZCZ ball V5) hdmi */
+	P8_28_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin";
+		pinctrl-0 = <&P8_28_default_pin>;
+		pinctrl-1 = <&P8_28_gpio_pin>;
+		pinctrl-2 = <&P8_28_gpio_pu_pin>;
+		pinctrl-3 = <&P8_28_gpio_pd_pin>;
+		pinctrl-4 = <&P8_28_gpio_input_pin>;
+		pinctrl-5 = <&P8_28_pruout_pin>;
+		pinctrl-6 = <&P8_28_pruin_pin>;
+	};
+
+	/* P8_29 (ZCZ ball R5) hdmi */
+	P8_29_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin";
+		pinctrl-0 = <&P8_29_default_pin>;
+		pinctrl-1 = <&P8_29_gpio_pin>;
+		pinctrl-2 = <&P8_29_gpio_pu_pin>;
+		pinctrl-3 = <&P8_29_gpio_pd_pin>;
+		pinctrl-4 = <&P8_29_gpio_input_pin>;
+		pinctrl-5 = <&P8_29_pruout_pin>;
+		pinctrl-6 = <&P8_29_pruin_pin>;
+	};
+
+	/* P8_30 (ZCZ ball R6) hdmi */
+	P8_30_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin";
+		pinctrl-0 = <&P8_30_default_pin>;
+		pinctrl-1 = <&P8_30_gpio_pin>;
+		pinctrl-2 = <&P8_30_gpio_pu_pin>;
+		pinctrl-3 = <&P8_30_gpio_pd_pin>;
+		pinctrl-4 = <&P8_30_gpio_input_pin>;
+		pinctrl-5 = <&P8_30_pruout_pin>;
+		pinctrl-6 = <&P8_30_pruin_pin>;
+	};
+
+	/* P8_31 (ZCZ ball V4) hdmi */
+	P8_31_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "qep";
+		pinctrl-0 = <&P8_31_default_pin>;
+		pinctrl-1 = <&P8_31_gpio_pin>;
+		pinctrl-2 = <&P8_31_gpio_pu_pin>;
+		pinctrl-3 = <&P8_31_gpio_pd_pin>;
+		pinctrl-4 = <&P8_31_gpio_input_pin>;
+		pinctrl-5 = <&P8_31_uart_pin>;
+		pinctrl-6 = <&P8_31_qep_pin>;
+	};
+
+	/* P8_32 (ZCZ ball T5) hdmi */
+	P8_32_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep";
+		pinctrl-0 = <&P8_32_default_pin>;
+		pinctrl-1 = <&P8_32_gpio_pin>;
+		pinctrl-2 = <&P8_32_gpio_pu_pin>;
+		pinctrl-3 = <&P8_32_gpio_pd_pin>;
+		pinctrl-4 = <&P8_32_gpio_input_pin>;
+		pinctrl-5 = <&P8_32_qep_pin>;
+	};
+
+	/* P8_33 (ZCZ ball V3) hdmi */
+	P8_33_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep";
+		pinctrl-0 = <&P8_33_default_pin>;
+		pinctrl-1 = <&P8_33_gpio_pin>;
+		pinctrl-2 = <&P8_33_gpio_pu_pin>;
+		pinctrl-3 = <&P8_33_gpio_pd_pin>;
+		pinctrl-4 = <&P8_33_gpio_input_pin>;
+		pinctrl-5 = <&P8_33_qep_pin>;
+	};
+
+	/* P8_34 (ZCZ ball U4) hdmi */
+	P8_34_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm";
+		pinctrl-0 = <&P8_34_default_pin>;
+		pinctrl-1 = <&P8_34_gpio_pin>;
+		pinctrl-2 = <&P8_34_gpio_pu_pin>;
+		pinctrl-3 = <&P8_34_gpio_pd_pin>;
+		pinctrl-4 = <&P8_34_gpio_input_pin>;
+		pinctrl-5 = <&P8_34_pwm_pin>;
+	};
+
+	/* P8_35 (ZCZ ball V2) hdmi */
+	P8_35_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep";
+		pinctrl-0 = <&P8_35_default_pin>;
+		pinctrl-1 = <&P8_35_gpio_pin>;
+		pinctrl-2 = <&P8_35_gpio_pu_pin>;
+		pinctrl-3 = <&P8_35_gpio_pd_pin>;
+		pinctrl-4 = <&P8_35_gpio_input_pin>;
+		pinctrl-5 = <&P8_35_qep_pin>;
+	};
+
+	/* P8_36 (ZCZ ball U3) hdmi */
+	P8_36_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm";
+		pinctrl-0 = <&P8_36_default_pin>;
+		pinctrl-1 = <&P8_36_gpio_pin>;
+		pinctrl-2 = <&P8_36_gpio_pu_pin>;
+		pinctrl-3 = <&P8_36_gpio_pd_pin>;
+		pinctrl-4 = <&P8_36_gpio_input_pin>;
+		pinctrl-5 = <&P8_36_pwm_pin>;
+	};
+
+	/* P8_37 (ZCZ ball U1) hdmi */
+	P8_37_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "pwm";
+		pinctrl-0 = <&P8_37_default_pin>;
+		pinctrl-1 = <&P8_37_gpio_pin>;
+		pinctrl-2 = <&P8_37_gpio_pu_pin>;
+		pinctrl-3 = <&P8_37_gpio_pd_pin>;
+		pinctrl-4 = <&P8_37_gpio_input_pin>;
+		pinctrl-5 = <&P8_37_uart_pin>;
+		pinctrl-6 = <&P8_37_pwm_pin>;
+	};
+
+	/* P8_38 (ZCZ ball U2) hdmi */
+	P8_38_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "pwm";
+		pinctrl-0 = <&P8_38_default_pin>;
+		pinctrl-1 = <&P8_38_gpio_pin>;
+		pinctrl-2 = <&P8_38_gpio_pu_pin>;
+		pinctrl-3 = <&P8_38_gpio_pd_pin>;
+		pinctrl-4 = <&P8_38_gpio_input_pin>;
+		pinctrl-5 = <&P8_38_uart_pin>;
+		pinctrl-6 = <&P8_38_pwm_pin>;
+	};
+
+	/* P8_39 (ZCZ ball T3) hdmi */
+	P8_39_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin";
+		pinctrl-0 = <&P8_39_default_pin>;
+		pinctrl-1 = <&P8_39_gpio_pin>;
+		pinctrl-2 = <&P8_39_gpio_pu_pin>;
+		pinctrl-3 = <&P8_39_gpio_pd_pin>;
+		pinctrl-4 = <&P8_39_gpio_input_pin>;
+		pinctrl-5 = <&P8_39_qep_pin>;
+		pinctrl-6 = <&P8_39_pruout_pin>;
+		pinctrl-7 = <&P8_39_pruin_pin>;
+	};
+
+	/* P8_40 (ZCZ ball T4) hdmi */
+	P8_40_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin";
+		pinctrl-0 = <&P8_40_default_pin>;
+		pinctrl-1 = <&P8_40_gpio_pin>;
+		pinctrl-2 = <&P8_40_gpio_pu_pin>;
+		pinctrl-3 = <&P8_40_gpio_pd_pin>;
+		pinctrl-4 = <&P8_40_gpio_input_pin>;
+		pinctrl-5 = <&P8_40_qep_pin>;
+		pinctrl-6 = <&P8_40_pruout_pin>;
+		pinctrl-7 = <&P8_40_pruin_pin>;
+	};
+
+	/* P8_41 (ZCZ ball T1) hdmi */
+	P8_41_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin";
+		pinctrl-0 = <&P8_41_default_pin>;
+		pinctrl-1 = <&P8_41_gpio_pin>;
+		pinctrl-2 = <&P8_41_gpio_pu_pin>;
+		pinctrl-3 = <&P8_41_gpio_pd_pin>;
+		pinctrl-4 = <&P8_41_gpio_input_pin>;
+		pinctrl-5 = <&P8_41_qep_pin>;
+		pinctrl-6 = <&P8_41_pruout_pin>;
+		pinctrl-7 = <&P8_41_pruin_pin>;
+	};
+
+	/* P8_42 (ZCZ ball T2) hdmi */
+	P8_42_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin";
+		pinctrl-0 = <&P8_42_default_pin>;
+		pinctrl-1 = <&P8_42_gpio_pin>;
+		pinctrl-2 = <&P8_42_gpio_pu_pin>;
+		pinctrl-3 = <&P8_42_gpio_pd_pin>;
+		pinctrl-4 = <&P8_42_gpio_input_pin>;
+		pinctrl-5 = <&P8_42_qep_pin>;
+		pinctrl-6 = <&P8_42_pruout_pin>;
+		pinctrl-7 = <&P8_42_pruin_pin>;
+	};
+
+	/* P8_43 (ZCZ ball R3) hdmi */
+	P8_43_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm", "pruout", "pruin";
+		pinctrl-0 = <&P8_43_default_pin>;
+		pinctrl-1 = <&P8_43_gpio_pin>;
+		pinctrl-2 = <&P8_43_gpio_pu_pin>;
+		pinctrl-3 = <&P8_43_gpio_pd_pin>;
+		pinctrl-4 = <&P8_43_gpio_input_pin>;
+		pinctrl-5 = <&P8_43_pwm_pin>;
+		pinctrl-6 = <&P8_43_pruout_pin>;
+		pinctrl-7 = <&P8_43_pruin_pin>;
+	};
+
+	/* P8_44 (ZCZ ball R4) hdmi */
+	P8_44_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm", "pruout", "pruin";
+		pinctrl-0 = <&P8_44_default_pin>;
+		pinctrl-1 = <&P8_44_gpio_pin>;
+		pinctrl-2 = <&P8_44_gpio_pu_pin>;
+		pinctrl-3 = <&P8_44_gpio_pd_pin>;
+		pinctrl-4 = <&P8_44_gpio_input_pin>;
+		pinctrl-5 = <&P8_44_pwm_pin>;
+		pinctrl-6 = <&P8_44_pruout_pin>;
+		pinctrl-7 = <&P8_44_pruin_pin>;
+	};
+
+	/* P8_45 (ZCZ ball R1) hdmi */
+	P8_45_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm", "pruout", "pruin";
+		pinctrl-0 = <&P8_45_default_pin>;
+		pinctrl-1 = <&P8_45_gpio_pin>;
+		pinctrl-2 = <&P8_45_gpio_pu_pin>;
+		pinctrl-3 = <&P8_45_gpio_pd_pin>;
+		pinctrl-4 = <&P8_45_gpio_input_pin>;
+		pinctrl-5 = <&P8_45_pwm_pin>;
+		pinctrl-6 = <&P8_45_pruout_pin>;
+		pinctrl-7 = <&P8_45_pruin_pin>;
+	};
+
+	/* P8_46 (ZCZ ball R2) hdmi */
+	P8_46_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm", "pruout", "pruin";
+		pinctrl-0 = <&P8_46_default_pin>;
+		pinctrl-1 = <&P8_46_gpio_pin>;
+		pinctrl-2 = <&P8_46_gpio_pu_pin>;
+		pinctrl-3 = <&P8_46_gpio_pd_pin>;
+		pinctrl-4 = <&P8_46_gpio_input_pin>;
+		pinctrl-5 = <&P8_46_pwm_pin>;
+		pinctrl-6 = <&P8_46_pruout_pin>;
+		pinctrl-7 = <&P8_46_pruin_pin>;
+	};
+
+	/************************/
+	/* P9 Header */
+	/************************/
+
+	/* P9_01                GND */
+
+	/* P9_02                GND */
+
+	/* P9_03                3V3 */
+
+	/* P9_04                3V3 */
+
+	/* P9_05                VDD_5V */
+
+	/* P9_06                VDD_5V */
+
+	/* P9_07                SYS_5V */
+
+	/* P9_08                SYS_5V */
+
+	/* P9_09                PWR_BUT */
+
+	/* P9_10                RSTn */
+
+	/* P9_11 (ZCZ ball T17) */
+	P9_11_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart";
+		pinctrl-0 = <&P9_11_default_pin>;
+		pinctrl-1 = <&P9_11_gpio_pin>;
+		pinctrl-2 = <&P9_11_gpio_pu_pin>;
+		pinctrl-3 = <&P9_11_gpio_pd_pin>;
+		pinctrl-4 = <&P9_11_gpio_input_pin>;
+		pinctrl-5 = <&P9_11_uart_pin>;
+	};
+
+	/* P9_12 (ZCZ ball U18) */
+	P9_12_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P9_12_default_pin>;
+		pinctrl-1 = <&P9_12_gpio_pin>;
+		pinctrl-2 = <&P9_12_gpio_pu_pin>;
+		pinctrl-3 = <&P9_12_gpio_pd_pin>;
+		pinctrl-4 = <&P9_12_gpio_input_pin>;
+	};
+
+	/* P9_13 (ZCZ ball U17) */
+	P9_13_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart";
+		pinctrl-0 = <&P9_13_default_pin>;
+		pinctrl-1 = <&P9_13_gpio_pin>;
+		pinctrl-2 = <&P9_13_gpio_pu_pin>;
+		pinctrl-3 = <&P9_13_gpio_pd_pin>;
+		pinctrl-4 = <&P9_13_gpio_input_pin>;
+		pinctrl-5 = <&P9_13_uart_pin>;
+	};
+
+	/* P9_14 (ZCZ ball U14) */
+	P9_14_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm";
+		pinctrl-0 = <&P9_14_default_pin>;
+		pinctrl-1 = <&P9_14_gpio_pin>;
+		pinctrl-2 = <&P9_14_gpio_pu_pin>;
+		pinctrl-3 = <&P9_14_gpio_pd_pin>;
+		pinctrl-4 = <&P9_14_gpio_input_pin>;
+		pinctrl-5 = <&P9_14_pwm_pin>;
+	};
+
+	/* P9_15 (ZCZ ball R13) */
+	P9_15_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm";
+		pinctrl-0 = <&P9_15_default_pin>;
+		pinctrl-1 = <&P9_15_gpio_pin>;
+		pinctrl-2 = <&P9_15_gpio_pu_pin>;
+		pinctrl-3 = <&P9_15_gpio_pd_pin>;
+		pinctrl-4 = <&P9_15_gpio_input_pin>;
+		pinctrl-5 = <&P9_15_pwm_pin>;
+	};
+
+	/* P9_16 (ZCZ ball T14) */
+	P9_16_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm";
+		pinctrl-0 = <&P9_16_default_pin>;
+		pinctrl-1 = <&P9_16_gpio_pin>;
+		pinctrl-2 = <&P9_16_gpio_pu_pin>;
+		pinctrl-3 = <&P9_16_gpio_pd_pin>;
+		pinctrl-4 = <&P9_16_gpio_input_pin>;
+		pinctrl-5 = <&P9_16_pwm_pin>;
+	};
+
+	/* P9_17 (ZCZ ball A16) */
+	P9_17_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "i2c", "pwm", "pru_uart";
+		pinctrl-0 = <&P9_17_default_pin>;
+		pinctrl-1 = <&P9_17_gpio_pin>;
+		pinctrl-2 = <&P9_17_gpio_pu_pin>;
+		pinctrl-3 = <&P9_17_gpio_pd_pin>;
+		pinctrl-4 = <&P9_17_gpio_input_pin>;
+		pinctrl-5 = <&P9_17_spi_cs_pin>;
+		pinctrl-6 = <&P9_17_i2c_pin>;
+		pinctrl-7 = <&P9_17_pwm_pin>;
+		pinctrl-8 = <&P9_17_pru_uart_pin>;
+	};
+
+	/* P9_18 (ZCZ ball B16) */
+	P9_18_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "i2c", "pwm", "pru_uart";
+		pinctrl-0 = <&P9_18_default_pin>;
+		pinctrl-1 = <&P9_18_gpio_pin>;
+		pinctrl-2 = <&P9_18_gpio_pu_pin>;
+		pinctrl-3 = <&P9_18_gpio_pd_pin>;
+		pinctrl-4 = <&P9_18_gpio_input_pin>;
+		pinctrl-5 = <&P9_18_spi_pin>;
+		pinctrl-6 = <&P9_18_i2c_pin>;
+		pinctrl-7 = <&P9_18_pwm_pin>;
+		pinctrl-8 = <&P9_18_pru_uart_pin>;
+	};
+
+	/* P9_19 (ZCZ ball D17) i2c */
+	P9_19_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "can", "i2c", "pru_uart", "timer";
+		pinctrl-0 = <&P9_19_default_pin>;
+		pinctrl-1 = <&P9_19_gpio_pin>;
+		pinctrl-2 = <&P9_19_gpio_pu_pin>;
+		pinctrl-3 = <&P9_19_gpio_pd_pin>;
+		pinctrl-4 = <&P9_19_gpio_input_pin>;
+		pinctrl-5 = <&P9_19_spi_cs_pin>;
+		pinctrl-6 = <&P9_19_can_pin>;
+		pinctrl-7 = <&P9_19_i2c_pin>;
+		pinctrl-8 = <&P9_19_pru_uart_pin>;
+		pinctrl-9 = <&P9_19_timer_pin>;
+	};
+
+	/* P9_20 (ZCZ ball D18) i2c */
+	P9_20_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "can", "i2c", "pru_uart", "timer";
+		pinctrl-0 = <&P9_20_default_pin>;
+		pinctrl-1 = <&P9_20_gpio_pin>;
+		pinctrl-2 = <&P9_20_gpio_pu_pin>;
+		pinctrl-3 = <&P9_20_gpio_pd_pin>;
+		pinctrl-4 = <&P9_20_gpio_input_pin>;
+		pinctrl-5 = <&P9_20_spi_cs_pin>;
+		pinctrl-6 = <&P9_20_can_pin>;
+		pinctrl-7 = <&P9_20_i2c_pin>;
+		pinctrl-8 = <&P9_20_pru_uart_pin>;
+		pinctrl-9 = <&P9_20_timer_pin>;
+	};
+
+	/* P9_21 (ZCZ ball B17) */
+	P9_21_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "uart", "i2c", "pwm", "pru_uart";
+		pinctrl-0 = <&P9_21_default_pin>;
+		pinctrl-1 = <&P9_21_gpio_pin>;
+		pinctrl-2 = <&P9_21_gpio_pu_pin>;
+		pinctrl-3 = <&P9_21_gpio_pd_pin>;
+		pinctrl-4 = <&P9_21_gpio_input_pin>;
+		pinctrl-5 = <&P9_21_spi_pin>;
+		pinctrl-6 = <&P9_21_uart_pin>;
+		pinctrl-7 = <&P9_21_i2c_pin>;
+		pinctrl-8 = <&P9_21_pwm_pin>;
+		pinctrl-9 = <&P9_21_pru_uart_pin>;
+	};
+
+	/* P9_22 (ZCZ ball A17) */
+	P9_22_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_sclk", "uart", "i2c", "pwm", "pru_uart";
+		pinctrl-0 = <&P9_22_default_pin>;
+		pinctrl-1 = <&P9_22_gpio_pin>;
+		pinctrl-2 = <&P9_22_gpio_pu_pin>;
+		pinctrl-3 = <&P9_22_gpio_pd_pin>;
+		pinctrl-4 = <&P9_22_gpio_input_pin>;
+		pinctrl-5 = <&P9_22_spi_sclk_pin>;
+		pinctrl-6 = <&P9_22_uart_pin>;
+		pinctrl-7 = <&P9_22_i2c_pin>;
+		pinctrl-8 = <&P9_22_pwm_pin>;
+		pinctrl-9 = <&P9_22_pru_uart_pin>;
+	};
+
+	/* P9_23 (ZCZ ball V14) */
+	P9_23_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm";
+		pinctrl-0 = <&P9_23_default_pin>;
+		pinctrl-1 = <&P9_23_gpio_pin>;
+		pinctrl-2 = <&P9_23_gpio_pu_pin>;
+		pinctrl-3 = <&P9_23_gpio_pd_pin>;
+		pinctrl-4 = <&P9_23_gpio_input_pin>;
+		pinctrl-5 = <&P9_23_pwm_pin>;
+	};
+
+	/* P9_24 (ZCZ ball D15) */
+	P9_24_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "can", "i2c", "pru_uart", "pruin";
+		pinctrl-0 = <&P9_24_default_pin>;
+		pinctrl-1 = <&P9_24_gpio_pin>;
+		pinctrl-2 = <&P9_24_gpio_pu_pin>;
+		pinctrl-3 = <&P9_24_gpio_pd_pin>;
+		pinctrl-4 = <&P9_24_gpio_input_pin>;
+		pinctrl-5 = <&P9_24_uart_pin>;
+		pinctrl-6 = <&P9_24_can_pin>;
+		pinctrl-7 = <&P9_24_i2c_pin>;
+		pinctrl-8 = <&P9_24_pru_uart_pin>;
+		pinctrl-9 = <&P9_24_pruin_pin>;
+	};
+
+	/* P9_25 (ZCZ ball A14) audio */
+	P9_25_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin";
+		pinctrl-0 = <&P9_25_default_pin>;
+		pinctrl-1 = <&P9_25_gpio_pin>;
+		pinctrl-2 = <&P9_25_gpio_pu_pin>;
+		pinctrl-3 = <&P9_25_gpio_pd_pin>;
+		pinctrl-4 = <&P9_25_gpio_input_pin>;
+		pinctrl-5 = <&P9_25_qep_pin>;
+		pinctrl-6 = <&P9_25_pruout_pin>;
+		pinctrl-7 = <&P9_25_pruin_pin>;
+	};
+
+	/* P9_26 (ZCZ ball D16) */
+	P9_26_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "can", "i2c", "pru_uart", "pruin";
+		pinctrl-0 = <&P9_26_default_pin>;
+		pinctrl-1 = <&P9_26_gpio_pin>;
+		pinctrl-2 = <&P9_26_gpio_pu_pin>;
+		pinctrl-3 = <&P9_26_gpio_pd_pin>;
+		pinctrl-4 = <&P9_26_gpio_input_pin>;
+		pinctrl-5 = <&P9_26_uart_pin>;
+		pinctrl-6 = <&P9_26_can_pin>;
+		pinctrl-7 = <&P9_26_i2c_pin>;
+		pinctrl-8 = <&P9_26_pru_uart_pin>;
+		pinctrl-9 = <&P9_26_pruin_pin>;
+	};
+
+	/* P9_27 (ZCZ ball C13) */
+	P9_27_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin";
+		pinctrl-0 = <&P9_27_default_pin>;
+		pinctrl-1 = <&P9_27_gpio_pin>;
+		pinctrl-2 = <&P9_27_gpio_pu_pin>;
+		pinctrl-3 = <&P9_27_gpio_pd_pin>;
+		pinctrl-4 = <&P9_27_gpio_input_pin>;
+		pinctrl-5 = <&P9_27_qep_pin>;
+		pinctrl-6 = <&P9_27_pruout_pin>;
+		pinctrl-7 = <&P9_27_pruin_pin>;
+	};
+
+	/* P9_28 (ZCZ ball C12) audio */
+	P9_28_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "pwm", "pwm2", "pruout", "pruin";
+		pinctrl-0 = <&P9_28_default_pin>;
+		pinctrl-1 = <&P9_28_gpio_pin>;
+		pinctrl-2 = <&P9_28_gpio_pu_pin>;
+		pinctrl-3 = <&P9_28_gpio_pd_pin>;
+		pinctrl-4 = <&P9_28_gpio_input_pin>;
+		pinctrl-5 = <&P9_28_spi_cs_pin>;
+		pinctrl-6 = <&P9_28_pwm_pin>;
+		pinctrl-7 = <&P9_28_pwm2_pin>;
+		pinctrl-8 = <&P9_28_pruout_pin>;
+		pinctrl-9 = <&P9_28_pruin_pin>;
+	};
+
+	/* P9_29 (ZCZ ball B13) audio */
+	P9_29_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "pwm", "pruout", "pruin";
+		pinctrl-0 = <&P9_29_default_pin>;
+		pinctrl-1 = <&P9_29_gpio_pin>;
+		pinctrl-2 = <&P9_29_gpio_pu_pin>;
+		pinctrl-3 = <&P9_29_gpio_pd_pin>;
+		pinctrl-4 = <&P9_29_gpio_input_pin>;
+		pinctrl-5 = <&P9_29_spi_pin>;
+		pinctrl-6 = <&P9_29_pwm_pin>;
+		pinctrl-7 = <&P9_29_pruout_pin>;
+		pinctrl-8 = <&P9_29_pruin_pin>;
+	};
+
+	/* P9_30 (ZCZ ball D12) */
+	P9_30_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "pwm", "pruout", "pruin";
+		pinctrl-0 = <&P9_30_default_pin>;
+		pinctrl-1 = <&P9_30_gpio_pin>;
+		pinctrl-2 = <&P9_30_gpio_pu_pin>;
+		pinctrl-3 = <&P9_30_gpio_pd_pin>;
+		pinctrl-4 = <&P9_30_gpio_input_pin>;
+		pinctrl-5 = <&P9_30_spi_pin>;
+		pinctrl-6 = <&P9_30_pwm_pin>;
+		pinctrl-7 = <&P9_30_pruout_pin>;
+		pinctrl-8 = <&P9_30_pruin_pin>;
+	};
+
+	/* P9_31 (ZCZ ball A13) audio */
+	P9_31_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_sclk", "pwm", "pruout", "pruin";
+		pinctrl-0 = <&P9_31_default_pin>;
+		pinctrl-1 = <&P9_31_gpio_pin>;
+		pinctrl-2 = <&P9_31_gpio_pu_pin>;
+		pinctrl-3 = <&P9_31_gpio_pd_pin>;
+		pinctrl-4 = <&P9_31_gpio_input_pin>;
+		pinctrl-5 = <&P9_31_spi_sclk_pin>;
+		pinctrl-6 = <&P9_31_pwm_pin>;
+		pinctrl-7 = <&P9_31_pruout_pin>;
+		pinctrl-8 = <&P9_31_pruin_pin>;
+	};
+
+	/* P9_32                VADC */
+
+	/* P9_33 (ZCZ ball C8)  AIN4         */
+
+	/* P9_34                AGND */
+
+	/* P9_35 (ZCZ ball A8)  AIN6         */
+
+	/* P9_36 (ZCZ ball B8)  AIN5         */
+
+	/* P9_37 (ZCZ ball B7)  AIN2         */
+
+	/* P9_38 (ZCZ ball A7)  AIN3         */
+
+	/* P9_39 (ZCZ ball B6)  AIN0         */
+
+	/* P9_40 (ZCZ ball C7)  AIN1         */
+
+	/* P9_41 (ZCZ ball D14) */
+	P9_41_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer", "pruin";
+		pinctrl-0 = <&P9_41_default_pin>;
+		pinctrl-1 = <&P9_41_gpio_pin>;
+		pinctrl-2 = <&P9_41_gpio_pu_pin>;
+		pinctrl-3 = <&P9_41_gpio_pd_pin>;
+		pinctrl-4 = <&P9_41_gpio_input_pin>;
+		pinctrl-5 = <&P9_41_timer_pin>;
+		pinctrl-6 = <&P9_41_pruin_pin>;
+	};
+
+	/* P9_41.1 */
+	/* P9_91 (ZCZ ball D13) */
+	P9_91_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin";
+		pinctrl-0 = <&P9_91_default_pin>;
+		pinctrl-1 = <&P9_91_gpio_pin>;
+		pinctrl-2 = <&P9_91_gpio_pu_pin>;
+		pinctrl-3 = <&P9_91_gpio_pd_pin>;
+		pinctrl-4 = <&P9_91_gpio_input_pin>;
+		pinctrl-5 = <&P9_91_qep_pin>;
+		pinctrl-6 = <&P9_91_pruout_pin>;
+		pinctrl-7 = <&P9_91_pruin_pin>;
+	};
+
+	/* P9_42 (ZCZ ball C18) */
+	P9_42_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "spi_sclk", "uart", "pwm", "pru_ecap";
+		pinctrl-0 = <&P9_42_default_pin>;
+		pinctrl-1 = <&P9_42_gpio_pin>;
+		pinctrl-2 = <&P9_42_gpio_pu_pin>;
+		pinctrl-3 = <&P9_42_gpio_pd_pin>;
+		pinctrl-4 = <&P9_42_gpio_input_pin>;
+		pinctrl-5 = <&P9_42_spi_cs_pin>;
+		pinctrl-6 = <&P9_42_spi_sclk_pin>;
+		pinctrl-7 = <&P9_42_uart_pin>;
+		pinctrl-8 = <&P9_42_pwm_pin>;
+		pinctrl-9 = <&P9_42_pru_ecap_pin>;
+	};
+
+	/* P9_42.1 */
+	/* P9_92 (ZCZ ball B12) */
+	P9_92_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin";
+		pinctrl-0 = <&P9_92_default_pin>;
+		pinctrl-1 = <&P9_92_gpio_pin>;
+		pinctrl-2 = <&P9_92_gpio_pu_pin>;
+		pinctrl-3 = <&P9_92_gpio_pd_pin>;
+		pinctrl-4 = <&P9_92_gpio_input_pin>;
+		pinctrl-5 = <&P9_92_qep_pin>;
+		pinctrl-6 = <&P9_92_pruout_pin>;
+		pinctrl-7 = <&P9_92_pruin_pin>;
+	};
+
+	/* P9_43                GND */
+
+	/* P9_44                GND */
+
+	/* P9_45                GND */
+
+	/* P9_46                GND */
+
+	cape-universal {
+		compatible = "gpio-of-helper";
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <>;
+
+		P8_03 {
+			gpio-name = "P8_03";
+			gpio = <&gpio1 6 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_04 {
+			gpio-name = "P8_04";
+			gpio = <&gpio1 7 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_05 {
+			gpio-name = "P8_05";
+			gpio = <&gpio1 2 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_06 {
+			gpio-name = "P8_06";
+			gpio = <&gpio1 3 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_07 {
+			gpio-name = "P8_07";
+			gpio = <&gpio2 2 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_08 {
+			gpio-name = "P8_08";
+			gpio = <&gpio2 3 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_09 {
+			gpio-name = "P8_09";
+			gpio = <&gpio2 5 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_10 {
+			gpio-name = "P8_10";
+			gpio = <&gpio2 4 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_11 {
+			gpio-name = "P8_11";
+			gpio = <&gpio1 13 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_12 {
+			gpio-name = "P8_12";
+			gpio = <&gpio1 12 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_13 {
+			gpio-name = "P8_13";
+			gpio = <&gpio0 23 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_14 {
+			gpio-name = "P8_14";
+			gpio = <&gpio0 26 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_15 {
+			gpio-name = "P8_15";
+			gpio = <&gpio1 15 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_16 {
+			gpio-name = "P8_16";
+			gpio = <&gpio1 14 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_17 {
+			gpio-name = "P8_17";
+			gpio = <&gpio0 27 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_18 {
+			gpio-name = "P8_18";
+			gpio = <&gpio2 1 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_19 {
+			gpio-name = "P8_19";
+			gpio = <&gpio0 22 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_20 {
+			gpio-name = "P8_20";
+			gpio = <&gpio1 31 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_21 {
+			gpio-name = "P8_21";
+			gpio = <&gpio1 30 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_22 {
+			gpio-name = "P8_22";
+			gpio = <&gpio1 5 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_23 {
+			gpio-name = "P8_23";
+			gpio = <&gpio1 4 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_24 {
+			gpio-name = "P8_24";
+			gpio = <&gpio1 1 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_25 {
+			gpio-name = "P8_25";
+			gpio = <&gpio1 0 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_26 {
+			gpio-name = "P8_26";
+			gpio = <&gpio1 29 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_27 {
+			gpio-name = "P8_27";
+			gpio = <&gpio2 22 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_28 {
+			gpio-name = "P8_28";
+			gpio = <&gpio2 24 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_29 {
+			gpio-name = "P8_29";
+			gpio = <&gpio2 23 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_30 {
+			gpio-name = "P8_30";
+			gpio = <&gpio2 25 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_31 {
+			gpio-name = "P8_31";
+			gpio = <&gpio0 10 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_32 {
+			gpio-name = "P8_32";
+			gpio = <&gpio0 11 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_33 {
+			gpio-name = "P8_33";
+			gpio = <&gpio0 9 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_34 {
+			gpio-name = "P8_34";
+			gpio = <&gpio2 17 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_35 {
+			gpio-name = "P8_35";
+			gpio = <&gpio0 8 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_36 {
+			gpio-name = "P8_36";
+			gpio = <&gpio2 16 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_37 {
+			gpio-name = "P8_37";
+			gpio = <&gpio2 14 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_38 {
+			gpio-name = "P8_38";
+			gpio = <&gpio2 15 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_39 {
+			gpio-name = "P8_39";
+			gpio = <&gpio2 12 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_40 {
+			gpio-name = "P8_40";
+			gpio = <&gpio2 13 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_41 {
+			gpio-name = "P8_41";
+			gpio = <&gpio2 10 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_42 {
+			gpio-name = "P8_42";
+			gpio = <&gpio2 11 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_43 {
+			gpio-name = "P8_43";
+			gpio = <&gpio2 8 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_44 {
+			gpio-name = "P8_44";
+			gpio = <&gpio2 9 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_45 {
+			gpio-name = "P8_45";
+			gpio = <&gpio2 6 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_46 {
+			gpio-name = "P8_46";
+			gpio = <&gpio2 7 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_11 {
+			gpio-name = "P9_11";
+			gpio = <&gpio0 30 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_12 {
+			gpio-name = "P9_12";
+			gpio = <&gpio1 28 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_13 {
+			gpio-name = "P9_13";
+			gpio = <&gpio0 31 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_14 {
+			gpio-name = "P9_14";
+			gpio = <&gpio1 18 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_15 {
+			gpio-name = "P9_15";
+			gpio = <&gpio1 16 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_16 {
+			gpio-name = "P9_16";
+			gpio = <&gpio1 19 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_17 {
+			gpio-name = "P9_17";
+			gpio = <&gpio0 5 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_18 {
+			gpio-name = "P9_18";
+			gpio = <&gpio0 4 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_19 {
+			gpio-name = "P9_19";
+			gpio = <&gpio0 13 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_20 {
+			gpio-name = "P9_20";
+			gpio = <&gpio0 12 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_21 {
+			gpio-name = "P9_21";
+			gpio = <&gpio0 3 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_22 {
+			gpio-name = "P9_22";
+			gpio = <&gpio0 2 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_23 {
+			gpio-name = "P9_23";
+			gpio = <&gpio1 17 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_24 {
+			gpio-name = "P9_24";
+			gpio = <&gpio0 15 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_25 {
+			gpio-name = "P9_25";
+			gpio = <&gpio3 21 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_26 {
+			gpio-name = "P9_26";
+			gpio = <&gpio0 14 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_27 {
+			gpio-name = "P9_27";
+			gpio = <&gpio3 19 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_28 {
+			gpio-name = "P9_28";
+			gpio = <&gpio3 17 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_29 {
+			gpio-name = "P9_29";
+			gpio = <&gpio3 15 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_30 {
+			gpio-name = "P9_30";
+			gpio = <&gpio3 16 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_31 {
+			gpio-name = "P9_31";
+			gpio = <&gpio3 14 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_41 {
+			gpio-name = "P9_41";
+			gpio = <&gpio0 20 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_91 {
+			gpio-name = "P9_91";
+			gpio = <&gpio3 20 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_42 {
+			gpio-name = "P9_42";
+			gpio = <&gpio0 7 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_92 {
+			gpio-name = "P9_92";
+			gpio = <&gpio3 18 0>;
+			input;
+			dir-changeable;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 56ae5095a..d02023fbe 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -26,14 +26,14 @@ leds {
 		compatible = "gpio-leds";
 
 		led2 {
-			label = "beaglebone:green:heartbeat";
+			label = "beaglebone:green:usr0";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
 		led3 {
-			label = "beaglebone:green:mmc0";
+			label = "beaglebone:green:usr1";
 			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
@@ -63,9 +63,6 @@ vmmcsd_fixed: fixedregulator0 {
 };
 
 &am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&clkout2_pin>;
-
 	user_leds_s0: user_leds_s0 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
@@ -96,12 +93,6 @@ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	clkout2_pin: pinmux_clkout2_pin {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-		>;
-	};
-
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
@@ -189,6 +180,7 @@ &uart0 {
 	pinctrl-0 = <&uart0_pins>;
 
 	status = "okay";
+	symlink = "bone/uart/0";
 };
 
 &usb0 {
@@ -207,6 +199,7 @@ &i2c0 {
 
 	status = "okay";
 	clock-frequency = <400000>;
+	symlink = "bone/i2c/0";
 
 	tps: tps@24 {
 		reg = <0x24>;
@@ -230,6 +223,7 @@ &i2c2 {
 
 	status = "okay";
 	clock-frequency = <100000>;
+	symlink = "bone/i2c/2";
 
 	cape_eeprom0: cape_eeprom0@54 {
 		compatible = "atmel,24c256";
@@ -405,3 +399,12 @@ &rtc {
 &pruss_tm {
 	status = "okay";
 };
+
+&tscadc {
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+		ti,chan-step-avg = <16 16 16 16 16 16 16 16>;
+		ti,chan-step-opendelay = <0x98 0x98 0x98 0x98 0x98 0x98 0x98 0x98>;
+		ti,chan-step-sampledelay = <0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-bone-uboot-univ.dts b/arch/arm/boot/dts/am335x-bone-uboot-univ.dts
new file mode 100644
index 000000000..ac9f25702
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-bone-uboot-univ.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-bone-common-univ.dtsi"
+
+/ {
+	model = "TI AM335x BeagleBone";
+	compatible = "ti,am335x-bone", "ti,am33xx";
+
+	chosen {
+		base_dtb = "am335x-bone-uboot-univ.dts";
+		base_dtb_timestamp = __TIMESTAMP__;
+	};
+};
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-always-on;
+};
+
+&mmc1 {
+	vmmc-supply = <&ldo3_reg>;
+};
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index b5d85ef51..ea138cb34 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -10,6 +10,11 @@
 / {
 	model = "TI AM335x BeagleBone";
 	compatible = "ti,am335x-bone", "ti,am33xx";
+
+	chosen {
+		base_dtb = "am335x-bone.dts";
+		base_dtb_timestamp = __TIMESTAMP__;
+	};
 };
 
 &ldo3_reg {
diff --git a/arch/arm/boot/dts/am335x-boneblack-uboot-univ.dts b/arch/arm/boot/dts/am335x-boneblack-uboot-univ.dts
new file mode 100644
index 000000000..8bf3f9d40
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-boneblack-uboot-univ.dts
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-bone-common-univ.dtsi"
+
+/ {
+	model = "TI AM335x BeagleBone Black";
+	compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+
+	chosen {
+		base_dtb = "am335x-boneblack-uboot-univ.dts";
+		base_dtb_timestamp = __TIMESTAMP__;
+	};
+};
+
+&cpu0_opp_table {
+	/*
+	 * All PG 2.0 silicon may not support 1GHz but some of the early
+	 * BeagleBone Blacks have PG 2.0 silicon which is guaranteed
+	 * to support 1GHz OPP so enable it for PG 2.0 on this board.
+	 */
+	oppnitro-1000000000 {
+		opp-supported-hw = <0x06 0x0100>;
+	};
+};
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&gpio0 {
+	gpio-line-names =
+		"[mdio_data]",
+		"[mdio_clk]",
+		"P9_22 [spi0_sclk]",
+		"P9_21 [spi0_d0]",
+		"P9_18 [spi0_d1]",
+		"P9_17 [spi0_cs0]",
+		"[mmc0_cd]",
+		"P8_42A [ecappwm0]",
+		"P8_35 [lcd d12]",
+		"P8_33 [lcd d13]",
+		"P8_31 [lcd d14]",
+		"P8_32 [lcd d15]",
+		"P9_20 [i2c2_sda]",
+		"P9_19 [i2c2_scl]",
+		"P9_26 [uart1_rxd]",
+		"P9_24 [uart1_txd]",
+		"[rmii1_txd3]",
+		"[rmii1_txd2]",
+		"[usb0_drvvbus]",
+		"[hdmi cec]",
+		"P9_41B",
+		"[rmii1_txd1]",
+		"P8_19 [ehrpwm2a]",
+		"P8_13 [ehrpwm2b]",
+		"NC",
+		"NC",
+		"P8_14",
+		"P8_17",
+		"[rmii1_txd0]",
+		"[rmii1_refclk]",
+		"P9_11 [uart4_rxd]",
+		"P9_13 [uart4_txd]";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"P8_25 [mmc1_dat0]",
+		"[mmc1_dat1]",
+		"P8_5 [mmc1_dat2]",
+		"P8_6 [mmc1_dat3]",
+		"P8_23 [mmc1_dat4]",
+		"P8_22 [mmc1_dat5]",
+		"P8_3 [mmc1_dat6]",
+		"P8_4 [mmc1_dat7]",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"P8_12",
+		"P8_11",
+		"P8_16",
+		"P8_15",
+		"P9_15A",
+		"P9_23",
+		"P9_14 [ehrpwm1a]",
+		"P9_16 [ehrpwm1b]",
+		"[emmc rst]",
+		"[usr0 led]",
+		"[usr1 led]",
+		"[usr2 led]",
+		"[usr3 led]",
+		"[hdmi irq]",
+		"[usb vbus oc]",
+		"[hdmi audio]",
+		"P9_12",
+		"P8_26",
+		"P8_21 [emmc]",
+		"P8_20 [emmc]";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"P9_15B",
+		"P8_18",
+		"P8_7",
+		"P8_8",
+		"P8_10",
+		"P8_9",
+		"P8_45 [hdmi]",
+		"P8_46 [hdmi]",
+		"P8_43 [hdmi]",
+		"P8_44 [hdmi]",
+		"P8_41 [hdmi]",
+		"P8_42 [hdmi]",
+		"P8_39 [hdmi]",
+		"P8_40 [hdmi]",
+		"P8_37 [hdmi]",
+		"P8_38 [hdmi]",
+		"P8_36 [hdmi]",
+		"P8_34 [hdmi]",
+		"[rmii1_rxd3]",
+		"[rmii1_rxd2]",
+		"[rmii1_rxd1]",
+		"[rmii1_rxd0]",
+		"P8_27 [hdmi]",
+		"P8_29 [hdmi]",
+		"P8_28 [hdmi]",
+		"P8_30 [hdmi]",
+		"[mmc0_dat3]",
+		"[mmc0_dat2]",
+		"[mmc0_dat1]",
+		"[mmc0_dat0]",
+		"[mmc0_clk]",
+		"[mmc0_cmd]";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"[mii col]",
+		"[mii crs]",
+		"[mii rx err]",
+		"[mii tx en]",
+		"[mii rx dv]",
+		"[i2c0 sda]",
+		"[i2c0 scl]",
+		"[jtag emu0]",
+		"[jtag emu1]",
+		"[mii tx clk]",
+		"[mii rx clk]",
+		"NC",
+		"NC",
+		"[usb vbus en]",
+		"P9_31 [spi1_sclk]",
+		"P9_29 [spi1_d0]",
+		"P9_30 [spi1_d1]",
+		"P9_28 [spi1_cs0]",
+		"P9_42B [ecappwm0]",
+		"P9_27",
+		"P9_41A",
+		"P9_25",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/am335x-boneblack-uboot.dts b/arch/arm/boot/dts/am335x-boneblack-uboot.dts
new file mode 100644
index 000000000..4226cc500
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-boneblack-uboot.dts
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-bbb-bone-buses.dtsi"
+
+/ {
+	model = "TI AM335x BeagleBone Black";
+	compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+
+	chosen {
+		base_dtb = "am335x-boneblack-uboot.dts";
+		base_dtb_timestamp = __TIMESTAMP__;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+};
+
+&cpu0_opp_table {
+	/*
+	 * All PG 2.0 silicon may not support 1GHz but some of the early
+	 * BeagleBone Blacks have PG 2.0 silicon which is guaranteed
+	 * to support 1GHz OPP so enable it for PG 2.0 on this board.
+	 */
+	oppnitro-1000000000 {
+		opp-supported-hw = <0x06 0x0100>;
+	};
+};
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&rtc {
+	system-power-controller;
+};
+
+&gpio0 {
+	gpio-line-names =
+		"[mdio_data]",
+		"[mdio_clk]",
+		"P9_22 [spi0_sclk]",
+		"P9_21 [spi0_d0]",
+		"P9_18 [spi0_d1]",
+		"P9_17 [spi0_cs0]",
+		"[mmc0_cd]",
+		"P8_42A [ecappwm0]",
+		"P8_35 [lcd d12]",
+		"P8_33 [lcd d13]",
+		"P8_31 [lcd d14]",
+		"P8_32 [lcd d15]",
+		"P9_20 [i2c2_sda]",
+		"P9_19 [i2c2_scl]",
+		"P9_26 [uart1_rxd]",
+		"P9_24 [uart1_txd]",
+		"[rmii1_txd3]",
+		"[rmii1_txd2]",
+		"[usb0_drvvbus]",
+		"[hdmi cec]",
+		"P9_41B",
+		"[rmii1_txd1]",
+		"P8_19 [ehrpwm2a]",
+		"P8_13 [ehrpwm2b]",
+		"NC",
+		"NC",
+		"P8_14",
+		"P8_17",
+		"[rmii1_txd0]",
+		"[rmii1_refclk]",
+		"P9_11 [uart4_rxd]",
+		"P9_13 [uart4_txd]";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"P8_25 [mmc1_dat0]",
+		"[mmc1_dat1]",
+		"P8_5 [mmc1_dat2]",
+		"P8_6 [mmc1_dat3]",
+		"P8_23 [mmc1_dat4]",
+		"P8_22 [mmc1_dat5]",
+		"P8_3 [mmc1_dat6]",
+		"P8_4 [mmc1_dat7]",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"P8_12",
+		"P8_11",
+		"P8_16",
+		"P8_15",
+		"P9_15A",
+		"P9_23",
+		"P9_14 [ehrpwm1a]",
+		"P9_16 [ehrpwm1b]",
+		"[emmc rst]",
+		"[usr0 led]",
+		"[usr1 led]",
+		"[usr2 led]",
+		"[usr3 led]",
+		"[hdmi irq]",
+		"[usb vbus oc]",
+		"[hdmi audio]",
+		"P9_12",
+		"P8_26",
+		"P8_21 [emmc]",
+		"P8_20 [emmc]";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"P9_15B",
+		"P8_18",
+		"P8_7",
+		"P8_8",
+		"P8_10",
+		"P8_9",
+		"P8_45 [hdmi]",
+		"P8_46 [hdmi]",
+		"P8_43 [hdmi]",
+		"P8_44 [hdmi]",
+		"P8_41 [hdmi]",
+		"P8_42 [hdmi]",
+		"P8_39 [hdmi]",
+		"P8_40 [hdmi]",
+		"P8_37 [hdmi]",
+		"P8_38 [hdmi]",
+		"P8_36 [hdmi]",
+		"P8_34 [hdmi]",
+		"[rmii1_rxd3]",
+		"[rmii1_rxd2]",
+		"[rmii1_rxd1]",
+		"[rmii1_rxd0]",
+		"P8_27 [hdmi]",
+		"P8_29 [hdmi]",
+		"P8_28 [hdmi]",
+		"P8_30 [hdmi]",
+		"[mmc0_dat3]",
+		"[mmc0_dat2]",
+		"[mmc0_dat1]",
+		"[mmc0_dat0]",
+		"[mmc0_clk]",
+		"[mmc0_cmd]";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"[mii col]",
+		"[mii crs]",
+		"[mii rx err]",
+		"[mii tx en]",
+		"[mii rx dv]",
+		"[i2c0 sda]",
+		"[i2c0 scl]",
+		"[jtag emu0]",
+		"[jtag emu1]",
+		"[mii tx clk]",
+		"[mii rx clk]",
+		"NC",
+		"NC",
+		"[usb vbus en]",
+		"P9_31 [spi1_sclk]",
+		"P9_29 [spi1_d0]",
+		"P9_30 [spi1_d1]",
+		"P9_28 [spi1_cs0]",
+		"P9_42B [ecappwm0]",
+		"P9_27",
+		"P9_41A",
+		"P9_25",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
index c72b09ab8..cd7c22c66 100644
--- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts
+++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
@@ -14,6 +14,11 @@ / {
 	model = "TI AM335x BeagleBone Black Wireless";
 	compatible = "ti,am335x-bone-black-wireless", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
 
+	chosen {
+		base_dtb = "am335x-boneblack-wireless.dts";
+		base_dtb_timestamp = __TIMESTAMP__;
+	};
+
 	wlan_en_reg: fixedregulator@2 {
 		compatible = "regulator-fixed";
 		regulator-name = "wlan-en-regulator";
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index 931219731..2788ab042 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -12,6 +12,11 @@
 / {
 	model = "TI AM335x BeagleBone Black";
 	compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+
+	chosen {
+		base_dtb = "am335x-boneblack.dts";
+		base_dtb_timestamp = __TIMESTAMP__;
+	};
 };
 
 &cpu0_opp_table {
diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
index 147c00de3..ed3342145 100644
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -14,6 +14,8 @@ / {
 
 	chosen {
 		stdout-path = &uart0;
+		base_dtb = "am335x-boneblue.dts";
+		base_dtb_timestamp = __TIMESTAMP__;
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi
index 9f7fb6374..4c87de57d 100644
--- a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi
@@ -34,6 +34,7 @@ &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart2_pins>;
 	status = "okay";
+	symlink = "bone/uart/2";
 };
 
 &rtc {
diff --git a/arch/arm/boot/dts/am335x-bonegreen-gateway.dts b/arch/arm/boot/dts/am335x-bonegreen-gateway.dts
new file mode 100644
index 000000000..5f5a352f5
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-bonegreen-gateway.dts
@@ -0,0 +1,260 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-bonegreen-common.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "SeeedStudio BeagleBone Green Gateway";
+	compatible = "ti,am335x-bone-green-gateway", "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+
+	aliases {
+		rtc0 = &extrtc;
+		rtc1 = &rtc;
+	};
+
+	chosen {
+		base_dtb = "am335x-bonegreen-gateway.dts";
+		base_dtb_timestamp = __TIMESTAMP__;
+		wl1835_bt = "S3-texas-300000";
+	};
+
+	wlan_en_reg: fixedregulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us= <70000>;
+
+		/* WL_EN */
+		gpio = <&gpio3 9 0>;
+		enable-active-high;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		//pinctrl-0 = <&user_leds_s0>;
+		pinctrl-0 = <&user_leds_s0 &bt_pins>;
+
+		compatible = "gpio-leds";
+
+		led2 {
+			label = "beaglebone:green:usr0";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "beaglebone:green:usr1";
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		led5 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led6 {
+			label = "beaglebone:green:usr4";
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "netdev";
+			default-state = "off";
+		};
+
+		wl18xx_bt_en: led7 {
+			label = "wl18xx_bt_en";
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&cpu0_opp_table {
+	/*
+	 * Octavo Systems:
+	 * The EFUSE_SMA register is not programmed for any of the AM335x wafers
+	 * we get and we are not programming them during our production test.
+	 * Therefore, from a DEVICE_ID revision point of view, the silicon looks
+	 * like it is Revision 2.1.  However, from an EFUSE_SMA point of view for
+	 * the HW OPP table, the silicon looks like it is Revision 1.0 (ie the
+	 * EFUSE_SMA register reads as all zeros).
+	 */
+	oppnitro-1000000000 {
+		opp-supported-hw = <0x06 0x0100>;
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usbhost_pins>;
+
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* WL_Active_LED / USR4 */
+		>;
+	};
+
+	bt_pins: pinmux_bt_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gmii1_txd0.gpio0_28 - BT_EN */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE6 ) /* (L15) gmii1_rxd1.mmc2_clk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLUP, MUX_MODE6 ) /* (J16) gmii1_txen.mmc2_cmd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (J17) gmii1_rxdv.mmc2_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (J18) gmii1_txd3.mmc2_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (K15) gmii1_txd2.mmc2_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (H16) gmii1_col.mmc2_dat3 */
+		>;
+	};
+
+	uart2_grove_pins: pinmux_uart2_grove_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x90c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6)
+			AM33XX_IOPAD(0x910, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6)
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gmii1_rxd3.uart3_rxd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* gmii1_rxd2.uart3_txd */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3)		/* mdio_data.uart3_ctsn */
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* mdio_clk.uart3_rtsn */
+		>;
+	};
+
+	usbhost_pins: pinmux_usbhost_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gmii1_txd1.gpio0[21] */
+		>;
+	};
+
+	wl18xx_pins: pinmux_wl18xx_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gmii1_txclk.gpio3_9 WL_EN */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_refclk.gpio0_29 WL_IRQ */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gmii1_rxclk.gpio3_10 LS_BUF_EN */
+		>;
+	};
+};
+
+&mac_sw {
+	/delete-property/pinctrl-names;
+	/delete-property/pinctrl-0;
+	/delete-property/pinctrl-1;
+	status = "disabled";
+};
+
+&mmc3 {
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
+	dma-names = "tx", "rx";
+	status = "okay";
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_grove_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	//pinctrl-0 = <&uart3_pins &bt_pins>;
+	status = "okay";
+
+	//bluetooth {
+	//	compatible = "ti,wl1835-st";
+	//	enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+	//};
+};
+
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	extrtc: rtc@68 {
+		compatible = "dallas,ds1340";
+		reg = <0x68>;
+	};
+};
+
+// (K16) gmii1_txd1.gpio0[21]
+&gpio0 {
+	usb-reset-hog {
+		gpio-hog;
+		gpios = <21 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb_reset";
+	};
+};
+
+&gpio3 {
+	ls-buf-en-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LS_BUF_EN";
+	};
+};
+
+&usb1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub@1 {
+		compatible = "usb424,9512";
+		reg = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: ethernet@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless-common-univ.dtsi b/arch/arm/boot/dts/am335x-bonegreen-wireless-common-univ.dtsi
new file mode 100644
index 000000000..725c9bcb3
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-bonegreen-wireless-common-univ.dtsi
@@ -0,0 +1,2783 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&am33xx_pinmux {
+	/************************/
+	/* P8 Header */
+	/************************/
+
+	/* P8_01                GND */
+
+	/* P8_02                GND */
+
+
+	/* P8_03 (ZCZ ball R9) emmc */
+	P8_03_default_pin: pinmux_P8_03_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0818, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad6.gpio1_6 */
+	P8_03_gpio_pin: pinmux_P8_03_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0818, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad6.gpio1_6 */
+	P8_03_gpio_pu_pin: pinmux_P8_03_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0818, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad6.gpio1_6 */
+	P8_03_gpio_pd_pin: pinmux_P8_03_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0818, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad6.gpio1_6 */
+	P8_03_gpio_input_pin: pinmux_P8_03_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0818, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad6.gpio1_6 */
+
+	/* P8_04 (ZCZ ball T9) emmc */
+	P8_04_default_pin: pinmux_P8_04_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x081c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad7.gpio1_7 */
+	P8_04_gpio_pin: pinmux_P8_04_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x081c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad7.gpio1_7 */
+	P8_04_gpio_pu_pin: pinmux_P8_04_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x081c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad7.gpio1_7 */
+	P8_04_gpio_pd_pin: pinmux_P8_04_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x081c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad7.gpio1_7 */
+	P8_04_gpio_input_pin: pinmux_P8_04_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x081c, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad7.gpio1_7 */
+
+	/* P8_05 (ZCZ ball R8) emmc */
+	P8_05_default_pin: pinmux_P8_05_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0808, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad2.gpio1_2 */
+	P8_05_gpio_pin: pinmux_P8_05_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0808, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad2.gpio1_2 */
+	P8_05_gpio_pu_pin: pinmux_P8_05_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0808, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad2.gpio1_2 */
+	P8_05_gpio_pd_pin: pinmux_P8_05_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0808, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad2.gpio1_2 */
+	P8_05_gpio_input_pin: pinmux_P8_05_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0808, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad2.gpio1_2 */
+
+	/* P8_06 (ZCZ ball T8) emmc */
+	P8_06_default_pin: pinmux_P8_06_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x080c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad3.gpio1_3 */
+	P8_06_gpio_pin: pinmux_P8_06_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x080c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad3.gpio1_3 */
+	P8_06_gpio_pu_pin: pinmux_P8_06_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x080c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad3.gpio1_3 */
+	P8_06_gpio_pd_pin: pinmux_P8_06_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x080c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad3.gpio1_3 */
+	P8_06_gpio_input_pin: pinmux_P8_06_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x080c, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad3.gpio1_3 */
+
+	/* P8_07 (ZCZ ball R7) gpio2_2 */
+	P8_07_default_pin: pinmux_P8_07_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0890, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_advn_ale.gpio2_2 */
+	P8_07_gpio_pin: pinmux_P8_07_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0890, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_advn_ale.gpio2_2 */
+	P8_07_gpio_pu_pin: pinmux_P8_07_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0890, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_advn_ale.gpio2_2 */
+	P8_07_gpio_pd_pin: pinmux_P8_07_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0890, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_advn_ale.gpio2_2 */
+	P8_07_gpio_input_pin: pinmux_P8_07_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0890, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_advn_ale.gpio2_2 */
+	P8_07_timer_pin: pinmux_P8_07_timer_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0890, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* gpmc_advn_ale.timer4 */
+
+	/* P8_08 (ZCZ ball T7) gpio2_3 */
+	P8_08_default_pin: pinmux_P8_08_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0894, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_oen_ren.gpio2_3 */
+	P8_08_gpio_pin: pinmux_P8_08_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0894, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_oen_ren.gpio2_3 */
+	P8_08_gpio_pu_pin: pinmux_P8_08_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0894, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_oen_ren.gpio2_3 */
+	P8_08_gpio_pd_pin: pinmux_P8_08_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0894, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_oen_ren.gpio2_3 */
+	P8_08_gpio_input_pin: pinmux_P8_08_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0894, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_oen_ren.gpio2_3 */
+	P8_08_timer_pin: pinmux_P8_08_timer_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0894, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* gpmc_oen_ren.timer7 */
+
+	/* P8_09 (ZCZ ball T6) gpio2_5 */
+	P8_09_default_pin: pinmux_P8_09_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x089c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_be0n_cle.gpio2_5 */
+	P8_09_gpio_pin: pinmux_P8_09_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x089c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_be0n_cle.gpio2_5 */
+	P8_09_gpio_pu_pin: pinmux_P8_09_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x089c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_be0n_cle.gpio2_5 */
+	P8_09_gpio_pd_pin: pinmux_P8_09_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x089c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_be0n_cle.gpio2_5 */
+	P8_09_gpio_input_pin: pinmux_P8_09_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x089c, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_be0n_cle.gpio2_5 */
+	P8_09_timer_pin: pinmux_P8_09_timer_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x089c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* gpmc_be0n_cle.timer5 */
+
+	/* P8_10 (ZCZ ball U6) gpio2_4 */
+	P8_10_default_pin: pinmux_P8_10_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0898, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_wen.gpio2_4 */
+	P8_10_gpio_pin: pinmux_P8_10_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0898, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_wen.gpio2_4 */
+	P8_10_gpio_pu_pin: pinmux_P8_10_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0898, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_wen.gpio2_4 */
+	P8_10_gpio_pd_pin: pinmux_P8_10_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0898, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_wen.gpio2_4 */
+	P8_10_gpio_input_pin: pinmux_P8_10_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0898, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_wen.gpio2_4 */
+	P8_10_timer_pin: pinmux_P8_10_timer_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0898, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* gpmc_wen.timer6 */
+
+	/* P8_11 (ZCZ ball R12) gpio1_13 */
+	P8_11_default_pin: pinmux_P8_11_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad13.gpio1_13 */
+	P8_11_gpio_pin: pinmux_P8_11_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0834, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad13.gpio1_13 */
+	P8_11_gpio_pu_pin: pinmux_P8_11_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad13.gpio1_13 */
+	P8_11_gpio_pd_pin: pinmux_P8_11_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad13.gpio1_13 */
+	P8_11_gpio_input_pin: pinmux_P8_11_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0834, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad13.gpio1_13 */
+	P8_11_qep_pin: pinmux_P8_11_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* gpmc_ad13.eqep2b_in */
+	P8_11_pruout_pin: pinmux_P8_11_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; };	/* gpmc_ad13.pru0_out15 */
+
+	/* P8_12 (ZCZ ball T12) gpio1_12 */
+	P8_12_default_pin: pinmux_P8_12_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad12.gpio1_12 */
+	P8_12_gpio_pin: pinmux_P8_12_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0830, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad12.gpio1_12 */
+	P8_12_gpio_pu_pin: pinmux_P8_12_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad12.gpio1_12 */
+	P8_12_gpio_pd_pin: pinmux_P8_12_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad12.gpio1_12 */
+	P8_12_gpio_input_pin: pinmux_P8_12_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0830, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad12.gpio1_12 */
+	P8_12_qep_pin: pinmux_P8_12_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* gpmc_ad12.eqep2a_in */
+	P8_12_pruout_pin: pinmux_P8_12_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; };	/* gpmc_ad12.pru0_out14 */
+
+	/* P8_13 (ZCZ ball T10) gpio0_23 */
+	P8_13_default_pin: pinmux_P8_13_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad9.gpio0_23 */
+	P8_13_gpio_pin: pinmux_P8_13_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0824, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad9.gpio0_23 */
+	P8_13_gpio_pu_pin: pinmux_P8_13_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad9.gpio0_23 */
+	P8_13_gpio_pd_pin: pinmux_P8_13_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad9.gpio0_23 */
+	P8_13_gpio_input_pin: pinmux_P8_13_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0824, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad9.gpio0_23 */
+	P8_13_pwm_pin: pinmux_P8_13_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; };	/* gpmc_ad9.ehrpwm2b */
+
+	/* P8_14 (ZCZ ball T11) wl1835: wl_en */
+
+	/* P8_15 (ZCZ ball U13) gpio1_15 */
+	P8_15_default_pin: pinmux_P8_15_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad15.gpio1_15 */
+	P8_15_gpio_pin: pinmux_P8_15_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x083c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad15.gpio1_15 */
+	P8_15_gpio_pu_pin: pinmux_P8_15_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad15.gpio1_15 */
+	P8_15_gpio_pd_pin: pinmux_P8_15_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad15.gpio1_15 */
+	P8_15_gpio_input_pin: pinmux_P8_15_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x083c, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad15.gpio1_15 */
+	P8_15_qep_pin: pinmux_P8_15_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* gpmc_ad15.eqep2_strobe */
+	P8_15_pru_ecap_pin: pinmux_P8_15_pru_ecap_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* gpmc_ad15.pr1_ecap0_ecap_capin_apwm_o */
+	P8_15_pruin_pin: pinmux_P8_15_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x083c, PIN_INPUT | MUX_MODE6) >; };			/* gpmc_ad15.pru0_in15 */
+
+	/* P8_16 (ZCZ ball V13) gpio1_14 */
+	P8_16_default_pin: pinmux_P8_16_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad14.gpio1_14 */
+	P8_16_gpio_pin: pinmux_P8_16_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0838, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad14.gpio1_14 */
+	P8_16_gpio_pu_pin: pinmux_P8_16_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad14.gpio1_14 */
+	P8_16_gpio_pd_pin: pinmux_P8_16_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad14.gpio1_14 */
+	P8_16_gpio_input_pin: pinmux_P8_16_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0838, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad14.gpio1_14 */
+	P8_16_qep_pin: pinmux_P8_16_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* gpmc_ad14.eqep2_index */
+	P8_16_pruin_pin: pinmux_P8_16_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0838, PIN_INPUT | MUX_MODE6) >; };			/* gpmc_ad14.pru0_in14 */
+
+	/* P8_17 (ZCZ ball U12) wl1835: wl_irq */
+
+	/* P8_18 (ZCZ ball V12) gpio2_1 */
+	P8_18_default_pin: pinmux_P8_18_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_clk.gpio2_1 */
+	P8_18_gpio_pin: pinmux_P8_18_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x088c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_clk.gpio2_1 */
+	P8_18_gpio_pu_pin: pinmux_P8_18_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_clk.gpio2_1 */
+	P8_18_gpio_pd_pin: pinmux_P8_18_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_clk.gpio2_1 */
+	P8_18_gpio_input_pin: pinmux_P8_18_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x088c, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_clk.gpio2_1 */
+
+	/* P8_19 (ZCZ ball U10) gpio0_22 */
+	P8_19_default_pin: pinmux_P8_19_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0820, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad8.gpio0_22 */
+	P8_19_gpio_pin: pinmux_P8_19_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0820, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad8.gpio0_22 */
+	P8_19_gpio_pu_pin: pinmux_P8_19_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0820, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad8.gpio0_22 */
+	P8_19_gpio_pd_pin: pinmux_P8_19_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0820, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad8.gpio0_22 */
+	P8_19_gpio_input_pin: pinmux_P8_19_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0820, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad8.gpio0_22 */
+	P8_19_pwm_pin: pinmux_P8_19_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0820, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; };	/* gpmc_ad8.ehrpwm2a */
+
+	/* P8_20 (ZCZ ball V9) emmc */
+	P8_20_default_pin: pinmux_P8_20_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0884, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_csn2.gpio1_31 */
+	P8_20_gpio_pin: pinmux_P8_20_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0884, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_csn2.gpio1_31 */
+	P8_20_gpio_pu_pin: pinmux_P8_20_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0884, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_csn2.gpio1_31 */
+	P8_20_gpio_pd_pin: pinmux_P8_20_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0884, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_csn2.gpio1_31 */
+	P8_20_gpio_input_pin: pinmux_P8_20_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0884, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_csn2.gpio1_31 */
+	P8_20_pruout_pin: pinmux_P8_20_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0884, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* gpmc_csn2.pru1_out13 */
+	P8_20_pruin_pin: pinmux_P8_20_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0884, PIN_INPUT | MUX_MODE6) >; };			/* gpmc_csn2.pru1_in13 */
+
+	/* P8_21 (ZCZ ball U9) emmc */
+	P8_21_default_pin: pinmux_P8_21_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0880, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_csn1.gpio1_30 */
+	P8_21_gpio_pin: pinmux_P8_21_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0880, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_csn1.gpio1_30 */
+	P8_21_gpio_pu_pin: pinmux_P8_21_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0880, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_csn1.gpio1_30 */
+	P8_21_gpio_pd_pin: pinmux_P8_21_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0880, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_csn1.gpio1_30 */
+	P8_21_gpio_input_pin: pinmux_P8_21_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0880, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_csn1.gpio1_30 */
+	P8_21_pruout_pin: pinmux_P8_21_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0880, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* gpmc_csn1.pru1_out12 */
+	P8_21_pruin_pin: pinmux_P8_21_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0880, PIN_INPUT | MUX_MODE6) >; };			/* gpmc_csn1.pru1_in12 */
+
+	/* P8_22 (ZCZ ball V8) emmc */
+	P8_22_default_pin: pinmux_P8_22_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0814, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad5.gpio1_5 */
+	P8_22_gpio_pin: pinmux_P8_22_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0814, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad5.gpio1_5 */
+	P8_22_gpio_pu_pin: pinmux_P8_22_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0814, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad5.gpio1_5 */
+	P8_22_gpio_pd_pin: pinmux_P8_22_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0814, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad5.gpio1_5 */
+	P8_22_gpio_input_pin: pinmux_P8_22_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0814, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad5.gpio1_5 */
+
+	/* P8_23 (ZCZ ball U8) emmc */
+	P8_23_default_pin: pinmux_P8_23_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0810, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad4.gpio1_4 */
+	P8_23_gpio_pin: pinmux_P8_23_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0810, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad4.gpio1_4 */
+	P8_23_gpio_pu_pin: pinmux_P8_23_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0810, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad4.gpio1_4 */
+	P8_23_gpio_pd_pin: pinmux_P8_23_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0810, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad4.gpio1_4 */
+	P8_23_gpio_input_pin: pinmux_P8_23_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0810, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad4.gpio1_4 */
+
+	/* P8_24 (ZCZ ball V7) emmc */
+	P8_24_default_pin: pinmux_P8_24_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0804, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad1.gpio1_1 */
+	P8_24_gpio_pin: pinmux_P8_24_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0804, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad1.gpio1_1 */
+	P8_24_gpio_pu_pin: pinmux_P8_24_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0804, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad1.gpio1_1 */
+	P8_24_gpio_pd_pin: pinmux_P8_24_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0804, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad1.gpio1_1 */
+	P8_24_gpio_input_pin: pinmux_P8_24_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0804, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad1.gpio1_1 */
+
+	/* P8_25 (ZCZ ball U7) emmc */
+	P8_25_default_pin: pinmux_P8_25_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0800, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad0.gpio1_0 */
+	P8_25_gpio_pin: pinmux_P8_25_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0800, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad0.gpio1_0 */
+	P8_25_gpio_pu_pin: pinmux_P8_25_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0800, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad0.gpio1_0 */
+	P8_25_gpio_pd_pin: pinmux_P8_25_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0800, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad0.gpio1_0 */
+	P8_25_gpio_input_pin: pinmux_P8_25_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0800, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad0.gpio1_0 */
+
+	/* P8_26 (ZCZ ball V6) gpio-hog wl1835 */
+
+	/* P8_27 (ZCZ ball U5) hdmi */
+	P8_27_default_pin: pinmux_P8_27_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_vsync.gpio2_22 */
+	P8_27_gpio_pin: pinmux_P8_27_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_vsync.gpio2_22 */
+	P8_27_gpio_pu_pin: pinmux_P8_27_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_vsync.gpio2_22 */
+	P8_27_gpio_pd_pin: pinmux_P8_27_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_vsync.gpio2_22 */
+	P8_27_gpio_input_pin: pinmux_P8_27_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e0, PIN_INPUT | MUX_MODE7) >; };			/* lcd_vsync.gpio2_22 */
+	P8_27_pruout_pin: pinmux_P8_27_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_vsync.pru1_out8 */
+	P8_27_pruin_pin: pinmux_P8_27_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e0, PIN_INPUT | MUX_MODE6) >; };			/* lcd_vsync.pru1_in8 */
+
+	/* P8_28 (ZCZ ball V5) hdmi */
+	P8_28_default_pin: pinmux_P8_28_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_pclk.gpio2_24 */
+	P8_28_gpio_pin: pinmux_P8_28_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_pclk.gpio2_24 */
+	P8_28_gpio_pu_pin: pinmux_P8_28_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_pclk.gpio2_24 */
+	P8_28_gpio_pd_pin: pinmux_P8_28_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_pclk.gpio2_24 */
+	P8_28_gpio_input_pin: pinmux_P8_28_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e8, PIN_INPUT | MUX_MODE7) >; };			/* lcd_pclk.gpio2_24 */
+	P8_28_pruout_pin: pinmux_P8_28_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_pclk.pru1_out10 */
+	P8_28_pruin_pin: pinmux_P8_28_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e8, PIN_INPUT | MUX_MODE6) >; };			/* lcd_pclk.pru1_in10 */
+
+	/* P8_29 (ZCZ ball R5) hdmi */
+	P8_29_default_pin: pinmux_P8_29_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_hsync.gpio2_23 */
+	P8_29_gpio_pin: pinmux_P8_29_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_hsync.gpio2_23 */
+	P8_29_gpio_pu_pin: pinmux_P8_29_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_hsync.gpio2_23 */
+	P8_29_gpio_pd_pin: pinmux_P8_29_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_hsync.gpio2_23 */
+	P8_29_gpio_input_pin: pinmux_P8_29_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e4, PIN_INPUT | MUX_MODE7) >; };			/* lcd_hsync.gpio2_23 */
+	P8_29_pruout_pin: pinmux_P8_29_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_hsync.pru1_out9 */
+	P8_29_pruin_pin: pinmux_P8_29_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e4, PIN_INPUT | MUX_MODE6) >; };			/* lcd_hsync.pru1_in9 */
+
+	/* P8_30 (ZCZ ball R6) hdmi */
+	P8_30_default_pin: pinmux_P8_30_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_ac_bias_en.gpio2_25 */
+	P8_30_gpio_pin: pinmux_P8_30_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ec, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_ac_bias_en.gpio2_25 */
+	P8_30_gpio_pu_pin: pinmux_P8_30_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_ac_bias_en.gpio2_25 */
+	P8_30_gpio_pd_pin: pinmux_P8_30_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_ac_bias_en.gpio2_25 */
+	P8_30_gpio_input_pin: pinmux_P8_30_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ec, PIN_INPUT | MUX_MODE7) >; };			/* lcd_ac_bias_en.gpio2_25 */
+	P8_30_pruout_pin: pinmux_P8_30_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_ac_bias_en.pru1_out11 */
+	P8_30_pruin_pin: pinmux_P8_30_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ec, PIN_INPUT | MUX_MODE6) >; };			/* lcd_ac_bias_en.pru1_in11 */
+
+	/* P8_31 (ZCZ ball V4) hdmi */
+	P8_31_default_pin: pinmux_P8_31_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data14.gpio0_10 */
+	P8_31_gpio_pin: pinmux_P8_31_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data14.gpio0_10 */
+	P8_31_gpio_pu_pin: pinmux_P8_31_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data14.gpio0_10 */
+	P8_31_gpio_pd_pin: pinmux_P8_31_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data14.gpio0_10 */
+	P8_31_gpio_input_pin: pinmux_P8_31_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d8, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data14.gpio0_10 */
+	P8_31_qep_pin: pinmux_P8_31_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* lcd_data14.eqep1_index */
+	P8_31_uart_pin: pinmux_P8_31_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* lcd_data14.uart5_rxd */
+
+	/* P8_32 (ZCZ ball T5) hdmi */
+	P8_32_default_pin: pinmux_P8_32_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08dc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data15.gpio0_11 */
+	P8_32_gpio_pin: pinmux_P8_32_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08dc, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data15.gpio0_11 */
+	P8_32_gpio_pu_pin: pinmux_P8_32_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08dc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data15.gpio0_11 */
+	P8_32_gpio_pd_pin: pinmux_P8_32_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08dc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data15.gpio0_11 */
+	P8_32_gpio_input_pin: pinmux_P8_32_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08dc, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data15.gpio0_11 */
+	P8_32_qep_pin: pinmux_P8_32_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08dc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* lcd_data15.eqep1_strobe */
+
+	/* P8_33 (ZCZ ball V3) hdmi */
+	P8_33_default_pin: pinmux_P8_33_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data13.gpio0_9 */
+	P8_33_gpio_pin: pinmux_P8_33_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data13.gpio0_9 */
+	P8_33_gpio_pu_pin: pinmux_P8_33_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data13.gpio0_9 */
+	P8_33_gpio_pd_pin: pinmux_P8_33_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data13.gpio0_9 */
+	P8_33_gpio_input_pin: pinmux_P8_33_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d4, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data13.gpio0_9 */
+	P8_33_qep_pin: pinmux_P8_33_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* lcd_data13.eqep1b_in */
+
+	/* P8_34 (ZCZ ball U4) hdmi */
+	P8_34_default_pin: pinmux_P8_34_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08cc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data11.gpio2_17 */
+	P8_34_gpio_pin: pinmux_P8_34_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08cc, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data11.gpio2_17 */
+	P8_34_gpio_pu_pin: pinmux_P8_34_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08cc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data11.gpio2_17 */
+	P8_34_gpio_pd_pin: pinmux_P8_34_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08cc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data11.gpio2_17 */
+	P8_34_gpio_input_pin: pinmux_P8_34_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08cc, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data11.gpio2_17 */
+	P8_34_pwm_pin: pinmux_P8_34_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08cc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE2) >; };	/* lcd_data11.ehrpwm1b */
+
+	/* P8_35 (ZCZ ball V2) hdmi */
+	P8_35_default_pin: pinmux_P8_35_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data12.gpio0_8 */
+	P8_35_gpio_pin: pinmux_P8_35_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data12.gpio0_8 */
+	P8_35_gpio_pu_pin: pinmux_P8_35_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data12.gpio0_8 */
+	P8_35_gpio_pd_pin: pinmux_P8_35_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data12.gpio0_8 */
+	P8_35_gpio_input_pin: pinmux_P8_35_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d0, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data12.gpio0_8 */
+	P8_35_qep_pin: pinmux_P8_35_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08d0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* lcd_data12.eqep1a_in */
+
+	/* P8_36 (ZCZ ball U3) hdmi */
+	P8_36_default_pin: pinmux_P8_36_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data10.gpio2_16 */
+	P8_36_gpio_pin: pinmux_P8_36_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data10.gpio2_16 */
+	P8_36_gpio_pu_pin: pinmux_P8_36_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data10.gpio2_16 */
+	P8_36_gpio_pd_pin: pinmux_P8_36_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data10.gpio2_16 */
+	P8_36_gpio_input_pin: pinmux_P8_36_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c8, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data10.gpio2_16 */
+	P8_36_pwm_pin: pinmux_P8_36_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE2) >; };	/* lcd_data10.ehrpwm1a */
+
+	/* P8_37 (ZCZ ball U1) hdmi */
+	P8_37_default_pin: pinmux_P8_37_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data8.gpio2_14 */
+	P8_37_gpio_pin: pinmux_P8_37_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data8.gpio2_14 */
+	P8_37_gpio_pu_pin: pinmux_P8_37_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data8.gpio2_14 */
+	P8_37_gpio_pd_pin: pinmux_P8_37_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data8.gpio2_14 */
+	P8_37_gpio_input_pin: pinmux_P8_37_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c0, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data8.gpio2_14 */
+	P8_37_pwm_pin: pinmux_P8_37_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE2) >; };	/* lcd_data8.ehrpwm1_tripzone_input */
+	P8_37_uart_pin: pinmux_P8_37_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* lcd_data8.uart5_txd */
+
+	/* P8_38 (ZCZ ball U2) hdmi */
+	P8_38_default_pin: pinmux_P8_38_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data9.gpio2_15 */
+	P8_38_gpio_pin: pinmux_P8_38_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data9.gpio2_15 */
+	P8_38_gpio_pu_pin: pinmux_P8_38_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data9.gpio2_15 */
+	P8_38_gpio_pd_pin: pinmux_P8_38_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data9.gpio2_15 */
+	P8_38_gpio_input_pin: pinmux_P8_38_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c4, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data9.gpio2_15 */
+	P8_38_pwm_pin: pinmux_P8_38_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE2) >; };	/* lcd_data9.ehrpwm0_synco */
+	P8_38_uart_pin: pinmux_P8_38_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08c4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* lcd_data9.uart5_rxd */
+
+	/* P8_39 (ZCZ ball T3) hdmi */
+	P8_39_default_pin: pinmux_P8_39_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data6.gpio2_12 */
+	P8_39_gpio_pin: pinmux_P8_39_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data6.gpio2_12 */
+	P8_39_gpio_pu_pin: pinmux_P8_39_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data6.gpio2_12 */
+	P8_39_gpio_pd_pin: pinmux_P8_39_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data6.gpio2_12 */
+	P8_39_gpio_input_pin: pinmux_P8_39_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b8, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data6.gpio2_12 */
+	P8_39_qep_pin: pinmux_P8_39_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* lcd_data6.eqep2_index */
+	P8_39_pruout_pin: pinmux_P8_39_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_data6.pru1_out6 */
+	P8_39_pruin_pin: pinmux_P8_39_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b8, PIN_INPUT | MUX_MODE6) >; };			/* lcd_data6.pru1_in6 */
+
+	/* P8_40 (ZCZ ball T4) hdmi */
+	P8_40_default_pin: pinmux_P8_40_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data7.gpio2_13 */
+	P8_40_gpio_pin: pinmux_P8_40_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08bc, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data7.gpio2_13 */
+	P8_40_gpio_pu_pin: pinmux_P8_40_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data7.gpio2_13 */
+	P8_40_gpio_pd_pin: pinmux_P8_40_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data7.gpio2_13 */
+	P8_40_gpio_input_pin: pinmux_P8_40_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08bc, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data7.gpio2_13 */
+	P8_40_qep_pin: pinmux_P8_40_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* lcd_data7.eqep2_strobe */
+	P8_40_pruout_pin: pinmux_P8_40_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08bc, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_data7.pru1_out7 */
+	P8_40_pruin_pin: pinmux_P8_40_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08bc, PIN_INPUT | MUX_MODE6) >; };			/* lcd_data7.pru1_in7 */
+
+	/* P8_41 (ZCZ ball T1) hdmi */
+	P8_41_default_pin: pinmux_P8_41_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data4.gpio2_10 */
+	P8_41_gpio_pin: pinmux_P8_41_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data4.gpio2_10 */
+	P8_41_gpio_pu_pin: pinmux_P8_41_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data4.gpio2_10 */
+	P8_41_gpio_pd_pin: pinmux_P8_41_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data4.gpio2_10 */
+	P8_41_gpio_input_pin: pinmux_P8_41_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b0, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data4.gpio2_10 */
+	P8_41_qep_pin: pinmux_P8_41_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* lcd_data4.eqep2a_in */
+	P8_41_pruout_pin: pinmux_P8_41_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_data4.pru1_out4 */
+	P8_41_pruin_pin: pinmux_P8_41_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b0, PIN_INPUT | MUX_MODE6) >; };			/* lcd_data4.pru1_in4 */
+
+	/* P8_42 (ZCZ ball T2) hdmi */
+	P8_42_default_pin: pinmux_P8_42_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data5.gpio2_11 */
+	P8_42_gpio_pin: pinmux_P8_42_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data5.gpio2_11 */
+	P8_42_gpio_pu_pin: pinmux_P8_42_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data5.gpio2_11 */
+	P8_42_gpio_pd_pin: pinmux_P8_42_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data5.gpio2_11 */
+	P8_42_gpio_input_pin: pinmux_P8_42_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b4, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data5.gpio2_11 */
+	P8_42_qep_pin: pinmux_P8_42_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* lcd_data5.eqep2b_in */
+	P8_42_pruout_pin: pinmux_P8_42_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_data5.pru1_out5 */
+	P8_42_pruin_pin: pinmux_P8_42_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08b4, PIN_INPUT | MUX_MODE6) >; };			/* lcd_data5.pru1_in5 */
+
+	/* P8_43 (ZCZ ball R3) hdmi */
+	P8_43_default_pin: pinmux_P8_43_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data2.gpio2_8 */
+	P8_43_gpio_pin: pinmux_P8_43_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data2.gpio2_8 */
+	P8_43_gpio_pu_pin: pinmux_P8_43_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data2.gpio2_8 */
+	P8_43_gpio_pd_pin: pinmux_P8_43_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data2.gpio2_8 */
+	P8_43_gpio_input_pin: pinmux_P8_43_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a8, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data2.gpio2_8 */
+	P8_43_pwm_pin: pinmux_P8_43_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; };	/* lcd_data2.ehrpwm2_tripzone_input */
+	P8_43_pruout_pin: pinmux_P8_43_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_data2.pru1_out2 */
+	P8_43_pruin_pin: pinmux_P8_43_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a8, PIN_INPUT | MUX_MODE6) >; };			/* lcd_data2.pru1_in2 */
+
+	/* P8_44 (ZCZ ball R4) hdmi */
+	P8_44_default_pin: pinmux_P8_44_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data3.gpio2_9 */
+	P8_44_gpio_pin: pinmux_P8_44_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ac, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data3.gpio2_9 */
+	P8_44_gpio_pu_pin: pinmux_P8_44_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data3.gpio2_9 */
+	P8_44_gpio_pd_pin: pinmux_P8_44_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data3.gpio2_9 */
+	P8_44_gpio_input_pin: pinmux_P8_44_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ac, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data3.gpio2_9 */
+	P8_44_pwm_pin: pinmux_P8_44_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; };	/* lcd_data3.ehrpwm0_synco */
+	P8_44_pruout_pin: pinmux_P8_44_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_data3.pru1_out3 */
+	P8_44_pruin_pin: pinmux_P8_44_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ac, PIN_INPUT | MUX_MODE6) >; };			/* lcd_data3.pru1_in3 */
+
+	/* P8_45 (ZCZ ball R1) hdmi */
+	P8_45_default_pin: pinmux_P8_45_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data0.gpio2_6 */
+	P8_45_gpio_pin: pinmux_P8_45_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data0.gpio2_6 */
+	P8_45_gpio_pu_pin: pinmux_P8_45_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data0.gpio2_6 */
+	P8_45_gpio_pd_pin: pinmux_P8_45_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data0.gpio2_6 */
+	P8_45_gpio_input_pin: pinmux_P8_45_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a0, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data0.gpio2_6 */
+	P8_45_pwm_pin: pinmux_P8_45_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; };	/* lcd_data0.ehrpwm2a */
+	P8_45_pruout_pin: pinmux_P8_45_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_data0.pru1_out0 */
+	P8_45_pruin_pin: pinmux_P8_45_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a0, PIN_INPUT | MUX_MODE6) >; };			/* lcd_data0.pru1_in0 */
+
+	/* P8_46 (ZCZ ball R2) hdmi */
+	P8_46_default_pin: pinmux_P8_46_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data1.gpio2_7 */
+	P8_46_gpio_pin: pinmux_P8_46_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_data1.gpio2_7 */
+	P8_46_gpio_pu_pin: pinmux_P8_46_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_data1.gpio2_7 */
+	P8_46_gpio_pd_pin: pinmux_P8_46_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_data1.gpio2_7 */
+	P8_46_gpio_input_pin: pinmux_P8_46_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a4, PIN_INPUT | MUX_MODE7) >; };			/* lcd_data1.gpio2_7 */
+	P8_46_pwm_pin: pinmux_P8_46_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; };	/* lcd_data1.ehrpwm2b */
+	P8_46_pruout_pin: pinmux_P8_46_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_data1.pru1_out1 */
+	P8_46_pruin_pin: pinmux_P8_46_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08a4, PIN_INPUT | MUX_MODE6) >; };			/* lcd_data1.pru1_in1 */
+
+	/************************/
+	/* P9 Header */
+	/************************/
+
+	/* P9_01                GND */
+
+	/* P9_02                GND */
+
+	/* P9_03                3V3 */
+
+	/* P9_04                3V3 */
+
+	/* P9_05                VDD_5V */
+
+	/* P9_06                VDD_5V */
+
+	/* P9_07                SYS_5V */
+
+	/* P9_08                SYS_5V */
+
+	/* P9_09                PWR_BUT */
+
+	/* P9_10                RSTn */
+
+	/* P9_11 (ZCZ ball T17) gpio0_30 */
+	P9_11_default_pin: pinmux_P9_11_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_wait0.gpio0_30 */
+	P9_11_gpio_pin: pinmux_P9_11_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0870, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_wait0.gpio0_30 */
+	P9_11_gpio_pu_pin: pinmux_P9_11_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_wait0.gpio0_30 */
+	P9_11_gpio_pd_pin: pinmux_P9_11_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_wait0.gpio0_30 */
+	P9_11_gpio_input_pin: pinmux_P9_11_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0870, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_wait0.gpio0_30 */
+	P9_11_uart_pin: pinmux_P9_11_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; };	/* gpmc_wait0.uart4_rxd */
+
+	/* P9_12 (ZCZ ball U18) gpio1_28 */
+	P9_12_default_pin: pinmux_P9_12_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_be1n.gpio1_28 */
+	P9_12_gpio_pin: pinmux_P9_12_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0878, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_be1n.gpio1_28 */
+	P9_12_gpio_pu_pin: pinmux_P9_12_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_be1n.gpio1_28 */
+	P9_12_gpio_pd_pin: pinmux_P9_12_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_be1n.gpio1_28 */
+	P9_12_gpio_input_pin: pinmux_P9_12_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0878, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_be1n.gpio1_28 */
+
+	/* P9_13 (ZCZ ball U17) gpio0_31 */
+	P9_13_default_pin: pinmux_P9_13_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_wpn.gpio0_31 */
+	P9_13_gpio_pin: pinmux_P9_13_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0874, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_wpn.gpio0_31 */
+	P9_13_gpio_pu_pin: pinmux_P9_13_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_wpn.gpio0_31 */
+	P9_13_gpio_pd_pin: pinmux_P9_13_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_wpn.gpio0_31 */
+	P9_13_gpio_input_pin: pinmux_P9_13_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0874, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_wpn.gpio0_31 */
+	P9_13_uart_pin: pinmux_P9_13_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; };	/* gpmc_wpn.uart4_txd */
+
+	/* P9_14 (ZCZ ball U14) gpio1_18 */
+	P9_14_default_pin: pinmux_P9_14_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a2.gpio1_18 */
+	P9_14_gpio_pin: pinmux_P9_14_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0848, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_a2.gpio1_18 */
+	P9_14_gpio_pu_pin: pinmux_P9_14_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a2.gpio1_18 */
+	P9_14_gpio_pd_pin: pinmux_P9_14_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a2.gpio1_18 */
+	P9_14_gpio_input_pin: pinmux_P9_14_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0848, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_a2.gpio1_18 */
+	P9_14_pwm_pin: pinmux_P9_14_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; };	/* gpmc_a2.ehrpwm1a */
+
+	/* P9_15 (ZCZ ball R13) gpio1_16 */
+	P9_15_default_pin: pinmux_P9_15_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0840, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a0.gpio1_16 */
+	P9_15_gpio_pin: pinmux_P9_15_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0840, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_a0.gpio1_16 */
+	P9_15_gpio_pu_pin: pinmux_P9_15_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0840, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a0.gpio1_16 */
+	P9_15_gpio_pd_pin: pinmux_P9_15_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0840, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a0.gpio1_16 */
+	P9_15_gpio_input_pin: pinmux_P9_15_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0840, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_a0.gpio1_16 */
+	P9_15_pwm_pin: pinmux_P9_15_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0840, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; };	/* gpmc_a0.ehrpwm1_tripzone_input */
+
+	/* P9_16 (ZCZ ball T14) gpio1_19 */
+	P9_16_default_pin: pinmux_P9_16_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x084c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a3.gpio1_19 */
+	P9_16_gpio_pin: pinmux_P9_16_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x084c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_a3.gpio1_19 */
+	P9_16_gpio_pu_pin: pinmux_P9_16_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x084c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a3.gpio1_19 */
+	P9_16_gpio_pd_pin: pinmux_P9_16_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x084c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a3.gpio1_19 */
+	P9_16_gpio_input_pin: pinmux_P9_16_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x084c, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_a3.gpio1_19 */
+	P9_16_pwm_pin: pinmux_P9_16_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x084c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; };	/* gpmc_a3.ehrpwm1b */
+
+	/* P9_17 (ZCZ ball A16) gpio0_5 */
+	P9_17_default_pin: pinmux_P9_17_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* spi0_cs0.gpio0_5 */
+	P9_17_gpio_pin: pinmux_P9_17_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* spi0_cs0.gpio0_5 */
+	P9_17_gpio_pu_pin: pinmux_P9_17_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* spi0_cs0.gpio0_5 */
+	P9_17_gpio_pd_pin: pinmux_P9_17_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* spi0_cs0.gpio0_5 */
+	P9_17_gpio_input_pin: pinmux_P9_17_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_INPUT | MUX_MODE7) >; };			/* spi0_cs0.gpio0_5 */
+	P9_17_spi_cs_pin: pinmux_P9_17_spi_cs_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* spi0_cs0.spi0_cs0 */
+	P9_17_i2c_pin: pinmux_P9_17_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* spi0_cs0.i2c1_scl */
+	P9_17_pwm_pin: pinmux_P9_17_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; };	/* spi0_cs0.ehrpwm0_synci */
+	P9_17_pru_uart_pin: pinmux_P9_17_pru_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* spi0_cs0.pr1_uart0_txd */
+
+	/* P9_18 (ZCZ ball B16) gpio0_4 */
+	P9_18_default_pin: pinmux_P9_18_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* spi0_d1.gpio0_4 */
+	P9_18_gpio_pin: pinmux_P9_18_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* spi0_d1.gpio0_4 */
+	P9_18_gpio_pu_pin: pinmux_P9_18_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* spi0_d1.gpio0_4 */
+	P9_18_gpio_pd_pin: pinmux_P9_18_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* spi0_d1.gpio0_4 */
+	P9_18_gpio_input_pin: pinmux_P9_18_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_INPUT | MUX_MODE7) >; };			/* spi0_d1.gpio0_4 */
+	P9_18_spi_pin: pinmux_P9_18_spi_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* spi0_d1.spi0_d1 */
+	P9_18_i2c_pin: pinmux_P9_18_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* spi0_d1.i2c1_sda */
+	P9_18_pwm_pin: pinmux_P9_18_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; };	/* spi0_d1.ehrpwm0_tripzone_input */
+	P9_18_pru_uart_pin: pinmux_P9_18_pru_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* spi0_d1.pr1_uart0_rxd */
+
+	/* P9_19 (ZCZ ball D17) i2c2_scl */
+	P9_19_default_pin: pinmux_P9_19_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* uart1_rtsn.i2c2_scl */
+	P9_19_gpio_pin: pinmux_P9_19_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* uart1_rtsn.gpio0_13 */
+	P9_19_gpio_pu_pin: pinmux_P9_19_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* uart1_rtsn.gpio0_13 */
+	P9_19_gpio_pd_pin: pinmux_P9_19_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* uart1_rtsn.gpio0_13 */
+	P9_19_gpio_input_pin: pinmux_P9_19_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_INPUT | MUX_MODE7) >; };			/* uart1_rtsn.gpio0_13 */
+	P9_19_timer_pin: pinmux_P9_19_timer_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* uart1_rtsn.timer5 */
+	P9_19_can_pin: pinmux_P9_19_can_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_INPUT_PULLUP | MUX_MODE2) >; };		/* uart1_rtsn.dcan0_rx */
+	P9_19_i2c_pin: pinmux_P9_19_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* uart1_rtsn.i2c2_scl */
+	P9_19_spi_cs_pin: pinmux_P9_19_spi_cs_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* uart1_rtsn.spi1_cs1 */
+	P9_19_pru_uart_pin: pinmux_P9_19_pru_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; };	/* uart1_rtsn.pr1_uart0_rts_n */
+
+	/* P9_20 (ZCZ ball D18) i2c2_sda */
+	P9_20_default_pin: pinmux_P9_20_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* uart1_ctsn.i2c2_sda */
+	P9_20_gpio_pin: pinmux_P9_20_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* uart1_ctsn.gpio0_12 */
+	P9_20_gpio_pu_pin: pinmux_P9_20_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* uart1_ctsn.gpio0_12 */
+	P9_20_gpio_pd_pin: pinmux_P9_20_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* uart1_ctsn.gpio0_12 */
+	P9_20_gpio_input_pin: pinmux_P9_20_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_INPUT | MUX_MODE7) >; };			/* uart1_ctsn.gpio0_12 */
+	P9_20_timer_pin: pinmux_P9_20_timer_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* uart1_ctsn.timer6 */
+	P9_20_can_pin: pinmux_P9_20_can_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | MUX_MODE2) >; };		/* uart1_ctsn.dcan0_tx */
+	P9_20_i2c_pin: pinmux_P9_20_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* uart1_ctsn.i2c2_sda */
+	P9_20_spi_cs_pin: pinmux_P9_20_spi_cs_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* uart1_ctsn.spi1_cs0 */
+	P9_20_pru_uart_pin: pinmux_P9_20_pru_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; };	/* uart1_ctsn.pr1_uart0_cts_n */
+
+	/* P9_21 (ZCZ ball B17) gpio0_3 */
+	P9_21_default_pin: pinmux_P9_21_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* spi0_d0.gpio0_3 */
+	P9_21_gpio_pin: pinmux_P9_21_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* spi0_d0.gpio0_3 */
+	P9_21_gpio_pu_pin: pinmux_P9_21_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* spi0_d0.gpio0_3 */
+	P9_21_gpio_pd_pin: pinmux_P9_21_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* spi0_d0.gpio0_3 */
+	P9_21_gpio_input_pin: pinmux_P9_21_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_INPUT | MUX_MODE7) >; };			/* spi0_d0.gpio0_3 */
+	P9_21_spi_pin: pinmux_P9_21_spi_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* spi0_d0.spi0_d0 */
+	P9_21_uart_pin: pinmux_P9_21_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* spi0_d0.uart2_txd */
+	P9_21_i2c_pin: pinmux_P9_21_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* spi0_d0.i2c2_scl */
+	P9_21_pwm_pin: pinmux_P9_21_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; };	/* spi0_d0.ehrpwm0b */
+	P9_21_pru_uart_pin: pinmux_P9_21_pru_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* spi0_d0.pr1_uart0_rts_n */
+
+	/* P9_22 (ZCZ ball A17) gpio0_2 */
+	P9_22_default_pin: pinmux_P9_22_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* spi0_sclk.gpio0_2 */
+	P9_22_gpio_pin: pinmux_P9_22_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* spi0_sclk.gpio0_2 */
+	P9_22_gpio_pu_pin: pinmux_P9_22_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* spi0_sclk.gpio0_2 */
+	P9_22_gpio_pd_pin: pinmux_P9_22_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* spi0_sclk.gpio0_2 */
+	P9_22_gpio_input_pin: pinmux_P9_22_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_INPUT | MUX_MODE7) >; };			/* spi0_sclk.gpio0_2 */
+	P9_22_spi_sclk_pin: pinmux_P9_22_spi_sclk_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* spi0_sclk.spi0_sclk */
+	P9_22_uart_pin: pinmux_P9_22_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* spi0_sclk.uart2_rxd */
+	P9_22_i2c_pin: pinmux_P9_22_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* spi0_sclk.i2c2_sda */
+	P9_22_pwm_pin: pinmux_P9_22_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; };	/* spi0_sclk.ehrpwm0a */
+	P9_22_pru_uart_pin: pinmux_P9_22_pru_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* spi0_sclk.pr1_uart0_cts_n */
+
+	/* P9_23 (ZCZ ball V14) gpio1_17 */
+	P9_23_default_pin: pinmux_P9_23_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0844, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a1.gpio1_17 */
+	P9_23_gpio_pin: pinmux_P9_23_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0844, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_a1.gpio1_17 */
+	P9_23_gpio_pu_pin: pinmux_P9_23_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0844, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a1.gpio1_17 */
+	P9_23_gpio_pd_pin: pinmux_P9_23_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0844, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a1.gpio1_17 */
+	P9_23_gpio_input_pin: pinmux_P9_23_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0844, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_a1.gpio1_17 */
+	P9_23_pwm_pin: pinmux_P9_23_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0844, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; };	/* gpmc_a1.ehrpwm0_synco */
+
+	/* P9_24 (ZCZ ball D15) gpio0_15 */
+	P9_24_default_pin: pinmux_P9_24_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* uart1_txd.gpio0_15 */
+	P9_24_gpio_pin: pinmux_P9_24_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* uart1_txd.gpio0_15 */
+	P9_24_gpio_pu_pin: pinmux_P9_24_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* uart1_txd.gpio0_15 */
+	P9_24_gpio_pd_pin: pinmux_P9_24_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* uart1_txd.gpio0_15 */
+	P9_24_gpio_input_pin: pinmux_P9_24_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_INPUT | MUX_MODE7) >; };			/* uart1_txd.gpio0_15 */
+	P9_24_uart_pin: pinmux_P9_24_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* uart1_txd.uart1_txd */
+	P9_24_can_pin: pinmux_P9_24_can_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_INPUT_PULLUP | MUX_MODE2) >; };		/* uart1_txd.dcan1_rx */
+	P9_24_i2c_pin: pinmux_P9_24_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* uart1_txd.i2c1_scl */
+	P9_24_pru_uart_pin: pinmux_P9_24_pru_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; };	/* uart1_txd.pr1_uart0_txd */
+	P9_24_pruin_pin: pinmux_P9_24_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_INPUT | MUX_MODE6) >; };			/* uart1_txd.pru0_in16 */
+
+	/* P9_25 (ZCZ ball A14) audio */
+	P9_25_default_pin: pinmux_P9_25_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_ahclkx.gpio3_21 */
+	P9_25_gpio_pin: pinmux_P9_25_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09ac, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* mcasp0_ahclkx.gpio3_21 */
+	P9_25_gpio_pu_pin: pinmux_P9_25_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_ahclkx.gpio3_21 */
+	P9_25_gpio_pd_pin: pinmux_P9_25_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_ahclkx.gpio3_21 */
+	P9_25_gpio_input_pin: pinmux_P9_25_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09ac, PIN_INPUT | MUX_MODE7) >; };			/* mcasp0_ahclkx.gpio3_21 */
+	P9_25_qep_pin: pinmux_P9_25_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* mcasp0_ahclkx.eqep0_strobe */
+	P9_25_pruout_pin: pinmux_P9_25_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* mcasp0_ahclkx.pru0_out7 */
+	P9_25_pruin_pin: pinmux_P9_25_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09ac, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_ahclkx.pru0_in7 */
+
+	/* P9_26 (ZCZ ball D16) gpio0_14 */
+	P9_26_default_pin: pinmux_P9_26_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* uart1_rxd.gpio0_14 */
+	P9_26_gpio_pin: pinmux_P9_26_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* uart1_rxd.gpio0_14 */
+	P9_26_gpio_pu_pin: pinmux_P9_26_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* uart1_rxd.gpio0_14 */
+	P9_26_gpio_pd_pin: pinmux_P9_26_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* uart1_rxd.gpio0_14 */
+	P9_26_gpio_input_pin: pinmux_P9_26_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_INPUT | MUX_MODE7) >; };			/* uart1_rxd.gpio0_14 */
+	P9_26_uart_pin: pinmux_P9_26_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* uart1_rxd.uart1_rxd */
+	P9_26_can_pin: pinmux_P9_26_can_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | MUX_MODE2) >; };		/* uart1_rxd.dcan1_tx */
+	P9_26_i2c_pin: pinmux_P9_26_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* uart1_rxd.i2c1_sda */
+	P9_26_pru_uart_pin: pinmux_P9_26_pru_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; };	/* uart1_rxd.pr1_uart0_rxd */
+	P9_26_pruin_pin: pinmux_P9_26_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_INPUT | MUX_MODE6) >; };			/* uart1_rxd.pru1_in16 */
+
+	/* P9_27 (ZCZ ball C13) gpio3_19 */
+	P9_27_default_pin: pinmux_P9_27_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_fsr.gpio3_19 */
+	P9_27_gpio_pin: pinmux_P9_27_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* mcasp0_fsr.gpio3_19 */
+	P9_27_gpio_pu_pin: pinmux_P9_27_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_fsr.gpio3_19 */
+	P9_27_gpio_pd_pin: pinmux_P9_27_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_fsr.gpio3_19 */
+	P9_27_gpio_input_pin: pinmux_P9_27_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a4, PIN_INPUT | MUX_MODE7) >; };			/* mcasp0_fsr.gpio3_19 */
+	P9_27_qep_pin: pinmux_P9_27_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* mcasp0_fsr.eqep0b_in */
+	P9_27_pruout_pin: pinmux_P9_27_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* mcasp0_fsr.pru0_out5 */
+	P9_27_pruin_pin: pinmux_P9_27_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a4, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_fsr.pru0_in5 */
+
+	/* P9_28 (ZCZ ball C12) audio */
+	P9_28_default_pin: pinmux_P9_28_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_ahclkr.gpio3_17 */
+	P9_28_gpio_pin: pinmux_P9_28_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* mcasp0_ahclkr.gpio3_17 */
+	P9_28_gpio_pu_pin: pinmux_P9_28_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_ahclkr.gpio3_17 */
+	P9_28_gpio_pd_pin: pinmux_P9_28_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_ahclkr.gpio3_17 */
+	P9_28_gpio_input_pin: pinmux_P9_28_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_INPUT | MUX_MODE7) >; };			/* mcasp0_ahclkr.gpio3_17 */
+	P9_28_pwm_pin: pinmux_P9_28_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; };	/* mcasp0_ahclkr.ehrpwm0_synci */
+	P9_28_spi_cs_pin: pinmux_P9_28_spi_cs_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* mcasp0_ahclkr.spi1_cs0 */
+	P9_28_pwm2_pin: pinmux_P9_28_pwm2_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; };	/* mcasp0_ahclkr.ecap2_in_pwm2_out */
+	P9_28_pruout_pin: pinmux_P9_28_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* mcasp0_ahclkr.pru0_out3 */
+	P9_28_pruin_pin: pinmux_P9_28_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_ahclkr.pru0_in3 */
+
+	/* P9_29 (ZCZ ball B13) audio */
+	P9_29_default_pin: pinmux_P9_29_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_fsx.gpio3_15 */
+	P9_29_gpio_pin: pinmux_P9_29_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* mcasp0_fsx.gpio3_15 */
+	P9_29_gpio_pu_pin: pinmux_P9_29_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_fsx.gpio3_15 */
+	P9_29_gpio_pd_pin: pinmux_P9_29_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_fsx.gpio3_15 */
+	P9_29_gpio_input_pin: pinmux_P9_29_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_INPUT | MUX_MODE7) >; };			/* mcasp0_fsx.gpio3_15 */
+	P9_29_pwm_pin: pinmux_P9_29_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; };	/* mcasp0_fsx.ehrpwm0b */
+	P9_29_spi_pin: pinmux_P9_29_spi_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* mcasp0_fsx.spi1_d0 */
+	P9_29_pruout_pin: pinmux_P9_29_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* mcasp0_fsx.pru0_out1 */
+	P9_29_pruin_pin: pinmux_P9_29_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_fsx.pru0_in1 */
+
+	/* P9_30 (ZCZ ball D12) gpio-hog wl1835 */
+
+	/* P9_31 (ZCZ ball A13) audio */
+	P9_31_default_pin: pinmux_P9_31_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_aclkx.gpio3_14 */
+	P9_31_gpio_pin: pinmux_P9_31_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* mcasp0_aclkx.gpio3_14 */
+	P9_31_gpio_pu_pin: pinmux_P9_31_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_aclkx.gpio3_14 */
+	P9_31_gpio_pd_pin: pinmux_P9_31_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_aclkx.gpio3_14 */
+	P9_31_gpio_input_pin: pinmux_P9_31_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_INPUT | MUX_MODE7) >; };			/* mcasp0_aclkx.gpio3_14 */
+	P9_31_pwm_pin: pinmux_P9_31_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; };	/* mcasp0_aclkx.ehrpwm0a */
+	P9_31_spi_sclk_pin: pinmux_P9_31_spi_sclk_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* mcasp0_aclkx.spi1_sclk */
+	P9_31_pruout_pin: pinmux_P9_31_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* mcasp0_aclkx.pru0_out0 */
+	P9_31_pruin_pin: pinmux_P9_31_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_aclkx.pru0_in0 */
+
+	/* P9_32                VADC */
+
+	/* P9_33 (ZCZ ball C8)  AIN4         */
+
+	/* P9_34                AGND */
+
+	/* P9_35 (ZCZ ball A8)  AIN6         */
+
+	/* P9_36 (ZCZ ball B8)  AIN5         */
+
+	/* P9_37 (ZCZ ball B7)  AIN2         */
+
+	/* P9_38 (ZCZ ball A7)  AIN3         */
+
+	/* P9_39 (ZCZ ball B6)  AIN0         */
+
+	/* P9_40 (ZCZ ball C7)  AIN1         */
+
+	/* P9_41 (ZCZ ball D14) gpio0_20 */
+	P9_41_default_pin: pinmux_P9_41_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* xdma_event_intr1.gpio0_20 */
+	P9_41_gpio_pin: pinmux_P9_41_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* xdma_event_intr1.gpio0_20 */
+	P9_41_gpio_pu_pin: pinmux_P9_41_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* xdma_event_intr1.gpio0_20 */
+	P9_41_gpio_pd_pin: pinmux_P9_41_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* xdma_event_intr1.gpio0_20 */
+	P9_41_gpio_input_pin: pinmux_P9_41_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b4, PIN_INPUT | MUX_MODE7) >; };			/* xdma_event_intr1.gpio0_20 */
+	P9_41_timer_pin: pinmux_P9_41_timer_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* xdma_event_intr1.timer7 */
+	P9_41_pruin_pin: pinmux_P9_41_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b4, PIN_INPUT | MUX_MODE5) >; };			/* xdma_event_intr1.pru0_in16 */
+
+	/* P9_41.1 */
+	/* P9_91 (ZCZ ball D13) gpio3_20 */
+	P9_91_default_pin: pinmux_P9_91_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_axr1.gpio3_20 */
+	P9_91_gpio_pin: pinmux_P9_91_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* mcasp0_axr1.gpio3_20 */
+	P9_91_gpio_pu_pin: pinmux_P9_91_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_axr1.gpio3_20 */
+	P9_91_gpio_pd_pin: pinmux_P9_91_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_axr1.gpio3_20 */
+	P9_91_gpio_input_pin: pinmux_P9_91_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a8, PIN_INPUT | MUX_MODE7) >; };			/* mcasp0_axr1.gpio3_20 */
+	P9_91_qep_pin: pinmux_P9_91_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* mcasp0_axr1.eqep0_index */
+	P9_91_pruout_pin: pinmux_P9_91_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* mcasp0_axr1.pru0_out6 */
+	P9_91_pruin_pin: pinmux_P9_91_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a8, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_axr1.pru0_in6 */
+
+	/* P9_42 (ZCZ ball C18) gpio0_7 */
+	P9_42_default_pin: pinmux_P9_42_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* eCAP0_in_PWM0_out.gpio0_7 */
+	P9_42_gpio_pin: pinmux_P9_42_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* eCAP0_in_PWM0_out.gpio0_7 */
+	P9_42_gpio_pu_pin: pinmux_P9_42_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* eCAP0_in_PWM0_out.gpio0_7 */
+	P9_42_gpio_pd_pin: pinmux_P9_42_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* eCAP0_in_PWM0_out.gpio0_7 */
+	P9_42_gpio_input_pin: pinmux_P9_42_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_INPUT | MUX_MODE7) >; };			/* eCAP0_in_PWM0_out.gpio0_7 */
+	P9_42_pwm_pin: pinmux_P9_42_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE0) >; };	/* eCAP0_in_PWM0_out.ecap0_in_pwm0_out */
+	P9_42_uart_pin: pinmux_P9_42_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* eCAP0_in_PWM0_out.uart3_txd */
+	P9_42_spi_cs_pin: pinmux_P9_42_spi_cs_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* eCAP0_in_PWM0_out.spi1_cs1 */
+	P9_42_pru_ecap_pin: pinmux_P9_42_pru_ecap_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; };	/* eCAP0_in_PWM0_out.pr1_ecap0_ecap_capin_apwm_o */
+	P9_42_spi_sclk_pin: pinmux_P9_42_spi_sclk_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* eCAP0_in_PWM0_out.spi1_sclk */
+
+	/* P9_42.1 */
+	/* P9_92 (ZCZ ball B12) gpio3_18 */
+	P9_92_default_pin: pinmux_P9_92_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_aclkr.gpio3_18 */
+	P9_92_gpio_pin: pinmux_P9_92_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* mcasp0_aclkr.gpio3_18 */
+	P9_92_gpio_pu_pin: pinmux_P9_92_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_aclkr.gpio3_18 */
+	P9_92_gpio_pd_pin: pinmux_P9_92_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_aclkr.gpio3_18 */
+	P9_92_gpio_input_pin: pinmux_P9_92_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a0, PIN_INPUT | MUX_MODE7) >; };			/* mcasp0_aclkr.gpio3_18 */
+	P9_92_qep_pin: pinmux_P9_92_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* mcasp0_aclkr.eqep0a_in */
+	P9_92_pruout_pin: pinmux_P9_92_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* mcasp0_aclkr.pru0_out4 */
+	P9_92_pruin_pin: pinmux_P9_92_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a0, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_aclkr.pru0_in4 */
+
+	/* P9_43                GND */
+
+	/* P9_44                GND */
+
+	/* P9_45                GND */
+
+	/* P9_46                GND */
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+
+	clock-frequency = <100000>;
+	symlink = "bone/i2c/1";
+};
+
+&i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+
+	clock-frequency = <100000>;
+	symlink = "bone/i2c/2";
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+	symlink = "bone/uart/1";
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+	symlink = "bone/uart/2";
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+	symlink = "bone/uart/3";
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+	symlink = "bone/uart/4";
+};
+
+&uart5 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+	symlink = "bone/uart/5";
+};
+
+&dcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+	symlink = "bone/can/0";
+};
+
+&dcan1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+	symlink = "bone/can/1";
+};
+
+&eqep0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+	symlink = "bone/eqep/0";
+};
+
+&eqep1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+	symlink = "bone/eqep/1";
+};
+
+&eqep2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+	symlink = "bone/eqep/2";
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&epwmss1 {
+	status = "okay";
+};
+
+&epwmss2 {
+	status = "okay";
+};
+
+&ehrpwm0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&ehrpwm1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&ehrpwm2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&ecap0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&ecap1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&ecap2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+
+	channel@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "spidev";
+		symlink = "bone/spi/0.0";
+
+		reg = <0>;
+		spi-max-frequency = <16000000>;
+		spi-cpha;
+	};
+
+	channel@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "spidev";
+		symlink = "bone/spi/0.1";
+
+		reg = <1>;
+		spi-max-frequency = <16000000>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+
+	channel@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "spidev";
+		symlink = "bone/spi/1.0";
+
+		reg = <0>;
+		spi-max-frequency = <16000000>;
+		spi-cpha;
+	};
+
+	channel@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "spidev";
+		symlink = "bone/spi/1.1";
+
+		reg = <1>;
+		spi-max-frequency = <16000000>;
+	};
+};
+
+/**********************************************************************/
+/* Pin Multiplex Helpers                                              */
+/*                                                                    */
+/* These provide userspace runtime pin configuration for the          */
+/* BeagleBone cape expansion headers                                  */
+/**********************************************************************/
+
+&ocp {
+	/************************/
+	/* P8 Header */
+	/************************/
+
+	/* P8_01                GND */
+
+	/* P8_02                GND */
+
+
+	/* P8_03 (ZCZ ball R9) emmc */
+	P8_03_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P8_03_default_pin>;
+		pinctrl-1 = <&P8_03_gpio_pin>;
+		pinctrl-2 = <&P8_03_gpio_pu_pin>;
+		pinctrl-3 = <&P8_03_gpio_pd_pin>;
+		pinctrl-4 = <&P8_03_gpio_input_pin>;
+	};
+
+	/* P8_04 (ZCZ ball T9) emmc */
+	P8_04_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P8_04_default_pin>;
+		pinctrl-1 = <&P8_04_gpio_pin>;
+		pinctrl-2 = <&P8_04_gpio_pu_pin>;
+		pinctrl-3 = <&P8_04_gpio_pd_pin>;
+		pinctrl-4 = <&P8_04_gpio_input_pin>;
+	};
+
+	/* P8_05 (ZCZ ball R8) emmc */
+	P8_05_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P8_05_default_pin>;
+		pinctrl-1 = <&P8_05_gpio_pin>;
+		pinctrl-2 = <&P8_05_gpio_pu_pin>;
+		pinctrl-3 = <&P8_05_gpio_pd_pin>;
+		pinctrl-4 = <&P8_05_gpio_input_pin>;
+	};
+
+	/* P8_06 (ZCZ ball T8) emmc */
+	P8_06_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P8_06_default_pin>;
+		pinctrl-1 = <&P8_06_gpio_pin>;
+		pinctrl-2 = <&P8_06_gpio_pu_pin>;
+		pinctrl-3 = <&P8_06_gpio_pd_pin>;
+		pinctrl-4 = <&P8_06_gpio_input_pin>;
+	};
+
+	/* P8_07 (ZCZ ball R7) */
+	P8_07_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer";
+		pinctrl-0 = <&P8_07_default_pin>;
+		pinctrl-1 = <&P8_07_gpio_pin>;
+		pinctrl-2 = <&P8_07_gpio_pu_pin>;
+		pinctrl-3 = <&P8_07_gpio_pd_pin>;
+		pinctrl-4 = <&P8_07_gpio_input_pin>;
+		pinctrl-5 = <&P8_07_timer_pin>;
+	};
+
+	/* P8_08 (ZCZ ball T7) */
+	P8_08_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer";
+		pinctrl-0 = <&P8_08_default_pin>;
+		pinctrl-1 = <&P8_08_gpio_pin>;
+		pinctrl-2 = <&P8_08_gpio_pu_pin>;
+		pinctrl-3 = <&P8_08_gpio_pd_pin>;
+		pinctrl-4 = <&P8_08_gpio_input_pin>;
+		pinctrl-5 = <&P8_08_timer_pin>;
+	};
+
+	/* P8_09 (ZCZ ball T6) */
+	P8_09_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer";
+		pinctrl-0 = <&P8_09_default_pin>;
+		pinctrl-1 = <&P8_09_gpio_pin>;
+		pinctrl-2 = <&P8_09_gpio_pu_pin>;
+		pinctrl-3 = <&P8_09_gpio_pd_pin>;
+		pinctrl-4 = <&P8_09_gpio_input_pin>;
+		pinctrl-5 = <&P8_09_timer_pin>;
+	};
+
+	/* P8_10 (ZCZ ball U6) */
+	P8_10_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer";
+		pinctrl-0 = <&P8_10_default_pin>;
+		pinctrl-1 = <&P8_10_gpio_pin>;
+		pinctrl-2 = <&P8_10_gpio_pu_pin>;
+		pinctrl-3 = <&P8_10_gpio_pd_pin>;
+		pinctrl-4 = <&P8_10_gpio_input_pin>;
+		pinctrl-5 = <&P8_10_timer_pin>;
+	};
+
+	/* P8_11 (ZCZ ball R12) */
+	P8_11_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout";
+		pinctrl-0 = <&P8_11_default_pin>;
+		pinctrl-1 = <&P8_11_gpio_pin>;
+		pinctrl-2 = <&P8_11_gpio_pu_pin>;
+		pinctrl-3 = <&P8_11_gpio_pd_pin>;
+		pinctrl-4 = <&P8_11_gpio_input_pin>;
+		pinctrl-5 = <&P8_11_qep_pin>;
+		pinctrl-6 = <&P8_11_pruout_pin>;
+	};
+
+	/* P8_12 (ZCZ ball T12) */
+	P8_12_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout";
+		pinctrl-0 = <&P8_12_default_pin>;
+		pinctrl-1 = <&P8_12_gpio_pin>;
+		pinctrl-2 = <&P8_12_gpio_pu_pin>;
+		pinctrl-3 = <&P8_12_gpio_pd_pin>;
+		pinctrl-4 = <&P8_12_gpio_input_pin>;
+		pinctrl-5 = <&P8_12_qep_pin>;
+		pinctrl-6 = <&P8_12_pruout_pin>;
+	};
+
+	/* P8_13 (ZCZ ball T10) */
+	P8_13_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm";
+		pinctrl-0 = <&P8_13_default_pin>;
+		pinctrl-1 = <&P8_13_gpio_pin>;
+		pinctrl-2 = <&P8_13_gpio_pu_pin>;
+		pinctrl-3 = <&P8_13_gpio_pd_pin>;
+		pinctrl-4 = <&P8_13_gpio_input_pin>;
+		pinctrl-5 = <&P8_13_pwm_pin>;
+	};
+
+	/* P8_14 (ZCZ ball T11) wl1835: wl_en */
+
+	/* P8_15 (ZCZ ball U13) */
+	P8_15_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pru_ecap", "pruin";
+		pinctrl-0 = <&P8_15_default_pin>;
+		pinctrl-1 = <&P8_15_gpio_pin>;
+		pinctrl-2 = <&P8_15_gpio_pu_pin>;
+		pinctrl-3 = <&P8_15_gpio_pd_pin>;
+		pinctrl-4 = <&P8_15_gpio_input_pin>;
+		pinctrl-5 = <&P8_15_qep_pin>;
+		pinctrl-6 = <&P8_15_pru_ecap_pin>;
+		pinctrl-7 = <&P8_15_pruin_pin>;
+	};
+
+	/* P8_16 (ZCZ ball V13) */
+	P8_16_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruin";
+		pinctrl-0 = <&P8_16_default_pin>;
+		pinctrl-1 = <&P8_16_gpio_pin>;
+		pinctrl-2 = <&P8_16_gpio_pu_pin>;
+		pinctrl-3 = <&P8_16_gpio_pd_pin>;
+		pinctrl-4 = <&P8_16_gpio_input_pin>;
+		pinctrl-5 = <&P8_16_qep_pin>;
+		pinctrl-6 = <&P8_16_pruin_pin>;
+	};
+
+	/* P8_17 (ZCZ ball U12) wl1835: wl_irq */
+
+	/* P8_18 (ZCZ ball V12) */
+	P8_18_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P8_18_default_pin>;
+		pinctrl-1 = <&P8_18_gpio_pin>;
+		pinctrl-2 = <&P8_18_gpio_pu_pin>;
+		pinctrl-3 = <&P8_18_gpio_pd_pin>;
+		pinctrl-4 = <&P8_18_gpio_input_pin>;
+	};
+
+	/* P8_19 (ZCZ ball U10) */
+	P8_19_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm";
+		pinctrl-0 = <&P8_19_default_pin>;
+		pinctrl-1 = <&P8_19_gpio_pin>;
+		pinctrl-2 = <&P8_19_gpio_pu_pin>;
+		pinctrl-3 = <&P8_19_gpio_pd_pin>;
+		pinctrl-4 = <&P8_19_gpio_input_pin>;
+		pinctrl-5 = <&P8_19_pwm_pin>;
+	};
+
+	/* P8_20 (ZCZ ball V9) emmc */
+	P8_20_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin";
+		pinctrl-0 = <&P8_20_default_pin>;
+		pinctrl-1 = <&P8_20_gpio_pin>;
+		pinctrl-2 = <&P8_20_gpio_pu_pin>;
+		pinctrl-3 = <&P8_20_gpio_pd_pin>;
+		pinctrl-4 = <&P8_20_gpio_input_pin>;
+		pinctrl-5 = <&P8_20_pruout_pin>;
+		pinctrl-6 = <&P8_20_pruin_pin>;
+	};
+
+	/* P8_21 (ZCZ ball U9) emmc */
+	P8_21_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin";
+		pinctrl-0 = <&P8_21_default_pin>;
+		pinctrl-1 = <&P8_21_gpio_pin>;
+		pinctrl-2 = <&P8_21_gpio_pu_pin>;
+		pinctrl-3 = <&P8_21_gpio_pd_pin>;
+		pinctrl-4 = <&P8_21_gpio_input_pin>;
+		pinctrl-5 = <&P8_21_pruout_pin>;
+		pinctrl-6 = <&P8_21_pruin_pin>;
+	};
+
+	/* P8_22 (ZCZ ball V8) emmc */
+	P8_22_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P8_22_default_pin>;
+		pinctrl-1 = <&P8_22_gpio_pin>;
+		pinctrl-2 = <&P8_22_gpio_pu_pin>;
+		pinctrl-3 = <&P8_22_gpio_pd_pin>;
+		pinctrl-4 = <&P8_22_gpio_input_pin>;
+	};
+
+	/* P8_23 (ZCZ ball U8) emmc */
+	P8_23_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P8_23_default_pin>;
+		pinctrl-1 = <&P8_23_gpio_pin>;
+		pinctrl-2 = <&P8_23_gpio_pu_pin>;
+		pinctrl-3 = <&P8_23_gpio_pd_pin>;
+		pinctrl-4 = <&P8_23_gpio_input_pin>;
+	};
+
+	/* P8_24 (ZCZ ball V7) emmc */
+	P8_24_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P8_24_default_pin>;
+		pinctrl-1 = <&P8_24_gpio_pin>;
+		pinctrl-2 = <&P8_24_gpio_pu_pin>;
+		pinctrl-3 = <&P8_24_gpio_pd_pin>;
+		pinctrl-4 = <&P8_24_gpio_input_pin>;
+	};
+
+	/* P8_25 (ZCZ ball U7) emmc */
+	P8_25_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P8_25_default_pin>;
+		pinctrl-1 = <&P8_25_gpio_pin>;
+		pinctrl-2 = <&P8_25_gpio_pu_pin>;
+		pinctrl-3 = <&P8_25_gpio_pd_pin>;
+		pinctrl-4 = <&P8_25_gpio_input_pin>;
+	};
+
+	/* P8_26 (ZCZ ball V6) gpio-hog wl1835 */
+
+	/* P8_27 (ZCZ ball U5) hdmi */
+	P8_27_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin";
+		pinctrl-0 = <&P8_27_default_pin>;
+		pinctrl-1 = <&P8_27_gpio_pin>;
+		pinctrl-2 = <&P8_27_gpio_pu_pin>;
+		pinctrl-3 = <&P8_27_gpio_pd_pin>;
+		pinctrl-4 = <&P8_27_gpio_input_pin>;
+		pinctrl-5 = <&P8_27_pruout_pin>;
+		pinctrl-6 = <&P8_27_pruin_pin>;
+	};
+
+	/* P8_28 (ZCZ ball V5) hdmi */
+	P8_28_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin";
+		pinctrl-0 = <&P8_28_default_pin>;
+		pinctrl-1 = <&P8_28_gpio_pin>;
+		pinctrl-2 = <&P8_28_gpio_pu_pin>;
+		pinctrl-3 = <&P8_28_gpio_pd_pin>;
+		pinctrl-4 = <&P8_28_gpio_input_pin>;
+		pinctrl-5 = <&P8_28_pruout_pin>;
+		pinctrl-6 = <&P8_28_pruin_pin>;
+	};
+
+	/* P8_29 (ZCZ ball R5) hdmi */
+	P8_29_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin";
+		pinctrl-0 = <&P8_29_default_pin>;
+		pinctrl-1 = <&P8_29_gpio_pin>;
+		pinctrl-2 = <&P8_29_gpio_pu_pin>;
+		pinctrl-3 = <&P8_29_gpio_pd_pin>;
+		pinctrl-4 = <&P8_29_gpio_input_pin>;
+		pinctrl-5 = <&P8_29_pruout_pin>;
+		pinctrl-6 = <&P8_29_pruin_pin>;
+	};
+
+	/* P8_30 (ZCZ ball R6) hdmi */
+	P8_30_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin";
+		pinctrl-0 = <&P8_30_default_pin>;
+		pinctrl-1 = <&P8_30_gpio_pin>;
+		pinctrl-2 = <&P8_30_gpio_pu_pin>;
+		pinctrl-3 = <&P8_30_gpio_pd_pin>;
+		pinctrl-4 = <&P8_30_gpio_input_pin>;
+		pinctrl-5 = <&P8_30_pruout_pin>;
+		pinctrl-6 = <&P8_30_pruin_pin>;
+	};
+
+	/* P8_31 (ZCZ ball V4) hdmi */
+	P8_31_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "qep";
+		pinctrl-0 = <&P8_31_default_pin>;
+		pinctrl-1 = <&P8_31_gpio_pin>;
+		pinctrl-2 = <&P8_31_gpio_pu_pin>;
+		pinctrl-3 = <&P8_31_gpio_pd_pin>;
+		pinctrl-4 = <&P8_31_gpio_input_pin>;
+		pinctrl-5 = <&P8_31_uart_pin>;
+		pinctrl-6 = <&P8_31_qep_pin>;
+	};
+
+	/* P8_32 (ZCZ ball T5) hdmi */
+	P8_32_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep";
+		pinctrl-0 = <&P8_32_default_pin>;
+		pinctrl-1 = <&P8_32_gpio_pin>;
+		pinctrl-2 = <&P8_32_gpio_pu_pin>;
+		pinctrl-3 = <&P8_32_gpio_pd_pin>;
+		pinctrl-4 = <&P8_32_gpio_input_pin>;
+		pinctrl-5 = <&P8_32_qep_pin>;
+	};
+
+	/* P8_33 (ZCZ ball V3) hdmi */
+	P8_33_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep";
+		pinctrl-0 = <&P8_33_default_pin>;
+		pinctrl-1 = <&P8_33_gpio_pin>;
+		pinctrl-2 = <&P8_33_gpio_pu_pin>;
+		pinctrl-3 = <&P8_33_gpio_pd_pin>;
+		pinctrl-4 = <&P8_33_gpio_input_pin>;
+		pinctrl-5 = <&P8_33_qep_pin>;
+	};
+
+	/* P8_34 (ZCZ ball U4) hdmi */
+	P8_34_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm";
+		pinctrl-0 = <&P8_34_default_pin>;
+		pinctrl-1 = <&P8_34_gpio_pin>;
+		pinctrl-2 = <&P8_34_gpio_pu_pin>;
+		pinctrl-3 = <&P8_34_gpio_pd_pin>;
+		pinctrl-4 = <&P8_34_gpio_input_pin>;
+		pinctrl-5 = <&P8_34_pwm_pin>;
+	};
+
+	/* P8_35 (ZCZ ball V2) hdmi */
+	P8_35_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep";
+		pinctrl-0 = <&P8_35_default_pin>;
+		pinctrl-1 = <&P8_35_gpio_pin>;
+		pinctrl-2 = <&P8_35_gpio_pu_pin>;
+		pinctrl-3 = <&P8_35_gpio_pd_pin>;
+		pinctrl-4 = <&P8_35_gpio_input_pin>;
+		pinctrl-5 = <&P8_35_qep_pin>;
+	};
+
+	/* P8_36 (ZCZ ball U3) hdmi */
+	P8_36_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm";
+		pinctrl-0 = <&P8_36_default_pin>;
+		pinctrl-1 = <&P8_36_gpio_pin>;
+		pinctrl-2 = <&P8_36_gpio_pu_pin>;
+		pinctrl-3 = <&P8_36_gpio_pd_pin>;
+		pinctrl-4 = <&P8_36_gpio_input_pin>;
+		pinctrl-5 = <&P8_36_pwm_pin>;
+	};
+
+	/* P8_37 (ZCZ ball U1) hdmi */
+	P8_37_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "pwm";
+		pinctrl-0 = <&P8_37_default_pin>;
+		pinctrl-1 = <&P8_37_gpio_pin>;
+		pinctrl-2 = <&P8_37_gpio_pu_pin>;
+		pinctrl-3 = <&P8_37_gpio_pd_pin>;
+		pinctrl-4 = <&P8_37_gpio_input_pin>;
+		pinctrl-5 = <&P8_37_uart_pin>;
+		pinctrl-6 = <&P8_37_pwm_pin>;
+	};
+
+	/* P8_38 (ZCZ ball U2) hdmi */
+	P8_38_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "pwm";
+		pinctrl-0 = <&P8_38_default_pin>;
+		pinctrl-1 = <&P8_38_gpio_pin>;
+		pinctrl-2 = <&P8_38_gpio_pu_pin>;
+		pinctrl-3 = <&P8_38_gpio_pd_pin>;
+		pinctrl-4 = <&P8_38_gpio_input_pin>;
+		pinctrl-5 = <&P8_38_uart_pin>;
+		pinctrl-6 = <&P8_38_pwm_pin>;
+	};
+
+	/* P8_39 (ZCZ ball T3) hdmi */
+	P8_39_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin";
+		pinctrl-0 = <&P8_39_default_pin>;
+		pinctrl-1 = <&P8_39_gpio_pin>;
+		pinctrl-2 = <&P8_39_gpio_pu_pin>;
+		pinctrl-3 = <&P8_39_gpio_pd_pin>;
+		pinctrl-4 = <&P8_39_gpio_input_pin>;
+		pinctrl-5 = <&P8_39_qep_pin>;
+		pinctrl-6 = <&P8_39_pruout_pin>;
+		pinctrl-7 = <&P8_39_pruin_pin>;
+	};
+
+	/* P8_40 (ZCZ ball T4) hdmi */
+	P8_40_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin";
+		pinctrl-0 = <&P8_40_default_pin>;
+		pinctrl-1 = <&P8_40_gpio_pin>;
+		pinctrl-2 = <&P8_40_gpio_pu_pin>;
+		pinctrl-3 = <&P8_40_gpio_pd_pin>;
+		pinctrl-4 = <&P8_40_gpio_input_pin>;
+		pinctrl-5 = <&P8_40_qep_pin>;
+		pinctrl-6 = <&P8_40_pruout_pin>;
+		pinctrl-7 = <&P8_40_pruin_pin>;
+	};
+
+	/* P8_41 (ZCZ ball T1) hdmi */
+	P8_41_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin";
+		pinctrl-0 = <&P8_41_default_pin>;
+		pinctrl-1 = <&P8_41_gpio_pin>;
+		pinctrl-2 = <&P8_41_gpio_pu_pin>;
+		pinctrl-3 = <&P8_41_gpio_pd_pin>;
+		pinctrl-4 = <&P8_41_gpio_input_pin>;
+		pinctrl-5 = <&P8_41_qep_pin>;
+		pinctrl-6 = <&P8_41_pruout_pin>;
+		pinctrl-7 = <&P8_41_pruin_pin>;
+	};
+
+	/* P8_42 (ZCZ ball T2) hdmi */
+	P8_42_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin";
+		pinctrl-0 = <&P8_42_default_pin>;
+		pinctrl-1 = <&P8_42_gpio_pin>;
+		pinctrl-2 = <&P8_42_gpio_pu_pin>;
+		pinctrl-3 = <&P8_42_gpio_pd_pin>;
+		pinctrl-4 = <&P8_42_gpio_input_pin>;
+		pinctrl-5 = <&P8_42_qep_pin>;
+		pinctrl-6 = <&P8_42_pruout_pin>;
+		pinctrl-7 = <&P8_42_pruin_pin>;
+	};
+
+	/* P8_43 (ZCZ ball R3) hdmi */
+	P8_43_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm", "pruout", "pruin";
+		pinctrl-0 = <&P8_43_default_pin>;
+		pinctrl-1 = <&P8_43_gpio_pin>;
+		pinctrl-2 = <&P8_43_gpio_pu_pin>;
+		pinctrl-3 = <&P8_43_gpio_pd_pin>;
+		pinctrl-4 = <&P8_43_gpio_input_pin>;
+		pinctrl-5 = <&P8_43_pwm_pin>;
+		pinctrl-6 = <&P8_43_pruout_pin>;
+		pinctrl-7 = <&P8_43_pruin_pin>;
+	};
+
+	/* P8_44 (ZCZ ball R4) hdmi */
+	P8_44_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm", "pruout", "pruin";
+		pinctrl-0 = <&P8_44_default_pin>;
+		pinctrl-1 = <&P8_44_gpio_pin>;
+		pinctrl-2 = <&P8_44_gpio_pu_pin>;
+		pinctrl-3 = <&P8_44_gpio_pd_pin>;
+		pinctrl-4 = <&P8_44_gpio_input_pin>;
+		pinctrl-5 = <&P8_44_pwm_pin>;
+		pinctrl-6 = <&P8_44_pruout_pin>;
+		pinctrl-7 = <&P8_44_pruin_pin>;
+	};
+
+	/* P8_45 (ZCZ ball R1) hdmi */
+	P8_45_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm", "pruout", "pruin";
+		pinctrl-0 = <&P8_45_default_pin>;
+		pinctrl-1 = <&P8_45_gpio_pin>;
+		pinctrl-2 = <&P8_45_gpio_pu_pin>;
+		pinctrl-3 = <&P8_45_gpio_pd_pin>;
+		pinctrl-4 = <&P8_45_gpio_input_pin>;
+		pinctrl-5 = <&P8_45_pwm_pin>;
+		pinctrl-6 = <&P8_45_pruout_pin>;
+		pinctrl-7 = <&P8_45_pruin_pin>;
+	};
+
+	/* P8_46 (ZCZ ball R2) hdmi */
+	P8_46_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm", "pruout", "pruin";
+		pinctrl-0 = <&P8_46_default_pin>;
+		pinctrl-1 = <&P8_46_gpio_pin>;
+		pinctrl-2 = <&P8_46_gpio_pu_pin>;
+		pinctrl-3 = <&P8_46_gpio_pd_pin>;
+		pinctrl-4 = <&P8_46_gpio_input_pin>;
+		pinctrl-5 = <&P8_46_pwm_pin>;
+		pinctrl-6 = <&P8_46_pruout_pin>;
+		pinctrl-7 = <&P8_46_pruin_pin>;
+	};
+
+	/************************/
+	/* P9 Header */
+	/************************/
+
+	/* P9_01                GND */
+
+	/* P9_02                GND */
+
+	/* P9_03                3V3 */
+
+	/* P9_04                3V3 */
+
+	/* P9_05                VDD_5V */
+
+	/* P9_06                VDD_5V */
+
+	/* P9_07                SYS_5V */
+
+	/* P9_08                SYS_5V */
+
+	/* P9_09                PWR_BUT */
+
+	/* P9_10                RSTn */
+
+	/* P9_11 (ZCZ ball T17) */
+	P9_11_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart";
+		pinctrl-0 = <&P9_11_default_pin>;
+		pinctrl-1 = <&P9_11_gpio_pin>;
+		pinctrl-2 = <&P9_11_gpio_pu_pin>;
+		pinctrl-3 = <&P9_11_gpio_pd_pin>;
+		pinctrl-4 = <&P9_11_gpio_input_pin>;
+		pinctrl-5 = <&P9_11_uart_pin>;
+	};
+
+	/* P9_12 (ZCZ ball U18) */
+	P9_12_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P9_12_default_pin>;
+		pinctrl-1 = <&P9_12_gpio_pin>;
+		pinctrl-2 = <&P9_12_gpio_pu_pin>;
+		pinctrl-3 = <&P9_12_gpio_pd_pin>;
+		pinctrl-4 = <&P9_12_gpio_input_pin>;
+	};
+
+	/* P9_13 (ZCZ ball U17) */
+	P9_13_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart";
+		pinctrl-0 = <&P9_13_default_pin>;
+		pinctrl-1 = <&P9_13_gpio_pin>;
+		pinctrl-2 = <&P9_13_gpio_pu_pin>;
+		pinctrl-3 = <&P9_13_gpio_pd_pin>;
+		pinctrl-4 = <&P9_13_gpio_input_pin>;
+		pinctrl-5 = <&P9_13_uart_pin>;
+	};
+
+	/* P9_14 (ZCZ ball U14) */
+	P9_14_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm";
+		pinctrl-0 = <&P9_14_default_pin>;
+		pinctrl-1 = <&P9_14_gpio_pin>;
+		pinctrl-2 = <&P9_14_gpio_pu_pin>;
+		pinctrl-3 = <&P9_14_gpio_pd_pin>;
+		pinctrl-4 = <&P9_14_gpio_input_pin>;
+		pinctrl-5 = <&P9_14_pwm_pin>;
+	};
+
+	/* P9_15 (ZCZ ball R13) */
+	P9_15_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm";
+		pinctrl-0 = <&P9_15_default_pin>;
+		pinctrl-1 = <&P9_15_gpio_pin>;
+		pinctrl-2 = <&P9_15_gpio_pu_pin>;
+		pinctrl-3 = <&P9_15_gpio_pd_pin>;
+		pinctrl-4 = <&P9_15_gpio_input_pin>;
+		pinctrl-5 = <&P9_15_pwm_pin>;
+	};
+
+	/* P9_16 (ZCZ ball T14) */
+	P9_16_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm";
+		pinctrl-0 = <&P9_16_default_pin>;
+		pinctrl-1 = <&P9_16_gpio_pin>;
+		pinctrl-2 = <&P9_16_gpio_pu_pin>;
+		pinctrl-3 = <&P9_16_gpio_pd_pin>;
+		pinctrl-4 = <&P9_16_gpio_input_pin>;
+		pinctrl-5 = <&P9_16_pwm_pin>;
+	};
+
+	/* P9_17 (ZCZ ball A16) */
+	P9_17_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "i2c", "pwm", "pru_uart";
+		pinctrl-0 = <&P9_17_default_pin>;
+		pinctrl-1 = <&P9_17_gpio_pin>;
+		pinctrl-2 = <&P9_17_gpio_pu_pin>;
+		pinctrl-3 = <&P9_17_gpio_pd_pin>;
+		pinctrl-4 = <&P9_17_gpio_input_pin>;
+		pinctrl-5 = <&P9_17_spi_cs_pin>;
+		pinctrl-6 = <&P9_17_i2c_pin>;
+		pinctrl-7 = <&P9_17_pwm_pin>;
+		pinctrl-8 = <&P9_17_pru_uart_pin>;
+	};
+
+	/* P9_18 (ZCZ ball B16) */
+	P9_18_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "i2c", "pwm", "pru_uart";
+		pinctrl-0 = <&P9_18_default_pin>;
+		pinctrl-1 = <&P9_18_gpio_pin>;
+		pinctrl-2 = <&P9_18_gpio_pu_pin>;
+		pinctrl-3 = <&P9_18_gpio_pd_pin>;
+		pinctrl-4 = <&P9_18_gpio_input_pin>;
+		pinctrl-5 = <&P9_18_spi_pin>;
+		pinctrl-6 = <&P9_18_i2c_pin>;
+		pinctrl-7 = <&P9_18_pwm_pin>;
+		pinctrl-8 = <&P9_18_pru_uart_pin>;
+	};
+
+	/* P9_19 (ZCZ ball D17) i2c */
+	P9_19_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "can", "i2c", "pru_uart", "timer";
+		pinctrl-0 = <&P9_19_default_pin>;
+		pinctrl-1 = <&P9_19_gpio_pin>;
+		pinctrl-2 = <&P9_19_gpio_pu_pin>;
+		pinctrl-3 = <&P9_19_gpio_pd_pin>;
+		pinctrl-4 = <&P9_19_gpio_input_pin>;
+		pinctrl-5 = <&P9_19_spi_cs_pin>;
+		pinctrl-6 = <&P9_19_can_pin>;
+		pinctrl-7 = <&P9_19_i2c_pin>;
+		pinctrl-8 = <&P9_19_pru_uart_pin>;
+		pinctrl-9 = <&P9_19_timer_pin>;
+	};
+
+	/* P9_20 (ZCZ ball D18) i2c */
+	P9_20_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "can", "i2c", "pru_uart", "timer";
+		pinctrl-0 = <&P9_20_default_pin>;
+		pinctrl-1 = <&P9_20_gpio_pin>;
+		pinctrl-2 = <&P9_20_gpio_pu_pin>;
+		pinctrl-3 = <&P9_20_gpio_pd_pin>;
+		pinctrl-4 = <&P9_20_gpio_input_pin>;
+		pinctrl-5 = <&P9_20_spi_cs_pin>;
+		pinctrl-6 = <&P9_20_can_pin>;
+		pinctrl-7 = <&P9_20_i2c_pin>;
+		pinctrl-8 = <&P9_20_pru_uart_pin>;
+		pinctrl-9 = <&P9_20_timer_pin>;
+	};
+
+	/* P9_21 (ZCZ ball B17) */
+	P9_21_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "uart", "i2c", "pwm", "pru_uart";
+		pinctrl-0 = <&P9_21_default_pin>;
+		pinctrl-1 = <&P9_21_gpio_pin>;
+		pinctrl-2 = <&P9_21_gpio_pu_pin>;
+		pinctrl-3 = <&P9_21_gpio_pd_pin>;
+		pinctrl-4 = <&P9_21_gpio_input_pin>;
+		pinctrl-5 = <&P9_21_spi_pin>;
+		pinctrl-6 = <&P9_21_uart_pin>;
+		pinctrl-7 = <&P9_21_i2c_pin>;
+		pinctrl-8 = <&P9_21_pwm_pin>;
+		pinctrl-9 = <&P9_21_pru_uart_pin>;
+	};
+
+	/* P9_22 (ZCZ ball A17) */
+	P9_22_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_sclk", "uart", "i2c", "pwm", "pru_uart";
+		pinctrl-0 = <&P9_22_default_pin>;
+		pinctrl-1 = <&P9_22_gpio_pin>;
+		pinctrl-2 = <&P9_22_gpio_pu_pin>;
+		pinctrl-3 = <&P9_22_gpio_pd_pin>;
+		pinctrl-4 = <&P9_22_gpio_input_pin>;
+		pinctrl-5 = <&P9_22_spi_sclk_pin>;
+		pinctrl-6 = <&P9_22_uart_pin>;
+		pinctrl-7 = <&P9_22_i2c_pin>;
+		pinctrl-8 = <&P9_22_pwm_pin>;
+		pinctrl-9 = <&P9_22_pru_uart_pin>;
+	};
+
+	/* P9_23 (ZCZ ball V14) */
+	P9_23_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm";
+		pinctrl-0 = <&P9_23_default_pin>;
+		pinctrl-1 = <&P9_23_gpio_pin>;
+		pinctrl-2 = <&P9_23_gpio_pu_pin>;
+		pinctrl-3 = <&P9_23_gpio_pd_pin>;
+		pinctrl-4 = <&P9_23_gpio_input_pin>;
+		pinctrl-5 = <&P9_23_pwm_pin>;
+	};
+
+	/* P9_24 (ZCZ ball D15) */
+	P9_24_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "can", "i2c", "pru_uart", "pruin";
+		pinctrl-0 = <&P9_24_default_pin>;
+		pinctrl-1 = <&P9_24_gpio_pin>;
+		pinctrl-2 = <&P9_24_gpio_pu_pin>;
+		pinctrl-3 = <&P9_24_gpio_pd_pin>;
+		pinctrl-4 = <&P9_24_gpio_input_pin>;
+		pinctrl-5 = <&P9_24_uart_pin>;
+		pinctrl-6 = <&P9_24_can_pin>;
+		pinctrl-7 = <&P9_24_i2c_pin>;
+		pinctrl-8 = <&P9_24_pru_uart_pin>;
+		pinctrl-9 = <&P9_24_pruin_pin>;
+	};
+
+	/* P9_25 (ZCZ ball A14) audio */
+	P9_25_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin";
+		pinctrl-0 = <&P9_25_default_pin>;
+		pinctrl-1 = <&P9_25_gpio_pin>;
+		pinctrl-2 = <&P9_25_gpio_pu_pin>;
+		pinctrl-3 = <&P9_25_gpio_pd_pin>;
+		pinctrl-4 = <&P9_25_gpio_input_pin>;
+		pinctrl-5 = <&P9_25_qep_pin>;
+		pinctrl-6 = <&P9_25_pruout_pin>;
+		pinctrl-7 = <&P9_25_pruin_pin>;
+	};
+
+	/* P9_26 (ZCZ ball D16) */
+	P9_26_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "can", "i2c", "pru_uart", "pruin";
+		pinctrl-0 = <&P9_26_default_pin>;
+		pinctrl-1 = <&P9_26_gpio_pin>;
+		pinctrl-2 = <&P9_26_gpio_pu_pin>;
+		pinctrl-3 = <&P9_26_gpio_pd_pin>;
+		pinctrl-4 = <&P9_26_gpio_input_pin>;
+		pinctrl-5 = <&P9_26_uart_pin>;
+		pinctrl-6 = <&P9_26_can_pin>;
+		pinctrl-7 = <&P9_26_i2c_pin>;
+		pinctrl-8 = <&P9_26_pru_uart_pin>;
+		pinctrl-9 = <&P9_26_pruin_pin>;
+	};
+
+	/* P9_27 (ZCZ ball C13) */
+	P9_27_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin";
+		pinctrl-0 = <&P9_27_default_pin>;
+		pinctrl-1 = <&P9_27_gpio_pin>;
+		pinctrl-2 = <&P9_27_gpio_pu_pin>;
+		pinctrl-3 = <&P9_27_gpio_pd_pin>;
+		pinctrl-4 = <&P9_27_gpio_input_pin>;
+		pinctrl-5 = <&P9_27_qep_pin>;
+		pinctrl-6 = <&P9_27_pruout_pin>;
+		pinctrl-7 = <&P9_27_pruin_pin>;
+	};
+
+	/* P9_28 (ZCZ ball C12) audio */
+	P9_28_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "pwm", "pwm2", "pruout", "pruin";
+		pinctrl-0 = <&P9_28_default_pin>;
+		pinctrl-1 = <&P9_28_gpio_pin>;
+		pinctrl-2 = <&P9_28_gpio_pu_pin>;
+		pinctrl-3 = <&P9_28_gpio_pd_pin>;
+		pinctrl-4 = <&P9_28_gpio_input_pin>;
+		pinctrl-5 = <&P9_28_spi_cs_pin>;
+		pinctrl-6 = <&P9_28_pwm_pin>;
+		pinctrl-7 = <&P9_28_pwm2_pin>;
+		pinctrl-8 = <&P9_28_pruout_pin>;
+		pinctrl-9 = <&P9_28_pruin_pin>;
+	};
+
+	/* P9_29 (ZCZ ball B13) audio */
+	P9_29_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "pwm", "pruout", "pruin";
+		pinctrl-0 = <&P9_29_default_pin>;
+		pinctrl-1 = <&P9_29_gpio_pin>;
+		pinctrl-2 = <&P9_29_gpio_pu_pin>;
+		pinctrl-3 = <&P9_29_gpio_pd_pin>;
+		pinctrl-4 = <&P9_29_gpio_input_pin>;
+		pinctrl-5 = <&P9_29_spi_pin>;
+		pinctrl-6 = <&P9_29_pwm_pin>;
+		pinctrl-7 = <&P9_29_pruout_pin>;
+		pinctrl-8 = <&P9_29_pruin_pin>;
+	};
+
+	/* P9_30 (ZCZ ball D12) gpio-hog wl1835 */
+
+	/* P9_31 (ZCZ ball A13) audio */
+	P9_31_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_sclk", "pwm", "pruout", "pruin";
+		pinctrl-0 = <&P9_31_default_pin>;
+		pinctrl-1 = <&P9_31_gpio_pin>;
+		pinctrl-2 = <&P9_31_gpio_pu_pin>;
+		pinctrl-3 = <&P9_31_gpio_pd_pin>;
+		pinctrl-4 = <&P9_31_gpio_input_pin>;
+		pinctrl-5 = <&P9_31_spi_sclk_pin>;
+		pinctrl-6 = <&P9_31_pwm_pin>;
+		pinctrl-7 = <&P9_31_pruout_pin>;
+		pinctrl-8 = <&P9_31_pruin_pin>;
+	};
+
+	/* P9_32                VADC */
+
+	/* P9_33 (ZCZ ball C8)  AIN4         */
+
+	/* P9_34                AGND */
+
+	/* P9_35 (ZCZ ball A8)  AIN6         */
+
+	/* P9_36 (ZCZ ball B8)  AIN5         */
+
+	/* P9_37 (ZCZ ball B7)  AIN2         */
+
+	/* P9_38 (ZCZ ball A7)  AIN3         */
+
+	/* P9_39 (ZCZ ball B6)  AIN0         */
+
+	/* P9_40 (ZCZ ball C7)  AIN1         */
+
+	/* P9_41 (ZCZ ball D14) */
+	P9_41_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "timer", "pruin";
+		pinctrl-0 = <&P9_41_default_pin>;
+		pinctrl-1 = <&P9_41_gpio_pin>;
+		pinctrl-2 = <&P9_41_gpio_pu_pin>;
+		pinctrl-3 = <&P9_41_gpio_pd_pin>;
+		pinctrl-4 = <&P9_41_gpio_input_pin>;
+		pinctrl-5 = <&P9_41_timer_pin>;
+		pinctrl-6 = <&P9_41_pruin_pin>;
+	};
+
+	/* P9_41.1 */
+	/* P9_91 (ZCZ ball D13) */
+	P9_91_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin";
+		pinctrl-0 = <&P9_91_default_pin>;
+		pinctrl-1 = <&P9_91_gpio_pin>;
+		pinctrl-2 = <&P9_91_gpio_pu_pin>;
+		pinctrl-3 = <&P9_91_gpio_pd_pin>;
+		pinctrl-4 = <&P9_91_gpio_input_pin>;
+		pinctrl-5 = <&P9_91_qep_pin>;
+		pinctrl-6 = <&P9_91_pruout_pin>;
+		pinctrl-7 = <&P9_91_pruin_pin>;
+	};
+
+	/* P9_42 (ZCZ ball C18) */
+	P9_42_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "spi_sclk", "uart", "pwm", "pru_ecap";
+		pinctrl-0 = <&P9_42_default_pin>;
+		pinctrl-1 = <&P9_42_gpio_pin>;
+		pinctrl-2 = <&P9_42_gpio_pu_pin>;
+		pinctrl-3 = <&P9_42_gpio_pd_pin>;
+		pinctrl-4 = <&P9_42_gpio_input_pin>;
+		pinctrl-5 = <&P9_42_spi_cs_pin>;
+		pinctrl-6 = <&P9_42_spi_sclk_pin>;
+		pinctrl-7 = <&P9_42_uart_pin>;
+		pinctrl-8 = <&P9_42_pwm_pin>;
+		pinctrl-9 = <&P9_42_pru_ecap_pin>;
+	};
+
+	/* P9_42.1 */
+	/* P9_92 (ZCZ ball B12) */
+	P9_92_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin";
+		pinctrl-0 = <&P9_92_default_pin>;
+		pinctrl-1 = <&P9_92_gpio_pin>;
+		pinctrl-2 = <&P9_92_gpio_pu_pin>;
+		pinctrl-3 = <&P9_92_gpio_pd_pin>;
+		pinctrl-4 = <&P9_92_gpio_input_pin>;
+		pinctrl-5 = <&P9_92_qep_pin>;
+		pinctrl-6 = <&P9_92_pruout_pin>;
+		pinctrl-7 = <&P9_92_pruin_pin>;
+	};
+
+	/* P9_43                GND */
+
+	/* P9_44                GND */
+
+	/* P9_45                GND */
+
+	/* P9_46                GND */
+
+	cape-universal {
+		compatible = "gpio-of-helper";
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <>;
+
+		P8_03 {
+			gpio-name = "P8_03";
+			gpio = <&gpio1 6 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_04 {
+			gpio-name = "P8_04";
+			gpio = <&gpio1 7 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_05 {
+			gpio-name = "P8_05";
+			gpio = <&gpio1 2 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_06 {
+			gpio-name = "P8_06";
+			gpio = <&gpio1 3 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_07 {
+			gpio-name = "P8_07";
+			gpio = <&gpio2 2 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_08 {
+			gpio-name = "P8_08";
+			gpio = <&gpio2 3 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_09 {
+			gpio-name = "P8_09";
+			gpio = <&gpio2 5 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_10 {
+			gpio-name = "P8_10";
+			gpio = <&gpio2 4 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_11 {
+			gpio-name = "P8_11";
+			gpio = <&gpio1 13 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_12 {
+			gpio-name = "P8_12";
+			gpio = <&gpio1 12 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_13 {
+			gpio-name = "P8_13";
+			gpio = <&gpio0 23 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_15 {
+			gpio-name = "P8_15";
+			gpio = <&gpio1 15 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_16 {
+			gpio-name = "P8_16";
+			gpio = <&gpio1 14 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_18 {
+			gpio-name = "P8_18";
+			gpio = <&gpio2 1 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_19 {
+			gpio-name = "P8_19";
+			gpio = <&gpio0 22 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_20 {
+			gpio-name = "P8_20";
+			gpio = <&gpio1 31 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_21 {
+			gpio-name = "P8_21";
+			gpio = <&gpio1 30 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_22 {
+			gpio-name = "P8_22";
+			gpio = <&gpio1 5 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_23 {
+			gpio-name = "P8_23";
+			gpio = <&gpio1 4 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_24 {
+			gpio-name = "P8_24";
+			gpio = <&gpio1 1 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_25 {
+			gpio-name = "P8_25";
+			gpio = <&gpio1 0 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_27 {
+			gpio-name = "P8_27";
+			gpio = <&gpio2 22 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_28 {
+			gpio-name = "P8_28";
+			gpio = <&gpio2 24 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_29 {
+			gpio-name = "P8_29";
+			gpio = <&gpio2 23 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_30 {
+			gpio-name = "P8_30";
+			gpio = <&gpio2 25 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_31 {
+			gpio-name = "P8_31";
+			gpio = <&gpio0 10 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_32 {
+			gpio-name = "P8_32";
+			gpio = <&gpio0 11 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_33 {
+			gpio-name = "P8_33";
+			gpio = <&gpio0 9 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_34 {
+			gpio-name = "P8_34";
+			gpio = <&gpio2 17 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_35 {
+			gpio-name = "P8_35";
+			gpio = <&gpio0 8 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_36 {
+			gpio-name = "P8_36";
+			gpio = <&gpio2 16 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_37 {
+			gpio-name = "P8_37";
+			gpio = <&gpio2 14 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_38 {
+			gpio-name = "P8_38";
+			gpio = <&gpio2 15 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_39 {
+			gpio-name = "P8_39";
+			gpio = <&gpio2 12 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_40 {
+			gpio-name = "P8_40";
+			gpio = <&gpio2 13 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_41 {
+			gpio-name = "P8_41";
+			gpio = <&gpio2 10 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_42 {
+			gpio-name = "P8_42";
+			gpio = <&gpio2 11 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_43 {
+			gpio-name = "P8_43";
+			gpio = <&gpio2 8 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_44 {
+			gpio-name = "P8_44";
+			gpio = <&gpio2 9 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_45 {
+			gpio-name = "P8_45";
+			gpio = <&gpio2 6 0>;
+			input;
+			dir-changeable;
+		};
+
+		P8_46 {
+			gpio-name = "P8_46";
+			gpio = <&gpio2 7 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_11 {
+			gpio-name = "P9_11";
+			gpio = <&gpio0 30 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_12 {
+			gpio-name = "P9_12";
+			gpio = <&gpio1 28 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_13 {
+			gpio-name = "P9_13";
+			gpio = <&gpio0 31 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_14 {
+			gpio-name = "P9_14";
+			gpio = <&gpio1 18 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_15 {
+			gpio-name = "P9_15";
+			gpio = <&gpio1 16 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_16 {
+			gpio-name = "P9_16";
+			gpio = <&gpio1 19 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_17 {
+			gpio-name = "P9_17";
+			gpio = <&gpio0 5 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_18 {
+			gpio-name = "P9_18";
+			gpio = <&gpio0 4 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_19 {
+			gpio-name = "P9_19";
+			gpio = <&gpio0 13 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_20 {
+			gpio-name = "P9_20";
+			gpio = <&gpio0 12 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_21 {
+			gpio-name = "P9_21";
+			gpio = <&gpio0 3 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_22 {
+			gpio-name = "P9_22";
+			gpio = <&gpio0 2 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_23 {
+			gpio-name = "P9_23";
+			gpio = <&gpio1 17 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_24 {
+			gpio-name = "P9_24";
+			gpio = <&gpio0 15 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_25 {
+			gpio-name = "P9_25";
+			gpio = <&gpio3 21 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_26 {
+			gpio-name = "P9_26";
+			gpio = <&gpio0 14 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_27 {
+			gpio-name = "P9_27";
+			gpio = <&gpio3 19 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_28 {
+			gpio-name = "P9_28";
+			gpio = <&gpio3 17 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_29 {
+			gpio-name = "P9_29";
+			gpio = <&gpio3 15 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_31 {
+			gpio-name = "P9_31";
+			gpio = <&gpio3 14 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_41 {
+			gpio-name = "P9_41";
+			gpio = <&gpio0 20 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_91 {
+			gpio-name = "P9_91";
+			gpio = <&gpio3 20 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_42 {
+			gpio-name = "P9_42";
+			gpio = <&gpio0 7 0>;
+			input;
+			dir-changeable;
+		};
+
+		P9_92 {
+			gpio-name = "P9_92";
+			gpio = <&gpio3 18 0>;
+			input;
+			dir-changeable;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless-uboot-univ.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless-uboot-univ.dts
new file mode 100644
index 000000000..02fbbe9ec
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-bonegreen-wireless-uboot-univ.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-bonegreen-wireless-common-univ.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "TI AM335x BeagleBone Green Wireless";
+	compatible = "ti,am335x-bone-green-wireless", "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+
+	chosen {
+		base_dtb = "am335x-bonegreen-wireless-uboot-univ.dts";
+		base_dtb_timestamp = __TIMESTAMP__;
+	};
+};
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&gpio1 {
+	ls-buf-en-hog {
+		gpio-hog;
+		gpios = <29 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LS_BUF_EN";
+	};
+};
+
+/* BT_AUD_OUT from wl1835 has to be pulled low when WL_EN is activated.*/
+/* in case it isn't, wilink8 ends up in one of the test modes that     */
+/* intruces various issues (elp wkaeup timeouts etc.)                  */
+/* On the BBGW this pin is routed through the level shifter (U21) that */
+/* introduces a pullup on the line and wilink8 ends up in a bad state. */
+/* use a gpio hog to force this pin low. An alternative may be adding  */
+/* an external pulldown on U21 pin 4.                                  */
+
+&gpio3 {
+	bt-aud-in-hog {
+		gpio-hog;
+		gpios = <16 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "MCASP0_AHCLKR";
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
index 215f279e4..0952a637b 100644
--- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
+++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
@@ -13,6 +13,11 @@ / {
 	model = "TI AM335x BeagleBone Green Wireless";
 	compatible = "ti,am335x-bone-green-wireless", "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
 
+	chosen {
+		base_dtb = "am335x-bonegreen-wireless.dts";
+		base_dtb_timestamp = __TIMESTAMP__;
+	};
+
 	wlan_en_reg: fixedregulator@2 {
 		compatible = "regulator-fixed";
 		regulator-name = "wlan-en-regulator";
diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts
index 18cc0f49e..62ca9c876 100644
--- a/arch/arm/boot/dts/am335x-bonegreen.dts
+++ b/arch/arm/boot/dts/am335x-bonegreen.dts
@@ -11,4 +11,9 @@
 / {
 	model = "TI AM335x BeagleBone Green";
 	compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+
+	chosen {
+		base_dtb = "am335x-bonegreen.dts";
+		base_dtb_timestamp = __TIMESTAMP__;
+	};
 };
diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
index b2846cd22..adb61e134 100644
--- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
+++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
@@ -10,13 +10,16 @@
 
 #include "am33xx.dtsi"
 #include "am335x-osd335x-common.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#include <dt-bindings/display/tda998x.h>
+#include "am335x-boneblack-hdmi.dtsi"
 
 / {
 	model = "Octavo Systems OSD3358-SM-RED";
 	compatible = "oct,osd3358-sm-refdesign", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+
+	chosen {
+		base_dtb = "am335x-osd3358-sm-red.dts";
+		base_dtb_timestamp = __TIMESTAMP__;
+	};
 };
 
 &ldo3_reg {
@@ -33,48 +36,7 @@ &mmc2 {
 	status = "okay";
 };
 
-&lcdc {
-	status = "okay";
-
-	/* If you want to get 24 bit RGB and 16 BGR mode instead of
-	 * current 16 bit RGB and 24 BGR modes, set the propety
-	 * below to "crossed" and uncomment the video-ports -property
-	 * in tda19988 node.
-	 * AM335x errata for wiring:
-	 * https://www.ti.com/lit/er/sprz360i/sprz360i.pdf
-	 */
-
-	blue-and-red-wiring = "straight";
-
-	port {
-		lcdc_0: endpoint {
-			remote-endpoint = <&hdmi_0>;
-		};
-	};
-};
-
 &i2c0 {
-	tda19988: hdmi-encoder@70 {
-		compatible = "nxp,tda998x";
-		reg = <0x70>;
-
-		pinctrl-names = "default", "off";
-		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
-		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
-
-		/* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
-		/* video-ports = <0x234501>; */
-
-		#sound-dai-cells = <0>;
-		audio-ports = <	TDA998x_I2S	0x03>;
-
-		port {
-			hdmi_0: endpoint {
-				remote-endpoint = <&lcdc_0>;
-			};
-		};
-	};
-
 	mpu9250: imu@68 {
 		compatible = "invensense,mpu6050";
 		reg = <0x68>;
@@ -101,51 +63,7 @@ bmp280: pressure@76 {
 	};
 };
 
-&mcasp0 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcasp0_pins>;
-	status = "okay";
-	op-mode = <0>;	/* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 1 0
-		>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
 / {
-	clk_mcasp0_fixed: clk-mcasp0-fixed {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24576000>;
-	};
-
-	clk_mcasp0: clk-mcasp0 {
-		#clock-cells = <0>;
-		compatible = "gpio-gate-clock";
-		clocks = <&clk_mcasp0_fixed>;
-		enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "TI BeagleBone Black";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink0_master>;
-		simple-audio-card,frame-master = <&dailink0_master>;
-
-		dailink0_master: simple-audio-card,cpu {
-			sound-dai = <&mcasp0>;
-			clocks = <&clk_mcasp0>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&tda19988>;
-		};
-	};
-
 	chosen {
 		stdout-path = &uart0;
 	};
@@ -194,51 +112,6 @@ vmmcsd_fixed: fixedregulator0 {
 };
 
 &am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&clkout2_pin>;
-
-	nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
-		>;
-	};
-
-	mcasp0_pins: mcasp0-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
-		>;
-	};
-
 	flash_enable: flash-enable {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* rmii1_ref_clk.gpio0_29 */
@@ -280,12 +153,6 @@ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	clkout2_pin: pinmux-clkout2-pin {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-		>;
-	};
-
 	cpsw_default: cpsw-default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
@@ -372,6 +239,7 @@ &uart0 {
 	pinctrl-0 = <&uart0_pins>;
 
 	status = "okay";
+	symlink = "bone/uart/0";
 };
 
 &usb0 {
@@ -389,6 +257,7 @@ &i2c2 {
 	pinctrl-0 = <&i2c2_pins>;
 	status = "okay";
 	clock-frequency = <100000>;
+	symlink = "bone/i2c/2";
 };
 
 &cpsw_port1 {
diff --git a/arch/arm/boot/dts/am335x-osd335x-common.dtsi b/arch/arm/boot/dts/am335x-osd335x-common.dtsi
index 2888b1599..49ba87eda 100644
--- a/arch/arm/boot/dts/am335x-osd335x-common.dtsi
+++ b/arch/arm/boot/dts/am335x-osd335x-common.dtsi
@@ -48,6 +48,7 @@ &i2c0 {
 
 	status = "okay";
 	clock-frequency = <400000>;
+	symlink = "bone/i2c/0";
 
 	tps: tps@24 {
 		reg = <0x24>;
diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts
index 5e415d8ff..62f6fafc3 100644
--- a/arch/arm/boot/dts/am335x-pocketbeagle.dts
+++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts
@@ -15,6 +15,8 @@ / {
 
 	chosen {
 		stdout-path = &uart0;
+		base_dtb = "am335x-pocketbeagle.dts";
+		base_dtb_timestamp = __TIMESTAMP__;
 	};
 
 	leds {
@@ -204,150 +206,24 @@ &gpio3 {
 };
 
 &am33xx_pinmux {
+//	i2c2_pins: pinmux-i2c2-pins {
+//		pinctrl-single,pins = <
+//			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* (D17) uart1_rtsn.I2C2_SCL */
+//			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* (D18) uart1_ctsn.I2C2_SDA */
+//		>;
+//	};
 
-	compatible = "pinconf-single";
-	pinctrl-names = "default";
-
-	pinctrl-0 =   < &P2_03_gpio &P1_34_gpio &P2_19_gpio &P2_24_gpio
-			&P2_33_gpio &P2_22_gpio &P2_18_gpio &P2_10_gpio
-			&P2_06_gpio &P2_04_gpio &P2_02_gpio &P2_08_gpio
-			&P2_17_gpio >;
-
-	/* P2_03 (ZCZ ball T10) gpio0_23 0x824 PIN 9 */
-	P2_03_gpio: pinmux_P2_03_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
-	};
-
-	/* P1_34 (ZCZ ball T11) gpio0_26 0x828 PIN 10 */
-	P1_34_gpio: pinmux_P1_34_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
-	};
-
-	/* P2_19 (ZCZ ball U12) gpio0_27 0x82c PIN 11 */
-	P2_19_gpio: pinmux_P2_19_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
-	};
-
-	/* P2_24 (ZCZ ball T12) gpio1_12 0x830 PIN 12 */
-	P2_24_gpio: pinmux_P2_24_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
-	};
-
-	/* P2_33 (ZCZ ball R12) gpio1_13 0x834 PIN 13 */
-	P2_33_gpio: pinmux_P2_33_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
-	};
-
-	/* P2_22 (ZCZ ball V13) gpio1_14 0x838 PIN 14 */
-	P2_22_gpio: pinmux_P2_22_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
-	};
-
-	/* P2_18 (ZCZ ball U13) gpio1_15 0x83c PIN 15 */
-	P2_18_gpio: pinmux_P2_18_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
-	};
-
-	/* P2_10 (ZCZ ball R14) gpio1_20 0x850 PIN 20 */
-	P2_10_gpio: pinmux_P2_10_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
-	};
-
-	/* P2_06 (ZCZ ball U16) gpio1_25 0x864 PIN 25 */
-	P2_06_gpio: pinmux_P2_06_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
-	};
-
-	/* P2_04 (ZCZ ball T16) gpio1_26 0x868 PIN 26 */
-	P2_04_gpio: pinmux_P2_04_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
-	};
-
-	/* P2_02 (ZCZ ball V17) gpio1_27 0x86c PIN 27 */
-	P2_02_gpio: pinmux_P2_02_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
-	};
-
-	/* P2_08 (ZCZ ball U18) gpio1_28 0x878 PIN 30 */
-	P2_08_gpio: pinmux_P2_08_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x00  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x00  0x00  0x10  0x18>;
-	};
-
-	/* P2_17 (ZCZ ball V12) gpio2_1 0x88c PIN 35 */
-	P2_17_gpio: pinmux_P2_17_gpio {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
-		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
-	};
-
-	i2c2_pins: pinmux-i2c2-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* (D17) uart1_rtsn.I2C2_SCL */
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* (D18) uart1_ctsn.I2C2_SDA */
-		>;
-	};
+//	ehrpwm0_pins: pinmux-ehrpwm0-pins {
+//		pinctrl-single,pins = <
+//			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* (A13) mcasp0_aclkx.ehrpwm0A */
+//		>;
+//	};
 
-	ehrpwm0_pins: pinmux-ehrpwm0-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* (A13) mcasp0_aclkx.ehrpwm0A */
-		>;
-	};
-
-	ehrpwm1_pins: pinmux-ehrpwm1-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE6)	/* (U14) gpmc_a2.ehrpwm1A */
-		>;
-	};
+//	ehrpwm1_pins: pinmux-ehrpwm1-pins {
+//		pinctrl-single,pins = <
+//			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE6)	/* (U14) gpmc_a2.ehrpwm1A */
+//		>;
+//	};
 
 	mmc0_pins: pinmux-mmc0-pins {
 		pinctrl-single,pins = <
@@ -361,23 +237,23 @@ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 
-	spi0_pins: pinmux-spi0-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
+//	spi0_pins: pinmux-spi0-pins {
+//		pinctrl-single,pins = <
+//			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)	/* (A17) spi0_sclk.spi0_sclk */
+//			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)	/* (B17) spi0_d0.spi0_d0 */
+//			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)	/* (B16) spi0_d1.spi0_d1 */
+//			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)	/* (A16) spi0_cs0.spi0_cs0 */
+//		>;
+//	};
 
-	spi1_pins: pinmux-spi1-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE4)	/* (C18) eCAP0_in_PWM0_out.spi1_sclk */
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE4)	/* (E18) uart0_ctsn.spi1_d0 */
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE4)	/* (E17) uart0_rtsn.spi1_d1 */
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_INPUT_PULLUP, MUX_MODE4)	/* (A15) xdma_event_intr0.spi1_cs1 */
-		>;
-	};
+//	spi1_pins: pinmux-spi1-pins {
+//		pinctrl-single,pins = <
+//			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE4)	/* (C18) eCAP0_in_PWM0_out.spi1_sclk */
+//			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE4)	/* (E18) uart0_ctsn.spi1_d0 */
+//			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE4)	/* (E17) uart0_rtsn.spi1_d1 */
+//			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_INPUT_PULLUP, MUX_MODE4)	/* (A15) xdma_event_intr0.spi1_cs1 */
+//		>;
+//	};
 
 	usr_leds_pins: pinmux-usr-leds-pins {
 		pinctrl-single,pins = <
@@ -395,12 +271,839 @@ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	uart4_pins: pinmux-uart4-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6)	/* (T17) gpmc_wait0.uart4_rxd */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLDOWN, MUX_MODE6)	/* (U17) gpmc_wpn.uart4_txd */
-		>;
-	};
+//	uart4_pins: pinmux-uart4-pins {
+//		pinctrl-single,pins = <
+//			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6)	/* (T17) gpmc_wait0.uart4_rxd */
+//			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLDOWN, MUX_MODE6)	/* (U17) gpmc_wpn.uart4_txd */
+//		>;
+//	};
+
+	/************************/
+	/* P1 Header */
+	/************************/
+
+	/* P1_01                VIN-AC */
+
+	/* P1_02 (ZCZ ball R5) gpio2_23 */
+	P1_02_default_pin: pinmux_P1_02_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e4, PIN_INPUT | MUX_MODE7) >; };			/* lcd_hsync.gpio2_23 */
+	P1_02_gpio_pin: pinmux_P1_02_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_hsync.gpio2_23 */
+	P1_02_gpio_pu_pin: pinmux_P1_02_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_hsync.gpio2_23 */
+	P1_02_gpio_pd_pin: pinmux_P1_02_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_hsync.gpio2_23 */
+	P1_02_gpio_input_pin: pinmux_P1_02_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e4, PIN_INPUT | MUX_MODE7) >; };			/* lcd_hsync.gpio2_23 */
+	P1_02_pruout_pin: pinmux_P1_02_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_hsync.pru1_out9 */
+	P1_02_pruin_pin: pinmux_P1_02_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e4, PIN_INPUT | MUX_MODE6) >; };			/* lcd_hsync.pru1_in9 */
+
+	/* P1_03 (ZCZ ball F15)  usb1_vbus_out         */
+
+	/* P1_04 (ZCZ ball R6) gpio2_25 */
+	P1_04_default_pin: pinmux_P1_04_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_ac_bias_en.gpio2_25 */
+	P1_04_gpio_pin: pinmux_P1_04_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ec, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_ac_bias_en.gpio2_25 */
+	P1_04_gpio_pu_pin: pinmux_P1_04_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_ac_bias_en.gpio2_25 */
+	P1_04_gpio_pd_pin: pinmux_P1_04_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_ac_bias_en.gpio2_25 */
+	P1_04_gpio_input_pin: pinmux_P1_04_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ec, PIN_INPUT | MUX_MODE7) >; };			/* lcd_ac_bias_en.gpio2_25 */
+	P1_04_pruout_pin: pinmux_P1_04_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ec, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_ac_bias_en.pru1_out11 */
+	P1_04_pruin_pin: pinmux_P1_04_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08ec, PIN_INPUT | MUX_MODE6) >; };			/* lcd_ac_bias_en.pru1_in11 */
+
+	/* P1_05 (ZCZ ball T18)  usb1_vbus_in         */
+
+	/* P1_06 (ZCZ ball A16) spi0_cs0 */
+	P1_06_default_pin: pinmux_P1_06_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* spi0_cs0.spi0_cs0 */
+	P1_06_gpio_pin: pinmux_P1_06_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* spi0_cs0.gpio0_5 */
+	P1_06_gpio_pu_pin: pinmux_P1_06_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* spi0_cs0.gpio0_5 */
+	P1_06_gpio_pd_pin: pinmux_P1_06_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* spi0_cs0.gpio0_5 */
+	P1_06_gpio_input_pin: pinmux_P1_06_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_INPUT | MUX_MODE7) >; };			/* spi0_cs0.gpio0_5 */
+	P1_06_spi_cs_pin: pinmux_P1_06_spi_cs_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* spi0_cs0.spi0_cs0 */
+	P1_06_i2c_pin: pinmux_P1_06_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* spi0_cs0.i2c1_scl */
+	P1_06_pwm_pin: pinmux_P1_06_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; };	/* spi0_cs0.ehrpwm0_synci */
+	P1_06_pru_uart_pin: pinmux_P1_06_pru_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x095c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* spi0_cs0.pr1_uart0_txd */
+
+	/* P1_07                VIN-USB */
+
+	/* P1_08 (ZCZ ball A17) spi0_sclk */
+	P1_08_default_pin: pinmux_P1_08_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* spi0_sclk.spi0_sclk */
+	P1_08_gpio_pin: pinmux_P1_08_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* spi0_sclk.gpio0_2 */
+	P1_08_gpio_pu_pin: pinmux_P1_08_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* spi0_sclk.gpio0_2 */
+	P1_08_gpio_pd_pin: pinmux_P1_08_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* spi0_sclk.gpio0_2 */
+	P1_08_gpio_input_pin: pinmux_P1_08_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_INPUT | MUX_MODE7) >; };			/* spi0_sclk.gpio0_2 */
+	P1_08_spi_sclk_pin: pinmux_P1_08_spi_sclk_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* spi0_sclk.spi0_sclk */
+	P1_08_uart_pin: pinmux_P1_08_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* spi0_sclk.uart2_rxd */
+	P1_08_i2c_pin: pinmux_P1_08_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* spi0_sclk.i2c2_sda */
+	P1_08_pwm_pin: pinmux_P1_08_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; };	/* spi0_sclk.ehrpwm0a */
+	P1_08_pru_uart_pin: pinmux_P1_08_pru_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0950, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* spi0_sclk.pr1_uart0_cts_n */
+
+	/* P1_09 (ZCZ ball R18)  USB1-DN         */
+
+	/* P1_10 (ZCZ ball B17) spi0_d0 */
+	P1_10_default_pin: pinmux_P1_10_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* spi0_d0.spi0_d0 */
+	P1_10_gpio_pin: pinmux_P1_10_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* spi0_d0.gpio0_3 */
+	P1_10_gpio_pu_pin: pinmux_P1_10_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* spi0_d0.gpio0_3 */
+	P1_10_gpio_pd_pin: pinmux_P1_10_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* spi0_d0.gpio0_3 */
+	P1_10_gpio_input_pin: pinmux_P1_10_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_INPUT | MUX_MODE7) >; };			/* spi0_d0.gpio0_3 */
+	P1_10_spi_pin: pinmux_P1_10_spi_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* spi0_d0.spi0_d0 */
+	P1_10_uart_pin: pinmux_P1_10_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* spi0_d0.uart2_txd */
+	P1_10_i2c_pin: pinmux_P1_10_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* spi0_d0.i2c2_scl */
+	P1_10_pwm_pin: pinmux_P1_10_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; };	/* spi0_d0.ehrpwm0b */
+	P1_10_pru_uart_pin: pinmux_P1_10_pru_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0954, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* spi0_d0.pr1_uart0_rts_n */
+
+	/* P1_11 (ZCZ ball R17)  USB1-DP         */
+
+	/* P1_12 (ZCZ ball B16) spi0_d1 */
+	P1_12_default_pin: pinmux_P1_12_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* spi0_d1.spi0_d1 */
+	P1_12_gpio_pin: pinmux_P1_12_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* spi0_d1.gpio0_4 */
+	P1_12_gpio_pu_pin: pinmux_P1_12_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* spi0_d1.gpio0_4 */
+	P1_12_gpio_pd_pin: pinmux_P1_12_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* spi0_d1.gpio0_4 */
+	P1_12_gpio_input_pin: pinmux_P1_12_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_INPUT | MUX_MODE7) >; };			/* spi0_d1.gpio0_4 */
+	P1_12_spi_pin: pinmux_P1_12_spi_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* spi0_d1.spi0_d1 */
+	P1_12_i2c_pin: pinmux_P1_12_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* spi0_d1.i2c1_sda */
+	P1_12_pwm_pin: pinmux_P1_12_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; };	/* spi0_d1.ehrpwm0_tripzone_input */
+	P1_12_pru_uart_pin: pinmux_P1_12_pru_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0958, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* spi0_d1.pr1_uart0_rxd */
+
+	/* P1_13 (ZCZ ball P17)  USB1-ID         */
+
+	/* P1_14                VOUT-3.3V */
+
+	/* P1_15                GND */
+
+	/* P1_16                GND */
+
+	/* P1_17 (ZCZ ball A9)  VREFN         */
+
+	/* P1_18 (ZCZ ball B9)  VREFP         */
+
+	/* P1_19 (ZCZ ball B6)  AIN0         */
+
+	/* P1_20 (ZCZ ball D14) gpio0_20 */
+	P1_20_default_pin: pinmux_P1_20_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* xdma_event_intr1.gpio0_20 */
+	P1_20_gpio_pin: pinmux_P1_20_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* xdma_event_intr1.gpio0_20 */
+	P1_20_gpio_pu_pin: pinmux_P1_20_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* xdma_event_intr1.gpio0_20 */
+	P1_20_gpio_pd_pin: pinmux_P1_20_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* xdma_event_intr1.gpio0_20 */
+	P1_20_gpio_input_pin: pinmux_P1_20_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b4, PIN_INPUT | MUX_MODE7) >; };			/* xdma_event_intr1.gpio0_20 */
+	P1_20_pruin_pin: pinmux_P1_20_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b4, PIN_INPUT | MUX_MODE5) >; };			/* xdma_event_intr1.pru0_in16 */
+
+	/* P1_21 (ZCZ ball C7)  AIN1         */
+
+	/* P1_22                GND */
+
+	/* P1_23 (ZCZ ball B7)  AIN2         */
+
+	/* P1_24                VOUT-5V */
+
+	/* P1_25 (ZCZ ball A7)  AIN3         */
+
+	/* P1_26 (ZCZ ball D18) i2c2_sda */
+	P1_26_default_pin: pinmux_P1_26_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* uart1_ctsn.i2c2_sda */
+	P1_26_gpio_pin: pinmux_P1_26_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* uart1_ctsn.gpio0_12 */
+	P1_26_gpio_pu_pin: pinmux_P1_26_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* uart1_ctsn.gpio0_12 */
+	P1_26_gpio_pd_pin: pinmux_P1_26_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* uart1_ctsn.gpio0_12 */
+	P1_26_gpio_input_pin: pinmux_P1_26_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_INPUT | MUX_MODE7) >; };			/* uart1_ctsn.gpio0_12 */
+	P1_26_can_pin: pinmux_P1_26_can_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | MUX_MODE2) >; };		/* uart1_ctsn.dcan0_tx */
+	P1_26_i2c_pin: pinmux_P1_26_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* uart1_ctsn.i2c2_sda */
+	P1_26_spi_cs_pin: pinmux_P1_26_spi_cs_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* uart1_ctsn.spi1_cs0 */
+	P1_26_pru_uart_pin: pinmux_P1_26_pru_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; };	/* uart1_ctsn.pr1_uart0_cts_n */
+
+	/* P1_27 (ZCZ ball C8)  AIN4         */
+
+	/* P1_28 (ZCZ ball D17) i2c2_scl */
+	P1_28_default_pin: pinmux_P1_28_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* uart1_rtsn.i2c2_scl */
+	P1_28_gpio_pin: pinmux_P1_28_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* uart1_rtsn.gpio0_13 */
+	P1_28_gpio_pu_pin: pinmux_P1_28_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* uart1_rtsn.gpio0_13 */
+	P1_28_gpio_pd_pin: pinmux_P1_28_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* uart1_rtsn.gpio0_13 */
+	P1_28_gpio_input_pin: pinmux_P1_28_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_INPUT | MUX_MODE7) >; };			/* uart1_rtsn.gpio0_13 */
+	P1_28_can_pin: pinmux_P1_28_can_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_INPUT_PULLUP | MUX_MODE2) >; };		/* uart1_rtsn.dcan0_rx */
+	P1_28_i2c_pin: pinmux_P1_28_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* uart1_rtsn.i2c2_scl */
+	P1_28_spi_cs_pin: pinmux_P1_28_spi_cs_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* uart1_rtsn.spi1_cs1 */
+	P1_28_pru_uart_pin: pinmux_P1_28_pru_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; };	/* uart1_rtsn.pr1_uart0_rts_n */
+
+	/* P1_29 (ZCZ ball A14) pru0_in7 */
+	P1_29_default_pin: pinmux_P1_29_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09ac, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_ahclkx.pru0_in7 */
+	P1_29_gpio_pin: pinmux_P1_29_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09ac, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* mcasp0_ahclkx.gpio3_21 */
+	P1_29_gpio_pu_pin: pinmux_P1_29_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_ahclkx.gpio3_21 */
+	P1_29_gpio_pd_pin: pinmux_P1_29_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_ahclkx.gpio3_21 */
+	P1_29_gpio_input_pin: pinmux_P1_29_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09ac, PIN_INPUT | MUX_MODE7) >; };			/* mcasp0_ahclkx.gpio3_21 */
+	P1_29_qep_pin: pinmux_P1_29_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* mcasp0_ahclkx.eqep0_strobe */
+	P1_29_pruout_pin: pinmux_P1_29_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09ac, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* mcasp0_ahclkx.pru0_out7 */
+	P1_29_pruin_pin: pinmux_P1_29_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09ac, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_ahclkx.pru0_in7 */
+
+	/* P1_30 (ZCZ ball E16) uart0_txd */
+	P1_30_default_pin: pinmux_P1_30_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0974, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* uart0_txd.uart0_txd */
+	P1_30_gpio_pin: pinmux_P1_30_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0974, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* uart0_txd.gpio1_11 */
+	P1_30_gpio_pu_pin: pinmux_P1_30_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0974, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* uart0_txd.gpio1_11 */
+	P1_30_gpio_pd_pin: pinmux_P1_30_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0974, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* uart0_txd.gpio1_11 */
+	P1_30_gpio_input_pin: pinmux_P1_30_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0974, PIN_INPUT | MUX_MODE7) >; };			/* uart0_txd.gpio1_11 */
+	P1_30_uart_pin: pinmux_P1_30_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0974, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* uart0_txd.uart0_txd */
+	P1_30_spi_cs_pin: pinmux_P1_30_spi_cs_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0974, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* uart0_txd.spi1_cs1 */
+	P1_30_can_pin: pinmux_P1_30_can_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0974, PIN_INPUT_PULLUP | MUX_MODE2) >; };		/* uart0_txd.dcan0_rx */
+	P1_30_i2c_pin: pinmux_P1_30_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0974, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* uart0_txd.i2c2_scl */
+	P1_30_pruout_pin: pinmux_P1_30_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0974, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* uart0_txd.pru1_out15 */
+	P1_30_pruin_pin: pinmux_P1_30_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0974, PIN_INPUT | MUX_MODE6) >; };			/* uart0_txd.pru1_in15 */
+
+	/* P1_31 (ZCZ ball B12) pru0_in4 */
+	P1_31_default_pin: pinmux_P1_31_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a0, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_aclkr.pru0_in4 */
+	P1_31_gpio_pin: pinmux_P1_31_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* mcasp0_aclkr.gpio3_18 */
+	P1_31_gpio_pu_pin: pinmux_P1_31_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_aclkr.gpio3_18 */
+	P1_31_gpio_pd_pin: pinmux_P1_31_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_aclkr.gpio3_18 */
+	P1_31_gpio_input_pin: pinmux_P1_31_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a0, PIN_INPUT | MUX_MODE7) >; };			/* mcasp0_aclkr.gpio3_18 */
+	P1_31_qep_pin: pinmux_P1_31_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* mcasp0_aclkr.eqep0a_in */
+	P1_31_pruout_pin: pinmux_P1_31_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* mcasp0_aclkr.pru0_out4 */
+	P1_31_pruin_pin: pinmux_P1_31_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a0, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_aclkr.pru0_in4 */
+
+	/* P1_32 (ZCZ ball E15) uart0_rxd */
+	P1_32_default_pin: pinmux_P1_32_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0970, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* uart0_rxd.uart0_rxd */
+	P1_32_gpio_pin: pinmux_P1_32_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0970, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* uart0_rxd.gpio1_10 */
+	P1_32_gpio_pu_pin: pinmux_P1_32_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0970, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* uart0_rxd.gpio1_10 */
+	P1_32_gpio_pd_pin: pinmux_P1_32_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0970, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* uart0_rxd.gpio1_10 */
+	P1_32_gpio_input_pin: pinmux_P1_32_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0970, PIN_INPUT | MUX_MODE7) >; };			/* uart0_rxd.gpio1_10 */
+	P1_32_uart_pin: pinmux_P1_32_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0970, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* uart0_rxd.uart0_rxd */
+	P1_32_spi_cs_pin: pinmux_P1_32_spi_cs_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0970, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* uart0_rxd.spi1_cs0 */
+	P1_32_can_pin: pinmux_P1_32_can_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0970, PIN_OUTPUT_PULLUP | MUX_MODE2) >; };		/* uart0_rxd.dcan0_tx */
+	P1_32_i2c_pin: pinmux_P1_32_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0970, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* uart0_rxd.i2c2_sda */
+	P1_32_pruout_pin: pinmux_P1_32_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0970, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* uart0_rxd.pru1_out14 */
+	P1_32_pruin_pin: pinmux_P1_32_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0970, PIN_INPUT | MUX_MODE6) >; };			/* uart0_rxd.pru1_in14 */
+
+	/* P1_33 (ZCZ ball B13) pru0_in1 */
+	P1_33_default_pin: pinmux_P1_33_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_fsx.pru0_in1 */
+	P1_33_gpio_pin: pinmux_P1_33_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* mcasp0_fsx.gpio3_15 */
+	P1_33_gpio_pu_pin: pinmux_P1_33_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_fsx.gpio3_15 */
+	P1_33_gpio_pd_pin: pinmux_P1_33_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_fsx.gpio3_15 */
+	P1_33_gpio_input_pin: pinmux_P1_33_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_INPUT | MUX_MODE7) >; };			/* mcasp0_fsx.gpio3_15 */
+	P1_33_pwm_pin: pinmux_P1_33_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; };	/* mcasp0_fsx.ehrpwm0b */
+	P1_33_spi_pin: pinmux_P1_33_spi_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* mcasp0_fsx.spi1_d0 */
+	P1_33_pruout_pin: pinmux_P1_33_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* mcasp0_fsx.pru0_out1 */
+	P1_33_pruin_pin: pinmux_P1_33_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0994, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_fsx.pru0_in1 */
+
+	/* P1_34 (ZCZ ball T11) gpio0_26 */
+	P1_34_default_pin: pinmux_P1_34_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0828, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad10.gpio0_26 */
+	P1_34_gpio_pin: pinmux_P1_34_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0828, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad10.gpio0_26 */
+	P1_34_gpio_pu_pin: pinmux_P1_34_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0828, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad10.gpio0_26 */
+	P1_34_gpio_pd_pin: pinmux_P1_34_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0828, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad10.gpio0_26 */
+	P1_34_gpio_input_pin: pinmux_P1_34_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0828, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad10.gpio0_26 */
+	P1_34_pwm_pin: pinmux_P1_34_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0828, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; };	/* gpmc_ad10.ehrpwm2_tripzone_input */
+
+	/* P1_35 (ZCZ ball V5) pru1_in10 */
+	P1_35_default_pin: pinmux_P1_35_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e8, PIN_INPUT | MUX_MODE6) >; };			/* lcd_pclk.pru1_in10 */
+	P1_35_gpio_pin: pinmux_P1_35_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_pclk.gpio2_24 */
+	P1_35_gpio_pu_pin: pinmux_P1_35_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_pclk.gpio2_24 */
+	P1_35_gpio_pd_pin: pinmux_P1_35_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_pclk.gpio2_24 */
+	P1_35_gpio_input_pin: pinmux_P1_35_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e8, PIN_INPUT | MUX_MODE7) >; };			/* lcd_pclk.gpio2_24 */
+	P1_35_pruout_pin: pinmux_P1_35_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_pclk.pru1_out10 */
+	P1_35_pruin_pin: pinmux_P1_35_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e8, PIN_INPUT | MUX_MODE6) >; };			/* lcd_pclk.pru1_in10 */
+
+	/* P1_36 (ZCZ ball A13) ehrpwm0a */
+	P1_36_default_pin: pinmux_P1_36_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; };	/* mcasp0_aclkx.ehrpwm0a */
+	P1_36_gpio_pin: pinmux_P1_36_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* mcasp0_aclkx.gpio3_14 */
+	P1_36_gpio_pu_pin: pinmux_P1_36_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_aclkx.gpio3_14 */
+	P1_36_gpio_pd_pin: pinmux_P1_36_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_aclkx.gpio3_14 */
+	P1_36_gpio_input_pin: pinmux_P1_36_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_INPUT | MUX_MODE7) >; };			/* mcasp0_aclkx.gpio3_14 */
+	P1_36_pwm_pin: pinmux_P1_36_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; };	/* mcasp0_aclkx.ehrpwm0a */
+	P1_36_spi_sclk_pin: pinmux_P1_36_spi_sclk_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* mcasp0_aclkx.spi1_sclk */
+	P1_36_pruout_pin: pinmux_P1_36_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* mcasp0_aclkx.pru0_out0 */
+	P1_36_pruin_pin: pinmux_P1_36_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0990, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_aclkx.pru0_in0 */
+
+
+	/************************/
+	/* P2 Header */
+	/************************/
+
+	/* P2_01 (ZCZ ball U14) ehrpwm1a */
+	P2_01_default_pin: pinmux_P2_01_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; };	/* gpmc_a2.ehrpwm1a */
+	P2_01_gpio_pin: pinmux_P2_01_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0848, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_a2.gpio1_18 */
+	P2_01_gpio_pu_pin: pinmux_P2_01_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a2.gpio1_18 */
+	P2_01_gpio_pd_pin: pinmux_P2_01_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a2.gpio1_18 */
+	P2_01_gpio_input_pin: pinmux_P2_01_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0848, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_a2.gpio1_18 */
+	P2_01_pwm_pin: pinmux_P2_01_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0848, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; };	/* gpmc_a2.ehrpwm1a */
+
+	/* P2_02 (ZCZ ball V17) gpio1_27 */
+	P2_02_default_pin: pinmux_P2_02_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x086c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a11.gpio1_27 */
+	P2_02_gpio_pin: pinmux_P2_02_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x086c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_a11.gpio1_27 */
+	P2_02_gpio_pu_pin: pinmux_P2_02_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x086c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a11.gpio1_27 */
+	P2_02_gpio_pd_pin: pinmux_P2_02_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x086c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a11.gpio1_27 */
+	P2_02_gpio_input_pin: pinmux_P2_02_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x086c, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_a11.gpio1_27 */
+
+	/* P2_03 (ZCZ ball T10) gpio0_23 */
+	P2_03_default_pin: pinmux_P2_03_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad9.gpio0_23 */
+	P2_03_gpio_pin: pinmux_P2_03_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0824, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad9.gpio0_23 */
+	P2_03_gpio_pu_pin: pinmux_P2_03_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad9.gpio0_23 */
+	P2_03_gpio_pd_pin: pinmux_P2_03_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad9.gpio0_23 */
+	P2_03_gpio_input_pin: pinmux_P2_03_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0824, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad9.gpio0_23 */
+	P2_03_pwm_pin: pinmux_P2_03_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0824, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; };	/* gpmc_ad9.ehrpwm2b */
+
+	/* P2_04 (ZCZ ball T16) gpio1_26 */
+	P2_04_default_pin: pinmux_P2_04_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0868, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a10.gpio1_26 */
+	P2_04_gpio_pin: pinmux_P2_04_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0868, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_a10.gpio1_26 */
+	P2_04_gpio_pu_pin: pinmux_P2_04_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0868, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a10.gpio1_26 */
+	P2_04_gpio_pd_pin: pinmux_P2_04_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0868, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a10.gpio1_26 */
+	P2_04_gpio_input_pin: pinmux_P2_04_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0868, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_a10.gpio1_26 */
+
+	/* P2_05 (ZCZ ball T17) uart4_rxd */
+	P2_05_default_pin: pinmux_P2_05_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; };	/* gpmc_wait0.uart4_rxd */
+	P2_05_gpio_pin: pinmux_P2_05_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0870, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_wait0.gpio0_30 */
+	P2_05_gpio_pu_pin: pinmux_P2_05_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_wait0.gpio0_30 */
+	P2_05_gpio_pd_pin: pinmux_P2_05_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_wait0.gpio0_30 */
+	P2_05_gpio_input_pin: pinmux_P2_05_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0870, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_wait0.gpio0_30 */
+	P2_05_uart_pin: pinmux_P2_05_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0870, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; };	/* gpmc_wait0.uart4_rxd */
+
+	/* P2_06 (ZCZ ball U16) gpio1_25 */
+	P2_06_default_pin: pinmux_P2_06_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0864, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a9.gpio1_25 */
+	P2_06_gpio_pin: pinmux_P2_06_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0864, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_a9.gpio1_25 */
+	P2_06_gpio_pu_pin: pinmux_P2_06_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0864, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a9.gpio1_25 */
+	P2_06_gpio_pd_pin: pinmux_P2_06_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0864, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a9.gpio1_25 */
+	P2_06_gpio_input_pin: pinmux_P2_06_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0864, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_a9.gpio1_25 */
+
+	/* P2_07 (ZCZ ball U17) uart4_txd */
+	P2_07_default_pin: pinmux_P2_07_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; };	/* gpmc_wpn.uart4_txd */
+	P2_07_gpio_pin: pinmux_P2_07_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0874, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_wpn.gpio0_31 */
+	P2_07_gpio_pu_pin: pinmux_P2_07_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_wpn.gpio0_31 */
+	P2_07_gpio_pd_pin: pinmux_P2_07_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_wpn.gpio0_31 */
+	P2_07_gpio_input_pin: pinmux_P2_07_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0874, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_wpn.gpio0_31 */
+	P2_07_uart_pin: pinmux_P2_07_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0874, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; };	/* gpmc_wpn.uart4_txd */
+
+	/* P2_08 (ZCZ ball U18) gpio1_28 */
+	P2_08_default_pin: pinmux_P2_08_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_be1n.gpio1_28 */
+	P2_08_gpio_pin: pinmux_P2_08_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0878, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_be1n.gpio1_28 */
+	P2_08_gpio_pu_pin: pinmux_P2_08_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_be1n.gpio1_28 */
+	P2_08_gpio_pd_pin: pinmux_P2_08_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0878, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_be1n.gpio1_28 */
+	P2_08_gpio_input_pin: pinmux_P2_08_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0878, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_be1n.gpio1_28 */
+
+	/* P2_09 (ZCZ ball D15) i2c1_scl */
+	P2_09_default_pin: pinmux_P2_09_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* uart1_txd.i2c1_scl */
+	P2_09_gpio_pin: pinmux_P2_09_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* uart1_txd.gpio0_15 */
+	P2_09_gpio_pu_pin: pinmux_P2_09_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* uart1_txd.gpio0_15 */
+	P2_09_gpio_pd_pin: pinmux_P2_09_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* uart1_txd.gpio0_15 */
+	P2_09_gpio_input_pin: pinmux_P2_09_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_INPUT | MUX_MODE7) >; };			/* uart1_txd.gpio0_15 */
+	P2_09_uart_pin: pinmux_P2_09_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* uart1_txd.uart1_txd */
+	P2_09_can_pin: pinmux_P2_09_can_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_INPUT_PULLUP | MUX_MODE2) >; };		/* uart1_txd.dcan1_rx */
+	P2_09_i2c_pin: pinmux_P2_09_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* uart1_txd.i2c1_scl */
+	P2_09_pru_uart_pin: pinmux_P2_09_pru_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; };	/* uart1_txd.pr1_uart0_txd */
+	P2_09_pruin_pin: pinmux_P2_09_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0984, PIN_INPUT | MUX_MODE6) >; };			/* uart1_txd.pru0_in16 */
+
+	/* P2_10 (ZCZ ball R14) gpio1_20 */
+	P2_10_default_pin: pinmux_P2_10_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0850, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a4.gpio1_20 */
+	P2_10_gpio_pin: pinmux_P2_10_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0850, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_a4.gpio1_20 */
+	P2_10_gpio_pu_pin: pinmux_P2_10_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0850, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a4.gpio1_20 */
+	P2_10_gpio_pd_pin: pinmux_P2_10_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0850, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_a4.gpio1_20 */
+	P2_10_gpio_input_pin: pinmux_P2_10_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0850, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_a4.gpio1_20 */
+	P2_10_qep_pin: pinmux_P2_10_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0850, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6) >; };	/* gpmc_a4.eqep1a_in */
+
+	/* P2_11 (ZCZ ball D16) i2c1_sda */
+	P2_11_default_pin: pinmux_P2_11_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* uart1_rxd.i2c1_sda */
+	P2_11_gpio_pin: pinmux_P2_11_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* uart1_rxd.gpio0_14 */
+	P2_11_gpio_pu_pin: pinmux_P2_11_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* uart1_rxd.gpio0_14 */
+	P2_11_gpio_pd_pin: pinmux_P2_11_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* uart1_rxd.gpio0_14 */
+	P2_11_gpio_input_pin: pinmux_P2_11_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_INPUT | MUX_MODE7) >; };			/* uart1_rxd.gpio0_14 */
+	P2_11_uart_pin: pinmux_P2_11_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE0) >; };	/* uart1_rxd.uart1_rxd */
+	P2_11_can_pin: pinmux_P2_11_can_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | MUX_MODE2) >; };		/* uart1_rxd.dcan1_tx */
+	P2_11_i2c_pin: pinmux_P2_11_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* uart1_rxd.i2c1_sda */
+	P2_11_pru_uart_pin: pinmux_P2_11_pru_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; };	/* uart1_rxd.pr1_uart0_rxd */
+	P2_11_pruin_pin: pinmux_P2_11_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0980, PIN_INPUT | MUX_MODE6) >; };			/* uart1_rxd.pru1_in16 */
+
+	/* P2_12                POWER_BUTTON */
+
+	/* P2_13                VOUT-5V */
+
+	/* P2_14                BAT-VIN */
+
+	/* P2_15                GND */
+
+	/* P2_16                BAT-TEMP */
+
+	/* P2_17 (ZCZ ball V12) gpio2_1 */
+	P2_17_default_pin: pinmux_P2_17_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_clk.gpio2_1 */
+	P2_17_gpio_pin: pinmux_P2_17_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x088c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_clk.gpio2_1 */
+	P2_17_gpio_pu_pin: pinmux_P2_17_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_clk.gpio2_1 */
+	P2_17_gpio_pd_pin: pinmux_P2_17_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x088c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_clk.gpio2_1 */
+	P2_17_gpio_input_pin: pinmux_P2_17_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x088c, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_clk.gpio2_1 */
+
+	/* P2_18 (ZCZ ball U13) gpio1_15 */
+	P2_18_default_pin: pinmux_P2_18_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad15.gpio1_15 */
+	P2_18_gpio_pin: pinmux_P2_18_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x083c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad15.gpio1_15 */
+	P2_18_gpio_pu_pin: pinmux_P2_18_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad15.gpio1_15 */
+	P2_18_gpio_pd_pin: pinmux_P2_18_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad15.gpio1_15 */
+	P2_18_gpio_input_pin: pinmux_P2_18_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x083c, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad15.gpio1_15 */
+	P2_18_qep_pin: pinmux_P2_18_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* gpmc_ad15.eqep2_strobe */
+	P2_18_pru_ecap_pin: pinmux_P2_18_pru_ecap_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x083c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* gpmc_ad15.pr1_ecap0_ecap_capin_apwm_o */
+	P2_18_pruin_pin: pinmux_P2_18_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x083c, PIN_INPUT | MUX_MODE6) >; };			/* gpmc_ad15.pru0_in15 */
+
+	/* P2_19 (ZCZ ball U12) gpio0_27 */
+	P2_19_default_pin: pinmux_P2_19_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x082c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad11.gpio0_27 */
+	P2_19_gpio_pin: pinmux_P2_19_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x082c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad11.gpio0_27 */
+	P2_19_gpio_pu_pin: pinmux_P2_19_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x082c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad11.gpio0_27 */
+	P2_19_gpio_pd_pin: pinmux_P2_19_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x082c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad11.gpio0_27 */
+	P2_19_gpio_input_pin: pinmux_P2_19_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x082c, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad11.gpio0_27 */
+	P2_19_pwm_pin: pinmux_P2_19_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x082c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE4) >; };	/* gpmc_ad11.ehrpwm0_synco */
+
+	/* P2_20 (ZCZ ball T13) gpio2_0 */
+	P2_20_default_pin: pinmux_P2_20_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0888, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_csn3.gpio2_0 */
+	P2_20_gpio_pin: pinmux_P2_20_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0888, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_csn3.gpio2_0 */
+	P2_20_gpio_pu_pin: pinmux_P2_20_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0888, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_csn3.gpio2_0 */
+	P2_20_gpio_pd_pin: pinmux_P2_20_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0888, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_csn3.gpio2_0 */
+	P2_20_gpio_input_pin: pinmux_P2_20_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0888, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_csn3.gpio2_0 */
+
+	/* P2_21                GND */
+
+	/* P2_22 (ZCZ ball V13) gpio1_14 */
+	P2_22_default_pin: pinmux_P2_22_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad14.gpio1_14 */
+	P2_22_gpio_pin: pinmux_P2_22_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0838, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad14.gpio1_14 */
+	P2_22_gpio_pu_pin: pinmux_P2_22_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad14.gpio1_14 */
+	P2_22_gpio_pd_pin: pinmux_P2_22_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad14.gpio1_14 */
+	P2_22_gpio_input_pin: pinmux_P2_22_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0838, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad14.gpio1_14 */
+	P2_22_qep_pin: pinmux_P2_22_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0838, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* gpmc_ad14.eqep2_index */
+	P2_22_pruin_pin: pinmux_P2_22_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0838, PIN_INPUT | MUX_MODE6) >; };			/* gpmc_ad14.pru0_in14 */
+
+	/* P2_23                VOUT-3.3V */
+
+	/* P2_24 (ZCZ ball T12) gpio1_12 */
+	P2_24_default_pin: pinmux_P2_24_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad12.gpio1_12 */
+	P2_24_gpio_pin: pinmux_P2_24_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0830, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad12.gpio1_12 */
+	P2_24_gpio_pu_pin: pinmux_P2_24_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad12.gpio1_12 */
+	P2_24_gpio_pd_pin: pinmux_P2_24_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad12.gpio1_12 */
+	P2_24_gpio_input_pin: pinmux_P2_24_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0830, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad12.gpio1_12 */
+	P2_24_qep_pin: pinmux_P2_24_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* gpmc_ad12.eqep2a_in */
+	P2_24_pruout_pin: pinmux_P2_24_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0830, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; };	/* gpmc_ad12.pru0_out14 */
+
+	/* P2_25 (ZCZ ball E17) spi1_d1 */
+	P2_25_default_pin: pinmux_P2_25_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* uart0_rtsn.spi1_d1 */
+	P2_25_gpio_pin: pinmux_P2_25_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x096c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* uart0_rtsn.gpio1_9 */
+	P2_25_gpio_pu_pin: pinmux_P2_25_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* uart0_rtsn.gpio1_9 */
+	P2_25_gpio_pd_pin: pinmux_P2_25_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* uart0_rtsn.gpio1_9 */
+	P2_25_gpio_input_pin: pinmux_P2_25_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x096c, PIN_INPUT | MUX_MODE7) >; };			/* uart0_rtsn.gpio1_9 */
+	P2_25_uart_pin: pinmux_P2_25_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* uart0_rtsn.uart4_txd */
+	P2_25_can_pin: pinmux_P2_25_can_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x096c, PIN_INPUT_PULLUP | MUX_MODE2) >; };		/* uart0_rtsn.dcan1_rx */
+	P2_25_i2c_pin: pinmux_P2_25_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* uart0_rtsn.i2c1_scl */
+	P2_25_spi_pin: pinmux_P2_25_spi_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* uart0_rtsn.spi1_d1 */
+	P2_25_spi_cs_pin: pinmux_P2_25_spi_cs_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x096c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; };	/* uart0_rtsn.spi1_cs0 */
+
+	/* P2_26                RESET# */
+
+	/* P2_27 (ZCZ ball E18) spi1_d0 */
+	P2_27_default_pin: pinmux_P2_27_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0968, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* uart0_ctsn.spi1_d0 */
+	P2_27_gpio_pin: pinmux_P2_27_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0968, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* uart0_ctsn.gpio1_8 */
+	P2_27_gpio_pu_pin: pinmux_P2_27_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0968, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* uart0_ctsn.gpio1_8 */
+	P2_27_gpio_pd_pin: pinmux_P2_27_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0968, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* uart0_ctsn.gpio1_8 */
+	P2_27_gpio_input_pin: pinmux_P2_27_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0968, PIN_INPUT | MUX_MODE7) >; };			/* uart0_ctsn.gpio1_8 */
+	P2_27_uart_pin: pinmux_P2_27_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0968, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* uart0_ctsn.uart4_rxd */
+	P2_27_can_pin: pinmux_P2_27_can_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0968, PIN_OUTPUT_PULLUP | MUX_MODE2) >; };		/* uart0_ctsn.dcan1_tx */
+	P2_27_i2c_pin: pinmux_P2_27_i2c_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0968, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* uart0_ctsn.i2c1_sda */
+	P2_27_spi_pin: pinmux_P2_27_spi_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0968, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* uart0_ctsn.spi1_d0 */
+
+	/* P2_28 (ZCZ ball D13) pru0_in6 */
+	P2_28_default_pin: pinmux_P2_28_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a8, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_axr1.pru0_in6 */
+	P2_28_gpio_pin: pinmux_P2_28_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a8, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* mcasp0_axr1.gpio3_20 */
+	P2_28_gpio_pu_pin: pinmux_P2_28_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_axr1.gpio3_20 */
+	P2_28_gpio_pd_pin: pinmux_P2_28_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_axr1.gpio3_20 */
+	P2_28_gpio_input_pin: pinmux_P2_28_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a8, PIN_INPUT | MUX_MODE7) >; };			/* mcasp0_axr1.gpio3_20 */
+	P2_28_qep_pin: pinmux_P2_28_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* mcasp0_axr1.eqep0_index */
+	P2_28_pruout_pin: pinmux_P2_28_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a8, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* mcasp0_axr1.pru0_out6 */
+	P2_28_pruin_pin: pinmux_P2_28_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a8, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_axr1.pru0_in6 */
+
+	/* P2_29 (ZCZ ball C18) spi1_sclk */
+	P2_29_default_pin: pinmux_P2_29_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* eCAP0_in_PWM0_out.spi1_sclk */
+	P2_29_gpio_pin: pinmux_P2_29_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* eCAP0_in_PWM0_out.gpio0_7 */
+	P2_29_gpio_pu_pin: pinmux_P2_29_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* eCAP0_in_PWM0_out.gpio0_7 */
+	P2_29_gpio_pd_pin: pinmux_P2_29_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* eCAP0_in_PWM0_out.gpio0_7 */
+	P2_29_gpio_input_pin: pinmux_P2_29_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_INPUT | MUX_MODE7) >; };			/* eCAP0_in_PWM0_out.gpio0_7 */
+	P2_29_pwm_pin: pinmux_P2_29_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE0) >; };	/* eCAP0_in_PWM0_out.ecap0_in_pwm0_out */
+	P2_29_uart_pin: pinmux_P2_29_uart_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* eCAP0_in_PWM0_out.uart3_txd */
+	P2_29_spi_cs_pin: pinmux_P2_29_spi_cs_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE2) >; };	/* eCAP0_in_PWM0_out.spi1_cs1 */
+	P2_29_pru_ecap_pin: pinmux_P2_29_pru_ecap_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE3) >; };	/* eCAP0_in_PWM0_out.pr1_ecap0_ecap_capin_apwm_o */
+	P2_29_spi_sclk_pin: pinmux_P2_29_spi_sclk_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0964, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* eCAP0_in_PWM0_out.spi1_sclk */
+
+	/* P2_30 (ZCZ ball C12) pru0_in3 */
+	P2_30_default_pin: pinmux_P2_30_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_ahclkr.pru0_in3 */
+	P2_30_gpio_pin: pinmux_P2_30_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* mcasp0_ahclkr.gpio3_17 */
+	P2_30_gpio_pu_pin: pinmux_P2_30_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_ahclkr.gpio3_17 */
+	P2_30_gpio_pd_pin: pinmux_P2_30_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_ahclkr.gpio3_17 */
+	P2_30_gpio_input_pin: pinmux_P2_30_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_INPUT | MUX_MODE7) >; };			/* mcasp0_ahclkr.gpio3_17 */
+	P2_30_pwm_pin: pinmux_P2_30_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; };	/* mcasp0_ahclkr.ehrpwm0_synci */
+	P2_30_spi_cs_pin: pinmux_P2_30_spi_cs_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* mcasp0_ahclkr.spi1_cs0 */
+	P2_30_pruout_pin: pinmux_P2_30_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* mcasp0_ahclkr.pru0_out3 */
+	P2_30_pruin_pin: pinmux_P2_30_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x099c, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_ahclkr.pru0_in3 */
+
+	/* P2_31 (ZCZ ball A15) spi1_cs1 */
+	P2_31_default_pin: pinmux_P2_31_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* xdma_event_intr0.spi1_cs1 */
+	P2_31_gpio_pin: pinmux_P2_31_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* xdma_event_intr0.gpio0_19 */
+	P2_31_gpio_pu_pin: pinmux_P2_31_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* xdma_event_intr0.gpio0_19 */
+	P2_31_gpio_pd_pin: pinmux_P2_31_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* xdma_event_intr0.gpio0_19 */
+	P2_31_gpio_input_pin: pinmux_P2_31_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b0, PIN_INPUT | MUX_MODE7) >; };			/* xdma_event_intr0.gpio0_19 */
+	P2_31_spi_cs_pin: pinmux_P2_31_spi_cs_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* xdma_event_intr0.spi1_cs1 */
+	P2_31_pruin_pin: pinmux_P2_31_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09b0, PIN_INPUT | MUX_MODE5) >; };			/* xdma_event_intr0.pru1_in16 */
+
+	/* P2_32 (ZCZ ball D12) pru0_in2 */
+	P2_32_default_pin: pinmux_P2_32_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0998, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_axr0.pru0_in2 */
+	P2_32_gpio_pin: pinmux_P2_32_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0998, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* mcasp0_axr0.gpio3_16 */
+	P2_32_gpio_pu_pin: pinmux_P2_32_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_axr0.gpio3_16 */
+	P2_32_gpio_pd_pin: pinmux_P2_32_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_axr0.gpio3_16 */
+	P2_32_gpio_input_pin: pinmux_P2_32_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0998, PIN_INPUT | MUX_MODE7) >; };			/* mcasp0_axr0.gpio3_16 */
+	P2_32_pwm_pin: pinmux_P2_32_pwm_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE1) >; };	/* mcasp0_axr0.ehrpwm0_tripzone_input */
+	P2_32_spi_pin: pinmux_P2_32_spi_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; };	/* mcasp0_axr0.spi1_d1 */
+	P2_32_pruout_pin: pinmux_P2_32_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0998, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* mcasp0_axr0.pru0_out2 */
+	P2_32_pruin_pin: pinmux_P2_32_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0998, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_axr0.pru0_in2 */
+
+	/* P2_33 (ZCZ ball R12) gpio1_13 */
+	P2_33_default_pin: pinmux_P2_33_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad13.gpio1_13 */
+	P2_33_gpio_pin: pinmux_P2_33_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0834, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* gpmc_ad13.gpio1_13 */
+	P2_33_gpio_pu_pin: pinmux_P2_33_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad13.gpio1_13 */
+	P2_33_gpio_pd_pin: pinmux_P2_33_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* gpmc_ad13.gpio1_13 */
+	P2_33_gpio_input_pin: pinmux_P2_33_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0834, PIN_INPUT | MUX_MODE7) >; };			/* gpmc_ad13.gpio1_13 */
+	P2_33_qep_pin: pinmux_P2_33_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; };	/* gpmc_ad13.eqep2b_in */
+	P2_33_pruout_pin: pinmux_P2_33_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x0834, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE6) >; };	/* gpmc_ad13.pru0_out15 */
+
+	/* P2_34 (ZCZ ball C13) pru0_in5 */
+	P2_34_default_pin: pinmux_P2_34_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a4, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_fsr.pru0_in5 */
+	P2_34_gpio_pin: pinmux_P2_34_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a4, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* mcasp0_fsr.gpio3_19 */
+	P2_34_gpio_pu_pin: pinmux_P2_34_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_fsr.gpio3_19 */
+	P2_34_gpio_pd_pin: pinmux_P2_34_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* mcasp0_fsr.gpio3_19 */
+	P2_34_gpio_input_pin: pinmux_P2_34_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a4, PIN_INPUT | MUX_MODE7) >; };			/* mcasp0_fsr.gpio3_19 */
+	P2_34_qep_pin: pinmux_P2_34_qep_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; };	/* mcasp0_fsr.eqep0b_in */
+	P2_34_pruout_pin: pinmux_P2_34_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a4, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* mcasp0_fsr.pru0_out5 */
+	P2_34_pruin_pin: pinmux_P2_34_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x09a4, PIN_INPUT | MUX_MODE6) >; };			/* mcasp0_fsr.pru0_in5 */
+
+	/* P2_35 (ZCZ ball U5) gpio2_22 */
+	P2_35_default_pin: pinmux_P2_35_default_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e0, PIN_INPUT | MUX_MODE7) >; };			/* lcd_vsync.gpio2_22 */
+	P2_35_gpio_pin: pinmux_P2_35_gpio_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e0, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; };		/* lcd_vsync.gpio2_22 */
+	P2_35_gpio_pu_pin: pinmux_P2_35_gpio_pu_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; };	/* lcd_vsync.gpio2_22 */
+	P2_35_gpio_pd_pin: pinmux_P2_35_gpio_pd_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; };	/* lcd_vsync.gpio2_22 */
+	P2_35_gpio_input_pin: pinmux_P2_35_gpio_input_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e0, PIN_INPUT | MUX_MODE7) >; };			/* lcd_vsync.gpio2_22 */
+	P2_35_pruout_pin: pinmux_P2_35_pruout_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e0, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE5) >; };	/* lcd_vsync.pru1_out8 */
+	P2_35_pruin_pin: pinmux_P2_35_pruin_pin { pinctrl-single,pins = <
+		AM33XX_IOPAD(0x08e0, PIN_INPUT | MUX_MODE6) >; };			/* lcd_vsync.pru1_in8 */
+
+	/* P2_36 (ZCZ ball C9)  AIN7         */
 };
 
 &epwmss0 {
@@ -410,7 +1113,8 @@ &epwmss0 {
 &ehrpwm0 {
 	status = "okay";
 	pinctrl-names = "default";
-	pinctrl-0 = <&ehrpwm0_pins>;
+	//pinctrl-0 = <&ehrpwm0_pins>;
+	pinctrl-0 = <>;
 };
 
 &epwmss1 {
@@ -420,7 +1124,18 @@ &epwmss1 {
 &ehrpwm1 {
 	status = "okay";
 	pinctrl-names = "default";
-	pinctrl-0 = <&ehrpwm1_pins>;
+	//pinctrl-0 = <&ehrpwm1_pins>;
+	pinctrl-0 = <>;
+};
+
+&epwmss2 {
+	status = "okay";
+};
+
+&ehrpwm2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
 };
 
 &i2c0 {
@@ -430,9 +1145,18 @@ eeprom: eeprom@50 {
 	};
 };
 
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
 &i2c2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
+//	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-0 = <>;
 
 	status = "okay";
 	clock-frequency = <400000>;
@@ -463,14 +1187,30 @@ adc {
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
+	//pinctrl-0 = <&uart0_pins>;
+	pinctrl-0 = <>;
+
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
 
 	status = "okay";
 };
 
 &uart4 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins>;
+	//pinctrl-0 = <&uart4_pins>;
+	pinctrl-0 = <>;
 
 	status = "okay";
 };
@@ -482,3 +1222,1092 @@ &usb0 {
 &usb1 {
 	dr_mode = "host";
 };
+
+&spi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	channel@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "spidev";
+		symlink = "bone/spi/0.0";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+	};
+
+	channel@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "spidev";
+		symlink = "bone/spi/0.1";
+		reg = <1>;
+		spi-max-frequency = <24000000>;
+		status = "disabled";
+	};
+};
+
+&spi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	channel@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "spidev";
+		symlink = "bone/spi/1.0";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+	};
+
+	channel@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "spidev";
+		symlink = "bone/spi/1.1";
+		reg = <1>;
+		spi-max-frequency = <24000000>;
+	};
+};
+
+&dcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&dcan1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&ocp {
+	/************************/
+	/* P1 Header */
+	/************************/
+
+	/* P1_01                VIN-AC */
+
+	/* P1_02 (ZCZ ball R5) gpio_input */
+	P1_02_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin";
+		pinctrl-0 = <&P1_02_default_pin>;
+		pinctrl-1 = <&P1_02_gpio_pin>;
+		pinctrl-2 = <&P1_02_gpio_pu_pin>;
+		pinctrl-3 = <&P1_02_gpio_pd_pin>;
+		pinctrl-4 = <&P1_02_gpio_input_pin>;
+		pinctrl-5 = <&P1_02_pruout_pin>;
+		pinctrl-6 = <&P1_02_pruin_pin>;
+	};
+
+	/* P1_03 (ZCZ ball F15)  usb1_vbus_out         */
+
+	/* P1_04 (ZCZ ball R6) */
+	P1_04_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin";
+		pinctrl-0 = <&P1_04_default_pin>;
+		pinctrl-1 = <&P1_04_gpio_pin>;
+		pinctrl-2 = <&P1_04_gpio_pu_pin>;
+		pinctrl-3 = <&P1_04_gpio_pd_pin>;
+		pinctrl-4 = <&P1_04_gpio_input_pin>;
+		pinctrl-5 = <&P1_04_pruout_pin>;
+		pinctrl-6 = <&P1_04_pruin_pin>;
+	};
+
+	/* P1_05 (ZCZ ball T18)  usb1_vbus_in         */
+
+	/* P1_06 (ZCZ ball A16) spi_cs */
+	P1_06_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "i2c", "pwm", "pru_uart";
+		pinctrl-0 = <&P1_06_default_pin>;
+		pinctrl-1 = <&P1_06_gpio_pin>;
+		pinctrl-2 = <&P1_06_gpio_pu_pin>;
+		pinctrl-3 = <&P1_06_gpio_pd_pin>;
+		pinctrl-4 = <&P1_06_gpio_input_pin>;
+		pinctrl-5 = <&P1_06_spi_cs_pin>;
+		pinctrl-6 = <&P1_06_i2c_pin>;
+		pinctrl-7 = <&P1_06_pwm_pin>;
+		pinctrl-8 = <&P1_06_pru_uart_pin>;
+	};
+
+	/* P1_07                VIN-USB */
+
+	/* P1_08 (ZCZ ball A17) spi_sclk */
+	P1_08_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_sclk", "uart", "i2c", "pwm", "pru_uart";
+		pinctrl-0 = <&P1_08_default_pin>;
+		pinctrl-1 = <&P1_08_gpio_pin>;
+		pinctrl-2 = <&P1_08_gpio_pu_pin>;
+		pinctrl-3 = <&P1_08_gpio_pd_pin>;
+		pinctrl-4 = <&P1_08_gpio_input_pin>;
+		pinctrl-5 = <&P1_08_spi_sclk_pin>;
+		pinctrl-6 = <&P1_08_uart_pin>;
+		pinctrl-7 = <&P1_08_i2c_pin>;
+		pinctrl-8 = <&P1_08_pwm_pin>;
+		pinctrl-9 = <&P1_08_pru_uart_pin>;
+	};
+
+	/* P1_09 (ZCZ ball R18)  USB1-DN         */
+
+	/* P1_10 (ZCZ ball B17) spi */
+	P1_10_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "uart", "i2c", "pwm", "pru_uart";
+		pinctrl-0 = <&P1_10_default_pin>;
+		pinctrl-1 = <&P1_10_gpio_pin>;
+		pinctrl-2 = <&P1_10_gpio_pu_pin>;
+		pinctrl-3 = <&P1_10_gpio_pd_pin>;
+		pinctrl-4 = <&P1_10_gpio_input_pin>;
+		pinctrl-5 = <&P1_10_spi_pin>;
+		pinctrl-6 = <&P1_10_uart_pin>;
+		pinctrl-7 = <&P1_10_i2c_pin>;
+		pinctrl-8 = <&P1_10_pwm_pin>;
+		pinctrl-9 = <&P1_10_pru_uart_pin>;
+	};
+
+	/* P1_11 (ZCZ ball R17)  USB1-DP         */
+
+	/* P1_12 (ZCZ ball B16) spi */
+	P1_12_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "i2c", "pwm", "pru_uart";
+		pinctrl-0 = <&P1_12_default_pin>;
+		pinctrl-1 = <&P1_12_gpio_pin>;
+		pinctrl-2 = <&P1_12_gpio_pu_pin>;
+		pinctrl-3 = <&P1_12_gpio_pd_pin>;
+		pinctrl-4 = <&P1_12_gpio_input_pin>;
+		pinctrl-5 = <&P1_12_spi_pin>;
+		pinctrl-6 = <&P1_12_i2c_pin>;
+		pinctrl-7 = <&P1_12_pwm_pin>;
+		pinctrl-8 = <&P1_12_pru_uart_pin>;
+	};
+
+	/* P1_13 (ZCZ ball P17)  USB1-ID         */
+
+	/* P1_14                VOUT-3.3V */
+
+	/* P1_15                GND */
+
+	/* P1_16                GND */
+
+	/* P1_17 (ZCZ ball A9)  VREFN         */
+
+	/* P1_18 (ZCZ ball B9)  VREFP         */
+
+	/* P1_19 (ZCZ ball B6)  AIN0         */
+
+	/* P1_20 (ZCZ ball D14) */
+	P1_20_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruin";
+		pinctrl-0 = <&P1_20_default_pin>;
+		pinctrl-1 = <&P1_20_gpio_pin>;
+		pinctrl-2 = <&P1_20_gpio_pu_pin>;
+		pinctrl-3 = <&P1_20_gpio_pd_pin>;
+		pinctrl-4 = <&P1_20_gpio_input_pin>;
+		pinctrl-5 = <&P1_20_pruin_pin>;
+	};
+
+	/* P1_21 (ZCZ ball C7)  AIN1         */
+
+	/* P1_22                GND */
+
+	/* P1_23 (ZCZ ball B7)  AIN2         */
+
+	/* P1_24                VOUT-5V */
+
+	/* P1_25 (ZCZ ball A7)  AIN3         */
+
+	/* P1_26 (ZCZ ball D18) i2c */
+	P1_26_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "can", "i2c", "pru_uart";
+		pinctrl-0 = <&P1_26_default_pin>;
+		pinctrl-1 = <&P1_26_gpio_pin>;
+		pinctrl-2 = <&P1_26_gpio_pu_pin>;
+		pinctrl-3 = <&P1_26_gpio_pd_pin>;
+		pinctrl-4 = <&P1_26_gpio_input_pin>;
+		pinctrl-5 = <&P1_26_spi_cs_pin>;
+		pinctrl-6 = <&P1_26_can_pin>;
+		pinctrl-7 = <&P1_26_i2c_pin>;
+		pinctrl-8 = <&P1_26_pru_uart_pin>;
+	};
+
+	/* P1_27 (ZCZ ball C8)  AIN4         */
+
+	/* P1_28 (ZCZ ball D17) i2c */
+	P1_28_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "can", "i2c", "pru_uart";
+		pinctrl-0 = <&P1_28_default_pin>;
+		pinctrl-1 = <&P1_28_gpio_pin>;
+		pinctrl-2 = <&P1_28_gpio_pu_pin>;
+		pinctrl-3 = <&P1_28_gpio_pd_pin>;
+		pinctrl-4 = <&P1_28_gpio_input_pin>;
+		pinctrl-5 = <&P1_28_spi_cs_pin>;
+		pinctrl-6 = <&P1_28_can_pin>;
+		pinctrl-7 = <&P1_28_i2c_pin>;
+		pinctrl-8 = <&P1_28_pru_uart_pin>;
+	};
+
+	/* P1_29 (ZCZ ball A14) pruin */
+	P1_29_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin";
+		pinctrl-0 = <&P1_29_default_pin>;
+		pinctrl-1 = <&P1_29_gpio_pin>;
+		pinctrl-2 = <&P1_29_gpio_pu_pin>;
+		pinctrl-3 = <&P1_29_gpio_pd_pin>;
+		pinctrl-4 = <&P1_29_gpio_input_pin>;
+		pinctrl-5 = <&P1_29_qep_pin>;
+		pinctrl-6 = <&P1_29_pruout_pin>;
+		pinctrl-7 = <&P1_29_pruin_pin>;
+	};
+
+	/* P1_30 (ZCZ ball E16) uart */
+	P1_30_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "uart", "can", "i2c", "pruout", "pruin";
+		pinctrl-0 = <&P1_30_default_pin>;
+		pinctrl-1 = <&P1_30_gpio_pin>;
+		pinctrl-2 = <&P1_30_gpio_pu_pin>;
+		pinctrl-3 = <&P1_30_gpio_pd_pin>;
+		pinctrl-4 = <&P1_30_gpio_input_pin>;
+		pinctrl-5 = <&P1_30_spi_cs_pin>;
+		pinctrl-6 = <&P1_30_uart_pin>;
+		pinctrl-7 = <&P1_30_can_pin>;
+		pinctrl-8 = <&P1_30_i2c_pin>;
+		pinctrl-9 = <&P1_30_pruout_pin>;
+		pinctrl-10 = <&P1_30_pruin_pin>;
+	};
+
+	/* P1_31 (ZCZ ball B12) pruin */
+	P1_31_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin";
+		pinctrl-0 = <&P1_31_default_pin>;
+		pinctrl-1 = <&P1_31_gpio_pin>;
+		pinctrl-2 = <&P1_31_gpio_pu_pin>;
+		pinctrl-3 = <&P1_31_gpio_pd_pin>;
+		pinctrl-4 = <&P1_31_gpio_input_pin>;
+		pinctrl-5 = <&P1_31_qep_pin>;
+		pinctrl-6 = <&P1_31_pruout_pin>;
+		pinctrl-7 = <&P1_31_pruin_pin>;
+	};
+
+	/* P1_32 (ZCZ ball E15) uart */
+	P1_32_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "uart", "can", "i2c", "pruout", "pruin";
+		pinctrl-0 = <&P1_32_default_pin>;
+		pinctrl-1 = <&P1_32_gpio_pin>;
+		pinctrl-2 = <&P1_32_gpio_pu_pin>;
+		pinctrl-3 = <&P1_32_gpio_pd_pin>;
+		pinctrl-4 = <&P1_32_gpio_input_pin>;
+		pinctrl-5 = <&P1_32_spi_cs_pin>;
+		pinctrl-6 = <&P1_32_uart_pin>;
+		pinctrl-7 = <&P1_32_can_pin>;
+		pinctrl-8 = <&P1_32_i2c_pin>;
+		pinctrl-9 = <&P1_32_pruout_pin>;
+		pinctrl-10 = <&P1_32_pruin_pin>;
+	};
+
+	/* P1_33 (ZCZ ball B13) pruin */
+	P1_33_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "pwm", "pruout", "pruin";
+		pinctrl-0 = <&P1_33_default_pin>;
+		pinctrl-1 = <&P1_33_gpio_pin>;
+		pinctrl-2 = <&P1_33_gpio_pu_pin>;
+		pinctrl-3 = <&P1_33_gpio_pd_pin>;
+		pinctrl-4 = <&P1_33_gpio_input_pin>;
+		pinctrl-5 = <&P1_33_spi_pin>;
+		pinctrl-6 = <&P1_33_pwm_pin>;
+		pinctrl-7 = <&P1_33_pruout_pin>;
+		pinctrl-8 = <&P1_33_pruin_pin>;
+	};
+
+	/* P1_34 (ZCZ ball T11) */
+	P1_34_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm";
+		pinctrl-0 = <&P1_34_default_pin>;
+		pinctrl-1 = <&P1_34_gpio_pin>;
+		pinctrl-2 = <&P1_34_gpio_pu_pin>;
+		pinctrl-3 = <&P1_34_gpio_pd_pin>;
+		pinctrl-4 = <&P1_34_gpio_input_pin>;
+		pinctrl-5 = <&P1_34_pwm_pin>;
+	};
+
+	/* P1_35 (ZCZ ball V5) pruin */
+	P1_35_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin";
+		pinctrl-0 = <&P1_35_default_pin>;
+		pinctrl-1 = <&P1_35_gpio_pin>;
+		pinctrl-2 = <&P1_35_gpio_pu_pin>;
+		pinctrl-3 = <&P1_35_gpio_pd_pin>;
+		pinctrl-4 = <&P1_35_gpio_input_pin>;
+		pinctrl-5 = <&P1_35_pruout_pin>;
+		pinctrl-6 = <&P1_35_pruin_pin>;
+	};
+
+	/* P1_36 (ZCZ ball A13) pwm */
+	P1_36_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_sclk", "pwm", "pruout", "pruin";
+		pinctrl-0 = <&P1_36_default_pin>;
+		pinctrl-1 = <&P1_36_gpio_pin>;
+		pinctrl-2 = <&P1_36_gpio_pu_pin>;
+		pinctrl-3 = <&P1_36_gpio_pd_pin>;
+		pinctrl-4 = <&P1_36_gpio_input_pin>;
+		pinctrl-5 = <&P1_36_spi_sclk_pin>;
+		pinctrl-6 = <&P1_36_pwm_pin>;
+		pinctrl-7 = <&P1_36_pruout_pin>;
+		pinctrl-8 = <&P1_36_pruin_pin>;
+	};
+
+
+	/************************/
+	/* P2 Header */
+	/************************/
+
+	/* P2_01 (ZCZ ball U14) pwm */
+	P2_01_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm";
+		pinctrl-0 = <&P2_01_default_pin>;
+		pinctrl-1 = <&P2_01_gpio_pin>;
+		pinctrl-2 = <&P2_01_gpio_pu_pin>;
+		pinctrl-3 = <&P2_01_gpio_pd_pin>;
+		pinctrl-4 = <&P2_01_gpio_input_pin>;
+		pinctrl-5 = <&P2_01_pwm_pin>;
+	};
+
+	/* P2_02 (ZCZ ball V17) */
+	P2_02_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P2_02_default_pin>;
+		pinctrl-1 = <&P2_02_gpio_pin>;
+		pinctrl-2 = <&P2_02_gpio_pu_pin>;
+		pinctrl-3 = <&P2_02_gpio_pd_pin>;
+		pinctrl-4 = <&P2_02_gpio_input_pin>;
+	};
+
+	/* P2_03 (ZCZ ball T10) */
+	P2_03_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm";
+		pinctrl-0 = <&P2_03_default_pin>;
+		pinctrl-1 = <&P2_03_gpio_pin>;
+		pinctrl-2 = <&P2_03_gpio_pu_pin>;
+		pinctrl-3 = <&P2_03_gpio_pd_pin>;
+		pinctrl-4 = <&P2_03_gpio_input_pin>;
+		pinctrl-5 = <&P2_03_pwm_pin>;
+	};
+
+	/* P2_04 (ZCZ ball T16) */
+	P2_04_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P2_04_default_pin>;
+		pinctrl-1 = <&P2_04_gpio_pin>;
+		pinctrl-2 = <&P2_04_gpio_pu_pin>;
+		pinctrl-3 = <&P2_04_gpio_pd_pin>;
+		pinctrl-4 = <&P2_04_gpio_input_pin>;
+	};
+
+	/* P2_05 (ZCZ ball T17) uart */
+	P2_05_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart";
+		pinctrl-0 = <&P2_05_default_pin>;
+		pinctrl-1 = <&P2_05_gpio_pin>;
+		pinctrl-2 = <&P2_05_gpio_pu_pin>;
+		pinctrl-3 = <&P2_05_gpio_pd_pin>;
+		pinctrl-4 = <&P2_05_gpio_input_pin>;
+		pinctrl-5 = <&P2_05_uart_pin>;
+	};
+
+	/* P2_06 (ZCZ ball U16) */
+	P2_06_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P2_06_default_pin>;
+		pinctrl-1 = <&P2_06_gpio_pin>;
+		pinctrl-2 = <&P2_06_gpio_pu_pin>;
+		pinctrl-3 = <&P2_06_gpio_pd_pin>;
+		pinctrl-4 = <&P2_06_gpio_input_pin>;
+	};
+
+	/* P2_07 (ZCZ ball U17) uart */
+	P2_07_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart";
+		pinctrl-0 = <&P2_07_default_pin>;
+		pinctrl-1 = <&P2_07_gpio_pin>;
+		pinctrl-2 = <&P2_07_gpio_pu_pin>;
+		pinctrl-3 = <&P2_07_gpio_pd_pin>;
+		pinctrl-4 = <&P2_07_gpio_input_pin>;
+		pinctrl-5 = <&P2_07_uart_pin>;
+	};
+
+	/* P2_08 (ZCZ ball U18) */
+	P2_08_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P2_08_default_pin>;
+		pinctrl-1 = <&P2_08_gpio_pin>;
+		pinctrl-2 = <&P2_08_gpio_pu_pin>;
+		pinctrl-3 = <&P2_08_gpio_pd_pin>;
+		pinctrl-4 = <&P2_08_gpio_input_pin>;
+	};
+
+	/* P2_09 (ZCZ ball D15) i2c */
+	P2_09_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "can", "i2c", "pru_uart", "pruin";
+		pinctrl-0 = <&P2_09_default_pin>;
+		pinctrl-1 = <&P2_09_gpio_pin>;
+		pinctrl-2 = <&P2_09_gpio_pu_pin>;
+		pinctrl-3 = <&P2_09_gpio_pd_pin>;
+		pinctrl-4 = <&P2_09_gpio_input_pin>;
+		pinctrl-5 = <&P2_09_uart_pin>;
+		pinctrl-6 = <&P2_09_can_pin>;
+		pinctrl-7 = <&P2_09_i2c_pin>;
+		pinctrl-8 = <&P2_09_pru_uart_pin>;
+		pinctrl-9 = <&P2_09_pruin_pin>;
+	};
+
+	/* P2_10 (ZCZ ball R14) */
+	P2_10_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep";
+		pinctrl-0 = <&P2_10_default_pin>;
+		pinctrl-1 = <&P2_10_gpio_pin>;
+		pinctrl-2 = <&P2_10_gpio_pu_pin>;
+		pinctrl-3 = <&P2_10_gpio_pd_pin>;
+		pinctrl-4 = <&P2_10_gpio_input_pin>;
+		pinctrl-5 = <&P2_10_qep_pin>;
+	};
+
+	/* P2_11 (ZCZ ball D16) i2c */
+	P2_11_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "uart", "can", "i2c", "pru_uart", "pruin";
+		pinctrl-0 = <&P2_11_default_pin>;
+		pinctrl-1 = <&P2_11_gpio_pin>;
+		pinctrl-2 = <&P2_11_gpio_pu_pin>;
+		pinctrl-3 = <&P2_11_gpio_pd_pin>;
+		pinctrl-4 = <&P2_11_gpio_input_pin>;
+		pinctrl-5 = <&P2_11_uart_pin>;
+		pinctrl-6 = <&P2_11_can_pin>;
+		pinctrl-7 = <&P2_11_i2c_pin>;
+		pinctrl-8 = <&P2_11_pru_uart_pin>;
+		pinctrl-9 = <&P2_11_pruin_pin>;
+	};
+
+	/* P2_12                POWER_BUTTON */
+
+	/* P2_13                VOUT-5V */
+
+	/* P2_14                BAT-VIN */
+
+	/* P2_15                GND */
+
+	/* P2_16                BAT-TEMP */
+
+	/* P2_17 (ZCZ ball V12) */
+	P2_17_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P2_17_default_pin>;
+		pinctrl-1 = <&P2_17_gpio_pin>;
+		pinctrl-2 = <&P2_17_gpio_pu_pin>;
+		pinctrl-3 = <&P2_17_gpio_pd_pin>;
+		pinctrl-4 = <&P2_17_gpio_input_pin>;
+	};
+
+	/* P2_18 (ZCZ ball U13) */
+	P2_18_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pru_ecap", "pruin";
+		pinctrl-0 = <&P2_18_default_pin>;
+		pinctrl-1 = <&P2_18_gpio_pin>;
+		pinctrl-2 = <&P2_18_gpio_pu_pin>;
+		pinctrl-3 = <&P2_18_gpio_pd_pin>;
+		pinctrl-4 = <&P2_18_gpio_input_pin>;
+		pinctrl-5 = <&P2_18_qep_pin>;
+		pinctrl-6 = <&P2_18_pru_ecap_pin>;
+		pinctrl-7 = <&P2_18_pruin_pin>;
+	};
+
+	/* P2_19 (ZCZ ball U12) */
+	P2_19_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pwm";
+		pinctrl-0 = <&P2_19_default_pin>;
+		pinctrl-1 = <&P2_19_gpio_pin>;
+		pinctrl-2 = <&P2_19_gpio_pu_pin>;
+		pinctrl-3 = <&P2_19_gpio_pd_pin>;
+		pinctrl-4 = <&P2_19_gpio_input_pin>;
+		pinctrl-5 = <&P2_19_pwm_pin>;
+	};
+
+	/* P2_20 (ZCZ ball T13) */
+	P2_20_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input";
+		pinctrl-0 = <&P2_20_default_pin>;
+		pinctrl-1 = <&P2_20_gpio_pin>;
+		pinctrl-2 = <&P2_20_gpio_pu_pin>;
+		pinctrl-3 = <&P2_20_gpio_pd_pin>;
+		pinctrl-4 = <&P2_20_gpio_input_pin>;
+	};
+
+	/* P2_21                GND */
+
+	/* P2_22 (ZCZ ball V13) */
+	P2_22_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruin";
+		pinctrl-0 = <&P2_22_default_pin>;
+		pinctrl-1 = <&P2_22_gpio_pin>;
+		pinctrl-2 = <&P2_22_gpio_pu_pin>;
+		pinctrl-3 = <&P2_22_gpio_pd_pin>;
+		pinctrl-4 = <&P2_22_gpio_input_pin>;
+		pinctrl-5 = <&P2_22_qep_pin>;
+		pinctrl-6 = <&P2_22_pruin_pin>;
+	};
+
+	/* P2_23                VOUT-3.3V */
+
+	/* P2_24 (ZCZ ball T12) */
+	P2_24_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout";
+		pinctrl-0 = <&P2_24_default_pin>;
+		pinctrl-1 = <&P2_24_gpio_pin>;
+		pinctrl-2 = <&P2_24_gpio_pu_pin>;
+		pinctrl-3 = <&P2_24_gpio_pd_pin>;
+		pinctrl-4 = <&P2_24_gpio_input_pin>;
+		pinctrl-5 = <&P2_24_qep_pin>;
+		pinctrl-6 = <&P2_24_pruout_pin>;
+	};
+
+	/* P2_25 (ZCZ ball E17) spi */
+	P2_25_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "spi_cs", "uart", "can", "i2c";
+		pinctrl-0 = <&P2_25_default_pin>;
+		pinctrl-1 = <&P2_25_gpio_pin>;
+		pinctrl-2 = <&P2_25_gpio_pu_pin>;
+		pinctrl-3 = <&P2_25_gpio_pd_pin>;
+		pinctrl-4 = <&P2_25_gpio_input_pin>;
+		pinctrl-5 = <&P2_25_spi_pin>;
+		pinctrl-6 = <&P2_25_spi_cs_pin>;
+		pinctrl-7 = <&P2_25_uart_pin>;
+		pinctrl-8 = <&P2_25_can_pin>;
+		pinctrl-9 = <&P2_25_i2c_pin>;
+	};
+
+	/* P2_26                RESET# */
+
+	/* P2_27 (ZCZ ball E18) spi */
+	P2_27_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "uart", "can", "i2c";
+		pinctrl-0 = <&P2_27_default_pin>;
+		pinctrl-1 = <&P2_27_gpio_pin>;
+		pinctrl-2 = <&P2_27_gpio_pu_pin>;
+		pinctrl-3 = <&P2_27_gpio_pd_pin>;
+		pinctrl-4 = <&P2_27_gpio_input_pin>;
+		pinctrl-5 = <&P2_27_spi_pin>;
+		pinctrl-6 = <&P2_27_uart_pin>;
+		pinctrl-7 = <&P2_27_can_pin>;
+		pinctrl-8 = <&P2_27_i2c_pin>;
+	};
+
+	/* P2_28 (ZCZ ball D13) pruin */
+	P2_28_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin";
+		pinctrl-0 = <&P2_28_default_pin>;
+		pinctrl-1 = <&P2_28_gpio_pin>;
+		pinctrl-2 = <&P2_28_gpio_pu_pin>;
+		pinctrl-3 = <&P2_28_gpio_pd_pin>;
+		pinctrl-4 = <&P2_28_gpio_input_pin>;
+		pinctrl-5 = <&P2_28_qep_pin>;
+		pinctrl-6 = <&P2_28_pruout_pin>;
+		pinctrl-7 = <&P2_28_pruin_pin>;
+	};
+
+	/* P2_29 (ZCZ ball C18) spi_sclk */
+	P2_29_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "spi_sclk", "uart", "pwm", "pru_ecap";
+		pinctrl-0 = <&P2_29_default_pin>;
+		pinctrl-1 = <&P2_29_gpio_pin>;
+		pinctrl-2 = <&P2_29_gpio_pu_pin>;
+		pinctrl-3 = <&P2_29_gpio_pd_pin>;
+		pinctrl-4 = <&P2_29_gpio_input_pin>;
+		pinctrl-5 = <&P2_29_spi_cs_pin>;
+		pinctrl-6 = <&P2_29_spi_sclk_pin>;
+		pinctrl-7 = <&P2_29_uart_pin>;
+		pinctrl-8 = <&P2_29_pwm_pin>;
+		pinctrl-9 = <&P2_29_pru_ecap_pin>;
+	};
+
+	/* P2_30 (ZCZ ball C12) pruin */
+	P2_30_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "pwm", "pruout", "pruin";
+		pinctrl-0 = <&P2_30_default_pin>;
+		pinctrl-1 = <&P2_30_gpio_pin>;
+		pinctrl-2 = <&P2_30_gpio_pu_pin>;
+		pinctrl-3 = <&P2_30_gpio_pd_pin>;
+		pinctrl-4 = <&P2_30_gpio_input_pin>;
+		pinctrl-5 = <&P2_30_spi_cs_pin>;
+		pinctrl-6 = <&P2_30_pwm_pin>;
+		pinctrl-7 = <&P2_30_pruout_pin>;
+		pinctrl-8 = <&P2_30_pruin_pin>;
+	};
+
+	/* P2_31 (ZCZ ball A15) spi_cs */
+	P2_31_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "pruin";
+		pinctrl-0 = <&P2_31_default_pin>;
+		pinctrl-1 = <&P2_31_gpio_pin>;
+		pinctrl-2 = <&P2_31_gpio_pu_pin>;
+		pinctrl-3 = <&P2_31_gpio_pd_pin>;
+		pinctrl-4 = <&P2_31_gpio_input_pin>;
+		pinctrl-5 = <&P2_31_spi_cs_pin>;
+		pinctrl-6 = <&P2_31_pruin_pin>;
+	};
+
+	/* P2_32 (ZCZ ball D12) pruin */
+	P2_32_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi", "pwm", "pruout", "pruin";
+		pinctrl-0 = <&P2_32_default_pin>;
+		pinctrl-1 = <&P2_32_gpio_pin>;
+		pinctrl-2 = <&P2_32_gpio_pu_pin>;
+		pinctrl-3 = <&P2_32_gpio_pd_pin>;
+		pinctrl-4 = <&P2_32_gpio_input_pin>;
+		pinctrl-5 = <&P2_32_spi_pin>;
+		pinctrl-6 = <&P2_32_pwm_pin>;
+		pinctrl-7 = <&P2_32_pruout_pin>;
+		pinctrl-8 = <&P2_32_pruin_pin>;
+	};
+
+	/* P2_33 (ZCZ ball R12) */
+	P2_33_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout";
+		pinctrl-0 = <&P2_33_default_pin>;
+		pinctrl-1 = <&P2_33_gpio_pin>;
+		pinctrl-2 = <&P2_33_gpio_pu_pin>;
+		pinctrl-3 = <&P2_33_gpio_pd_pin>;
+		pinctrl-4 = <&P2_33_gpio_input_pin>;
+		pinctrl-5 = <&P2_33_qep_pin>;
+		pinctrl-6 = <&P2_33_pruout_pin>;
+	};
+
+	/* P2_34 (ZCZ ball C13) pruin */
+	P2_34_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "qep", "pruout", "pruin";
+		pinctrl-0 = <&P2_34_default_pin>;
+		pinctrl-1 = <&P2_34_gpio_pin>;
+		pinctrl-2 = <&P2_34_gpio_pu_pin>;
+		pinctrl-3 = <&P2_34_gpio_pd_pin>;
+		pinctrl-4 = <&P2_34_gpio_input_pin>;
+		pinctrl-5 = <&P2_34_qep_pin>;
+		pinctrl-6 = <&P2_34_pruout_pin>;
+		pinctrl-7 = <&P2_34_pruin_pin>;
+	};
+
+	/* P2_35 (ZCZ ball U5) gpio_input */
+	P2_35_pinmux {
+		compatible = "bone-pinmux-helper";
+		status = "okay";
+		pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "pruout", "pruin";
+		pinctrl-0 = <&P2_35_default_pin>;
+		pinctrl-1 = <&P2_35_gpio_pin>;
+		pinctrl-2 = <&P2_35_gpio_pu_pin>;
+		pinctrl-3 = <&P2_35_gpio_pd_pin>;
+		pinctrl-4 = <&P2_35_gpio_input_pin>;
+		pinctrl-5 = <&P2_35_pruout_pin>;
+		pinctrl-6 = <&P2_35_pruin_pin>;
+	};
+
+	/* P2_36 (ZCZ ball C9)  AIN7         */
+
+	cape-universal {
+		compatible = "gpio-of-helper";
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <>;
+
+		P1_02 {
+			gpio-name = "P1_02";
+			gpio = <&gpio2 23 0>;
+			input;
+			dir-changeable;
+		};
+
+		P1_04 {
+			gpio-name = "P1_04";
+			gpio = <&gpio2 25 0>;
+			input;
+			dir-changeable;
+		};
+
+		P1_06 {
+			gpio-name = "P1_06";
+			gpio = <&gpio0 5 0>;
+			input;
+			dir-changeable;
+		};
+
+		P1_08 {
+			gpio-name = "P1_08";
+			gpio = <&gpio0 2 0>;
+			input;
+			dir-changeable;
+		};
+
+		P1_10 {
+			gpio-name = "P1_10";
+			gpio = <&gpio0 3 0>;
+			input;
+			dir-changeable;
+		};
+
+		P1_12 {
+			gpio-name = "P1_12";
+			gpio = <&gpio0 4 0>;
+			input;
+			dir-changeable;
+		};
+
+		P1_20 {
+			gpio-name = "P1_20";
+			gpio = <&gpio0 20 0>;
+			input;
+			dir-changeable;
+		};
+
+		P1_26 {
+			gpio-name = "P1_26";
+			gpio = <&gpio0 12 0>;
+			input;
+			dir-changeable;
+		};
+
+		P1_28 {
+			gpio-name = "P1_28";
+			gpio = <&gpio0 13 0>;
+			input;
+			dir-changeable;
+		};
+
+		P1_29 {
+			gpio-name = "P1_29";
+			gpio = <&gpio3 21 0>;
+			input;
+			dir-changeable;
+		};
+
+		P1_30 {
+			gpio-name = "P1_30";
+			gpio = <&gpio1 11 0>;
+			input;
+			dir-changeable;
+		};
+
+		P1_31 {
+			gpio-name = "P1_31";
+			gpio = <&gpio3 18 0>;
+			input;
+			dir-changeable;
+		};
+
+		P1_32 {
+			gpio-name = "P1_32";
+			gpio = <&gpio1 10 0>;
+			input;
+			dir-changeable;
+		};
+
+		P1_33 {
+			gpio-name = "P1_33";
+			gpio = <&gpio3 15 0>;
+			input;
+			dir-changeable;
+		};
+
+		P1_34 {
+			gpio-name = "P1_34";
+			gpio = <&gpio0 26 0>;
+			input;
+			dir-changeable;
+		};
+
+		P1_35 {
+			gpio-name = "P1_35";
+			gpio = <&gpio2 24 0>;
+			input;
+			dir-changeable;
+		};
+
+		P1_36 {
+			gpio-name = "P1_36";
+			gpio = <&gpio3 14 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_01 {
+			gpio-name = "P2_01";
+			gpio = <&gpio1 18 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_02 {
+			gpio-name = "P2_02";
+			gpio = <&gpio1 27 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_03 {
+			gpio-name = "P2_03";
+			gpio = <&gpio0 23 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_04 {
+			gpio-name = "P2_04";
+			gpio = <&gpio1 26 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_05 {
+			gpio-name = "P2_05";
+			gpio = <&gpio0 30 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_06 {
+			gpio-name = "P2_06";
+			gpio = <&gpio1 25 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_07 {
+			gpio-name = "P2_07";
+			gpio = <&gpio0 31 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_08 {
+			gpio-name = "P2_08";
+			gpio = <&gpio1 28 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_09 {
+			gpio-name = "P2_09";
+			gpio = <&gpio0 15 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_10 {
+			gpio-name = "P2_10";
+			gpio = <&gpio1 20 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_11 {
+			gpio-name = "P2_11";
+			gpio = <&gpio0 14 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_17 {
+			gpio-name = "P2_17";
+			gpio = <&gpio2 1 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_18 {
+			gpio-name = "P2_18";
+			gpio = <&gpio1 15 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_19 {
+			gpio-name = "P2_19";
+			gpio = <&gpio0 27 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_20 {
+			gpio-name = "P2_20";
+			gpio = <&gpio2 0 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_22 {
+			gpio-name = "P2_22";
+			gpio = <&gpio1 14 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_24 {
+			gpio-name = "P2_24";
+			gpio = <&gpio1 12 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_25 {
+			gpio-name = "P2_25";
+			gpio = <&gpio1 9 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_27 {
+			gpio-name = "P2_27";
+			gpio = <&gpio1 8 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_28 {
+			gpio-name = "P2_28";
+			gpio = <&gpio3 20 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_29 {
+			gpio-name = "P2_29";
+			gpio = <&gpio0 7 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_30 {
+			gpio-name = "P2_30";
+			gpio = <&gpio3 17 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_31 {
+			gpio-name = "P2_31";
+			gpio = <&gpio0 19 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_32 {
+			gpio-name = "P2_32";
+			gpio = <&gpio3 16 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_33 {
+			gpio-name = "P2_33";
+			gpio = <&gpio1 13 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_34 {
+			gpio-name = "P2_34";
+			gpio = <&gpio3 19 0>;
+			input;
+			dir-changeable;
+		};
+
+		P2_35 {
+			gpio-name = "P2_35";
+			gpio = <&gpio2 22 0>;
+			input;
+			dir-changeable;
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-lite.dts b/arch/arm/boot/dts/am335x-sancloud-bbe-lite.dts
index d6ef19311..5ba77a20f 100644
--- a/arch/arm/boot/dts/am335x-sancloud-bbe-lite.dts
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe-lite.dts
@@ -16,6 +16,11 @@ / {
 		     "ti,am335x-bone-black",
 		     "ti,am335x-bone",
 		     "ti,am33xx";
+
+	chosen {
+		base_dtb = "am335x-sancloud-bbe-lite.dts";
+		base_dtb_timestamp = __TIMESTAMP__;
+	};
 };
 
 &am33xx_pinmux {
@@ -42,6 +47,7 @@ channel@0 {
 		#size-cells = <0>;
 
 		compatible = "micron,spi-authenta";
+		symlink = "bone/spi/0.0";
 
 		reg = <0>;
 		spi-max-frequency = <16000000>;
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
index efbe93135..5df4fc464 100644
--- a/arch/arm/boot/dts/am335x-sancloud-bbe.dts
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
@@ -14,6 +14,11 @@
 / {
 	model = "SanCloud BeagleBone Enhanced";
 	compatible = "sancloud,am335x-boneenhanced", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+
+	chosen {
+		base_dtb = "am335x-sancloud-bbe.dts";
+		base_dtb_timestamp = __TIMESTAMP__;
+	};
 };
 
 &am33xx_pinmux {
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
index 356446131..3cfcf9ddf 100644
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -300,7 +300,7 @@ scm: scm@0 {
 				am33xx_pinmux: pinmux@800 {
 					compatible = "pinctrl-single";
 					reg = <0x800 0x238>;
-					#pinctrl-cells = <2>;
+					#pinctrl-cells = <1>;
 					pinctrl-single,register-width = <32>;
 					pinctrl-single,function-mask = <0x7f>;
 				};
@@ -852,7 +852,7 @@ pruss_tm: target-module@300000 {	/* 0x4a300000, ap 9 04.0 */
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x300000 0x80000>;
-			status = "disabled";
+			status = "okay";
 
 			pruss: pruss@0 {
 				compatible = "ti,am3356-pruss";
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index f6ec85d58..ba7ebd5ee 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -633,6 +633,13 @@ target-module@56000000 {
 			 * Closed source PowerVR driver, no child device
 			 * binding or driver in mainline
 			 */
+			gpu: gpu@0 {
+				compatible = "ti,am3352-sgx530", "img,sgx530";
+				reg = <0x0 0x10000>;
+				interrupts = <37>;
+				clocks = <&gfx_fck_div_ck>;
+				clock-names = "fclk";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/am5729-beagleboneai.dts b/arch/arm/boot/dts/am5729-beagleboneai.dts
index 149cfafb9..630107b27 100644
--- a/arch/arm/boot/dts/am5729-beagleboneai.dts
+++ b/arch/arm/boot/dts/am5729-beagleboneai.dts
@@ -26,6 +26,8 @@ aliases {
 
 	chosen {
 		stdout-path = &uart1;
+		base_dtb = "am5729-beagleboneai.dts";
+		base_dtb_timestamp = __TIMESTAMP__;
 	};
 
 	memory@0 {
@@ -204,6 +206,7 @@ extcon_usb1: extcon_usb1 {
 &i2c1 {
 	status = "okay";
 	clock-frequency = <400000>;
+	symlink = "bone/i2c/0";
 
 	tps659038: tps659038@58 {
 		compatible = "ti,tps659038";
@@ -486,6 +489,7 @@ &cpu0 {
 
 &uart1 {
 	status = "okay";
+	symlink = "bone/uart/0";
 };
 
 &davinci_mdio_sw {
@@ -675,6 +679,7 @@ &uart6 {
 &i2c4 {
 	status = "okay";
 	clock-frequency = <100000>;
+	symlink = "bone/i2c/2";
 };
 
 &cpu0_opp_table {
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
index 83e174e05..0ba920286 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
@@ -7,6 +7,11 @@
 
 / {
 	model = "TI AM5728 BeagleBoard-X15 rev B1";
+
+	chosen {
+		base_dtb = "am57xx-beagle-x15-revb1.dts";
+		base_dtb_timestamp = __TIMESTAMP__;
+	};
 };
 
 &tpd12s015 {
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
index 656dd8446..9c721c030 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
@@ -7,6 +7,11 @@
 
 / {
 	model = "TI AM5728 BeagleBoard-X15 rev C";
+
+	chosen {
+		base_dtb = "am57xx-beagle-x15-revc.dts";
+		base_dtb_timestamp = __TIMESTAMP__;
+	};
 };
 
 &tpd12s015 {
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 0a8b16505..028928f8d 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -8,6 +8,11 @@
 / {
 	/* NOTE: This describes the "original" pre-production A2 revision */
 	model = "TI AM5728 BeagleBoard-X15";
+
+	chosen {
+		base_dtb = "am57xx-beagle-x15.dts";
+		base_dtb_timestamp = __TIMESTAMP__;
+	};
 };
 
 &tpd12s015 {
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 97ce0c4f1..493da056c 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -853,6 +853,22 @@ target-module@56000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x56000000 0x2000000>;
+
+			/*
+			 * Closed source PowerVR driver, no child device
+			 * binding or driver in mainline
+			 */
+			gpu: gpu@0 {
+				compatible = "ti,dra7-sgx544", "img,sgx544";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&l3_iclk_div>,
+					 <&gpu_core_gclk_mux>,
+					 <&gpu_hyd_gclk_mux>;
+				clock-names = "iclk",
+					      "fclk1",
+					      "fclk2";
+			};
 		};
 
 		crossbar_mpu: crossbar@4a002a48 {
diff --git a/arch/arm/boot/dts/imx7d-pico-pi.dts b/arch/arm/boot/dts/imx7d-pico-pi.dts
index f263e391e..15a6ca47c 100644
--- a/arch/arm/boot/dts/imx7d-pico-pi.dts
+++ b/arch/arm/boot/dts/imx7d-pico-pi.dts
@@ -8,6 +8,10 @@ / {
 	model = "TechNexion PICO-IMX7D Board and PI baseboard";
 	compatible = "technexion,imx7d-pico-pi", "fsl,imx7d";
 
+	chosen {
+		stdout-path = "serial4:115200n8";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/overlays/AM335X-PRU-UIO-00A0.dts b/arch/arm/boot/dts/overlays/AM335X-PRU-UIO-00A0.dts
new file mode 100644
index 000000000..f3016efca
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/AM335X-PRU-UIO-00A0.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+/*
+ * Helper to show loaded overlays under: /proc/device-tree/chosen/overlays/
+ */
+&{/chosen} {
+	overlays {
+		AM335X-PRU-UIO-00A0.kernel = __TIMESTAMP__;
+	};
+};
+
+
+&pruss_tm {
+	status = "okay";
+};
+
+&pruss {
+	compatible = "ti,pruss-v2";
+	ti,pintc-offset = <0x20000>;
+	interrupt-parent = <&intc>;
+	interrupts = <20 21 22 23 24 25 26 27>;
+};
diff --git a/arch/arm/boot/dts/overlays/BB-ADC-00A0.dts b/arch/arm/boot/dts/overlays/BB-ADC-00A0.dts
new file mode 100644
index 000000000..914b7aa3d
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/BB-ADC-00A0.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+/*
+ * Helper to show loaded overlays under: /proc/device-tree/chosen/overlays/
+ */
+&{/chosen} {
+	overlays {
+		BB-ADC-00A0.kernel = __TIMESTAMP__;
+	};
+};
+
+&tscadc {
+	status = "okay";
+	adc {
+		// Configure one or more (up to 8) steps for the adc to execute:
+
+
+		// For each step, the channel to sample.
+		//	range: 0 .. 7
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+		//
+		// BeagleBone Black (and most other variants):
+		//	ch 0	P9.39
+		//	ch 1	P9.40
+		//	ch 2	P9.37
+		//	ch 3	P9.38
+		//	ch 4	P9.33
+		//	ch 5	P9.36
+		//	ch 6	P9.35
+		//	ch 7	measures 0.5 * VDD_3V3B with 2.4 kΩ source impedance
+		//
+		// PocketBeagle:
+		//	ch 0	P1.19
+		//	ch 1	P1.21
+		//	ch 2	P1.23
+		//	ch 3	P1.25
+		//	ch 4	P1.27
+		//	ch 5	P2.35 via 10k/10k voltage divider
+		//	ch 6	P1.02 via 10k/10k voltage divider
+		//	ch 7	P2.36 via pmic mux
+		//
+		// The divider used on PocketBeagle channels 5 and 6 makes the effective voltage V_eff and
+		// source impedance Z_eff seen by the adc on these channels depend on the voltage V_src and
+		// impedance Z_src of the source connected to the corresponding pin as follows:
+		//
+		//	V_eff = V_src / (2 + Z_src / (10 kΩ))
+		//	Z_eff = 5 kΩ * (1 + Z_src / (Z_src + 20 kΩ))
+		//		≈ 5 kΩ + Z_src / 4    for small values of Z_src (up to 2 kΩ or so)
+
+
+		// For each step, number of adc clock cycles to wait between setting up muxes and sampling.
+		//	range: 0 .. 262143
+		//	optional, default is 152 (XXX but why?!)
+		ti,chan-step-opendelay = <152 152 152 152 152 152 152 152>;
+		//`
+		// XXX is there any purpose to set this nonzero other than to fine-tune the sample rate?
+
+
+		// For each step, how many times it should sample to average.
+		//	range: 1 .. 16, must be power of two (i.e. 1, 2, 4, 8, or 16)
+		//	optional, default is 16
+		ti,chan-step-avg = <16 16 16 16 16 16 16 16>;
+		//
+		// If you're using periodic sampling (using the iio block device rather than sysfs) then
+		// you should consider setting this to 1 and if desired reduce the samplerate in userspace
+		// instead since averaging isn't a particularly good low-pass filter.
+		//
+		// If you're using sysfs to occasionally read a value, then the default value of 16 will
+		// still get you the most accurate readings.
+
+
+		// For each step, number of adc clock cycles to sample minus two.
+		//	range: 0 .. 255   (resulting in sampling time of 2 .. 257 cycles)
+		//	optional, default is 0
+		ti,chan-step-sampledelay = <0 0 0 0 0 0 0 0>;
+		//
+		// If this is set too low, accuracy will deteriorate when the thing you're measuring has a
+		// high source impedance.  The maximum source impedance recommended (by erratum 1.0.32) is:
+		//	(2 + sampledelay) * 2.873 kΩ - 0.2 kΩ
+		// which means that the default should be fine for source impedance up to 5.5 kΩ.
+		//
+		// (This seems to ensure the sampling time is at least 21 times the RC constant, based on
+		// the 5.5 pF nominal capacitance specified in the datasheet.)
+
+
+		// After sampling, conversion time is 13 adc clock cycles.
+		//
+		// The adc clock frequency is 3 MHz, therefore the total time per step in microseconds is:
+		//	( opendelay + avg * ( 2 + sampledelay + 13 ) ) / 3
+		//
+		// If all steps use the same timings then the sample rate will be:
+		//	3 MHz / ( opendelay + avg * ( 2 + sampledelay + 13 ) ) / number_of_steps
+		//
+		// The highest samplerate obtainable (avg=1, opendelay=0, sampledelay=0) is therefore:
+		//	200 kHz / number_of_steps
+		//	= 25 kHz    when using all 8 steps.
+		//
+		// Using avg=16 reduces that to:
+		//	12.5 kHz / number_of_steps
+		//	= 1.5625 kHz    when using all 8 steps.
+		//
+		// Using the default values (avg=16, opendelay=152, sampledelay=0) reduces that to:
+		//	7.653 kHz / number_of_steps
+		//	= 0.9566 kHz    when using all 8 steps.
+	};
+};
diff --git a/arch/arm/boot/dts/overlays/BB-BBBW-WL1835-00A0.dts b/arch/arm/boot/dts/overlays/BB-BBBW-WL1835-00A0.dts
new file mode 100644
index 000000000..1f09a3999
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/BB-BBBW-WL1835-00A0.dts
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/*
+ * Helper to show loaded overlays under: /proc/device-tree/chosen/overlays/
+ */
+&{/chosen} {
+	overlays {
+		BB-BBBW-WL1835-00A0.kernel = __TIMESTAMP__;
+	};
+};
+
+&{/} {
+	model = "TI AM335x BeagleBone Black Wireless";
+	compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+
+	wlan_en_reg: fixedregulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us= <70000>;
+
+		/* WL_EN */
+		gpio = <&gpio3 9 0>;
+		enable-active-high;
+	};
+};
+
+&am33xx_pinmux {
+	bt_pins: pinmux_bt_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gmii1_txd0.gpio0_28 - BT_EN */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE6 ) /* (L15) gmii1_rxd1.mmc2_clk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLUP, MUX_MODE6 ) /* (J16) gmii1_txen.mmc2_cmd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (J17) gmii1_rxdv.mmc2_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (J18) gmii1_txd3.mmc2_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (K15) gmii1_txd2.mmc2_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (H16) gmii1_col.mmc2_dat3 */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gmii1_rxd3.uart3_rxd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* gmii1_rxd2.uart3_txd */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3)		/* mdio_data.uart3_ctsn */
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* mdio_clk.uart3_rtsn */
+		>;
+	};
+
+	wl18xx_pins: pinmux_wl18xx_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gmii1_txclk.gpio3_9 WL_EN */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_refclk.gpio0_29 WL_IRQ */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gmii1_rxclk.gpio3_10 LS_BUF_EN */
+		>;
+	};
+};
+
+&mac {
+	status = "disabled";
+};
+
+&mmc3 {
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
+	dma-names = "tx", "rx";
+	status = "okay";
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins &bt_pins>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1835-st";
+		enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&gpio3 {
+	ls-buf-en-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LS_BUF_EN";
+	};
+};
diff --git a/arch/arm/boot/dts/overlays/BB-BBGG-WL1835-00A0.dts b/arch/arm/boot/dts/overlays/BB-BBGG-WL1835-00A0.dts
new file mode 100644
index 000000000..1db714417
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/BB-BBGG-WL1835-00A0.dts
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/*
+ * Helper to show loaded overlays under: /proc/device-tree/chosen/overlays/
+ */
+&{/chosen} {
+	overlays {
+		BB-BBGG-WL1835-00A0.kernel = __TIMESTAMP__;
+		wl1835_bt = "S3-texas-300000";
+	};
+};
+
+&{/} {
+	model = "SeeedStudio BeagleBone Green Gateway";
+	compatible = "ti,am335x-bone-green-gateway", "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+
+	aliases {
+		rtc0 = &extrtc;
+		rtc1 = "/ocp/rtc@44e3e000";
+	};
+
+	wlan_en_reg: fixedregulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us= <70000>;
+
+		/* WL_EN */
+		gpio = <&gpio3 9 0>;
+		enable-active-high;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		//pinctrl-0 = <&user_leds_s0>;
+		pinctrl-0 = <&user_leds_s0 &bt_pins>;
+
+		compatible = "gpio-leds";
+
+		led2 {
+			label = "beaglebone:green:usr0";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "beaglebone:green:usr1";
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		led5 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led6 {
+			label = "beaglebone:green:usr4";
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "netdev";
+			default-state = "off";
+		};
+
+		wl18xx_bt_en: led7 {
+			label = "wl18xx_bt_en";
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usbhost_pins>;
+
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* WL_Active_LED / USR4 */
+		>;
+	};
+
+	bt_pins: pinmux_bt_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gmii1_txd0.gpio0_28 - BT_EN */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE6 ) /* (L15) gmii1_rxd1.mmc2_clk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLUP, MUX_MODE6 ) /* (J16) gmii1_txen.mmc2_cmd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (J17) gmii1_rxdv.mmc2_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (J18) gmii1_txd3.mmc2_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (K15) gmii1_txd2.mmc2_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (H16) gmii1_col.mmc2_dat3 */
+		>;
+	};
+
+	uart2_grove_pins: pinmux_uart2_grove_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x90c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6)
+			AM33XX_IOPAD(0x910, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE6)
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gmii1_rxd3.uart3_rxd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* gmii1_rxd2.uart3_txd */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3)		/* mdio_data.uart3_ctsn */
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* mdio_clk.uart3_rtsn */
+		>;
+	};
+
+	usbhost_pins: pinmux_usbhost_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gmii1_txd1.gpio0[21] */
+		>;
+	};
+
+	wl18xx_pins: pinmux_wl18xx_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gmii1_txclk.gpio3_9 WL_EN */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_refclk.gpio0_29 WL_IRQ */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gmii1_rxclk.gpio3_10 LS_BUF_EN */
+		>;
+	};
+};
+
+&mac {
+	status = "disabled";
+};
+
+&mmc3 {
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
+	dma-names = "tx", "rx";
+	status = "okay";
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_grove_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	//pinctrl-0 = <&uart3_pins &bt_pins>;
+	status = "okay";
+
+	//bluetooth {
+	//	compatible = "ti,wl1835-st";
+	//	enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+	//};
+};
+
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	extrtc: rtc@68 {
+		compatible = "dallas,ds1340";
+		reg = <0x68>;
+	};
+};
+
+// (K16) gmii1_txd1.gpio0[21]
+&gpio0 {
+	usb-reset-hog {
+		gpio-hog;
+		gpios = <21 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb_reset";
+	};
+};
+
+&gpio3 {
+	ls-buf-en-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LS_BUF_EN";
+	};
+};
+
+&usb1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub@1 {
+		compatible = "usb424,9512";
+		reg = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: ethernet@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/overlays/BB-BBGW-WL1835-00A0.dts b/arch/arm/boot/dts/overlays/BB-BBGW-WL1835-00A0.dts
new file mode 100644
index 000000000..23e26edf7
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/BB-BBGW-WL1835-00A0.dts
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/*
+ * Helper to show loaded overlays under: /proc/device-tree/chosen/overlays/
+ */
+&{/chosen} {
+	overlays {
+		BB-BBGW-WL1835-00A0.kernel = __TIMESTAMP__;
+		wl1835_bt = "S3-texas-300000";
+	};
+};
+
+/*
+ * Free up the pins used by the cape from the pinmux helpers.
+ */
+&ocp {
+	P9_12_pinmux { status = "disabled"; };	/* gpmc_ad12.gpio1_28 BT_EN */
+	P8_12_pinmux { status = "disabled"; };	/* gpmc_ad12.mmc2_dat0 */
+	P8_11_pinmux { status = "disabled"; };	/* gpmc_ad13.mmc2_dat1 */
+	P8_16_pinmux { status = "disabled"; };	/* gpmc_ad14.mmc2_dat2 */
+	P8_15_pinmux { status = "disabled"; };	/* gpmc_ad15.mmc2_dat3 */
+
+	P8_18_pinmux { status = "disabled"; };	/* gpmc_clk.mmc2_clk */
+
+	//Audio...
+	P9_28_pinmux { status = "disabled"; };
+	P9_29_pinmux { status = "disabled"; };
+	P9_31_pinmux { status = "disabled"; };
+};
+
+&{/} {
+	model = "TI AM335x BeagleBone Green Wireless";
+	compatible = "ti,am335x-bone-green-wireless", "ti,am335x-bone-green", "ti,am335x-bone", "ti,am33xx";
+
+	wlan_en_reg: fixedregulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us= <70000>;
+
+		/* WL_EN */
+		gpio = <&gpio0 26 0>;
+		enable-active-high;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		//pinctrl-0 = <&user_leds_s0>;
+		pinctrl-0 = <&user_leds_s0 &bt_pins>;
+
+		compatible = "gpio-leds";
+
+		led2 {
+			label = "beaglebone:green:usr0";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "beaglebone:green:usr1";
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		led5 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		wl18xx_bt_en: led7 {
+			label = "wl18xx_bt_en";
+			gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+		>;
+	};
+
+	bt_pins: pinmux_bt_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad12.gpio1_28 BT_EN */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad12.mmc2_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad13.mmc2_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad14.mmc2_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad15.mmc2_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_csn3.mmc2_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_clk.mmc2_clk */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gmii1_rxd3.uart3_rxd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* gmii1_rxd2.uart3_txd */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3)		/* mdio_data.uart3_ctsn */
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* mdio_clk.uart3_rtsn */
+		>;
+	};
+
+	wl18xx_pins: pinmux_wl18xx_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad10.gpio0_26 WL_EN */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad11.gpio0_27 WL_IRQ */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_csn0.gpio1_29 LS_BUF_EN */
+		>;
+	};
+};
+
+&mac {
+	status = "disabled";
+};
+
+&mmc3 {
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
+	dma-names = "tx", "rx";
+	status = "okay";
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <27 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins &bt_pins>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1835-st";
+		enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&gpio1 {
+	ls-buf-en-hog {
+		gpio-hog;
+		gpios = <29 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LS_BUF_EN";
+	};
+};
+
+/* BT_AUD_OUT from wl1835 has to be pulled low when WL_EN is activated.*/
+/* in case it isn't, wilink8 ends up in one of the test modes that     */
+/* intruces various issues (elp wkaeup timeouts etc.)                  */
+/* On the BBGW this pin is routed through the level shifter (U21) that */
+/* introduces a pullup on the line and wilink8 ends up in a bad state. */
+/* use a gpio hog to force this pin low. An alternative may be adding  */
+/* an external pulldown on U21 pin 4.                                  */
+
+&gpio3 {
+	bt-aud-in-hog {
+		gpio-hog;
+		gpios = <16 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "MCASP0_AHCLKR";
+	};
+};
diff --git a/arch/arm/boot/dts/overlays/BB-BONE-4D5R-01-00A1.dts b/arch/arm/boot/dts/overlays/BB-BONE-4D5R-01-00A1.dts
new file mode 100644
index 000000000..2c3a82b7a
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/BB-BONE-4D5R-01-00A1.dts
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+
+/*
+ * Helper to show loaded overlays under: /proc/device-tree/chosen/overlays/
+ */
+&{/chosen} {
+	overlays {
+		BB-BONE-4D5R-01-00A1.kernel = __TIMESTAMP__;
+	};
+};
+
+/*
+ * Free up the pins used by the cape from the pinmux helpers.
+ */
+&ocp {
+	P8_45_pinmux { status = "disabled"; };	/* lcd: lcd_data0 */
+	P8_46_pinmux { status = "disabled"; };	/* lcd: lcd_data1 */
+	P8_43_pinmux { status = "disabled"; };	/* lcd: lcd_data2 */
+	P8_44_pinmux { status = "disabled"; };	/* lcd: lcd_data3 */
+	P8_41_pinmux { status = "disabled"; };	/* lcd: lcd_data4 */
+	P8_42_pinmux { status = "disabled"; };	/* lcd: lcd_data5 */
+	P8_39_pinmux { status = "disabled"; };	/* lcd: lcd_data6 */
+	P8_40_pinmux { status = "disabled"; };	/* lcd: lcd_data7 */
+	P8_37_pinmux { status = "disabled"; };	/* lcd: lcd_data8 */
+	P8_38_pinmux { status = "disabled"; };	/* lcd: lcd_data9 */
+	P8_36_pinmux { status = "disabled"; };	/* lcd: lcd_data10 */
+	P8_34_pinmux { status = "disabled"; };	/* lcd: lcd_data11 */
+	P8_35_pinmux { status = "disabled"; };	/* lcd: lcd_data12 */
+	P8_33_pinmux { status = "disabled"; };	/* lcd: lcd_data13 */
+	P8_31_pinmux { status = "disabled"; };	/* lcd: lcd_data14 */
+	P8_32_pinmux { status = "disabled"; };	/* lcd: lcd_data15 */
+
+	P8_27_pinmux { status = "disabled"; };	/* lcd: lcd_vsync */
+	P8_29_pinmux { status = "disabled"; };	/* lcd: lcd_hsync */
+	P8_28_pinmux { status = "disabled"; };	/* lcd: lcd_pclk */
+	P8_30_pinmux { status = "disabled"; };	/* lcd: lcd_ac_bias_en */
+
+	P9_27_pinmux { status = "disabled"; };	/* lcd: gpio3_19 DISPEN */
+
+	P9_14_pinmux { status = "disabled"; };	/* pwm: ehrpwm1a PWM_BL */
+
+	P9_18_pinmux { status = "disabled"; };	/* i2c1_sda */
+	P9_17_pinmux { status = "disabled"; };	/* i2c1_scl */
+	P9_26_pinmux { status = "disabled"; };	/* touch interrupt on gpio0_14 */
+};
+
+&am33xx_pinmux {
+	bb_lcd_pwm_backlight_pins: pinmux_bb_lcd_pwm_backlight_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE6) /* gpmc_a2.ehrpwm1a, OMAP_MUX_MODE6 | AM33XX_PIN_OUTPUT */
+		>;
+	};
+
+	bb_lcd_lcd_pins: pinmux_bb_lcd_lcd_pins {
+		pinctrl-single,pins = <
+			/*LCD enable */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_OUTPUT, MUX_MODE7) /* mcasp0_fsr.gpio3_19, OUTPUT | MODE7  LCD DISEN */
+
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	bb_i2c1_pins: pinmux_bb_i2c1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE2) /* spi0_d1.i2c1_sda */
+			AM33XX_IOPAD(0x95C, PIN_INPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE2) /* spi0_cs0.i2c1_scl */
+		>;
+	};
+
+	ar1021_pins: pinmux_ar1021_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE7)
+		>;
+	};
+};
+
+&epwmss1 {
+	status = "okay";
+};
+
+&ehrpwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&bb_lcd_pwm_backlight_pins>;
+	status = "okay";
+};
+
+&lcdc {
+	status = "okay";
+
+	blue-and-red-wiring = "straight";
+
+	//FIXME - LCD doesn't init...
+	//port {
+	//	lcdc_0: endpoint@0 {
+	//		remote-endpoint = <&panel_0>;
+	//	};
+	//};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&bb_i2c1_pins>;
+
+	clock-frequency = <100000>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ar1021: ar1021@4d {
+		status = "okay";
+		compatible = "microchip,ar1021-i2c";
+		reg = <0x4d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ar1021_pins>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+
+		touchscreen-offset-x=<250>;
+		touchscreen-offset-y=<300>;
+
+		touchscreen-inverted-y;
+	};
+};
+
+&{/} {
+	backlight: backlight {
+		status = "okay";
+		compatible = "pwm-backlight";
+		pwms = <&ehrpwm1 0 500000 0>;
+		brightness-levels = <
+			0  1  2  3  4  5  6  7  8  9
+			10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29
+			30 31 32 33 34 35 36 37 38 39
+			40 41 42 43 44 45 46 47 48 49
+			50 51 52 53 54 55 56 57 58 59
+			60 61 62 63 64 65 66 67 68 69
+			70 71 72 73 74 75 76 77 78 79
+			80 81 82 83 84 85 86 87 88 89
+			90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <100>;
+	};
+
+	panel {
+		status = "okay";
+		compatible = "ti,tilcdc,panel";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bb_lcd_lcd_pins>;
+		backlight = <&backlight>;
+		enable-gpios = <&gpio3 19 0>;
+
+		//FIXME - LCD doesn't init...
+		//port {
+		//	panel_0: endpoint@0 {
+		//		remote-endpoint = <&lcdc_0>;
+		//	};
+		//};
+
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <16>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+
+		display-timings {
+			native-mode = <&timing0>;
+			/* Settings for ThreeFive S9700RTWV35TR / LCD7 cape: */
+			timing0: 800x480 {
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <40>;
+				hback-porch = <40>;
+				hsync-len = <48>;
+				vback-porch = <30>;
+				vfront-porch = <13>;
+				vsync-len = <3>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/overlays/BB-BONE-LCD4-01-00A1.dts b/arch/arm/boot/dts/overlays/BB-BONE-LCD4-01-00A1.dts
new file mode 100644
index 000000000..ad6beadcc
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/BB-BONE-LCD4-01-00A1.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+
+/*
+ * Helper to show loaded overlays under: /proc/device-tree/chosen/overlays/
+ */
+&{/chosen} {
+	overlays {
+		BB-BONE-LCD4-01-00A1.kernel = __TIMESTAMP__;
+	};
+};
+
+/*
+ * Free up the pins used by the cape from the pinmux helpers.
+ */
+&ocp {
+	P9_12_pinmux { status = "disabled"; };	/* P9_12: gpmc_ben1.gpio1_28, INPUT | PULLDIS | MODE7 */
+
+	P9_14_pinmux { status = "disabled"; };	/* P9_14: gpmc_a2.ehrpwm1a */
+
+	P9_27_pinmux { status = "disabled"; };	/* P9_27: mcasp0_fsr.gpio3_19 */
+
+	P8_45_pinmux { status = "disabled"; };	/* P8_45: lcd_data0.lcd_data0 */
+	P8_46_pinmux { status = "disabled"; };	/* P8_46: lcd_data1.lcd_data1 */
+	P8_43_pinmux { status = "disabled"; };	/* P8_43: lcd_data2.lcd_data2 */
+	P8_44_pinmux { status = "disabled"; };	/* P8_44: lcd_data3.lcd_data3 */
+	P8_41_pinmux { status = "disabled"; };	/* P8_41: lcd_data4.lcd_data4 */
+	P8_42_pinmux { status = "disabled"; };	/* P8_42: lcd_data5.lcd_data5 */
+	P8_39_pinmux { status = "disabled"; };	/* P8_39: lcd_data6.lcd_data6 */
+	P8_40_pinmux { status = "disabled"; };	/* P8_40: lcd_data7.lcd_data7 */
+	P8_37_pinmux { status = "disabled"; };	/* P8_37: lcd_data8.lcd_data8 */
+	P8_38_pinmux { status = "disabled"; };	/* P8_38: lcd_data9.lcd_data9 */
+	P8_36_pinmux { status = "disabled"; };	/* P8_36: lcd_data10.lcd_data10 */
+	P8_34_pinmux { status = "disabled"; };	/* P8_34: lcd_data11.lcd_data11 */
+	P8_35_pinmux { status = "disabled"; };	/* P8_35: lcd_data12.lcd_data12 */
+	P8_33_pinmux { status = "disabled"; };	/* P8_33: lcd_data13.lcd_data13 */
+	P8_31_pinmux { status = "disabled"; };	/* P8_31: lcd_data14.lcd_data14 */
+	P8_32_pinmux { status = "disabled"; };	/* P8_32: lcd_data15.lcd_data15 */
+
+	P8_27_pinmux { status = "disabled"; };	/* P8_27: lcd_vsync.lcd_vsync */
+	P8_29_pinmux { status = "disabled"; };	/* P8_29: lcd_hsync.lcd_hsync */
+	P8_28_pinmux { status = "disabled"; };	/* P8_28: lcd_pclk.lcd_pclk */
+	P8_30_pinmux { status = "disabled"; };	/* P8_30: lcd_ac_bias_en.lcd_ac_bias_en */
+
+	P9_15_pinmux { status = "disabled"; };	/* P9_15: gpmc_a0.gpio1_16 */
+	P9_23_pinmux { status = "disabled"; };	/* P9_23: gpmc_a1.gpio1_17 */
+	P9_16_pinmux { status = "disabled"; };	/* P9_16: gpmc_a3.gpio1_19 */
+	P9_30_pinmux { status = "disabled"; };	/* P9_30: mcasp0_axr0.gpio3_16 */
+	P9_24_pinmux { status = "disabled"; };	/* P9_24: uart1_txd.gpio0_15 */
+};
+
+&am33xx_pinmux {
+	bb_lcd_led_pins: pinmux_bb_lcd_led_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT, MUX_MODE7)	/* P9_12: gpmc_ben1.gpio1_28, INPUT | PULLDIS | MODE7 */
+		>;
+	};
+
+	bb_lcd_pwm_backlight_pins: pinmux_bb_lcd_pwm_backlight_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE6)	/* P9_14: gpmc_a2.ehrpwm1a */
+		>;
+	};
+
+	bb_lcd_lcd_pins: pinmux_bb_lcd_lcd_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* P9_27: mcasp0_fsr.gpio3_19 */
+
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	bb_lcd_keymap_pins: pinmux_bb_lcd_keymap_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT, MUX_MODE7)	/* P9_15: gpmc_a0.gpio1_16 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT, MUX_MODE7)	/* P9_23: gpmc_a1.gpio1_17 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT, MUX_MODE7)	/* P9_16: gpmc_a3.gpio1_19 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT, MUX_MODE7)	/* P9_30: mcasp0_axr0.gpio3_16 */
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE7)	/* P9_24: uart1_txd.gpio0_15 */
+		>;
+	};
+};
+
+&epwmss1 {
+	status = "okay";
+};
+
+&ehrpwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&bb_lcd_pwm_backlight_pins>;
+	status = "okay";
+};
+
+&lcdc {
+	status = "okay";
+
+	blue-and-red-wiring = "straight";
+
+	//FIXME - LCD doesn't init...
+	//port {
+	//	lcdc_0: endpoint@0 {
+	//		remote-endpoint = <&panel_0>;
+	//	};
+	//};
+};
+
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x00 0x11 0x22 0x33>;
+		ti,charge-delay = <0x400>;
+	};
+
+	adc {
+		ti,adc-channels = <4 5 6 7>;
+	};
+};
+
+&{/} {
+	backlight: backlight {
+		status = "okay";
+		compatible = "pwm-backlight";
+		pwms = <&ehrpwm1 0 500000 0>;
+		brightness-levels = <
+			0  1  2  3  4  5  6  7  8  9
+			10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29
+			30 31 32 33 34 35 36 37 38 39
+			40 41 42 43 44 45 46 47 48 49
+			50 51 52 53 54 55 56 57 58 59
+			60 61 62 63 64 65 66 67 68 69
+			70 71 72 73 74 75 76 77 78 79
+			80 81 82 83 84 85 86 87 88 89
+			90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <100>;
+	};
+
+	panel {
+		status = "okay";
+		compatible = "ti,tilcdc,panel";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bb_lcd_lcd_pins>;
+		backlight = <&backlight>;
+
+		//FIXME - LCD doesn't init...
+		//port {
+		//	panel_0: endpoint@0 {
+		//		remote-endpoint = <&lcdc_0>;
+		//	};
+		//};
+
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <16>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+		display-timings {
+			native-mode = <&timing0>;
+			/* www.newhavendisplay.com/app_notes/OTA5180A.pdf */
+			timing0: 480x272 {
+				clock-frequency = <9200000>;
+				hactive = <480>;
+				vactive = <272>;
+				hfront-porch = <8>;
+				hback-porch = <47>;
+				hsync-len = <41>;
+				vback-porch = <2>;
+				vfront-porch = <3>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bb_lcd_led_pins>;
+
+		led-ld0 {
+			label = "lcd:green:usr0";
+			gpios = <&gpio1 28 0>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bb_lcd_keymap_pins>;
+
+		button-1 {
+			debounce_interval = <50>;
+			linux,code = <105>;
+			label = "left";
+			gpios = <&gpio1 16 0x1>;
+			gpio-key,wakeup;
+			autorepeat;
+		};
+		button-2 {
+			debounce_interval = <50>;
+			linux,code = <106>;
+			label = "right";
+			gpios = <&gpio1 17 0x1>;
+			gpio-key,wakeup;
+			autorepeat;
+		};
+		button-3 {
+			debounce_interval = <50>;
+			linux,code = <103>;
+			label = "up";
+			gpios = <&gpio1 19 0x1>;
+			gpio-key,wakeup;
+			autorepeat;
+		};
+		button-4 {
+			debounce_interval = <50>;
+			linux,code = <108>;
+			label = "down";
+			gpios = <&gpio3 16 0x1>;
+			gpio-key,wakeup;
+			autorepeat;
+		};
+		button-5 {
+			debounce_interval = <50>;
+			linux,code = <28>;
+			label = "enter";
+			gpios = <&gpio0 15 0x1>;
+			gpio-key,wakeup;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/overlays/BB-BONE-NH7C-01-A0.dts b/arch/arm/boot/dts/overlays/BB-BONE-NH7C-01-A0.dts
new file mode 100644
index 000000000..be9dfd135
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/BB-BONE-NH7C-01-A0.dts
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+
+/*
+ * Helper to show loaded overlays under: /proc/device-tree/chosen/overlays/
+ */
+&{/chosen} {
+	overlays {
+		BB-BONE-NH7C-01-A0.kernel = __TIMESTAMP__;
+	};
+};
+
+/*
+ * Free up the pins used by the cape from the pinmux helpers.
+ */
+&ocp {
+	P8_45_pinmux { status = "disabled"; };	/* lcd: lcd_data0 */
+	P8_46_pinmux { status = "disabled"; };	/* lcd: lcd_data1 */
+	P8_43_pinmux { status = "disabled"; };	/* lcd: lcd_data2 */
+	P8_44_pinmux { status = "disabled"; };	/* lcd: lcd_data3 */
+	P8_41_pinmux { status = "disabled"; };	/* lcd: lcd_data4 */
+	P8_42_pinmux { status = "disabled"; };	/* lcd: lcd_data5 */
+	P8_39_pinmux { status = "disabled"; };	/* lcd: lcd_data6 */
+	P8_40_pinmux { status = "disabled"; };	/* lcd: lcd_data7 */
+	P8_37_pinmux { status = "disabled"; };	/* lcd: lcd_data8 */
+	P8_38_pinmux { status = "disabled"; };	/* lcd: lcd_data9 */
+	P8_36_pinmux { status = "disabled"; };	/* lcd: lcd_data10 */
+	P8_34_pinmux { status = "disabled"; };	/* lcd: lcd_data11 */
+	P8_35_pinmux { status = "disabled"; };	/* lcd: lcd_data12 */
+	P8_33_pinmux { status = "disabled"; };	/* lcd: lcd_data13 */
+	P8_31_pinmux { status = "disabled"; };	/* lcd: lcd_data14 */
+	P8_32_pinmux { status = "disabled"; };	/* lcd: lcd_data15 */
+
+	P8_15_pinmux { status = "disabled"; };	/* gpmc_ad15.lcd_data16 */
+	P8_16_pinmux { status = "disabled"; };	/* gpmc_ad14.lcd_data17 */
+	P8_11_pinmux { status = "disabled"; };	/* gpmc_ad13.lcd_data18 */
+	P8_12_pinmux { status = "disabled"; };	/* gpmc_ad12.lcd_data19 */
+	P8_17_pinmux { status = "disabled"; };	/* gpmc_ad11.lcd_data20 */
+	P8_14_pinmux { status = "disabled"; };	/* gpmc_ad10.lcd_data21 */
+	P8_13_pinmux { status = "disabled"; };	/* gpmc_ad9.lcd_data22 */
+	P8_19_pinmux { status = "disabled"; };	/* gpmc_ad8.lcd_data23 */
+
+	P8_27_pinmux { status = "disabled"; };	/* lcd: lcd_vsync */
+	P8_29_pinmux { status = "disabled"; };	/* lcd: lcd_hsync */
+	P8_28_pinmux { status = "disabled"; };	/* lcd: lcd_pclk */
+	P8_30_pinmux { status = "disabled"; };	/* lcd: lcd_ac_bias_en */
+
+	P8_18_pinmux { status = "disabled"; };	/* lcd: enable */
+
+	P9_14_pinmux { status = "disabled"; };	/* pwm: ehrpwm1a */
+
+	P9_27_pinmux { status = "disabled"; };	/* ft5336: gpio3_15 */
+};
+
+&am33xx_pinmux {
+	bb_lcd_pwm_backlight_pins: pinmux_bb_lcd_pwm_backlight_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE6)	/* P9_14: gpmc_a2.ehrpwm1a */
+		>;
+	};
+
+	bb_lcd_lcd_pins: pinmux_bb_lcd_lcd_pins {
+		pinctrl-single,pins = <
+			/*LCD enable */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_clk_mux0.gpio2_1 */
+
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1)	/* P8_15: gpmc_ad15.lcd_data16 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1)	/* P8_16: gpmc_ad14.lcd_data17 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1)	/* P8_11: gpmc_ad13.lcd_data18 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1)	/* P8_12: gpmc_ad12.lcd_data19 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1)	/* P8_17: gpmc_ad11.lcd_data20 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1)	/* P8_14: gpmc_ad10.lcd_data21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1)	/* P8_13: gpmc_ad9.lcd_data22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1)	/* P8_19: gpmc_ad8.lcd_data23 */
+
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	edt_ft5x06_pins: pinmux_edt_ft5x06_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* mcasp0_fsr.gpio3_19 */
+		>;
+	};
+};
+
+&epwmss1 {
+	status = "okay";
+};
+
+&ehrpwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&bb_lcd_pwm_backlight_pins>;
+	status = "okay";
+};
+
+&lcdc {
+	status = "okay";
+
+	blue-and-red-wiring = "crossed";
+
+	//FIXME - LCD doesn't init...
+	//port {
+	//	lcdc_0: endpoint@0 {
+	//		remote-endpoint = <&panel_0>;
+	//	};
+	//};
+};
+
+&i2c2 {
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	edt-ft5x06@38 {
+		status = "okay";
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edt_ft5x06_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <19 0>;
+		//reset-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
+
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		//touchscreen-swapped-x-y;
+	};
+};
+
+&{/} {
+	backlight: backlight {
+		status = "okay";
+		compatible = "pwm-backlight";
+		pwms = <&ehrpwm1 0 500000 0>;
+		brightness-levels = <
+			0  1  2  3  4  5  6  7  8  9
+			10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29
+			30 31 32 33 34 35 36 37 38 39
+			40 41 42 43 44 45 46 47 48 49
+			50 51 52 53 54 55 56 57 58 59
+			60 61 62 63 64 65 66 67 68 69
+			70 71 72 73 74 75 76 77 78 79
+			80 81 82 83 84 85 86 87 88 89
+			90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <100>;
+	};
+
+	/* NHD-7.0-800480EF-ATXL# */
+	panel {
+		status = "okay";
+		compatible = "ti,tilcdc,panel";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bb_lcd_lcd_pins>;
+		backlight = <&backlight>;
+		enable-gpios = <&gpio2 1 0>;
+
+		//FIXME - LCD doesn't init...
+		//port {
+		//	panel_0: endpoint@0 {
+		//		remote-endpoint = <&lcdc_0>;
+		//	};
+		//};
+
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <32>;
+			fdd               = <0x80>;
+			tft-alt-mode      = <0>;
+			stn-565-mode      = <0>;
+			mono-8bit-mode    = <0>;
+			sync-edge         = <0>;
+			sync-ctrl         = <0>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 800x480 {
+				clock-frequency = <45000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <40>;
+				hback-porch = <40>;
+				hsync-len = <48>;
+				vback-porch = <29>;
+				vfront-porch = <13>;
+				vsync-len = <3>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/overlays/BB-BONE-eMMC1-01-00A0.dts b/arch/arm/boot/dts/overlays/BB-BONE-eMMC1-01-00A0.dts
new file mode 100644
index 000000000..edc70070f
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/BB-BONE-eMMC1-01-00A0.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+
+/*
+ * Helper to show loaded overlays under: /proc/device-tree/chosen/overlays/
+ */
+&{/chosen} {
+	overlays {
+		BB-BONE-eMMC1-01-00A0.kernel = __TIMESTAMP__;
+	};
+};
+
+/*
+ * Free up the pins used by the cape from the pinmux helpers.
+ */
+&ocp {
+	P8_21_pinmux { status = "disabled"; };	/* mmc1_clk */
+	P8_20_pinmux { status = "disabled"; };	/* mmc1_cmd */
+	P8_25_pinmux { status = "disabled"; };	/* mmc1_dat0 */
+	P8_24_pinmux { status = "disabled"; };	/* mmc1_dat1 */
+	P8_05_pinmux { status = "disabled"; };	/* mmc1_dat2 */
+	P8_06_pinmux { status = "disabled"; };	/* mmc1_dat3 */
+	P8_23_pinmux { status = "disabled"; };	/* mmc1_dat4 */
+	P8_22_pinmux { status = "disabled"; };	/* mmc1_dat5 */
+	P8_03_pinmux { status = "disabled"; };	/* mmc1_dat6 */
+	P8_04_pinmux { status = "disabled"; };	/* mmc1_dat7 */
+};
+
+&am33xx_pinmux {
+	emmc_pins: pinmux_emmc_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+		>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	status = "okay";
+	non-removable;
+};
diff --git a/arch/arm/boot/dts/overlays/BB-CAPE-DISP-CT4-00A0.dts b/arch/arm/boot/dts/overlays/BB-CAPE-DISP-CT4-00A0.dts
new file mode 100644
index 000000000..c47fa0b1f
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/BB-CAPE-DISP-CT4-00A0.dts
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+
+/*
+ * Helper to show loaded overlays under: /proc/device-tree/chosen/overlays/
+ */
+&{/chosen} {
+	overlays {
+		BB-CAPE-DISP-CT4-00A0.kernel = __TIMESTAMP__;
+	};
+};
+
+/*
+ * Free up the pins used by the cape from the pinmux helpers.
+ */
+&ocp {
+	P8_45_pinmux { status = "disabled"; };	/* lcd: lcd_data0 */
+	P8_46_pinmux { status = "disabled"; };	/* lcd: lcd_data1 */
+	P8_43_pinmux { status = "disabled"; };	/* lcd: lcd_data2 */
+	P8_44_pinmux { status = "disabled"; };	/* lcd: lcd_data3 */
+	P8_41_pinmux { status = "disabled"; };	/* lcd: lcd_data4 */
+	P8_42_pinmux { status = "disabled"; };	/* lcd: lcd_data5 */
+	P8_39_pinmux { status = "disabled"; };	/* lcd: lcd_data6 */
+	P8_40_pinmux { status = "disabled"; };	/* lcd: lcd_data7 */
+	P8_37_pinmux { status = "disabled"; };	/* lcd: lcd_data8 */
+	P8_38_pinmux { status = "disabled"; };	/* lcd: lcd_data9 */
+	P8_36_pinmux { status = "disabled"; };	/* lcd: lcd_data10 */
+	P8_34_pinmux { status = "disabled"; };	/* lcd: lcd_data11 */
+	P8_35_pinmux { status = "disabled"; };	/* lcd: lcd_data12 */
+	P8_33_pinmux { status = "disabled"; };	/* lcd: lcd_data13 */
+	P8_31_pinmux { status = "disabled"; };	/* lcd: lcd_data14 */
+	P8_32_pinmux { status = "disabled"; };	/* lcd: lcd_data15 */
+
+	P8_27_pinmux { status = "disabled"; };	/* lcd: lcd_vsync */
+	P8_29_pinmux { status = "disabled"; };	/* lcd: lcd_hsync */
+	P8_28_pinmux { status = "disabled"; };	/* lcd: lcd_pclk */
+	P8_30_pinmux { status = "disabled"; };	/* lcd: lcd_ac_bias_en */
+
+	P9_28_pinmux { status = "disabled"; };	/* pwm: eCAP2_in_PWM2_out */
+
+	P9_29_pinmux { status = "disabled"; };	/* ft5336: gpio3_15 */
+	P9_31_pinmux { status = "disabled"; };	/* ft5336: gpio3_14 */
+};
+
+&am33xx_pinmux {
+	bb_lcd_pwm_backlight_pins: pinmux_bb_lcd_pwm_backlight_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN,  MUX_MODE4) /* mcasp0_ahclkr.eCAP2_in_PWM2_out */
+		>;
+	};
+
+	bb_lcd_lcd_pins: pinmux_bb_lcd_lcd_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	edt_ft5336_ts_pins: pinmux_edt_ft5336_ts_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* mcasp0_fsx.gpio3_15 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* mcasp0_aclkx.gpio3_14 */
+		>;
+	};
+};
+
+&epwmss2 {
+	status = "okay";
+};
+
+&ecap2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&bb_lcd_pwm_backlight_pins>;
+	status = "okay";
+};
+
+&lcdc {
+	status = "okay";
+
+	blue-and-red-wiring = "straight";
+
+	//FIXME - LCD doesn't init...
+	//port {
+	//	lcdc_0: endpoint@0 {
+	//		remote-endpoint = <&panel_0>;
+	//	};
+	//};
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* this is the configuration part */
+	clock-frequency = <100000>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	edt-ft5336@38 {
+		status = "okay";
+		compatible = "edt,edt-ft5336", "edt,edt-ft5306", "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edt_ft5336_ts_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <15 0>;
+		reset-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
+
+		touchscreen-size-x = <272>;
+		touchscreen-size-y = <480>;
+		touchscreen-swapped-x-y;
+	};
+};
+
+&{/} {
+	backlight: backlight {
+		status = "okay";
+		compatible = "pwm-backlight";
+		pwms = <&ecap2 0 500000 0>;
+		brightness-levels = <
+			0  1  2  3  4  5  6  7  8  9
+			10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29
+			30 31 32 33 34 35 36 37 38 39
+			40 41 42 43 44 45 46 47 48 49
+			50 51 52 53 54 55 56 57 58 59
+			60 61 62 63 64 65 66 67 68 69
+			70 71 72 73 74 75 76 77 78 79
+			80 81 82 83 84 85 86 87 88 89
+			90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <50>;
+	};
+
+	panel {
+		status = "okay";
+		compatible = "ti,tilcdc,panel";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bb_lcd_lcd_pins>;
+		backlight = <&backlight>;
+
+		//FIXME - LCD doesn't init...
+		//port {
+		//	panel_0: endpoint@0 {
+		//		remote-endpoint = <&lcdc_0>;
+		//	};
+		//};
+
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <16>;
+			fdd               = <0x80>;
+			tft-alt-mode      = <0>;
+			stn-565-mode      = <0>;
+			mono-8bit-mode    = <0>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+		/* ILI6480 */
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 480x272 {
+				clock-frequency = <9000000>;
+				hactive = <480>;
+				vactive = <272>;
+				hfront-porch = <5>;
+				hback-porch = <40>;
+				hsync-len = <1>;
+				vback-porch = <8>;
+				vfront-porch = <8>;
+				vsync-len = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/overlays/BB-HDMI-TDA998x-00A0.dts b/arch/arm/boot/dts/overlays/BB-HDMI-TDA998x-00A0.dts
new file mode 100644
index 000000000..1c0eaa743
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/BB-HDMI-TDA998x-00A0.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+#include <dt-bindings/display/tda998x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/*
+ * Helper to show loaded overlays under: /proc/device-tree/chosen/overlays/
+ */
+&{/chosen} {
+	overlays {
+		BB-HDMI-TDA998x-00A0.kernel = __TIMESTAMP__;
+	};
+};
+
+/*
+ * Free up the pins used by the cape from the pinmux helpers.
+ */
+&ocp {
+	P9_25_pinmux { status = "disabled"; };	/* mcasp0_ahclkx */
+	P9_28_pinmux { status = "disabled"; };	/* mcasp0_axr2 */
+	P9_29_pinmux { status = "disabled"; };	/* mcasp0_fsx */
+	P9_31_pinmux { status = "disabled"; };	/* mcasp0_aclkx */
+	P8_45_pinmux { status = "disabled"; };	/* lcd_data0 */
+	P8_46_pinmux { status = "disabled"; };	/* lcd_data1 */
+	P8_43_pinmux { status = "disabled"; };	/* lcd_data2 */
+	P8_44_pinmux { status = "disabled"; };	/* lcd_data3 */
+	P8_41_pinmux { status = "disabled"; };	/* lcd_data4 */
+	P8_42_pinmux { status = "disabled"; };	/* lcd_data5 */
+	P8_39_pinmux { status = "disabled"; };	/* lcd_data6 */
+	P8_40_pinmux { status = "disabled"; };	/* lcd_data7 */
+	P8_37_pinmux { status = "disabled"; };	/* lcd_data8 */
+	P8_38_pinmux { status = "disabled"; };	/* lcd_data9 */
+	P8_36_pinmux { status = "disabled"; };	/* lcd_data10 */
+	P8_34_pinmux { status = "disabled"; };	/* lcd_data11 */
+	P8_35_pinmux { status = "disabled"; };	/* lcd_data12 */
+	P8_33_pinmux { status = "disabled"; };	/* lcd_data13 */
+	P8_31_pinmux { status = "disabled"; };	/* lcd_data14 */
+	P8_32_pinmux { status = "disabled"; };	/* lcd_data15 */
+	P8_27_pinmux { status = "disabled"; };	/* lcd_vsync */
+	P8_29_pinmux { status = "disabled"; };	/* lcd_hsync */
+	P8_28_pinmux { status = "disabled"; };	/* lcd_pclk */
+	P8_30_pinmux { status = "disabled"; };	/* lcd_ac_bias_en */
+};
+
+&am33xx_pinmux {
+	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLUP, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	mcasp0_pins: mcasp0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
+		>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+
+	/* If you want to get 24 bit RGB and 16 BGR mode instead of
+	 * current 16 bit RGB and 24 BGR modes, set the propety
+	 * below to "crossed" and uncomment the video-ports -property
+	 * in tda19988 node.
+	 */
+	blue-and-red-wiring = "straight";
+
+	port {
+		lcdc_0: endpoint@0 {
+			remote-endpoint = <&hdmi_0>;
+		};
+	};
+};
+
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	tda19988: tda19988@70 {
+		compatible = "nxp,tda998x";
+		reg = <0x70>;
+		nxp,calib-gpios = <&gpio1 25 0>;
+		interrupts-extended = <&gpio1 25 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default", "off";
+		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
+		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
+
+		/* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
+		/* video-ports = <0x234501>; */
+
+		#sound-dai-cells = <0>;
+		audio-ports = <	TDA998x_I2S	0x03>;
+
+		ports {
+			port@0 {
+				hdmi_0: endpoint@0 {
+					remote-endpoint = <&lcdc_0>;
+				};
+			};
+		};
+	};
+};
+
+&mcasp0 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+	status = "okay";
+	op-mode = <0>;	/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 1 0
+		>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&{/} {
+	clk_mcasp0_fixed: clk_mcasp0_fixed {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24576000>;
+	};
+
+	clk_mcasp0: clk_mcasp0 {
+		#clock-cells = <0>;
+		compatible = "gpio-gate-clock";
+		clocks = <&clk_mcasp0_fixed>;
+		enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "TI BeagleBone Black";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink0_master>;
+		simple-audio-card,frame-master = <&dailink0_master>;
+
+		dailink0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+			clocks = <&clk_mcasp0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tda19988>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/overlays/BB-I2C2-BME680.dts b/arch/arm/boot/dts/overlays/BB-I2C2-BME680.dts
new file mode 100644
index 000000000..a16476a82
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/BB-I2C2-BME680.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Robert Nelson <robertcnelson@gmail.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/*
+ * Helper to show loaded overlays under: /proc/device-tree/chosen/overlays/
+ */
+&{/chosen} {
+	overlays {
+		BB-I2C2-BME680.kernel = __TIMESTAMP__;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bme680@76 {
+		status = "okay";
+		compatible = "bosch,bme680";
+		reg = <0x76>;
+	};
+};
diff --git a/arch/arm/boot/dts/overlays/BB-SPIDEV0-00A0.dts b/arch/arm/boot/dts/overlays/BB-SPIDEV0-00A0.dts
new file mode 100644
index 000000000..7992c1d5c
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/BB-SPIDEV0-00A0.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 CircuitCo
+ * Virtual cape for SPI0 on connector pins P9.22 P9.21 P9.18 P9.17
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/*
+ * Helper to show loaded overlays under: /proc/device-tree/chosen/overlays/
+ */
+&{/chosen} {
+	overlays {
+		BB-SPIDEV0-00A0.kernel = __TIMESTAMP__;
+	};
+};
+
+/*
+ * Free up the pins used by the cape from the pinmux helpers.
+ */
+&ocp {
+	P9_17_pinmux { status = "disabled"; };	/* P9_17 (A16) spi0_cs0.spi0_cs0 */
+	P9_18_pinmux { status = "disabled"; };	/* P9_18 (B16) spi0_d1.spi0_d1 */
+	P9_21_pinmux { status = "disabled"; };	/* P9_21 (B17) spi0_d0.spi0_d0 */
+	P9_22_pinmux { status = "disabled"; };	/* P9_22 (A17) spi0_sclk.spi0_sclk */
+};
+
+&am33xx_pinmux {
+	bb_spi0_pins: pinmux_bb_spi0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE0)	/* P9_22 (A17) spi0_sclk.spi0_sclk */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT, MUX_MODE0)	/* P9_21 (B17) spi0_d0.spi0_d0 */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE0)	/* P9_18 (B16) spi0_d1.spi0_d1 */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE0)	/* P9_17 (A16) spi0_cs0.spi0_cs0 */
+		>;
+	};
+};
+
+&spi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&bb_spi0_pins>;
+
+	/*
+	 * Select the D0 pin as output and D1 as
+	 * input. The default is D0 as input and
+	 * D1 as output.
+	 */
+	//ti,pindir-d0-out-d1-in;
+
+	channel@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "spidev";
+		symlink = "bone/spi/0.0";
+
+		reg = <0>;
+		spi-max-frequency = <16000000>;
+		spi-cpha;
+	};
+
+	channel@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "spidev";
+		symlink = "bone/spi/0.1";
+
+		reg = <1>;
+		spi-max-frequency = <16000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/overlays/BB-SPIDEV1-00A0.dts b/arch/arm/boot/dts/overlays/BB-SPIDEV1-00A0.dts
new file mode 100644
index 000000000..4fc2a1ed2
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/BB-SPIDEV1-00A0.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 CircuitCo
+ * Virtual cape for SPI1 on connector pins P9.29 P9.31 P9.30 P9.28
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/*
+ * Helper to show loaded overlays under: /proc/device-tree/chosen/overlays/
+ */
+&{/chosen} {
+	overlays {
+		BB-SPIDEV1-00A0.kernel = __TIMESTAMP__;
+	};
+};
+
+/*
+ * Free up the pins used by the cape from the pinmux helpers.
+ */
+&ocp {
+	P9_28_pinmux { status = "disabled"; };	/* P9_28 (C12) mcasp0_ahclkr.spi1_cs0 */
+	P9_30_pinmux { status = "disabled"; };	/* P9_30 (D12) mcasp0_axr0.spi1_d1 */
+	P9_29_pinmux { status = "disabled"; };	/* P9_29 (B13) mcasp0_fsx.spi1_d0 */
+	P9_31_pinmux { status = "disabled"; };	/* P9_31 (A13) mcasp0_aclkx.spi1_sclk */
+};
+
+&am33xx_pinmux {
+	bb_spi1_pins: pinmux_bb_spi1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT, MUX_MODE3)	/* P9_31 (A13) mcasp0_aclkx.spi1_sclk */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT, MUX_MODE3)	/* P9_29 (B13) mcasp0_fsx.spi1_d0 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT, MUX_MODE3)	/* P9_30 (D12) mcasp0_axr0.spi1_d1 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_INPUT, MUX_MODE3)	/* P9_28 (C12) mcasp0_ahclkr.spi1_cs0 */
+		>;
+	};
+};
+
+&spi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&bb_spi1_pins>;
+
+	/*
+	 * Select the D0 pin as output and D1 as
+	 * input. The default is D0 as input and
+	 * D1 as output.
+	 */
+	//ti,pindir-d0-out-d1-in;
+
+	channel@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "spidev";
+		symlink = "bone/spi/1.0";
+
+		reg = <0>;
+		spi-max-frequency = <16000000>;
+		spi-cpha;
+	};
+
+	channel@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "spidev";
+		symlink = "bone/spi/1.1";
+
+		reg = <1>;
+		spi-max-frequency = <16000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/overlays/BB-W1-P9.12-00A0.dts b/arch/arm/boot/dts/overlays/BB-W1-P9.12-00A0.dts
new file mode 100644
index 000000000..8b7277b29
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/BB-W1-P9.12-00A0.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Robert Nelson <robertcnelson@gmail.com>
+ * Virtual cape for onewire on connector pin P9.12
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+
+/*
+ * Helper to show loaded overlays under: /proc/device-tree/chosen/overlays/
+ */
+&{/chosen} {
+	overlays {
+		BB-W1-P9.12-00A0.kernel = __TIMESTAMP__;
+	};
+};
+
+/*
+ * Free up the pins used by the cape from the pinmux helpers.
+ */
+&ocp {
+	P9_12_pinmux { status = "disabled"; };	/* P9_12 (U18) gpmc_be1n.gpio1_28 */
+};
+
+&am33xx_pinmux {
+	bb_dallas_w1_pins: pinmux_bb_dallas_w1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE7)	/* P9_12 (U18) gpmc_be1n.gpio1_28 */
+		>;
+	};
+};
+
+&{/} {
+	onewire {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bb_dallas_w1_pins>;
+
+		compatible = "w1-gpio";
+		gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/overlays/BBORG_COMMS-00A2.dts b/arch/arm/boot/dts/overlays/BBORG_COMMS-00A2.dts
new file mode 100644
index 000000000..01b7f537f
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/BBORG_COMMS-00A2.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012,2019 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2015 Robert Nelson <robertcnelson@gmail.com>
+ * Copyright (C) 2015 Sebastian Jegerås
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/pinctrl/am33xx.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/*
+ * Helper to show loaded overlays under: /proc/device-tree/chosen/overlays/
+ */
+&{/chosen} {
+	overlays {
+		BBORG_COMMS-00A2.kernel = __TIMESTAMP__;
+	};
+};
+
+/*
+ * Free up the pins used by the cape from the pinmux helpers.
+ */
+&ocp {
+	P9_24_pinmux { status = "disabled"; };	/* P9_24: uart1_txd.d_can1_rx */
+	P9_26_pinmux { status = "disabled"; };	/* P9_26: uart1_rxd.d_can1_tx */
+	P9_13_pinmux { status = "disabled"; };	/* P9_13: gpmc_wpn.uart4_txd_mux2 */
+	P9_11_pinmux { status = "disabled"; };	/* P9_11: gpmc_wait0.uart4_rxd_mux2 */
+};
+
+&am33xx_pinmux {
+	bborg_comms_can_pins: pinmux_comms_can_pins {
+		pinctrl-single,pins = <
+			0x184 (PIN_INPUT_PULLUP | MUX_MODE2)	/* P9_24: uart1_txd.d_can1_rx */
+			0x180 (PIN_OUTPUT_PULLUP | MUX_MODE2)	/* P9_26: uart1_rxd.d_can1_tx */
+		>;
+	};
+
+	bborg_comms_rs485_pins: pinmux_comms_rs485_pins {
+		pinctrl-single,pins = <
+			0x074 (PIN_OUTPUT | MUX_MODE6)	/* P9_13: gpmc_wpn.uart4_txd_mux2 */
+			0x070 (PIN_INPUT  | MUX_MODE6)	/* P9_11: gpmc_wait0.uart4_rxd_mux2 */
+		>;
+	};
+};
+
+&dcan1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&bborg_comms_can_pins>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&bborg_comms_rs485_pins>;
+	//rs485-rts-delay = <0 0>;
+	//rts-gpio = <&gpio3 19 1>; /*  GPIO_ACTIVE_HIGH>; */
+	//rs485-rts-active-high;
+	//linux,rs485-enabled-at-boot-time;
+};
diff --git a/arch/arm/boot/dts/overlays/BBORG_FAN-A000.dts b/arch/arm/boot/dts/overlays/BBORG_FAN-A000.dts
new file mode 100644
index 000000000..ab426ff6f
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/BBORG_FAN-A000.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Robert Nelson <robercnelson@gmail.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/*
+ * Helper to show loaded overlays under: /proc/device-tree/chosen/overlays/
+ */
+&{/chosen} {
+	overlays {
+		BBORG_FAN-A000.kernel = __TIMESTAMP__;
+	};
+};
+
+/* From dra7.dtsi opp_nom-1000000000 */
+&cpu0_opp_table {
+	opp_slow-500000000 {
+		opp-hz = /bits/ 64 <1000000000>;
+		opp-microvolt = <1060000 850000 1150000>,
+				<1060000 850000 1150000>;
+		opp-supported-hw = <0xFF 0x01>;
+		opp-suspend;
+	};
+};
diff --git a/arch/arm/boot/dts/overlays/BBORG_RELAY-00A2.dts b/arch/arm/boot/dts/overlays/BBORG_RELAY-00A2.dts
new file mode 100644
index 000000000..75965b9d8
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/BBORG_RELAY-00A2.dts
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Robert Nelson <robertcnelson@gmail.com>
+ * Copyright (C) 2019 Amilcar Lucas <amilcar.lucas@iav.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+
+/*
+ * Helper to show loaded overlays under: /proc/device-tree/chosen/overlays/
+ */
+&{/chosen} {
+	overlays {
+		BBORG_RELAY-00A2.kernel = __TIMESTAMP__;
+	};
+};
+
+/*
+ * Free up the pins used by the cape from the pinmux helpers.
+ */
+&ocp {
+	P9_41_pinmux { status = "disabled"; };	/* P9_41: gpmc_a0.gpio0_20 */
+	P9_42_pinmux { status = "disabled"; };	/* P9_42: gpmc_a1.gpio0_07 */
+	P9_30_pinmux { status = "disabled"; };	/* P9_30: gpmc_be1n.gpio3_16 */
+	P9_27_pinmux { status = "disabled"; };	/* P9_27: mcasp0_fsr.gpio3_19 */
+};
+
+&am33xx_pinmux {
+	bb_gpio_relay_pins: pinmux_bb_gpio_relay_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* P9_41: Relay1 */
+			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* P9_42: Relay2 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_OUTPUT_PULLDOWN, MUX_MODE7)		/* P9_30: Relay3 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_OUTPUT_PULLDOWN, MUX_MODE7)		/* P9_27: Relay4 */
+		>;
+	};
+};
+
+&{/} {
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&bb_gpio_relay_pins>;
+
+		compatible = "gpio-leds";
+
+		jp@1 {
+			label = "relay-jp1";
+			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		jp@2 {
+			label = "relay-jp2";
+			gpios = <&gpio0 07 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		jp@3 {
+			label = "relay-jp3";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		jp@4 {
+			label = "relay-jp4";
+			gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/overlays/BONE-ADC.dts b/arch/arm/boot/dts/overlays/BONE-ADC.dts
new file mode 100644
index 000000000..dafd8a26f
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/BONE-ADC.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Deepak Khatri <deepaklorkhatri7@gmail.com>
+ * See Cape Interface Spec page for more info on Bone Buses
+ * https://elinux.org/Beagleboard:BeagleBone_cape_interface_spec
+ *
+ * Virtual cape for Bone ADC
+ */
+
+/dts-v1/;
+/plugin/;
+
+/*
+ * Helper to show loaded overlays under: /proc/device-tree/chosen/overlays/
+ */
+&{/chosen} {
+	overlays {
+		BONE-ADC.kernel = __TIMESTAMP__;
+	};
+};
+
+/*
+ * See these files for the phandles (&bone_*) and other bone bus nodes
+ * am335x-bbb-bone-buses.dtsi
+ */
+&bone_adc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/overlays/M-BB-BBG-00A0.dts b/arch/arm/boot/dts/overlays/M-BB-BBG-00A0.dts
new file mode 100644
index 000000000..aa938ade2
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/M-BB-BBG-00A0.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+/*
+ * Helper to show loaded overlays under: /proc/device-tree/chosen/overlays/
+ */
+&{/chosen} {
+	overlays {
+		M-BB-BBG-00A0.kernel = __TIMESTAMP__;
+	};
+};
+
+&{/} {
+	model = "TI AM335x BeagleBone Green";
+	compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
diff --git a/arch/arm/boot/dts/overlays/M-BB-BBGG-00A0.dts b/arch/arm/boot/dts/overlays/M-BB-BBGG-00A0.dts
new file mode 100644
index 000000000..6dc003082
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/M-BB-BBGG-00A0.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/*
+ * Helper to show loaded overlays under: /proc/device-tree/chosen/overlays/
+ */
+&{/chosen} {
+	overlays {
+		M-BB-BBGG-00A0.kernel = __TIMESTAMP__;
+	};
+};
+
+&{/} {
+	model = "SeeedStudio BeagleBone Green Gateway";
+};
diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile
new file mode 100644
index 000000000..97ad08dfd
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -0,0 +1,32 @@
+# Overlays for the BeagleBone platform
+
+dtbo-$(CONFIG_ARCH_OMAP2PLUS) += \
+	AM335X-PRU-UIO-00A0.dtbo	\
+	BB-ADC-00A0.dtbo	\
+	BB-BBBW-WL1835-00A0.dtbo	\
+	BB-BBGG-WL1835-00A0.dtbo	\
+	BB-BBGW-WL1835-00A0.dtbo	\
+	BB-BONE-4D5R-01-00A1.dtbo	\
+	BB-BONE-eMMC1-01-00A0.dtbo	\
+	BB-BONE-LCD4-01-00A1.dtbo	\
+	BB-BONE-NH7C-01-A0.dtbo	\
+	BB-CAPE-DISP-CT4-00A0.dtbo	\
+	BB-HDMI-TDA998x-00A0.dtbo	\
+	BB-I2C2-BME680.dtbo	\
+	BB-SPIDEV0-00A0.dtbo	\
+	BB-SPIDEV1-00A0.dtbo	\
+	BB-W1-P9.12-00A0.dtbo	\
+	BBORG_COMMS-00A2.dtbo	\
+	BBORG_FAN-A000.dtbo	\
+	BBORG_RELAY-00A2.dtbo	\
+	BONE-ADC.dtbo	\
+	M-BB-BBG-00A0.dtbo	\
+	M-BB-BBGG-00A0.dtbo	\
+	PB-MIKROBUS-0.dtbo	\
+	PB-MIKROBUS-1.dtbo
+
+targets += dtbs dtbs_install
+targets += $(dtbo-y)
+
+always-y	:= $(dtbo-y)
+clean-files	:= *.dtbo
diff --git a/arch/arm/boot/dts/overlays/PB-MIKROBUS-0.dts b/arch/arm/boot/dts/overlays/PB-MIKROBUS-0.dts
new file mode 100644
index 000000000..b516cf58c
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/PB-MIKROBUS-0.dts
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2020 Vaishnav M A, BeagleBoard.org Foundation.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+
+/*
+ * Helper to show loaded overlays under: /proc/device-tree/chosen/overlays/
+ */
+&{/chosen} {
+	overlays {
+		PB-MIKROBUS-0.kernel = __TIMESTAMP__;
+	};
+};
+
+/*
+ * Free up the pins used by the cape from the pinmux helpers.
+ */
+&ocp {
+	P2_01_pinmux { status = "disabled"; };
+	P2_03_pinmux { status = "disabled"; };
+	P2_05_pinmux { status = "disabled"; };
+	P2_07_pinmux { status = "disabled"; };
+	P2_09_pinmux { status = "disabled"; };
+	P2_11_pinmux { status = "disabled"; };
+	P1_12_pinmux { status = "disabled"; };
+	P1_10_pinmux { status = "disabled"; };
+	P1_08_pinmux { status = "disabled"; };
+	P1_06_pinmux { status = "disabled"; };
+	P1_04_pinmux { status = "disabled"; };
+	P1_02_pinmux { status = "disabled"; };
+};
+
+&{/} {
+	aliases {
+		mikrobus0 = "/mikrobus-0";
+	};
+
+	mikrobus-0 {
+		compatible = "linux,mikrobus";
+		status = "okay";
+		pinctrl-names = "default", "pwm_default", "pwm_gpio",
+				"uart_default", "uart_gpio", "i2c_default",
+				"i2c_gpio", "spi_default", "spi_gpio";
+		pinctrl-0 = <
+			&P2_03_gpio_input_pin
+			&P1_04_gpio_pin
+			&P1_02_gpio_pin
+		>;
+		pinctrl-1 = <&P2_01_pwm_pin>;
+		pinctrl-2 = <&P2_01_gpio_pin>;
+		pinctrl-3 = <
+			&P2_05_uart_pin
+			&P2_07_uart_pin
+		>;
+		pinctrl-4 = <
+			&P2_05_gpio_pin
+			&P2_07_gpio_pin
+		>;
+		pinctrl-5 = <
+			&P2_09_i2c_pin
+			&P2_11_i2c_pin
+		>;
+		pinctrl-6 = <
+			&P2_09_gpio_pin
+			&P2_11_gpio_pin
+		>;
+		pinctrl-7 = <
+			&P1_12_spi_pin
+			&P1_10_spi_pin
+			&P1_08_spi_sclk_pin
+			&P1_06_spi_cs_pin
+		>;
+		pinctrl-8 = <
+			&P1_12_gpio_pin
+			&P1_10_gpio_pin
+			&P1_08_gpio_pin
+			&P1_06_gpio_pin
+		>;
+		i2c-adapter = <&i2c1>;
+		spi-master = <0>;
+		spi-cs = <0 1>;
+		uart = <&uart4>;
+		pwms = <&ehrpwm1 0 500000 0>;
+		mikrobus-gpios = <&gpio1 18 0> , <&gpio0 23 0>,
+				 <&gpio0 30 0> , <&gpio0 31 0>,
+				 <&gpio0 15 0> , <&gpio0 14 0>,
+				 <&gpio0 4 0>  , <&gpio0 3 0>,
+				 <&gpio0 2 0>  , <&gpio0 5 0>,
+				 <&gpio2 25 0> , <&gpio2 3 0>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	channel@0{ status = "disabled"; };
+};
+
+&uart4 {
+	status = "okay";
+	force-empty-serdev-controller;
+};
diff --git a/arch/arm/boot/dts/overlays/PB-MIKROBUS-1.dts b/arch/arm/boot/dts/overlays/PB-MIKROBUS-1.dts
new file mode 100644
index 000000000..23236ee7c
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/PB-MIKROBUS-1.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2020 Vaishnav M A, BeagleBoard.org Foundation.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+
+/*
+ * Helper to show loaded overlays under: /proc/device-tree/chosen/overlays/
+ */
+&{/chosen} {
+	overlays {
+		PB-MIKROBUS-1 = __TIMESTAMP__;
+	};
+};
+
+/*
+ * Free up the pins used by the cape from the pinmux helpers.
+ */
+&ocp {
+	P1_36_pinmux { status = "disabled"; };
+	P1_34_pinmux { status = "disabled"; };
+	P1_32_pinmux { status = "disabled"; };
+	P1_30_pinmux { status = "disabled"; };
+	P1_28_pinmux { status = "disabled"; };
+	P1_26_pinmux { status = "disabled"; };
+	P2_25_pinmux { status = "disabled"; };
+	P2_27_pinmux { status = "disabled"; };
+	P2_29_pinmux { status = "disabled"; };
+	P2_31_pinmux { status = "disabled"; };
+	P2_33_pinmux { status = "disabled"; };
+	P2_35_pinmux { status = "disabled"; };
+};
+
+&{/} {
+	aliases {
+		mikrobus1 = "/mikrobus-1";
+	};
+
+	mikrobus-1 {
+		compatible = "linux,mikrobus";
+		status = "okay";
+		pinctrl-names = "default", "pwm_default", "pwm_gpio",
+				"uart_default", "uart_gpio", "i2c_default",
+				"i2c_gpio", "spi_default", "spi_gpio";
+		pinctrl-0 = <
+			&P1_34_gpio_input_pin
+			&P2_33_gpio_pin
+			&P2_35_gpio_pin
+		>;
+		pinctrl-1 = <&P1_36_pwm_pin>;
+		pinctrl-2 = <&P1_36_gpio_pin>;
+		pinctrl-3 = <
+			&P1_32_uart_pin
+			&P1_30_uart_pin
+		>;
+		pinctrl-4 = <
+			&P1_32_gpio_pin
+			&P1_30_gpio_pin
+		>;
+		pinctrl-5 = <
+			&P1_26_i2c_pin
+			&P1_28_i2c_pin
+		>;
+		pinctrl-6 = <
+			&P1_26_gpio_pin
+			&P1_28_gpio_pin
+		>;
+		pinctrl-7 = <
+			&P2_25_spi_pin
+			&P2_27_spi_pin
+			&P2_29_spi_sclk_pin
+			&P2_31_spi_cs_pin
+		>;
+		pinctrl-8 = <
+			&P2_25_gpio_pin
+			&P2_27_gpio_pin
+			&P2_29_gpio_pin
+			&P2_31_gpio_pin
+		>;
+		i2c-adapter = <&i2c2>;
+		spi-master = <1>;
+		spi-cs = <1 2>;
+		uart = <&uart0>;
+		pwms = <&ehrpwm0 0 500000 0>;
+		mikrobus-gpios = <&gpio3 14 0> , <&gpio0 26 0>,
+				 <&gpio1 10 0> , <&gpio1 11 0>,
+				 <&gpio0 13 0> , <&gpio0 12 0>,
+				 <&gpio1 9 0>  , <&gpio1 8 0>,
+				 <&gpio0 7 0>  , <&gpio0 19 0>,
+				 <&gpio1 13 0> , <&gpio2 22 0>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	channel@0{ status = "disabled"; };
+	channel@1{ status = "disabled"; };
+};
+
+&uart0 {
+	status = "okay";
+	force-empty-serdev-controller;
+};
diff --git a/drivers/Makefile b/drivers/Makefile
index a110338c8..69b8bdfc9 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -56,6 +56,9 @@ obj-$(CONFIG_RESET_CONTROLLER)	+= reset/
 obj-y				+= tty/
 obj-y				+= char/
 
+# put mmc early as many morden devices use emm/sd card as rootfs storage
+obj-y				+= mmc/
+
 # iommu/ comes before gpu as gpu are using iommu controllers
 obj-y				+= iommu/
 
@@ -127,7 +130,6 @@ obj-$(CONFIG_EISA)		+= eisa/
 obj-$(CONFIG_PM_OPP)		+= opp/
 obj-$(CONFIG_CPU_FREQ)		+= cpufreq/
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle/
-obj-y				+= mmc/
 obj-$(CONFIG_MEMSTICK)		+= memstick/
 obj-$(CONFIG_NEW_LEDS)		+= leds/
 obj-$(CONFIG_INFINIBAND)	+= infiniband/
diff --git a/drivers/gnss/serial.c b/drivers/gnss/serial.c
index 5d8e9bfb2..33a37be78 100644
--- a/drivers/gnss/serial.c
+++ b/drivers/gnss/serial.c
@@ -110,10 +110,9 @@ static int gnss_serial_set_power(struct gnss_serial *gserial,
 static int gnss_serial_parse_dt(struct serdev_device *serdev)
 {
 	struct gnss_serial *gserial = serdev_device_get_drvdata(serdev);
-	struct device_node *node = serdev->dev.of_node;
 	u32 speed = 4800;
 
-	of_property_read_u32(node, "current-speed", &speed);
+	device_property_read_u32(&serdev->dev, "current-speed", &speed);
 
 	gserial->speed = speed;
 
diff --git a/drivers/gnss/ubx.c b/drivers/gnss/ubx.c
index c951be202..2dcd6b7b9 100644
--- a/drivers/gnss/ubx.c
+++ b/drivers/gnss/ubx.c
@@ -138,6 +138,14 @@ static const struct of_device_id ubx_of_match[] = {
 MODULE_DEVICE_TABLE(of, ubx_of_match);
 #endif
 
+static const struct serdev_device_id ubx_serdev_id[] = {
+	{ "neo-6m", },
+	{ "neo-8", },
+	{ "neo-m8", },
+	{}
+};
+MODULE_DEVICE_TABLE(serdev, ubx_serdev_id);
+
 static struct serdev_device_driver ubx_driver = {
 	.driver	= {
 		.name		= "gnss-ubx",
@@ -146,6 +154,7 @@ static struct serdev_device_driver ubx_driver = {
 	},
 	.probe	= ubx_probe,
 	.remove	= ubx_remove,
+	.id_table = ubx_serdev_id,
 };
 module_serdev_device_driver(ubx_driver);
 
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 1c211b4c6..b175cb929 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -95,6 +95,20 @@ config GPIO_CDEV_V1
 
 	  If unsure, say Y.
 
+config GPIO_OF_HELPER
+	bool "GPIO OF helper device (EXPERIMENTAL)"
+	depends on OF_GPIO
+	help
+	  Say Y here to add an GPIO OF helper driver
+
+	  Allows you specify a GPIO helper based on OF
+	  which allows simple export of GPIO functionality
+	  in user-space.
+
+	  Features include, value set/get, direction control,
+	  interrupt/value change poll support, event counting
+	  and others.
+
 config GPIO_GENERIC
 	depends on HAS_IOMEM # Only for IOMEM drivers
 	tristate
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index edbaa3cb3..d2f367e0a 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_OF_GPIO)		+= gpiolib-of.o
 obj-$(CONFIG_GPIO_CDEV)		+= gpiolib-cdev.o
 obj-$(CONFIG_GPIO_SYSFS)	+= gpiolib-sysfs.o
 obj-$(CONFIG_GPIO_ACPI)		+= gpiolib-acpi.o
+obj-$(CONFIG_GPIO_OF_HELPER)	+= gpio-of-helper.o
 
 # Device drivers. Generally keep list sorted alphabetically
 obj-$(CONFIG_GPIO_REGMAP)	+= gpio-regmap.o
diff --git a/drivers/gpio/gpio-of-helper.c b/drivers/gpio/gpio-of-helper.c
new file mode 100644
index 000000000..21af24aea
--- /dev/null
+++ b/drivers/gpio/gpio-of-helper.c
@@ -0,0 +1,422 @@
+/*
+ * GPIO OF based helper
+ *
+ * A simple DT based driver to provide access to GPIO functionality
+ * to user-space via sysfs.
+ *
+ * Copyright (C) 2013 Pantelis Antoniou <panto@antoniou-consulting.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/atomic.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/math64.h>
+#include <linux/atomic.h>
+#include <linux/idr.h>
+
+/* fwd decl. */
+struct gpio_of_helper_info;
+
+enum gpio_type {
+	GPIO_TYPE_INPUT = 0,
+	GPIO_TYPE_OUTPUT = 1,
+};
+
+struct gpio_of_entry {
+	int id;
+	struct gpio_of_helper_info *info;
+	struct device_node *node;
+	enum gpio_type type;
+	int gpio;
+	int irq;
+	const char *name;
+	atomic64_t counter;
+	unsigned int count_flags;
+#define COUNT_RISING_EDGE	(1 << 0)
+#define COUNT_FALLING_EDGE	(1 << 1)
+};
+
+struct gpio_of_helper_info {
+	struct platform_device *pdev;
+	struct idr idr;
+};
+
+static const struct of_device_id gpio_of_helper_of_match[] = {
+	{
+		.compatible = "gpio-of-helper",
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, gpio_of_helper_of_match);
+
+static ssize_t gpio_of_helper_show_status(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct gpio_of_helper_info *info = platform_get_drvdata(pdev);
+	struct gpio_of_entry *entry;
+	char *p, *e;
+	int id, n;
+
+	p = buf;
+	e = p + PAGE_SIZE;
+	n = 0;
+	idr_for_each_entry(&info->idr, entry, id) {
+		switch (entry->type) {
+		case GPIO_TYPE_INPUT:
+			n = snprintf(p, e - p, "%2d %-24s %3d %-3s %llu\n",
+				entry->id, entry->name, entry->gpio, "IN",
+				(unsigned long long)
+					atomic64_read(&entry->counter));
+			break;
+		case GPIO_TYPE_OUTPUT:
+			n = snprintf(p, e - p, "%2d %-24s %3d %-3s\n",
+				entry->id, entry->name, entry->gpio, "OUT");
+			break;
+		}
+		p += n;
+	}
+
+	return p - buf;
+}
+
+static DEVICE_ATTR(status, S_IRUGO,
+		gpio_of_helper_show_status, NULL);
+
+static irqreturn_t gpio_of_helper_handler(int irq, void *ptr)
+{
+	struct gpio_of_entry *entry = ptr;
+
+	/* caution - low speed interfaces only! */
+	atomic64_inc(&entry->counter);
+
+	return IRQ_HANDLED;
+}
+
+static struct gpio_of_entry *
+gpio_of_entry_create(struct gpio_of_helper_info *info,
+		struct device_node *node)
+{
+	struct platform_device *pdev = info->pdev;
+	struct device *dev = &pdev->dev;
+	struct gpio_of_entry *entry;
+	int err, gpio, irq;
+	unsigned int req_flags, count_flags, irq_flags;
+	enum gpio_type type;
+	enum of_gpio_flags gpio_flags;
+	const char *name;
+
+	/* get the type of the node first */
+	if (of_property_read_bool(node, "input"))
+		type = GPIO_TYPE_INPUT;
+	else if (of_property_read_bool(node, "output")
+			|| of_property_read_bool(node, "init-low")
+			|| of_property_read_bool(node, "init-high"))
+		type = GPIO_TYPE_OUTPUT;
+	else {
+		dev_err(dev, "Not valid gpio node type\n");
+		err = -EINVAL;
+		goto err_bad_node;
+	}
+
+	/* get the name */
+	if (of_property_read_string(node, "line-name", &name))
+		if (of_property_read_string(node, "gpio-name", &name))
+			name = node->name;
+
+	err = of_get_named_gpio_flags(node, "gpio", 0, &gpio_flags);
+	if (IS_ERR_VALUE(err)) {
+		dev_err(dev, "Failed to get gpio property of '%s'\n", name);
+		goto err_bad_node;
+	}
+	gpio = err;
+
+	req_flags = 0;
+	count_flags = 0;
+
+	/* set the request flags */
+	switch (type) {
+		case GPIO_TYPE_INPUT:
+			req_flags = GPIOF_DIR_IN | GPIOF_EXPORT;
+			if (of_property_read_bool(node, "count-falling-edge"))
+				count_flags |= COUNT_FALLING_EDGE;
+			if (of_property_read_bool(node, "count-rising-edge"))
+				count_flags |= COUNT_RISING_EDGE;
+			break;
+		case GPIO_TYPE_OUTPUT:
+			req_flags = GPIOF_DIR_OUT | GPIOF_EXPORT;
+			if (of_property_read_bool(node, "init-high"))
+				req_flags |= GPIOF_OUT_INIT_HIGH;
+			else if (of_property_read_bool(node, "init-low"))
+				req_flags |= GPIOF_OUT_INIT_LOW;
+			break;
+	}
+	if (of_property_read_bool(node, "dir-changeable"))
+		req_flags |= GPIOF_EXPORT_CHANGEABLE;
+	if (gpio_flags & OF_GPIO_ACTIVE_LOW)
+		req_flags |= GPIOF_ACTIVE_LOW;
+	if (gpio_flags & OF_GPIO_SINGLE_ENDED) {
+		if (gpio_flags & OF_GPIO_ACTIVE_LOW)
+			req_flags |= GPIOF_OPEN_DRAIN;
+		else
+			req_flags |= GPIOF_OPEN_SOURCE;
+	}
+
+	/* request the gpio */
+	err = devm_gpio_request_one(dev, gpio, req_flags, name);
+	if (err != 0) {
+		dev_err(dev, "Failed to request gpio '%s'\n", name);
+		goto err_bad_node;
+	}
+
+	irq = -1;
+	irq_flags = 0;
+
+	/* counter mode requested - need an interrupt */
+	if (count_flags != 0) {
+		irq = gpio_to_irq(gpio);
+		if (IS_ERR_VALUE(irq)) {
+			dev_err(dev, "Failed to request gpio '%s'\n", name);
+			goto err_bad_node;
+		}
+
+		if (count_flags & COUNT_RISING_EDGE)
+			irq_flags |= IRQF_TRIGGER_RISING;
+		if (count_flags & COUNT_FALLING_EDGE)
+			irq_flags |= IRQF_TRIGGER_FALLING;
+	}
+
+	idr_preload(GFP_KERNEL);
+
+	entry = devm_kzalloc(dev, sizeof(*entry), GFP_KERNEL);
+	if (entry == NULL) {
+		dev_err(dev, "Failed to allocate gpio entry of '%s'\n", name);
+		err = -ENOMEM;
+		goto err_no_mem;
+	}
+
+	entry->id = -1;
+	entry->info = info;
+	entry->node = of_node_get(node);	/* get node reference */
+	entry->type = type;
+	entry->gpio = gpio;
+	entry->irq = irq;
+	entry->name = name;
+
+	/* interrupt enable is last thing done */
+	if (irq >= 0) {
+		atomic64_set(&entry->counter, 0);
+		entry->count_flags = count_flags;
+		err = devm_request_irq(dev, irq, gpio_of_helper_handler,
+				irq_flags, name, entry);
+		if (err != 0) {
+			dev_err(dev, "Failed to request irq of '%s'\n", name);
+			goto err_no_irq;
+		}
+	}
+
+	err = idr_alloc(&info->idr, entry, 0, 0, GFP_NOWAIT);
+	if (err >= 0)
+		entry->id = err;
+
+	idr_preload_end();
+
+	if (err < 0) {
+		dev_err(dev, "Failed to idr_get_new  of '%s'\n", name);
+		goto err_fail_idr;
+	}
+
+	dev_info(dev, "Allocated GPIO id=%d name='%s'\n", entry->id, name);
+
+	return entry;
+
+err_fail_idr:
+	/* nothing to do */
+err_no_irq:
+	/* release node ref */
+	of_node_put(node);
+	/* nothing else needs to be done, devres handles it */
+err_no_mem:
+err_bad_node:
+	return ERR_PTR(err);
+}
+
+static int gpio_of_entry_destroy(struct gpio_of_entry *entry)
+{
+	struct gpio_of_helper_info *info = entry->info;
+	struct platform_device *pdev = info->pdev;
+	struct device *dev = &pdev->dev;
+
+	dev_dbg(dev, "Destroying GPIO id=%d\n", entry->id);
+
+	/* remove from the IDR */
+	idr_remove(&info->idr, entry->id);
+
+	/* remove node ref */
+	of_node_put(entry->node);
+
+	/* free gpio */
+	devm_gpio_free(dev, entry->gpio);
+
+	/* gree irq */
+	if (entry->irq >= 0)
+		devm_free_irq(dev, entry->irq, entry);
+
+	/* and free */
+	devm_kfree(dev, entry);
+
+	return 0;
+}
+
+static int gpio_of_helper_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct gpio_of_helper_info *info;
+	struct gpio_of_entry *entry;
+	struct device_node *pnode = pdev->dev.of_node;
+	struct device_node *cnode;
+	struct pinctrl *pinctrl;
+	int err;
+
+	/* we only support OF */
+	if (pnode == NULL) {
+		dev_err(&pdev->dev, "No platform of_node!\n");
+		return -ENODEV;
+	}
+
+	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+	if (IS_ERR(pinctrl)) {
+		/* special handling for probe defer */
+		if (PTR_ERR(pinctrl) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
+		dev_warn(&pdev->dev,
+			"pins are not configured from the driver\n");
+	}
+
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (info == NULL) {
+		dev_err(&pdev->dev, "Failed to allocate info\n");
+		err = -ENOMEM;
+		goto err_no_mem;
+	}
+	platform_set_drvdata(pdev, info);
+	info->pdev = pdev;
+
+	idr_init(&info->idr);
+
+	err = device_create_file(dev, &dev_attr_status);
+	if (err != 0) {
+		dev_err(dev, "Failed to create status sysfs attribute\n");
+		goto err_no_sysfs;
+	}
+
+	for_each_child_of_node(pnode, cnode) {
+		if (!of_device_is_available(cnode))
+			continue;
+
+		entry = gpio_of_entry_create(info, cnode);
+		if (IS_ERR_OR_NULL(entry)) {
+			dev_err(dev, "Failed to create gpio entry\n");
+			err = PTR_ERR(entry);
+			goto err_fail_entry;
+		}
+	}
+
+	dev_info(&pdev->dev, "ready\n");
+
+	return 0;
+err_fail_entry:
+	device_remove_file(&pdev->dev, &dev_attr_status);
+err_no_sysfs:
+err_no_mem:
+	return err;
+}
+
+static int gpio_of_helper_remove(struct platform_device *pdev)
+{
+	struct gpio_of_helper_info *info = platform_get_drvdata(pdev);
+	struct gpio_of_entry *entry;
+	int id;
+
+	dev_info(&pdev->dev, "removing\n");
+
+	device_remove_file(&pdev->dev, &dev_attr_status);
+
+	id = 0;
+	idr_for_each_entry(&info->idr, entry, id) {
+		/* destroy each and every one */
+		gpio_of_entry_destroy(entry);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int gpio_of_helper_runtime_suspend(struct device *dev)
+{
+	/* place holder */
+	return 0;
+}
+
+static int gpio_of_helper_runtime_resume(struct device *dev)
+{
+	/* place holder */
+	return 0;
+}
+
+static struct dev_pm_ops gpio_of_helper_pm_ops = {
+	SET_RUNTIME_PM_OPS(gpio_of_helper_runtime_suspend,
+			   gpio_of_helper_runtime_resume, NULL)
+};
+#define GPIO_OF_HELPER_PM_OPS (&gpio_of_helper_pm_ops)
+#else
+#define GPIO_OF_HELPER_PM_OPS NULL
+#endif /* CONFIG_PM */
+
+struct platform_driver gpio_of_helper_driver = {
+	.probe		= gpio_of_helper_probe,
+	.remove		= gpio_of_helper_remove,
+	.driver = {
+		.name		= "gpio-of-helper",
+		.owner		= THIS_MODULE,
+		.pm		= GPIO_OF_HELPER_PM_OPS,
+		.of_match_table	= gpio_of_helper_of_match,
+	},
+};
+
+module_platform_driver(gpio_of_helper_driver);
+
+MODULE_AUTHOR("Pantelis Antoniou <panto@antoniou-consulting.com>");
+MODULE_DESCRIPTION("GPIO OF Helper driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:gpio-of-helper");
diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c
index 44c1ad51b..d9452b932 100644
--- a/drivers/gpio/gpiolib-sysfs.c
+++ b/drivers/gpio/gpiolib-sysfs.c
@@ -38,10 +38,10 @@ static DEFINE_MUTEX(sysfs_lock);
 /*
  * /sys/class/gpio/gpioN... only for GPIOs that are exported
  *   /direction
- *      * MAY BE OMITTED if kernel won't allow direction changes
  *      * is read/write as "in" or "out"
  *      * may also be written as "high" or "low", initializing
  *        output value as specified ("out" implies "low")
+ *      * read-only if kernel won't allow direction changes
  *   /value
  *      * always readable, subject to hardware behavior
  *      * may be writable, as zero/nonzero
@@ -54,6 +54,8 @@ static DEFINE_MUTEX(sysfs_lock);
  *      * is read/write as zero/nonzero
  *      * also affects existing and subsequent "falling" and "rising"
  *        /edge configuration
+ *   /label
+ *      * descriptor label
  */
 
 static ssize_t direction_show(struct device *dev,
@@ -83,7 +85,9 @@ static ssize_t direction_store(struct device *dev,
 
 	mutex_lock(&data->mutex);
 
-	if (sysfs_streq(buf, "high"))
+	if (!data->direction_can_change)
+		status = -EPERM;
+	else if (sysfs_streq(buf, "high"))
 		status = gpiod_direction_output_raw(desc, 1);
 	else if (sysfs_streq(buf, "out") || sysfs_streq(buf, "low"))
 		status = gpiod_direction_output_raw(desc, 0);
@@ -355,6 +359,23 @@ static ssize_t active_low_store(struct device *dev,
 }
 static DEVICE_ATTR_RW(active_low);
 
+static ssize_t label_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct gpiod_data *data = dev_get_drvdata(dev);
+	struct gpio_desc *desc = data->desc;
+	ssize_t			status;
+
+	mutex_lock(&data->mutex);
+
+	status = sprintf(buf, "%s\n", desc->label);
+
+	mutex_unlock(&data->mutex);
+
+	return status;
+}
+static DEVICE_ATTR_RO(label);
+
 static umode_t gpio_is_visible(struct kobject *kobj, struct attribute *attr,
 			       int n)
 {
@@ -366,12 +387,15 @@ static umode_t gpio_is_visible(struct kobject *kobj, struct attribute *attr,
 
 	if (attr == &dev_attr_direction.attr) {
 		if (!show_direction)
-			mode = 0;
+			mode &= 0444;
 	} else if (attr == &dev_attr_edge.attr) {
 		if (gpiod_to_irq(desc) < 0)
 			mode = 0;
 		if (!show_direction && test_bit(FLAG_IS_OUT, &desc->flags))
 			mode = 0;
+	} else if (attr == &dev_attr_value.attr) {
+		if (!show_direction && !test_bit(FLAG_IS_OUT, &desc->flags))
+			mode &= 0444;
 	}
 
 	return mode;
@@ -382,6 +406,7 @@ static struct attribute *gpio_attrs[] = {
 	&dev_attr_edge.attr,
 	&dev_attr_value.attr,
 	&dev_attr_active_low.attr,
+	&dev_attr_label.attr,
 	NULL,
 };
 
@@ -395,6 +420,10 @@ static const struct attribute_group *gpio_groups[] = {
 	NULL
 };
 
+/* bwlegh, a second device in the same file... get out of my namespace! */
+#define dev_attr_label dev_attr_chip_label
+#define label_show chip_label_show
+
 /*
  * /sys/class/gpio/gpiochipN/
  *   /base ... matching gpio_chip.base (N)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 344e376b2..e3bf8334b 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1915,9 +1915,9 @@ static int gpiod_request_commit(struct gpio_desc *desc, const char *label)
 
 	if (test_and_set_bit(FLAG_REQUESTED, &desc->flags) == 0) {
 		desc_set_label(desc, label ? : "?");
-	} else {
-		ret = -EBUSY;
-		goto out_free_unlock;
+//	} else {
+//		ret = -EBUSY;
+//		goto out_free_unlock;
 	}
 
 	if (gc->request) {
diff --git a/drivers/input/misc/tps65218-pwrbutton.c b/drivers/input/misc/tps65218-pwrbutton.c
index f011447c4..e0c6deacc 100644
--- a/drivers/input/misc/tps65218-pwrbutton.c
+++ b/drivers/input/misc/tps65218-pwrbutton.c
@@ -36,7 +36,7 @@ struct tps6521x_data {
 static const struct tps6521x_data tps65217_data = {
 	.reg_status = TPS65217_REG_STATUS,
 	.pb_mask = TPS65217_STATUS_PB,
-	.name = "tps65217_pwrbutton",
+	.name = "tps65217_pwr_but",
 };
 
 static const struct tps6521x_data tps65218_data = {
diff --git a/drivers/input/touchscreen/ar1021_i2c.c b/drivers/input/touchscreen/ar1021_i2c.c
index dc6a85362..50ed71070 100644
--- a/drivers/input/touchscreen/ar1021_i2c.c
+++ b/drivers/input/touchscreen/ar1021_i2c.c
@@ -17,6 +17,7 @@
 
 #define AR1021_MAX_X	4095
 #define AR1021_MAX_Y	4095
+#define AR1021_MAX_PRESSURE 255
 
 #define AR1021_CMD	0x55
 
@@ -26,8 +27,29 @@ struct ar1021_i2c {
 	struct i2c_client *client;
 	struct input_dev *input;
 	u8 data[AR1021_TOUCH_PKG_SIZE];
+	bool invert_x;
+	bool invert_y;
+	bool swap_xy;
 };
 
+static bool ar1021_get_prop_u32(struct device *dev,
+				     const char *property,
+				     unsigned int default_value,
+				     unsigned int *value)
+{
+	u32 val;
+	int error;
+
+	error = device_property_read_u32(dev, property, &val);
+	if (error) {
+		*value = default_value;
+		return false;
+	}
+
+	*value = val;
+	return true;
+}
+
 static irqreturn_t ar1021_i2c_irq(int irq, void *dev_id)
 {
 	struct ar1021_i2c *ar1021 = dev_id;
@@ -49,9 +71,22 @@ static irqreturn_t ar1021_i2c_irq(int irq, void *dev_id)
 	x = ((data[2] & 0x1f) << 7) | (data[1] & 0x7f);
 	y = ((data[4] & 0x1f) << 7) | (data[3] & 0x7f);
 
-	input_report_abs(input, ABS_X, x);
-	input_report_abs(input, ABS_Y, y);
+	if (ar1021->invert_x)
+		x = AR1021_MAX_X - x;
+
+	if (ar1021->invert_y)
+		y = AR1021_MAX_Y - y;
+
+	if (ar1021->swap_xy) {
+		input_report_abs(input, ABS_X, y);
+		input_report_abs(input, ABS_Y, x);
+	} else {
+		input_report_abs(input, ABS_X, x);
+		input_report_abs(input, ABS_Y, y);
+	}
+
 	input_report_key(input, BTN_TOUCH, button);
+	input_report_abs(input, ABS_PRESSURE, AR1021_MAX_PRESSURE);
 	input_sync(input);
 
 out:
@@ -93,6 +128,8 @@ static int ar1021_i2c_probe(struct i2c_client *client,
 	struct ar1021_i2c *ar1021;
 	struct input_dev *input;
 	int error;
+	unsigned int offset_x, offset_y;
+	bool data_present;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
 		dev_err(&client->dev, "i2c_check_functionality error\n");
@@ -116,10 +153,44 @@ static int ar1021_i2c_probe(struct i2c_client *client,
 	input->open = ar1021_i2c_open;
 	input->close = ar1021_i2c_close;
 
+	ar1021->invert_x = device_property_read_bool(&client->dev, "touchscreen-inverted-x");
+	ar1021->invert_y = device_property_read_bool(&client->dev, "touchscreen-inverted-y");
+	ar1021->swap_xy = device_property_read_bool(&client->dev, "touchscreen-swapped-x-y");
+
+	data_present = ar1021_get_prop_u32(&client->dev,
+						"touchscreen-offset-x",
+						0,
+						&offset_x);
+
+	if (data_present)
+		dev_info(&client->dev, "touchscreen-offset-x: %d\n", offset_x);
+
+	data_present = ar1021_get_prop_u32(&client->dev,
+						"touchscreen-offset-y",
+						0,
+						&offset_y);
+
+	if (data_present)
+		dev_info(&client->dev, "touchscreen-offset-y: %d\n", offset_y);
+
 	__set_bit(INPUT_PROP_DIRECT, input->propbit);
-	input_set_capability(input, EV_KEY, BTN_TOUCH);
-	input_set_abs_params(input, ABS_X, 0, AR1021_MAX_X, 0, 0);
-	input_set_abs_params(input, ABS_Y, 0, AR1021_MAX_Y, 0, 0);
+	//input_set_capability(input, EV_KEY, BTN_TOUCH);
+
+	input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	if(ar1021->swap_xy)
+	{
+		input_set_abs_params(input, ABS_X, 0, AR1021_MAX_Y, 0, 0);
+		input_set_abs_params(input, ABS_Y, 0, AR1021_MAX_X, 0, 0);
+	}
+	else
+	{
+		input_set_abs_params(input, ABS_X, offset_x, AR1021_MAX_X-offset_x, 0, 0);
+		input_set_abs_params(input, ABS_Y, offset_y, AR1021_MAX_Y-offset_y, 0, 0);
+	}
+
+	input_set_abs_params(input, ABS_PRESSURE, 0, AR1021_MAX_PRESSURE, 0, 0);
 
 	input_set_drvdata(input, ar1021);
 
diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
index f2fb6a9a1..3c706721a 100644
--- a/drivers/input/touchscreen/ti_am335x_tsc.c
+++ b/drivers/input/touchscreen/ti_am335x_tsc.c
@@ -34,6 +34,7 @@
 #define ADCFSM_STEPID		0x10
 #define SEQ_SETTLE		275
 #define MAX_12BIT		((1 << 12) - 1)
+#define PRESSURE_MAX		1000
 
 #define TSC_IRQENB_MASK		(IRQENB_FIFO0THRES | IRQENB_EOS | IRQENB_HW_PEN)
 
@@ -242,6 +243,7 @@ static void titsc_read_coordinates(struct titsc *ts_dev,
 	for (i = 0; i < creads; i++) {
 		xvals[i] = titsc_readl(ts_dev, REG_FIFO0);
 		xvals[i] &= 0xfff;
+		pr_debug("i %d xval %d yval %d z1 %d z2 %d\n", i, xvals[i], yvals[i], *z1, *z2);
 	}
 
 	/*
@@ -320,13 +322,13 @@ static irqreturn_t titsc_irq(int irq, void *dev)
 			 * Resistance(touch) = x plate resistance *
 			 * x position/4096 * ((z2 / z1) - 1)
 			 */
-			z = z1 - z2;
+			z = z2 - z1;
 			z *= x;
 			z *= ts_dev->x_plate_resistance;
-			z /= z2;
+			z /= z1;
 			z = (z + 2047) >> 12;
-
-			if (z <= MAX_12BIT) {
+			pr_debug("x %d y %d z1 %d z2 %d z %d\n", x, y, z1, z2, z);
+			if (z <= PRESSURE_MAX) {
 				input_report_abs(input_dev, ABS_X, x);
 				input_report_abs(input_dev, ABS_Y, y);
 				input_report_abs(input_dev, ABS_PRESSURE, z);
@@ -467,6 +469,7 @@ static int titsc_probe(struct platform_device *pdev)
 	input_dev->name = "ti-tsc";
 	input_dev->dev.parent = &pdev->dev;
 
+	__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
 	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
 
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 0f5a49fc7..f11288aed 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -479,6 +479,7 @@ source "drivers/misc/altera-stapl/Kconfig"
 source "drivers/misc/mei/Kconfig"
 source "drivers/misc/vmw_vmci/Kconfig"
 source "drivers/misc/genwqe/Kconfig"
+source "drivers/misc/cape/Kconfig"
 source "drivers/misc/echo/Kconfig"
 source "drivers/misc/cxl/Kconfig"
 source "drivers/misc/ocxl/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index a086197af..eb58bc9a7 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_LATTICE_ECP3_CONFIG)	+= lattice-ecp3-config.o
 obj-$(CONFIG_SRAM)		+= sram.o
 obj-$(CONFIG_SRAM_EXEC)		+= sram-exec.o
 obj-$(CONFIG_GENWQE)		+= genwqe/
+obj-y				+= cape/
 obj-$(CONFIG_ECHO)		+= echo/
 obj-$(CONFIG_CXL_BASE)		+= cxl/
 obj-$(CONFIG_DW_XDATA_PCIE)	+= dw-xdata-pcie.o
diff --git a/drivers/misc/cape/Kconfig b/drivers/misc/cape/Kconfig
new file mode 100644
index 000000000..a2ef85e04
--- /dev/null
+++ b/drivers/misc/cape/Kconfig
@@ -0,0 +1,5 @@
+#
+# Capes
+#
+
+source "drivers/misc/cape/beaglebone/Kconfig"
diff --git a/drivers/misc/cape/Makefile b/drivers/misc/cape/Makefile
new file mode 100644
index 000000000..7c4eb96ab
--- /dev/null
+++ b/drivers/misc/cape/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for cape like devices
+#
+
+obj-y				+= beaglebone/
diff --git a/drivers/misc/cape/beaglebone/Kconfig b/drivers/misc/cape/beaglebone/Kconfig
new file mode 100644
index 000000000..eeb67828f
--- /dev/null
+++ b/drivers/misc/cape/beaglebone/Kconfig
@@ -0,0 +1,10 @@
+#
+# Beaglebone capes
+#
+
+config BEAGLEBONE_PINMUX_HELPER
+	tristate "Beaglebone Pinmux Helper"
+	depends on ARCH_OMAP2PLUS && OF
+	default n
+	help
+	  Say Y here to include support for the pinmux helper
diff --git a/drivers/misc/cape/beaglebone/Makefile b/drivers/misc/cape/beaglebone/Makefile
new file mode 100644
index 000000000..7f4617a01
--- /dev/null
+++ b/drivers/misc/cape/beaglebone/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for beaglebone capes
+#
+
+obj-$(CONFIG_BEAGLEBONE_PINMUX_HELPER)	+= bone-pinmux-helper.o
diff --git a/drivers/misc/cape/beaglebone/bone-pinmux-helper.c b/drivers/misc/cape/beaglebone/bone-pinmux-helper.c
new file mode 100644
index 000000000..57703d8bc
--- /dev/null
+++ b/drivers/misc/cape/beaglebone/bone-pinmux-helper.c
@@ -0,0 +1,242 @@
+/*
+ * Pinmux helper driver
+ *
+ * Copyright (C) 2013 Pantelis Antoniou <panto@antoniou-consulting.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/slab.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/consumer.h>
+
+static const struct of_device_id bone_pinmux_helper_of_match[] = {
+	{
+		.compatible = "bone-pinmux-helper",
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bone_pinmux_helper_of_match);
+
+struct pinmux_helper_data {
+	struct pinctrl *pinctrl;
+	char *selected_state_name;
+};
+
+static ssize_t pinmux_helper_show_state(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pinmux_helper_data *data = platform_get_drvdata(pdev);
+	const char *name;
+
+	name = data->selected_state_name;
+	if (name == NULL || strlen(name) == 0)
+		name = "none";
+	return sprintf(buf, "%s\n", name);
+}
+
+static ssize_t pinmux_helper_store_state(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pinmux_helper_data *data = platform_get_drvdata(pdev);
+	struct pinctrl_state *state;
+	char *state_name;
+	char *s;
+	int err;
+
+	/* duplicate (as a null terminated string) */
+	state_name = kmalloc(count + 1, GFP_KERNEL);
+	if (state_name == NULL)
+		return -ENOMEM;
+	memcpy(state_name, buf, count);
+	state_name[count] = '\0';
+
+	/* and chop off newline */
+	s = strchr(state_name, '\n');
+	if (s != NULL)
+		*s = '\0';
+
+	/* try to select default state at first (if it exists) */
+	state = pinctrl_lookup_state(data->pinctrl, state_name);
+	if (!IS_ERR(state)) {
+		err = pinctrl_select_state(data->pinctrl, state);
+		if (err != 0)
+			dev_err(dev, "Failed to select state %s\n",
+					state_name);
+	} else {
+		dev_err(dev, "Failed to find state %s\n", state_name);
+		err = PTR_ERR_OR_ZERO(state);
+	}
+
+	if (err == 0) {
+		kfree(data->selected_state_name);
+		data->selected_state_name = state_name;
+	}
+
+	return err ? err : count;
+}
+
+static DEVICE_ATTR(state, S_IWUSR | S_IRUGO,
+		   pinmux_helper_show_state, pinmux_helper_store_state);
+
+static struct attribute *pinmux_helper_attributes[] = {
+	&dev_attr_state.attr,
+	NULL
+};
+
+static const struct attribute_group pinmux_helper_attr_group = {
+	.attrs = pinmux_helper_attributes,
+};
+
+static int bone_pinmux_helper_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct pinmux_helper_data *data;
+	struct pinctrl_state *state;
+	char *state_name;
+	const char *mode_name;
+	int mode_len;
+	int err;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (data == NULL) {
+		dev_err(dev, "Failed to allocate data\n");
+		err = -ENOMEM;
+		goto err_no_mem;
+	}
+
+	state_name = kmalloc(strlen(PINCTRL_STATE_DEFAULT) + 1,
+			GFP_KERNEL);
+	if (state_name == NULL) {
+		dev_err(dev, "Failed to allocate state name\n");
+		err = -ENOMEM;
+		goto err_no_state_mem;
+	}
+	data->selected_state_name = state_name;
+	strcpy(data->selected_state_name, PINCTRL_STATE_DEFAULT);
+
+	platform_set_drvdata(pdev, data);
+
+	data->pinctrl = devm_pinctrl_get(dev);
+	if (IS_ERR(data->pinctrl)) {
+		dev_err(dev, "Failed to get pinctrl\n");
+		err = PTR_ERR_OR_ZERO(data->pinctrl);
+		goto err_no_pinctrl;
+	}
+
+	/* See if an initial mode is specified in the device tree */
+	mode_name = of_get_property(dev->of_node, "mode", &mode_len);
+
+	err = -1;
+	if (mode_name != NULL ) {
+		state_name = kmalloc(mode_len + 1, GFP_KERNEL);
+		if (state_name == NULL) {
+			dev_err(dev, "Failed to allocate state name\n");
+			err = -ENOMEM;
+			goto err_no_mode_mem;
+		}
+		strncpy(state_name, mode_name, mode_len);
+
+		/* try to select requested mode */
+		state = pinctrl_lookup_state(data->pinctrl, state_name);
+		if (!IS_ERR(state)) {
+			err = pinctrl_select_state(data->pinctrl, state);
+			if (err != 0) {
+				dev_warn(dev, "Unable to select requested mode %s\n", state_name);
+				kfree(state_name);
+			} else {
+				kfree(data->selected_state_name);
+				data->selected_state_name = state_name;
+				dev_notice(dev, "Set initial pinmux mode to %s\n", state_name);
+			}
+		}
+	}
+
+	/* try to select default state if mode_name failed */
+	if ( err != 0) {
+		state = pinctrl_lookup_state(data->pinctrl,
+				data->selected_state_name);
+		if (!IS_ERR(state)) {
+			err = pinctrl_select_state(data->pinctrl, state);
+			if (err != 0) {
+				dev_err(dev, "Failed to select default state\n");
+				goto err_no_state;
+			}
+		} else {
+			data->selected_state_name = '\0';
+		}
+	}
+
+	/* Register sysfs hooks */
+	err = sysfs_create_group(&dev->kobj, &pinmux_helper_attr_group);
+	if (err) {
+		dev_err(dev, "Failed to create sysfs group\n");
+		goto err_no_sysfs;
+	}
+
+	return 0;
+
+err_no_sysfs:
+err_no_state:
+err_no_mode_mem:
+	devm_pinctrl_put(data->pinctrl);
+err_no_pinctrl:
+	devm_kfree(dev, data->selected_state_name);
+err_no_state_mem:
+	devm_kfree(dev, data);
+err_no_mem:
+	return err;
+}
+
+static int bone_pinmux_helper_remove(struct platform_device *pdev)
+{
+	struct pinmux_helper_data *data = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
+
+	sysfs_remove_group(&dev->kobj, &pinmux_helper_attr_group);
+	kfree(data->selected_state_name);
+	devm_pinctrl_put(data->pinctrl);
+	devm_kfree(dev, data);
+
+	return 0;
+}
+
+struct platform_driver bone_pinmux_helper_driver = {
+	.probe		= bone_pinmux_helper_probe,
+	.remove		= bone_pinmux_helper_remove,
+	.driver = {
+		.name		= "bone-pinmux-helper",
+		.owner		= THIS_MODULE,
+		.of_match_table	= bone_pinmux_helper_of_match,
+	},
+};
+
+module_platform_driver(bone_pinmux_helper_driver);
+
+MODULE_AUTHOR("Pantelis Antoniou");
+MODULE_DESCRIPTION("Beaglebone pinmux helper driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:bone-pinmux-helper");
diff --git a/drivers/net/ieee802154/Kconfig b/drivers/net/ieee802154/Kconfig
index 0f7c6dc2e..77b48e196 100644
--- a/drivers/net/ieee802154/Kconfig
+++ b/drivers/net/ieee802154/Kconfig
@@ -73,6 +73,15 @@ config IEEE802154_ATUSB
 	  This driver can also be built as a module. To do so say M here.
 	  The module will be called 'atusb'.
 
+config IEEE802154_WPANUSB
+	tristate "WPANUSB driver"
+	depends on IEEE802154_DRIVERS && MAC802154 && USB
+	help
+	  Adds support for WPANUSB 802.15.4 adapters.
+
+	  This driver should work with at least the following devices:
+	  * BeagleBoard.org BeagleConnect Freedom
+
 config IEEE802154_ADF7242
 	tristate "ADF7242 transceiver driver"
 	depends on IEEE802154_DRIVERS && MAC802154
@@ -127,3 +136,12 @@ config IEEE802154_HWSIM
 
 	  This driver can also be built as a module. To do so say M here.
 	  The module will be called 'mac802154_hwsim'.
+
+config IEEE802154_BCFSERIAL
+	tristate "BCFSERIAL driver"
+	depends on IEEE802154_DRIVERS && MAC802154
+	help
+	  Adds support for BCFSERIAL 802.15.4 adapters.
+
+	  This driver should work with at least the following devices:
+	  * BeagleBoard.org BeagleConnect Freedom
diff --git a/drivers/net/ieee802154/Makefile b/drivers/net/ieee802154/Makefile
index 0c78b6298..1b3ea397b 100644
--- a/drivers/net/ieee802154/Makefile
+++ b/drivers/net/ieee802154/Makefile
@@ -4,7 +4,9 @@ obj-$(CONFIG_IEEE802154_AT86RF230) += at86rf230.o
 obj-$(CONFIG_IEEE802154_MRF24J40) += mrf24j40.o
 obj-$(CONFIG_IEEE802154_CC2520) += cc2520.o
 obj-$(CONFIG_IEEE802154_ATUSB) += atusb.o
+obj-$(CONFIG_IEEE802154_WPANUSB) += wpanusb.o
 obj-$(CONFIG_IEEE802154_ADF7242) += adf7242.o
 obj-$(CONFIG_IEEE802154_CA8210) += ca8210.o
 obj-$(CONFIG_IEEE802154_MCR20A) += mcr20a.o
 obj-$(CONFIG_IEEE802154_HWSIM) += mac802154_hwsim.o
+obj-$(CONFIG_IEEE802154_BCFSERIAL) += bcfserial.o
diff --git a/drivers/net/ieee802154/bcfserial.c b/drivers/net/ieee802154/bcfserial.c
new file mode 100644
index 000000000..d8d85d801
--- /dev/null
+++ b/drivers/net/ieee802154/bcfserial.c
@@ -0,0 +1,680 @@
+
+/*
+ *  bcfserial.c - Serial interface driver for BeagleConnect Freedom.
+ */
+#include <linux/circ_buf.h>
+#include <linux/crc-ccitt.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/serdev.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+
+#include <net/cfg802154.h>
+#include <net/mac802154.h>
+
+#define DEBUG
+
+#define BCFSERIAL_DRV_VERSION "0.1.0"
+#define BCFSERIAL_DRV_NAME "bcfserial"
+
+#define HDLC_FRAME	0x7E
+#define HDLC_ESC	0x7D
+#define HDLC_XOR	0x20
+
+#define ADDRESS_CTRL	0x01
+#define ADDRESS_WPAN	0x03
+#define ADDRESS_CDC	0x05
+#define ADDRESS_HW	0x41
+
+#define MAX_PSDU		127
+#define MAX_RX_XFER		(1 + MAX_PSDU + 2 + 1)	/* PHR+PSDU+CRC+LQI */
+#define HDLC_HEADER_LEN 	2
+#define PACKET_HEADER_LEN	8
+#define CRC_LEN 		2
+#define RX_HDLC_PAYLOAD		140
+#define MAX_TX_HDLC		(1 + HDLC_HEADER_LEN + PACKET_HEADER_LEN + MAX_RX_XFER + CRC_LEN + 1)
+#define MAX_RX_HDLC		(1 + RX_HDLC_PAYLOAD + CRC_LEN)
+#define TX_CIRC_BUF_SIZE	1024
+
+enum bcfserial_requests {
+	RESET,
+	TX,
+	XMIT_ASYNC,
+	ED,
+	SET_CHANNEL,
+	START,
+	STOP,
+	SET_SHORT_ADDR,
+	SET_PAN_ID,
+	SET_IEEE_ADDR,
+	SET_TXPOWER,
+	SET_CCA_MODE,
+	SET_CCA_ED_LEVEL,
+	SET_CSMA_PARAMS,
+	SET_LBT,
+	SET_FRAME_RETRIES,
+	SET_PROMISCUOUS_MODE,
+	GET_EXTENDED_ADDR,
+	GET_SUPPORTED_CHANNELS,
+};
+
+struct bcfserial {
+	struct serdev_device *serdev;
+	struct ieee802154_hw *hw;
+
+	struct work_struct tx_work;
+	spinlock_t tx_producer_lock;
+	spinlock_t tx_consumer_lock;
+	struct circ_buf tx_circ_buf;
+	struct sk_buff *tx_skb;
+	u16 tx_crc;
+	u8 tx_ack_seq;		/* current TX ACK sequence number */
+
+	size_t response_size;
+	u8 *response_buffer;
+
+	u8 rx_in_esc;
+	u8 rx_address;
+	u16 rx_offset;
+	u8 *rx_buffer;
+};
+
+// RX Packet Format:
+// - WPAN RX PACKET:	[len] payload [lqi]
+// - WPAN TX ACK:	[seq]
+// - WPAN CAPABILITIES:	supported_channels_mask(4)
+// - CDC:		printable_chars
+
+static void bcfserial_serdev_write_locked(struct bcfserial *bcfserial)
+{
+	//must be locked already
+	int head = smp_load_acquire(&bcfserial->tx_circ_buf.head);
+	int tail = bcfserial->tx_circ_buf.tail;
+	int count = CIRC_CNT_TO_END(head, tail, TX_CIRC_BUF_SIZE);
+	int written;
+
+	if (count >= 1) {
+		written = serdev_device_write_buf(bcfserial->serdev, &bcfserial->tx_circ_buf.buf[tail], count);
+
+		smp_store_release(&(bcfserial->tx_circ_buf.tail), (tail + written) & (TX_CIRC_BUF_SIZE - 1));
+	}
+}
+
+static void bcfserial_append(struct bcfserial *bcfserial, u8 value)
+{
+	//must be locked already
+	int head = bcfserial->tx_circ_buf.head;
+
+	while(true)
+	{
+		int tail = READ_ONCE(bcfserial->tx_circ_buf.tail);
+
+		if (CIRC_SPACE(head, tail, TX_CIRC_BUF_SIZE) >= 1) {
+
+			bcfserial->tx_circ_buf.buf[head] = value;
+
+			smp_store_release(&(bcfserial->tx_circ_buf.head),
+					  (head + 1) & (TX_CIRC_BUF_SIZE - 1));
+			return;
+		} else {
+			dev_dbg(&bcfserial->serdev->dev, "Tx circ buf full\n");
+			usleep_range(3000,5000);
+		}
+	}
+}
+
+static void bcfserial_append_tx_frame(struct bcfserial *bcfserial)
+{
+	bcfserial->tx_crc = 0xFFFF;
+	bcfserial_append(bcfserial, HDLC_FRAME);
+}
+
+static void bcfserial_append_escaped(struct bcfserial *bcfserial, u8 value)
+{
+        if (value == HDLC_FRAME || value == HDLC_ESC) {
+                bcfserial_append(bcfserial, HDLC_ESC);
+                value ^= HDLC_XOR;
+        }
+        bcfserial_append(bcfserial, value);
+}
+
+static void bcfserial_append_tx_u8(struct bcfserial *bcfserial, u8 value)
+{
+	bcfserial->tx_crc = crc_ccitt(bcfserial->tx_crc, &value, 1);
+	bcfserial_append_escaped(bcfserial, value);
+}
+
+static void bcfserial_append_tx_buffer(struct bcfserial *bcfserial, const void *buffer, size_t len)
+{
+	size_t i;
+	for (i=0; i<len; i++) {
+		bcfserial_append_tx_u8(bcfserial, ((u8*)buffer)[i]);
+	}
+}
+
+static void bcfserial_append_tx_le16(struct bcfserial *bcfserial, u16 value)
+{
+	value = cpu_to_le16(value);
+	bcfserial_append_tx_buffer(bcfserial, (u8 *)&value, sizeof(u16));
+}
+
+static void bcfserial_append_tx_crc(struct bcfserial *bcfserial)
+{
+	bcfserial->tx_crc ^= 0xffff;
+	bcfserial_append_escaped(bcfserial, bcfserial->tx_crc & 0xff);
+	bcfserial_append_escaped(bcfserial, (bcfserial->tx_crc >> 8) & 0xff);
+}
+
+static void bcfserial_hdlc_send(struct bcfserial *bcfserial, u8 cmd, u16 value, u16 index, u16 length, const void* buffer)
+{
+	// HDLC_FRAME
+	// 0 address : 0x01
+	// 1 control : 0x03
+	// 2 [bmRequestType] : 0x00
+	// 3 cmd (TX, START, STOP, etc)
+	// 4/5 value
+	// 6/7 index
+	// 8/9 length
+	// contents
+	// x/y crc
+	// HDLC_FRAME
+
+	spin_lock(&bcfserial->tx_producer_lock);
+
+	bcfserial_append_tx_frame(bcfserial);
+	bcfserial_append_tx_u8(bcfserial, 0x01); //address
+	bcfserial_append_tx_u8(bcfserial, 0x03); //control
+	bcfserial_append_tx_u8(bcfserial, 0x00); //ignored
+	bcfserial_append_tx_u8(bcfserial, cmd);
+	bcfserial_append_tx_le16(bcfserial, value);
+	bcfserial_append_tx_le16(bcfserial, index);
+	bcfserial_append_tx_le16(bcfserial, length);
+	bcfserial_append_tx_buffer(bcfserial, buffer, length);
+	bcfserial_append_tx_crc(bcfserial);
+	bcfserial_append_tx_frame(bcfserial);
+
+	spin_unlock(&bcfserial->tx_producer_lock);
+
+	spin_lock(&bcfserial->tx_consumer_lock);
+	bcfserial_serdev_write_locked(bcfserial);
+	spin_unlock(&bcfserial->tx_consumer_lock);
+}
+
+static void bcfserial_hdlc_send_cmd(struct bcfserial *bcfserial, u8 cmd)
+{
+	bcfserial_hdlc_send(bcfserial, cmd, 0, 0, 0, NULL);
+}
+
+static void bcfserial_hdlc_send_ack(struct bcfserial *bcfserial, u8 address, u8 seq)
+{
+	// To make this a valid S-frame:
+	// u8 ctrl = (((seq + 1) & 0x07) << 5) | 0x01;
+	// TODO Fix control frame type bug here and in wpanusb_bc
+
+	spin_lock(&bcfserial->tx_producer_lock);
+
+	bcfserial_append_tx_frame(bcfserial);
+	bcfserial_append_tx_u8(bcfserial, address); //address
+	bcfserial_append_tx_u8(bcfserial, 0x00); //control
+	bcfserial_append_tx_crc(bcfserial);
+	bcfserial_append_tx_frame(bcfserial);
+
+	spin_unlock(&bcfserial->tx_producer_lock);
+
+	spin_lock(&bcfserial->tx_consumer_lock);
+	bcfserial_serdev_write_locked(bcfserial);
+	spin_unlock(&bcfserial->tx_consumer_lock);
+}
+
+static int bcfserial_hdlc_receive(struct bcfserial *bcfserial, u8 cmd, void *buffer, size_t count)
+{
+	int retries = 5;
+	bcfserial->response_size = count;
+	bcfserial->response_buffer = (u8*)buffer;
+	bcfserial_hdlc_send_cmd(bcfserial, cmd);
+	// TODO semaphore? give/take
+	do {
+		usleep_range(10000,10001);
+	} while (bcfserial->response_size && retries--);
+	bcfserial->response_buffer = NULL;
+	if (bcfserial->response_size) {
+		bcfserial->response_size = 0;
+		return -EAGAIN;
+	}
+	return 0;
+}
+
+static int bcfserial_start(struct ieee802154_hw *hw)
+{
+	struct bcfserial *bcfserial = hw->priv;
+	dev_dbg(&bcfserial->serdev->dev, "START\n");
+	bcfserial_hdlc_send_cmd(bcfserial, START);
+	return 0;
+}
+
+static void bcfserial_stop(struct ieee802154_hw *hw)
+{
+	struct bcfserial *bcfserial = hw->priv;
+	dev_dbg(&bcfserial->serdev->dev, "STOP\n");
+	bcfserial_hdlc_send_cmd(bcfserial, STOP);
+}
+
+static int bcfserial_xmit(struct ieee802154_hw *hw, struct sk_buff *skb)
+{
+	struct bcfserial *bcfserial = hw->priv;
+
+	if (bcfserial->tx_skb)
+	{
+		dev_err(&bcfserial->serdev->dev, "SKB not freed! %d\n", bcfserial->tx_ack_seq);
+	}
+
+	bcfserial->tx_skb = skb;
+	bcfserial->tx_ack_seq++;
+	if (!bcfserial->tx_ack_seq) {
+		bcfserial->tx_ack_seq++;
+	}
+
+	dev_dbg(&bcfserial->serdev->dev, "XMIT %02x %d\n", bcfserial->tx_ack_seq, skb->len);
+
+	bcfserial_hdlc_send(bcfserial, TX, 0, bcfserial->tx_ack_seq, skb->len, skb->data);
+
+	return 0;
+}
+
+static int bcfserial_ed(struct ieee802154_hw *hw, u8 *level)
+{
+	struct bcfserial *bcfserial = hw->priv;
+	dev_dbg(&bcfserial->serdev->dev, "ED\n");
+	WARN_ON(!level);
+	*level = 0xbe;
+	return 0;
+}
+
+static int bcfserial_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+	struct bcfserial *bcfserial = hw->priv;
+	u8 buffer[2] = {page, channel};
+	dev_dbg(&bcfserial->serdev->dev, "SET CHANNEL %u %u\n", page, channel);
+	bcfserial_hdlc_send(bcfserial, SET_CHANNEL, 0, 0, 2, &buffer);
+	return 0;
+}
+
+static int bcfserial_set_hw_addr_filt(struct ieee802154_hw *hw,
+				      struct ieee802154_hw_addr_filt *filt,
+				      unsigned long changed)
+{
+	struct bcfserial *bcfserial = hw->priv;
+
+	if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
+		u16 addr = le16_to_cpu(filt->short_addr);
+		dev_dbg(&bcfserial->serdev->dev, "Short Address changed %x\n", addr);
+		bcfserial_hdlc_send(bcfserial, SET_SHORT_ADDR, 0, 0, sizeof(addr), &addr);
+	}
+
+	if (changed & IEEE802154_AFILT_PANID_CHANGED) {
+		u16 pan = le16_to_cpu(filt->pan_id);
+		dev_dbg(&bcfserial->serdev->dev, "PAN ID changed %x\n", pan);
+		bcfserial_hdlc_send(bcfserial, SET_PAN_ID, 0, 0, sizeof(pan), &pan);
+	}
+
+	if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
+		u64 ieee_addr = le64_to_cpu(filt->ieee_addr);
+		dev_dbg(&bcfserial->serdev->dev, "IEEE Addr changed %llx\n", ieee_addr);
+		bcfserial_hdlc_send(bcfserial, SET_IEEE_ADDR, 0, 0, sizeof(ieee_addr), &ieee_addr);
+	}
+	return 0;
+}
+
+static int bcfserial_set_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct bcfserial *bcfserial = hw->priv;
+	dev_dbg(&bcfserial->serdev->dev, "SET TXPOWER\n");
+	return -ENOTSUPP;
+}
+
+static int bcfserial_set_lbt(struct ieee802154_hw *hw, bool on)
+{
+	struct bcfserial *bcfserial = hw->priv;
+	dev_dbg(&bcfserial->serdev->dev, "SET LBT\n");
+	return -ENOTSUPP;
+}
+
+static int bcfserial_set_cca_mode(struct ieee802154_hw *hw,
+			   const struct wpan_phy_cca *cca)
+{
+	struct bcfserial *bcfserial = hw->priv;
+	dev_dbg(&bcfserial->serdev->dev, "SET CCA MODE\n");
+	return -ENOTSUPP;
+}
+
+static int bcfserial_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct bcfserial *bcfserial = hw->priv;
+	dev_dbg(&bcfserial->serdev->dev, "SET CCA ED LEVEL\n");
+	return -ENOTSUPP;
+}
+
+static int bcfserial_set_csma_params(struct ieee802154_hw *hw, u8 min_be, u8 max_be,
+			      u8 retries)
+{
+	struct bcfserial *bcfserial = hw->priv;
+	dev_dbg(&bcfserial->serdev->dev, "SET CSMA PARAMS\n");
+	return -ENOTSUPP;
+}
+
+static int bcfserial_set_frame_retries(struct ieee802154_hw *hw, s8 retries)
+{
+	struct bcfserial *bcfserial = hw->priv;
+	dev_dbg(&bcfserial->serdev->dev, "SET FRAME RETRIES\n");
+	return -ENOTSUPP;
+}
+
+static int bcfserial_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on)
+{
+	struct bcfserial *bcfserial = hw->priv;
+	dev_dbg(&bcfserial->serdev->dev, "SET PROMISCUOUS\n");
+	return -ENOTSUPP;
+}
+
+static const struct ieee802154_ops bcfserial_ops = {
+	.owner			= THIS_MODULE,
+	.start			= bcfserial_start,
+	.stop			= bcfserial_stop,
+	.xmit_async		= bcfserial_xmit,
+	.ed			= bcfserial_ed,
+	.set_channel		= bcfserial_set_channel,
+	.set_hw_addr_filt	= bcfserial_set_hw_addr_filt,
+	.set_txpower		= bcfserial_set_txpower,
+	.set_lbt		= bcfserial_set_lbt,
+	.set_cca_mode		= bcfserial_set_cca_mode,
+	.set_cca_ed_level	= bcfserial_set_cca_ed_level,
+	.set_csma_params	= bcfserial_set_csma_params,
+	.set_frame_retries	= bcfserial_set_frame_retries,
+	.set_promiscuous_mode	= bcfserial_set_promiscuous_mode,
+};
+
+static void bcfserial_wpan_rx(struct bcfserial *bcfserial, const u8 *buffer, size_t count)
+{
+	struct sk_buff *skb;
+	u8 len, lqi;
+
+	if (count == 1) {
+		// TX ACK
+		dev_dbg(&bcfserial->serdev->dev, "TX ACK: 0x%02x:0x%02x\n", buffer[0], bcfserial->tx_ack_seq);
+
+		if (buffer[0] == bcfserial->tx_ack_seq && bcfserial->tx_skb) {
+			skb = bcfserial->tx_skb;
+			bcfserial->tx_skb = NULL;
+			ieee802154_xmit_complete(bcfserial->hw, skb, false);
+		} else {
+			dev_err(&bcfserial->serdev->dev, "unknown ack %u\n", bcfserial->tx_ack_seq);
+		}
+	} else if (bcfserial->response_size == count && bcfserial->response_buffer) {
+		//TODO replace with semaphore
+		dev_dbg(&bcfserial->serdev->dev, "Response size %u found\n", count);
+		memcpy(bcfserial->response_buffer, buffer, count);
+		bcfserial->response_size = 0;
+	} else {
+		// RX Packet
+		dev_dbg(&bcfserial->serdev->dev, "RX Packet Len:%u LQI:%u\n", buffer[0], buffer[count-1]);
+		len = buffer[0];
+		lqi = buffer[count-1];
+
+		if (len+2 != count) {
+			dev_err(&bcfserial->serdev->dev, "RX Packet invalid length\n");
+			return;
+		}
+
+		if (!ieee802154_is_valid_psdu_len(len)) {
+			dev_err(&bcfserial->serdev->dev, "frame corrupted\n");
+			return;
+		}
+
+		skb = dev_alloc_skb(IEEE802154_MTU);
+		if (!skb) {
+			dev_err(&bcfserial->serdev->dev, "failed to allocate sk_buff\n");
+			return;
+		}
+
+		skb_put_data(skb, buffer+1, len);
+		ieee802154_rx_irqsafe(bcfserial->hw, skb, lqi);
+	}
+}
+
+static int bcfserial_tty_receive(struct serdev_device *serdev,
+	const unsigned char *data, size_t count)
+{
+	struct bcfserial *bcfserial = serdev_device_get_drvdata(serdev);
+	u16 crc_check = 0;
+	size_t i;
+	u8 c;
+
+
+	for (i = 0; i < count; i++) {
+		c = data[i];
+
+		if (c == HDLC_FRAME) {
+			if (bcfserial->rx_address != 0xFF) {
+				crc_check = crc_ccitt(0xffff, &bcfserial->rx_address, 1);
+				crc_check = crc_ccitt(crc_check, bcfserial->rx_buffer, bcfserial->rx_offset);
+
+				if (crc_check == 0xf0b8) {
+					if ((bcfserial->rx_buffer[0] & 1) == 0) {
+						//I-Frame, send S-Frame ACK
+						bcfserial_hdlc_send_ack(bcfserial, bcfserial->rx_address, (bcfserial->rx_buffer[0] >> 1) & 0x7);
+					}
+
+					if (bcfserial->rx_address == ADDRESS_WPAN) {
+						bcfserial_wpan_rx(bcfserial, bcfserial->rx_buffer + 1, bcfserial->rx_offset - 3);
+					}
+					else if (bcfserial->rx_address == ADDRESS_CDC) {
+						bcfserial->rx_buffer[bcfserial->rx_offset-2] = 0;
+						printk("> %s", bcfserial->rx_buffer+1);
+					}
+				}
+				else {
+					dev_err(&bcfserial->serdev->dev, "CRC Failed from %02x: 0x%04x\n", bcfserial->rx_address, crc_check);
+				}
+			}
+			bcfserial->rx_offset = 0;
+			bcfserial->rx_address = 0xFF;
+		} else if (c == HDLC_ESC) {
+			bcfserial->rx_in_esc = 1;
+		} else {
+			if (bcfserial->rx_in_esc) {
+				c ^= 0x20;
+				bcfserial->rx_in_esc = 0;
+			}
+
+			if (bcfserial->rx_address == 0xFF) {
+				bcfserial->rx_address = c;
+				if (bcfserial->rx_address == ADDRESS_WPAN ||
+				   bcfserial->rx_address == ADDRESS_CDC ||
+				   bcfserial->rx_address == ADDRESS_HW) {
+				} else {
+					bcfserial->rx_address = 0xFF;
+				}
+					bcfserial->rx_offset = 0;
+			} else {
+				if (bcfserial->rx_offset < MAX_RX_HDLC) {
+					bcfserial->rx_buffer[bcfserial->rx_offset] = c;
+					bcfserial->rx_offset++;
+				} else {
+					//buffer overflow
+					dev_err(&bcfserial->serdev->dev, "RX Buffer Overflow\n");
+					bcfserial->rx_address = 0xFF;
+					bcfserial->rx_offset = 0;
+				}
+			}
+		}
+	}
+
+	return count;
+}
+
+static void bcfserial_uart_transmit(struct work_struct *work)
+{
+	struct bcfserial *bcfserial = container_of(work, struct bcfserial, tx_work);
+
+	spin_lock_bh(&bcfserial->tx_consumer_lock);
+	bcfserial_serdev_write_locked(bcfserial);
+	spin_unlock_bh(&bcfserial->tx_consumer_lock);
+}
+
+static void bcfserial_tty_wakeup(struct serdev_device *serdev)
+{
+	struct bcfserial *bcfserial = serdev_device_get_drvdata(serdev);
+
+	schedule_work(&bcfserial->tx_work);
+}
+
+static struct serdev_device_ops bcfserial_serdev_ops = {
+	.receive_buf = bcfserial_tty_receive,
+	.write_wakeup = bcfserial_tty_wakeup,
+};
+
+static const struct of_device_id bcfserial_of_match[] = {
+	{
+	.compatible = "beagle,bcfserial",
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, bcfserial_of_match);
+
+static const s32 channel_powers[] = {
+	300, 280, 230, 180, 130, 70, 0, -100, -200, -300, -400, -500, -700,
+	-900, -1200, -1700,
+};
+
+static int bcfserial_get_device_capabilities(struct bcfserial *bcfserial)
+{
+	u32 valid_channels = 0;
+	int ret = 0;
+	struct ieee802154_hw *hw = bcfserial->hw;
+
+	bcfserial_hdlc_send_cmd(bcfserial, RESET);
+
+	ret = bcfserial_hdlc_receive(bcfserial, GET_SUPPORTED_CHANNELS, &valid_channels, sizeof(valid_channels));
+	if (ret < 0) {
+		return ret;
+	}
+	dev_dbg(&bcfserial->serdev->dev, "Supported Channels %x\n", valid_channels);
+
+	/* FIXME: these need to come from device capabilities */
+	hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT;
+
+	/* FIXME: these need to come from device capabilities */
+	hw->phy->flags = WPAN_PHY_FLAG_TXPOWER;
+
+	/* Set default and supported channels */
+	hw->phy->current_page = 0;
+	hw->phy->current_channel = ffs(valid_channels) - 1; //set to lowest valid channel
+	hw->phy->supported.channels[0] = valid_channels;
+
+	/* FIXME: these need to come from device capabilities */
+	hw->phy->supported.tx_powers = channel_powers;
+	hw->phy->supported.tx_powers_size = ARRAY_SIZE(channel_powers);
+	hw->phy->transmit_power = hw->phy->supported.tx_powers[0];
+
+	return ret;
+}
+
+static int bcfserial_probe(struct serdev_device *serdev)
+{
+	struct ieee802154_hw *hw;
+	struct bcfserial *bcfserial = NULL;
+	u32 speed = 115200;
+	int ret;
+
+	hw = ieee802154_alloc_hw(sizeof(struct bcfserial), &bcfserial_ops);
+	if (!hw)
+		return -ENOMEM;
+
+	bcfserial = hw->priv;
+	bcfserial->hw = hw;
+	hw->parent = &serdev->dev;
+	bcfserial->serdev = serdev;
+
+	INIT_WORK(&bcfserial->tx_work, bcfserial_uart_transmit);
+
+	spin_lock_init(&bcfserial->tx_producer_lock);
+	spin_lock_init(&bcfserial->tx_consumer_lock);
+	bcfserial->tx_circ_buf.head = 0;
+	bcfserial->tx_circ_buf.tail = 0;
+	bcfserial->tx_circ_buf.buf = devm_kmalloc(&serdev->dev, TX_CIRC_BUF_SIZE, GFP_KERNEL);
+
+	bcfserial->rx_buffer = devm_kmalloc(&serdev->dev, MAX_RX_HDLC, GFP_KERNEL);
+	bcfserial->rx_offset = 0;
+	bcfserial->rx_address = 0xff;
+	bcfserial->rx_in_esc = 0;
+
+	serdev_device_set_drvdata(serdev, bcfserial);
+	serdev_device_set_client_ops(serdev, &bcfserial_serdev_ops);
+
+	ret = serdev_device_open(serdev);
+	if (ret) {
+		dev_err(&bcfserial->serdev->dev, "Unable to open device\n");
+		goto fail_hw;
+	}
+
+	speed = serdev_device_set_baudrate(serdev, speed);
+	dev_dbg(&bcfserial->serdev->dev, "Using baudrate %u\n", speed);
+
+	serdev_device_set_flow_control(serdev, false);
+
+	bcfserial_hdlc_send_ack(bcfserial, 0x41, 0x00);
+
+	ret = bcfserial_get_device_capabilities(bcfserial);
+
+	if (ret < 0) {
+		// dev_err(&udev->dev, "Failed to get device capabilities");
+		dev_err(&bcfserial->serdev->dev, "Failed to get device capabilities\n");
+		goto fail;
+	}
+
+	ret = ieee802154_register_hw(hw);
+
+	dev_info(&bcfserial->serdev->dev, "bcfserial started");
+	if (ret)
+		goto fail;
+
+	return 0;
+
+fail:
+	dev_err(&bcfserial->serdev->dev, "Closing serial device on failure\n");
+	serdev_device_close(serdev);
+fail_hw:
+	printk(KERN_ERR "Failed to open bcfserial\n");
+	ieee802154_free_hw(hw);
+	return ret;
+}
+
+static void bcfserial_remove(struct serdev_device *serdev)
+{
+	struct bcfserial *bcfserial = serdev_device_get_drvdata(serdev);
+	dev_info(&bcfserial->serdev->dev, "Closing serial device\n");
+	ieee802154_unregister_hw(bcfserial->hw);
+	flush_work(&bcfserial->tx_work);
+	ieee802154_free_hw(bcfserial->hw);
+	serdev_device_close(serdev);
+}
+
+static struct serdev_device_driver bcfserial_driver = {
+	.probe = bcfserial_probe,
+	.remove = bcfserial_remove,
+	.driver = {
+		.name = BCFSERIAL_DRV_NAME,
+		.of_match_table = of_match_ptr(bcfserial_of_match),
+	},
+};
+
+module_serdev_device_driver(bcfserial_driver);
+
+MODULE_DESCRIPTION("WPAN serial driver for BeagleConnect Freedom");
+MODULE_AUTHOR("Erik Larson <erik@statropy.com>");
+MODULE_VERSION("0.1.0");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/ieee802154/wpanusb.c b/drivers/net/ieee802154/wpanusb.c
new file mode 100644
index 000000000..ab933c08b
--- /dev/null
+++ b/drivers/net/ieee802154/wpanusb.c
@@ -0,0 +1,783 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the WPANUSB IEEE 802.15.4 dongle
+ *
+ * Copyright (C) 2018 Intel Corp.
+ *
+ * The driver implements SoftMAC 802.15.4 protocol based on atusb
+ * driver for ATUSB IEEE 802.15.4 dongle.
+ *
+ * Written by Andrei Emeltchenko <andrei.emeltchenko@intel.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/skbuff.h>
+#include <linux/usb.h>
+
+#include <net/cfg802154.h>
+#include <net/mac802154.h>
+
+#define DEBUG
+#include "wpanusb.h"
+
+#define WPANUSB_NUM_RX_URBS	4	/* allow for a bit of local latency */
+#define WPANUSB_ALLOC_DELAY_MS	100	/* delay after failed allocation */
+
+#define VENDOR_OUT		(USB_TYPE_VENDOR | USB_DIR_OUT)
+#define VENDOR_IN		(USB_TYPE_VENDOR | USB_DIR_IN)
+
+#define WPANUSB_VALID_CHANNELS	(0x07FFFFFF)
+
+struct wpanusb {
+	struct ieee802154_hw *hw;
+	struct usb_device *udev;
+	int shutdown;			/* non-zero if shutting down */
+
+	/* RX variables */
+	struct delayed_work work;	/* memory allocations */
+	struct usb_anchor idle_urbs;	/* URBs waiting to be submitted */
+	struct usb_anchor rx_urbs;	/* URBs waiting for reception */
+
+	/* TX variables */
+	struct usb_ctrlrequest tx_dr;
+	struct urb *tx_urb;
+	struct sk_buff *tx_skb;
+	u8 tx_ack_seq;			/* current TX ACK sequence number */
+};
+
+/* ----- USB commands without data ----------------------------------------- */
+
+static int wpanusb_control_send(struct wpanusb *wpanusb, unsigned int pipe,
+				u8 request, void *data, u16 size)
+{
+	struct usb_device *udev = wpanusb->udev;
+
+	return usb_control_msg(udev, pipe, request, VENDOR_OUT,
+			       0, 0, data, size, 1000);
+}
+
+static int wpanusb_control_recv(struct wpanusb *wpanusb, u8 request, void *data, u16 size)
+{
+	struct usb_device *udev = wpanusb->udev;
+
+	usb_control_msg(udev, usb_sndctrlpipe(udev, 0), request, VENDOR_OUT,
+			       0, 0, NULL, 0, 1000);
+
+	return usb_control_msg(udev, usb_rcvbulkpipe(udev, 1), request, VENDOR_IN,
+			       0, 0, data, size, 1000);
+}
+
+/* ----- skb allocation ---------------------------------------------------- */
+
+#define MAX_PSDU	127
+#define MAX_RX_XFER	(1 + MAX_PSDU + 2 + 1)	/* PHR+PSDU+CRC+LQI */
+
+#define SKB_WPANUSB(skb)	(*(struct wpanusb **)(skb)->cb)
+
+static void wpanusb_bulk_complete(struct urb *urb);
+
+static int wpanusb_submit_rx_urb(struct wpanusb *wpanusb, struct urb *urb)
+{
+	struct usb_device *udev = wpanusb->udev;
+	struct sk_buff *skb = urb->context;
+	int ret;
+
+	if (!skb) {
+		skb = alloc_skb(MAX_RX_XFER, GFP_KERNEL);
+		if (!skb) {
+			dev_warn_ratelimited(&udev->dev,
+					     "can't allocate skb\n");
+			return -ENOMEM;
+		}
+		skb_put(skb, MAX_RX_XFER);
+		SKB_WPANUSB(skb) = wpanusb;
+	}
+
+	usb_fill_bulk_urb(urb, udev, usb_rcvbulkpipe(udev, 1),
+			  skb->data, MAX_RX_XFER, wpanusb_bulk_complete, skb);
+	usb_anchor_urb(urb, &wpanusb->rx_urbs);
+
+	ret = usb_submit_urb(urb, GFP_KERNEL);
+	if (ret) {
+		usb_unanchor_urb(urb);
+		kfree_skb(skb);
+		urb->context = NULL;
+	}
+
+	return ret;
+}
+
+static void wpanusb_work_urbs(struct work_struct *work)
+{
+	struct wpanusb *wpanusb =
+		container_of(to_delayed_work(work), struct wpanusb, work);
+	struct usb_device *udev = wpanusb->udev;
+	struct urb *urb;
+	int ret;
+
+	if (wpanusb->shutdown)
+		return;
+
+	do {
+		urb = usb_get_from_anchor(&wpanusb->idle_urbs);
+		if (!urb)
+			return;
+
+		ret = wpanusb_submit_rx_urb(wpanusb, urb);
+	} while (!ret);
+
+	usb_anchor_urb(urb, &wpanusb->idle_urbs);
+	dev_warn_ratelimited(&udev->dev, "can't allocate/submit URB (%d)\n",
+			     ret);
+	schedule_delayed_work(&wpanusb->work,
+			      msecs_to_jiffies(WPANUSB_ALLOC_DELAY_MS) + 1);
+}
+
+/* ----- Asynchronous USB -------------------------------------------------- */
+
+static void wpanusb_tx_done(struct wpanusb *wpanusb, uint8_t seq)
+{
+	struct usb_device *udev = wpanusb->udev;
+	u8 expect = wpanusb->tx_ack_seq;
+
+	dev_dbg(&udev->dev, "seq 0x%02x expect 0x%02x\n", seq, expect);
+
+	if (seq == expect) {
+		ieee802154_xmit_complete(wpanusb->hw, wpanusb->tx_skb, false);
+	} else {
+		dev_dbg(&udev->dev, "unknown ack %u\n", seq);
+
+		ieee802154_wake_queue(wpanusb->hw);
+		if (wpanusb->tx_skb)
+			dev_kfree_skb_irq(wpanusb->tx_skb);
+	}
+}
+
+static void wpanusb_process_urb(struct urb *urb)
+{
+	struct usb_device *udev = urb->dev;
+	struct sk_buff *skb = urb->context;
+	struct wpanusb *wpanusb = SKB_WPANUSB(skb);
+	u8 len, lqi;
+
+	if (!urb->actual_length) {
+		dev_dbg(&udev->dev, "zero-sized URB ?\n");
+		return;
+	}
+
+	len = *skb->data;
+
+	dev_dbg(&udev->dev, "urb %p urb len %u pkt len %u", urb,
+		urb->actual_length, len);
+
+	/* Handle ACK */
+	if (urb->actual_length == 1) {
+		wpanusb_tx_done(wpanusb, len);
+		return;
+	}
+
+	if (len + 1 > urb->actual_length - 1) {
+		dev_dbg(&udev->dev, "frame len %d+1 > URB %u-1\n",
+			len, urb->actual_length);
+		return;
+	}
+
+	if (!ieee802154_is_valid_psdu_len(len)) {
+		dev_dbg(&udev->dev, "frame corrupted\n");
+		return;
+	}
+
+	print_hex_dump_bytes("> ", DUMP_PREFIX_OFFSET, skb->data,
+			     urb->actual_length);
+
+	/* Get LQI at the end of the packet */
+	lqi = skb->data[len + 1];
+	dev_dbg(&udev->dev, "rx len %d lqi 0x%02x\n", len, lqi);
+	skb_pull(skb, 1);	/* remove length */
+	skb_trim(skb, len);	/* remove LQI */
+	ieee802154_rx_irqsafe(wpanusb->hw, skb, lqi);
+	urb->context = NULL;	/* skb is gone */
+}
+
+static void wpanusb_bulk_complete(struct urb *urb)
+{
+	struct usb_device *udev = urb->dev;
+	struct sk_buff *skb = urb->context;
+	struct wpanusb *wpanusb = SKB_WPANUSB(skb);
+
+	dev_dbg(&udev->dev, "status %d len %d\n",
+		urb->status, urb->actual_length);
+
+	if (urb->status) {
+		if (urb->status == -ENOENT) { /* being killed */
+			kfree_skb(skb);
+			urb->context = NULL;
+			return;
+		}
+
+		dev_dbg(&udev->dev, "URB error %d\n", urb->status);
+	} else {
+		wpanusb_process_urb(urb);
+	}
+
+	usb_anchor_urb(urb, &wpanusb->idle_urbs);
+	if (!wpanusb->shutdown)
+		schedule_delayed_work(&wpanusb->work, 0);
+}
+
+/* ----- URB allocation/deallocation --------------------------------------- */
+
+static void wpanusb_free_urbs(struct wpanusb *wpanusb)
+{
+	struct urb *urb;
+
+	do {
+		urb = usb_get_from_anchor(&wpanusb->idle_urbs);
+		if (!urb)
+			break;
+		kfree_skb(urb->context);
+		usb_free_urb(urb);
+	} while (true);
+}
+
+static int wpanusb_alloc_urbs(struct wpanusb *wpanusb, unsigned int n)
+{
+	struct urb *urb;
+
+	while (n--) {
+		urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!urb) {
+			wpanusb_free_urbs(wpanusb);
+			return -ENOMEM;
+		}
+		usb_anchor_urb(urb, &wpanusb->idle_urbs);
+	}
+
+	return 0;
+}
+
+/* ----- IEEE 802.15.4 interface operations -------------------------------- */
+
+static void wpanusb_xmit_complete(struct urb *urb)
+{
+	dev_dbg(&urb->dev->dev, "urb transmit completed");
+}
+
+static int wpanusb_xmit(struct ieee802154_hw *hw, struct sk_buff *skb)
+{
+	struct wpanusb *wpanusb = hw->priv;
+	struct usb_device *udev = wpanusb->udev;
+	int ret = 0;
+
+	dev_dbg(&udev->dev, "len %u", skb->len);
+
+	/* ack_seq range is 0x01 - 0xff */
+	wpanusb->tx_ack_seq++;
+	if (!wpanusb->tx_ack_seq)
+		wpanusb->tx_ack_seq++;
+
+	wpanusb->tx_skb = skb;
+	wpanusb->tx_dr.wIndex = cpu_to_le16(wpanusb->tx_ack_seq);
+	wpanusb->tx_dr.wLength = cpu_to_le16(skb->len);
+
+	usb_fill_control_urb(wpanusb->tx_urb, udev,
+			     usb_sndctrlpipe(udev, 0),
+			     (unsigned char *)&wpanusb->tx_dr, skb->data,
+			     skb->len, wpanusb_xmit_complete, NULL);
+	ret = usb_submit_urb(wpanusb->tx_urb, GFP_ATOMIC);
+
+	dev_dbg(&udev->dev, "%s: ret %d len %u seq %u\n", __func__, ret,
+		skb->len, wpanusb->tx_ack_seq);
+
+	return ret;
+}
+
+static int wpanusb_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+	struct wpanusb *wpanusb = hw->priv;
+	struct usb_device *udev = wpanusb->udev;
+	struct set_channel *req;
+	int ret;
+
+	req = kmalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	req->page = page;
+	req->channel = channel;
+
+	ret = wpanusb_control_send(wpanusb, usb_sndctrlpipe(udev, 0),
+				   SET_CHANNEL, req, sizeof(*req));
+	kfree(req);
+	if (ret < 0) {
+		dev_err(&udev->dev, "Failed set channel, ret %d", ret);
+		return ret;
+	}
+
+	dev_dbg(&udev->dev, "set page %u channel %u", page, channel);
+
+	return 0;
+}
+
+static int wpanusb_ed(struct ieee802154_hw *hw, u8 *level)
+{
+	WARN_ON(!level);
+
+	*level = 0xbe;
+
+	return 0;
+}
+
+static int wpanusb_set_hw_addr_filt(struct ieee802154_hw *hw,
+				    struct ieee802154_hw_addr_filt *filt,
+				    unsigned long changed)
+{
+	struct wpanusb *wpanusb = hw->priv;
+	struct usb_device *udev = wpanusb->udev;
+	int ret = 0;
+
+	if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
+		struct set_short_addr *req;
+
+		req = kmalloc(sizeof(*req), GFP_KERNEL);
+		if (!req)
+			return -ENOMEM;
+
+		req->short_addr = filt->short_addr;
+
+		ret = wpanusb_control_send(wpanusb, usb_sndctrlpipe(udev, 0),
+					   SET_SHORT_ADDR, req, sizeof(*req));
+		kfree(req);
+		if (ret < 0) {
+			dev_err(&udev->dev, "Failed to set short_addr, ret %d",
+				ret);
+			return ret;
+		}
+
+		dev_dbg(&udev->dev, "short addr changed to 0x%04x",
+			le16_to_cpu(filt->short_addr));
+	}
+
+	if (changed & IEEE802154_AFILT_PANID_CHANGED) {
+		struct set_pan_id *req;
+
+		req = kmalloc(sizeof(*req), GFP_KERNEL);
+		if (!req)
+			return -ENOMEM;
+
+		req->pan_id = filt->pan_id;
+
+		ret = wpanusb_control_send(wpanusb, usb_sndctrlpipe(udev, 0),
+					   SET_PAN_ID, req, sizeof(*req));
+		kfree(req);
+		if (ret < 0) {
+			dev_err(&udev->dev, "Failed to set pan_id, ret %d",
+				ret);
+			return ret;
+		}
+
+		dev_dbg(&udev->dev, "pan id changed to 0x%04x",
+			le16_to_cpu(filt->pan_id));
+	}
+
+	if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
+		struct set_ieee_addr *req;
+
+		req = kmalloc(sizeof(*req), GFP_KERNEL);
+		if (!req)
+			return -ENOMEM;
+
+		memcpy(&req->ieee_addr, &filt->ieee_addr,
+		       sizeof(req->ieee_addr));
+
+		ret = wpanusb_control_send(wpanusb, usb_sndctrlpipe(udev, 0),
+					   SET_IEEE_ADDR, req, sizeof(*req));
+		kfree(req);
+		if (ret < 0) {
+			dev_err(&udev->dev, "Failed to set ieee_addr, ret %d",
+				ret);
+			return ret;
+		}
+
+		dev_dbg(&udev->dev, "IEEE addr changed");
+	}
+
+	if (changed & IEEE802154_AFILT_PANC_CHANGED) {
+		dev_dbg(&udev->dev, "panc changed");
+
+		dev_err(&udev->dev, "Not handled AFILT_PANC_CHANGED");
+	}
+
+	return ret;
+}
+
+static int wpanusb_set_extended_addr(struct ieee802154_hw *hw)
+{
+	struct wpanusb *wpanusb = hw->priv;
+	struct usb_device *udev = wpanusb->udev;
+	unsigned char *buffer;
+	__le64 extended_addr;
+	int ret = 0;
+	u64 addr;
+
+	buffer = kmalloc(IEEE802154_EXTENDED_ADDR_LEN, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	ret = wpanusb_control_send(wpanusb, usb_sndctrlpipe(udev, 0), GET_EXTENDED_ADDR, buffer,
+					IEEE802154_EXTENDED_ADDR_LEN);
+	if (ret < 0) {
+		dev_err(&udev->dev, "failed to fetch extended address, random address set\n");
+		ieee802154_random_extended_addr(&wpanusb->hw->phy->perm_extended_addr);
+		kfree(buffer);
+		return ret;
+	}
+
+	memcpy(&extended_addr, buffer, IEEE802154_EXTENDED_ADDR_LEN);
+	/* Check if read address is not empty and the unicast bit is set correctly */
+	if (!ieee802154_is_valid_extended_unicast_addr(extended_addr)) {
+		dev_info(&udev->dev, "no permanent extended address found, random address set\n");
+		ieee802154_random_extended_addr(&wpanusb->hw->phy->perm_extended_addr);
+	} else {
+		wpanusb->hw->phy->perm_extended_addr = extended_addr;
+		addr = swab64((__force u64)wpanusb->hw->phy->perm_extended_addr);
+		dev_info(&udev->dev, "Read permanent extended address %8phC from device\n", &addr);
+	}
+
+	kfree(buffer);
+	return ret;
+}
+
+/* FIXME: these need to come as capabilities from the device */
+static const s32 wpanusb_powers[] = {
+	300, 280, 230, 180, 130, 70, 0, -100, -200, -300, -400, -500, -700,
+	-900, -1200, -1700,
+};
+
+static int wpanusb_get_device_capabilities(struct ieee802154_hw *hw)
+{
+	struct wpanusb *wpanusb = hw->priv;
+	struct usb_device *udev = wpanusb->udev;
+	unsigned char *buffer;
+	uint32_t valid_channels;
+	int ret = 0;
+
+	buffer = kmalloc(IEEE802154_EXTENDED_ADDR_LEN, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	ret = wpanusb_control_send(wpanusb, usb_sndctrlpipe(udev, 0), GET_EXTENDED_ADDR, buffer,
+					IEEE802154_EXTENDED_ADDR_LEN);
+	if (ret < 0) {
+		dev_err(&udev->dev, "failed to fetch extended address, random address set\n");
+		ieee802154_random_extended_addr(&wpanusb->hw->phy->perm_extended_addr);
+		kfree(buffer);
+		return ret;
+	}
+
+	buffer = kmalloc(sizeof(valid_channels), GFP_NOIO);
+	if (!buffer)
+		return -ENOMEM;
+	ret = wpanusb_control_recv(wpanusb, GET_SUPPORTED_CHANNELS, buffer,	sizeof(valid_channels));
+	if (ret != sizeof(uint32_t)) {
+		dev_err(&udev->dev, "failed to fetch supported channels\n");
+		kfree(buffer);
+		return ret;
+	}
+	valid_channels = *(uint32_t *)buffer;
+	if (!valid_channels) {
+		dev_err(&udev->dev, "failed to fetch valid channels, setting default valid channels\n");
+		valid_channels = WPANUSB_VALID_CHANNELS;
+	}
+
+	/* FIXME: these need to come from device capabilities */
+	hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT;
+
+	/* FIXME: these need to come from device capabilities */
+	hw->phy->flags = WPAN_PHY_FLAG_TXPOWER;
+
+	/* Set default and supported channels */
+	hw->phy->current_page = 0;
+	hw->phy->current_channel = ffs(valid_channels) - 1; //set to lowest valid channel
+	hw->phy->supported.channels[0] = valid_channels;
+
+	/* FIXME: these need to come from device capabilities */
+	hw->phy->supported.tx_powers = wpanusb_powers;
+	hw->phy->supported.tx_powers_size = ARRAY_SIZE(wpanusb_powers);
+	hw->phy->transmit_power = hw->phy->supported.tx_powers[0];
+
+	kfree(buffer);
+	return ret;
+}
+
+static int wpanusb_start(struct ieee802154_hw *hw)
+{
+	struct wpanusb *wpanusb = hw->priv;
+	struct usb_device *udev = wpanusb->udev;
+	int ret;
+
+	schedule_delayed_work(&wpanusb->work, 0);
+
+	ret = wpanusb_control_send(wpanusb, usb_sndctrlpipe(udev, 0),
+				   START, NULL, 0);
+	if (ret < 0) {
+		dev_err(&udev->dev, "Failed to start ieee802154");
+		usb_kill_anchored_urbs(&wpanusb->idle_urbs);
+	}
+
+	return ret;
+}
+
+static void wpanusb_stop(struct ieee802154_hw *hw)
+{
+	struct wpanusb *wpanusb = hw->priv;
+	struct usb_device *udev = wpanusb->udev;
+	int ret;
+
+	dev_dbg(&udev->dev, "stop");
+
+	usb_kill_anchored_urbs(&wpanusb->idle_urbs);
+
+	ret = wpanusb_control_send(wpanusb, usb_sndctrlpipe(udev, 0),
+				   STOP, NULL, 0);
+	if (ret < 0)
+		dev_err(&udev->dev, "Failed to stop ieee802154");
+}
+
+static int wpanusb_set_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct wpanusb *wpanusb = hw->priv;
+	struct usb_device *udev = wpanusb->udev;
+
+	dev_err(&udev->dev, "%s: Not handled, mbm %d", __func__, mbm);
+
+	return -ENOTSUPP;
+}
+
+static int wpanusb_set_cca_mode(struct ieee802154_hw *hw,
+				const struct wpan_phy_cca *cca)
+{
+	struct wpanusb *wpanusb = hw->priv;
+	struct usb_device *udev = wpanusb->udev;
+
+	dev_err(&udev->dev, "%s: Not handled, mode %u opt %u",
+		__func__, cca->mode, cca->opt);
+
+	switch (cca->mode) {
+	case NL802154_CCA_ENERGY:
+		break;
+	case NL802154_CCA_CARRIER:
+		break;
+	case NL802154_CCA_ENERGY_CARRIER:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int wpanusb_set_lbt(struct ieee802154_hw *hw, bool on)
+{
+	struct wpanusb *wpanusb = hw->priv;
+	struct usb_device *udev = wpanusb->udev;
+	int ret = 0;
+
+	if (on)
+		ret = wpanusb_control_send(wpanusb, usb_sndctrlpipe(udev, 0),
+				   SET_LBT, NULL, 0);
+
+	return ret;
+}
+
+static int wpanusb_set_frame_retries(struct ieee802154_hw *hw, s8 retries)
+{
+	struct wpanusb *wpanusb = hw->priv;
+	struct usb_device *udev = wpanusb->udev;
+	int ret;
+
+	/* FIXME pass retries onwards to device */
+	ret = wpanusb_control_send(wpanusb, usb_sndctrlpipe(udev, 0),
+				   SET_FRAME_RETRIES, NULL, 0);
+
+	return ret;
+}
+
+static int wpanusb_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct wpanusb *wpanusb = hw->priv;
+	struct usb_device *udev = wpanusb->udev;
+
+	dev_err(&udev->dev, "%s: Not handled, mbm %d", __func__, mbm);
+
+	return 0;
+}
+
+static int wpanusb_set_csma_params(struct ieee802154_hw *hw, u8 min_be,
+				   u8 max_be, u8 retries)
+{
+	struct wpanusb *wpanusb = hw->priv;
+	struct usb_device *udev = wpanusb->udev;
+
+	dev_err(&udev->dev, "%s: Not handled, min_be %u max_be %u retr %u",
+		__func__, min_be, max_be, retries);
+
+	return 0;
+}
+
+static int wpanusb_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on)
+{
+	struct wpanusb *wpanusb = hw->priv;
+	struct usb_device *udev = wpanusb->udev;
+
+	dev_err(&udev->dev, "%s: Not handled, on %d", __func__, on);
+
+	return 0;
+}
+
+static const struct ieee802154_ops wpanusb_ops = {
+	.owner			= THIS_MODULE,
+	.xmit_async		= wpanusb_xmit,
+	.ed			= wpanusb_ed,
+	.set_channel		= wpanusb_channel,
+	.start			= wpanusb_start,
+	.stop			= wpanusb_stop,
+	.set_hw_addr_filt	= wpanusb_set_hw_addr_filt,
+	.set_txpower		= wpanusb_set_txpower,
+	.set_lbt		= wpanusb_set_lbt,
+	.set_cca_mode		= wpanusb_set_cca_mode,
+	.set_cca_ed_level	= wpanusb_set_cca_ed_level,
+	.set_csma_params	= wpanusb_set_csma_params,
+	.set_frame_retries	= wpanusb_set_frame_retries,
+	.set_promiscuous_mode	= wpanusb_set_promiscuous_mode,
+};
+
+/* ----- Setup ------------------------------------------------------------- */
+
+static int wpanusb_probe(struct usb_interface *interface,
+			 const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(interface);
+	struct ieee802154_hw *hw;
+	struct wpanusb *wpanusb;
+	int ret;
+
+	hw = ieee802154_alloc_hw(sizeof(struct wpanusb), &wpanusb_ops);
+	if (!hw)
+		return -ENOMEM;
+
+	wpanusb = hw->priv;
+	wpanusb->hw = hw;
+	wpanusb->udev = usb_get_dev(udev);
+	usb_set_intfdata(interface, wpanusb);
+
+	wpanusb->shutdown = 0;
+	INIT_DELAYED_WORK(&wpanusb->work, wpanusb_work_urbs);
+	init_usb_anchor(&wpanusb->idle_urbs);
+	init_usb_anchor(&wpanusb->rx_urbs);
+
+	ret = wpanusb_alloc_urbs(wpanusb, WPANUSB_NUM_RX_URBS);
+	if (ret)
+		goto fail;
+
+	wpanusb->tx_dr.bRequestType = VENDOR_OUT;
+	wpanusb->tx_dr.bRequest = TX;
+	wpanusb->tx_dr.wValue = cpu_to_le16(0);
+
+	wpanusb->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!wpanusb->tx_urb)
+		goto fail;
+
+	hw->parent = &udev->dev;
+
+	ret = wpanusb_control_send(wpanusb, usb_sndctrlpipe(udev, 0), RESET,
+				   NULL, 0);
+	if (ret < 0) {
+		dev_err(&udev->dev, "Failed to RESET ieee802154");
+		goto fail;
+	}
+
+	ret = wpanusb_get_device_capabilities(hw);
+
+	if (ret < 0) {
+		dev_err(&udev->dev, "Failed to get device capabilities");
+		goto fail;
+	}
+
+	ret = wpanusb_set_extended_addr(hw);
+
+	if (ret < 0) {
+		dev_err(&udev->dev, "Failed to set permanent address");
+		goto fail;
+	}
+
+	ret = ieee802154_register_hw(hw);
+	if (ret) {
+		dev_err(&udev->dev, "Failed to register ieee802154");
+		goto fail;
+	}
+
+	dev_dbg(&udev->dev, "ieee802154 ready to go");
+
+	return 0;
+
+fail:
+	dev_err(&udev->dev, "Failed ieee802154 probe");
+	wpanusb_free_urbs(wpanusb);
+	usb_kill_urb(wpanusb->tx_urb);
+	usb_free_urb(wpanusb->tx_urb);
+	usb_put_dev(udev);
+	ieee802154_free_hw(hw);
+
+	return ret;
+}
+
+static void wpanusb_disconnect(struct usb_interface *interface)
+{
+	struct wpanusb *wpanusb = usb_get_intfdata(interface);
+
+	wpanusb->shutdown = 1;
+	cancel_delayed_work_sync(&wpanusb->work);
+
+	usb_kill_anchored_urbs(&wpanusb->rx_urbs);
+	wpanusb_free_urbs(wpanusb);
+	usb_kill_urb(wpanusb->tx_urb);
+	usb_free_urb(wpanusb->tx_urb);
+
+	ieee802154_unregister_hw(wpanusb->hw);
+
+	ieee802154_free_hw(wpanusb->hw);
+
+	usb_set_intfdata(interface, NULL);
+	usb_put_dev(wpanusb->udev);
+}
+
+/* The devices we work with */
+static const struct usb_device_id wpanusb_device_table[] = {
+	{
+		USB_DEVICE_AND_INTERFACE_INFO(WPANUSB_VENDOR_ID,
+					      WPANUSB_PRODUCT_ID,
+					      USB_CLASS_VENDOR_SPEC,
+					      0, 0),
+                USB_DEVICE_AND_INTERFACE_INFO(BEAGLECONNECT_VENDOR_ID,
+                                                BEAGLECONNECT_PRODUCT_ID,
+                                                USB_CLASS_VENDOR_SPEC,
+                                                0, 0)
+	},
+	/* end with null element */
+	{}
+};
+MODULE_DEVICE_TABLE(usb, wpanusb_device_table);
+
+static struct usb_driver wpanusb_driver = {
+	.name		= "wpanusb",
+	.probe		= wpanusb_probe,
+	.disconnect	= wpanusb_disconnect,
+	.id_table	= wpanusb_device_table,
+};
+module_usb_driver(wpanusb_driver);
+
+MODULE_AUTHOR("Andrei Emeltchenko <andrei.emeltchenko@intel.com>");
+MODULE_DESCRIPTION("WPANUSB IEEE 802.15.4 over USB Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ieee802154/wpanusb.h b/drivers/net/ieee802154/wpanusb.h
new file mode 100644
index 000000000..52e54fdca
--- /dev/null
+++ b/drivers/net/ieee802154/wpanusb.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Definitions shared between kernel and WPANUSB firmware
+ *
+ * Copyright (C) 2018 Intel Corp.
+ *
+ * Written by Andrei Emeltchenko <andrei.emeltchenko@intel.com>
+ */
+
+#define WPANUSB_VENDOR_ID	0x2fe3
+#define WPANUSB_PRODUCT_ID	0x0101
+
+#define BEAGLECONNECT_VENDOR_ID  0x2047
+#define BEAGLECONNECT_PRODUCT_ID 0x0aa5
+
+enum wpanusb_requests {
+	RESET,
+	TX,
+	XMIT_ASYNC,
+	ED,
+	SET_CHANNEL,
+	START,
+	STOP,
+	SET_SHORT_ADDR,
+	SET_PAN_ID,
+	SET_IEEE_ADDR,
+	SET_TXPOWER,
+	SET_CCA_MODE,
+	SET_CCA_ED_LEVEL,
+	SET_CSMA_PARAMS,
+	SET_LBT,
+	SET_FRAME_RETRIES,
+	SET_PROMISCUOUS_MODE,
+	GET_EXTENDED_ADDR,
+	GET_SUPPORTED_CHANNELS,
+};
+
+struct set_channel {
+	__u8 page;
+	__u8 channel;
+} __packed;
+
+struct set_short_addr {
+	__le16 short_addr;
+} __packed;
+
+struct set_pan_id {
+	__le16 pan_id;
+} __packed;
+
+struct set_ieee_addr {
+	__le64 ieee_addr;
+} __packed;
diff --git a/drivers/regulator/twl6030-regulator.c b/drivers/regulator/twl6030-regulator.c
index 430265c40..99f7eb8db 100644
--- a/drivers/regulator/twl6030-regulator.c
+++ b/drivers/regulator/twl6030-regulator.c
@@ -299,6 +299,13 @@ static const struct regulator_ops twl6030fixed_ops = {
 	.get_status	= twl6030reg_get_status,
 };
 
+static struct regulator_ops twl6030_fixed_resource = {
+	.enable	= twl6030reg_enable,
+	.disable	= twl6030reg_disable,
+	.is_enabled	= twl6030reg_is_enabled,
+	.get_status	= twl6030reg_get_status,
+};
+
 /*
  * SMPS status and control
  */
@@ -572,6 +579,19 @@ static const struct twlreg_info TWLSMPS_INFO_##label = { \
 		}, \
 	}
 
+#define TWL6030_FIXED_RESOURCE(label, offset, turnon_delay) \
+static struct twlreg_info TWLRES_INFO_##label = { \
+	.base = offset, \
+	.desc = { \
+	.name = #label, \
+	.id = TWL6030_REG_##label, \
+	.ops = &twl6030_fixed_resource, \
+	.type = REGULATOR_VOLTAGE, \
+	.owner = THIS_MODULE, \
+	.enable_time = turnon_delay, \
+	}, \
+	}
+
 /* VUSBCP is managed *only* by the USB subchip */
 /* 6030 REG with base as PMC Slave Misc : 0x0030 */
 /* Turnon-delay and remap configuration values for 6030 are not
@@ -601,6 +621,7 @@ TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 0);
 TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 0);
 TWL6030_FIXED_LDO(V1V8, 0x16, 1800, 0);
 TWL6030_FIXED_LDO(V2V1, 0x1c, 2100, 0);
+TWL6030_FIXED_RESOURCE(CLK32KG, 0x8C, 0);
 TWL6032_ADJUSTABLE_SMPS(SMPS3, 0x34);
 TWL6032_ADJUSTABLE_SMPS(SMPS4, 0x10);
 TWL6032_ADJUSTABLE_SMPS(VIO, 0x16);
@@ -632,6 +653,7 @@ static u8 twl_get_smps_mult(void)
 #define TWL6030_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWL6030, label)
 #define TWL6032_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWL6032, label)
 #define TWLFIXED_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWLFIXED, label)
+#define TWLRES_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWLRES, label)
 #define TWLSMPS_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWLSMPS, label)
 
 static const struct of_device_id twl_of_match[] = {
@@ -659,6 +681,7 @@ static const struct of_device_id twl_of_match[] = {
 	TWLFIXED_OF_MATCH("ti,twl6030-vusb", VUSB),
 	TWLFIXED_OF_MATCH("ti,twl6030-v1v8", V1V8),
 	TWLFIXED_OF_MATCH("ti,twl6030-v2v1", V2V1),
+	TWLRES_OF_MATCH("ti,twl6030-clk32kg", CLK32KG),
 	TWLSMPS_OF_MATCH("ti,twl6032-smps3", SMPS3),
 	TWLSMPS_OF_MATCH("ti,twl6032-smps4", SMPS4),
 	TWLSMPS_OF_MATCH("ti,twl6032-vio", VIO),
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index a5cceca8b..259244ea2 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -751,10 +751,9 @@ static int spidev_probe(struct spi_device *spi)
 	 * compatible string, it is a Linux implementation thing
 	 * rather than a description of the hardware.
 	 */
-	if (spi->dev.of_node && of_device_is_compatible(spi->dev.of_node, "spidev")) {
-		dev_err(&spi->dev, "spidev listed directly in DT is not supported\n");
-		return -EINVAL;
-	}
+//	WARN(spi->dev.of_node &&
+//	     of_device_is_compatible(spi->dev.of_node, "spidev"),
+//	     "%pOF: buggy DT: spidev listed directly in DT\n", spi->dev.of_node);
 
 	spidev_probe_acpi(spi);
 
diff --git a/drivers/staging/fbtft/fb_ssd1306.c b/drivers/staging/fbtft/fb_ssd1306.c
index 6cf9df579..4cd616171 100644
--- a/drivers/staging/fbtft/fb_ssd1306.c
+++ b/drivers/staging/fbtft/fb_ssd1306.c
@@ -55,6 +55,9 @@ static int init_display(struct fbtft_par *par)
 		write_reg(par, 0x3F);
 	else if (par->info->var.yres == 48)
 		write_reg(par, 0x2F);
+	else if (par->info->var.yres == 39)
+		/* https://libstock.mikroe.com/projects/download/1111/2577/1411057038_oled_b_click___e_mikroc_arm.zip */
+		write_reg(par, 0x27);
 	else
 		write_reg(par, 0x1F);
 
@@ -76,19 +79,27 @@ static int init_display(struct fbtft_par *par)
 	write_reg(par, 0x01);
 
 	/* Set Segment Re-map */
-	/* column address 127 is mapped to SEG0 */
-	write_reg(par, 0xA0 | 0x1);
+	if (par->info->var.yres == 39)
+		/* no segment re-map */
+		write_reg(par, 0xA0 | 0x0);
+	else
+		/* column address 127 is mapped to SEG0 */
+		write_reg(par, 0xA0 | 0x1);
 
 	/* Set COM Output Scan Direction */
-	/* remapped mode. Scan from COM[N-1] to COM0 */
-	write_reg(par, 0xC8);
+	if (par->info->var.yres == 39)
+		/* no columnt re-map mode. Scan from COM0 to COM[N-1] */
+		write_reg(par, 0xC0);
+	else
+		/* remapped mode. Scan from COM[N-1] to COM0 */
+		write_reg(par, 0xC8);
 
 	/* Set COM Pins Hardware Configuration */
 	write_reg(par, 0xDA);
 	if (par->info->var.yres == 64)
 		/* A[4]=1b, Alternative COM pin configuration */
 		write_reg(par, 0x12);
-	else if (par->info->var.yres == 48)
+	else if (par->info->var.yres == 48 || par->info->var.yres == 39)
 		/* A[4]=1b, Alternative COM pin configuration */
 		write_reg(par, 0x12);
 	else
@@ -97,12 +108,18 @@ static int init_display(struct fbtft_par *par)
 
 	/* Set Pre-charge Period */
 	write_reg(par, 0xD9);
-	write_reg(par, 0xF1);
+	if (par->info->var.yres == 39)
+		write_reg(par, 0x25);
+	else
+		write_reg(par, 0xF1);
 
 	/* Set VCOMH Deselect Level */
 	write_reg(par, 0xDB);
-	/* according to the datasheet, this value is out of bounds */
-	write_reg(par, 0x40);
+	if (par->info->var.yres == 39)
+		write_reg(par, 0x20);
+	else
+		/* according to the datasheet, this value is out of bounds */
+		write_reg(par, 0x40);
 
 	/* Entire Display ON */
 	/* Resume to RAM content display. Output follows RAM content */
@@ -133,6 +150,20 @@ static void set_addr_win_64x48(struct fbtft_par *par)
 	write_reg(par, 0x5);
 }
 
+static void set_addr_win_96x39(struct fbtft_par *par)
+{
+	/* Set Page Address */
+	write_reg(par, 0xB0);
+	/* Set Column Address */
+	write_reg(par, 0x21);
+	write_reg(par, 0x00);
+	write_reg(par, 0x5F);
+	/* Set Page Address Range */
+	write_reg(par, 0x22);
+	write_reg(par, 0x0);
+	write_reg(par, 0x4);
+}
+
 static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 {
 	/* Set Lower Column Start Address for Page Addressing Mode */
@@ -144,6 +175,8 @@ static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 
 	if (par->info->var.xres == 64 && par->info->var.yres == 48)
 		set_addr_win_64x48(par);
+	else if (par->info->var.xres == 96 && par->info->var.yres == 39)
+		set_addr_win_96x39(par);
 }
 
 static int blank(struct fbtft_par *par, bool on)
@@ -188,11 +221,19 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
 					*buf |= BIT(i);
 			buf++;
 		}
+		if (yres % 8) {
+			*buf = 0x00;
+			for (i = 0; i < (yres - (y * 8)); i++)
+				if (vmem16[(y * 8 + i) * xres + x])
+					*buf |= BIT(i);
+			buf++;
+			y++;
+		}
 	}
 
 	/* Write data */
 	gpiod_set_value(par->gpio.dc, 1);
-	ret = par->fbtftops.write(par, par->txbuf.buf, xres * yres / 8);
+	ret = par->fbtftops.write(par, par->txbuf.buf, xres * (yres / 8 + (yres % 8 != 0)));
 	if (ret < 0)
 		dev_err(par->info->device, "write failed and returned: %d\n",
 			ret);
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index 92e343327..1321fdcb5 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -27,12 +27,17 @@ static ssize_t modalias_show(struct device *dev,
 			     struct device_attribute *attr, char *buf)
 {
 	int len;
+	struct serdev_device *serdev = to_serdev_device(dev);
 
 	len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1);
 	if (len != -ENODEV)
 		return len;
 
-	return of_device_modalias(dev, buf, PAGE_SIZE);
+	len = of_device_modalias(dev, buf, PAGE_SIZE);
+	if (len != -ENODEV)
+		return len;
+
+	return sprintf(buf, "%s%s\n", SERDEV_MODULE_PREFIX, serdev->modalias);
 }
 static DEVICE_ATTR_RO(modalias);
 
@@ -45,14 +50,18 @@ ATTRIBUTE_GROUPS(serdev_device);
 static int serdev_device_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
 	int rc;
-
-	/* TODO: platform modalias */
+	struct serdev_device *serdev = to_serdev_device(dev);
 
 	rc = acpi_device_uevent_modalias(dev, env);
 	if (rc != -ENODEV)
 		return rc;
 
-	return of_device_uevent_modalias(dev, env);
+	rc = of_device_uevent_modalias(dev, env);
+	if (rc != -ENODEV)
+		return rc;
+
+	return add_uevent_var(env, "MODALIAS=%s%s", SERDEV_MODULE_PREFIX,
+							serdev->modalias);
 }
 
 static void serdev_device_release(struct device *dev)
@@ -83,16 +92,36 @@ static const struct device_type serdev_ctrl_type = {
 	.release	= serdev_ctrl_release,
 };
 
+static int serdev_match_id(const struct serdev_device_id *id,
+			   const struct serdev_device *sdev)
+{
+	while (id->name[0]) {
+		if (!strcmp(sdev->modalias, id->name))
+			return 1;
+		id++;
+	}
+
+	return 0;
+}
+
 static int serdev_device_match(struct device *dev, struct device_driver *drv)
 {
+	const struct serdev_device *sdev = to_serdev_device(dev);
+	const struct serdev_device_driver *sdrv = to_serdev_device_driver(drv);
+
 	if (!is_serdev_device(dev))
 		return 0;
 
-	/* TODO: platform matching */
 	if (acpi_driver_match_device(dev, drv))
 		return 1;
 
-	return of_driver_match_device(dev, drv);
+	if (of_driver_match_device(dev, drv))
+		return 1;
+
+	if (sdrv->id_table)
+		return serdev_match_id(sdrv->id_table, sdev);
+
+	return strcmp(sdev->modalias, drv->name) == 0;
 }
 
 /**
@@ -551,6 +580,17 @@ static int of_serdev_register_devices(struct serdev_controller *ctrl)
 	return 0;
 }
 
+struct serdev_controller *of_find_serdev_controller_by_node(struct device_node *node)
+{
+	struct device *dev = bus_find_device_by_of_node(&serdev_bus_type, node);
+
+	if (!dev)
+		return NULL;
+
+	return (dev->type == &serdev_ctrl_type) ? to_serdev_controller(dev) : NULL;
+}
+EXPORT_SYMBOL_GPL(of_find_serdev_controller_by_node);
+
 #ifdef CONFIG_ACPI
 
 #define SERDEV_ACPI_MAX_SCAN_DEPTH 32
@@ -784,6 +824,12 @@ int serdev_controller_add(struct serdev_controller *ctrl)
 
 	pm_runtime_enable(&ctrl->dev);
 
+	/* provide option to not delete a serdev controller without devices
+	 * if property is present
+	 */
+	if (device_property_present(&ctrl->dev, "force-empty-serdev-controller"))
+		return 0;
+
 	ret_of = of_serdev_register_devices(ctrl);
 	ret_acpi = acpi_serdev_register_devices(ctrl);
 	if (ret_of && ret_acpi) {
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 73e5f1dbd..48863c3ad 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -1686,10 +1686,10 @@ static int __init omap8250_console_fixup(void)
 	}
 
 	add_preferred_console("ttyS", idx, options);
-	pr_err("WARNING: Your 'console=ttyO%d' has been replaced by 'ttyS%d'\n",
+	pr_info("WARNING: Your 'console=ttyO%d' has been replaced by 'ttyS%d'\n",
 	       idx, idx);
-	pr_err("This ensures that you still see kernel messages. Please\n");
-	pr_err("update your kernel commandline.\n");
+	pr_info("This ensures that you still see kernel messages. Please\n");
+	pr_info("update your kernel commandline.\n");
 	return 0;
 }
 console_initcall(omap8250_console_fixup);
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 9f116e759..df7e13006 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -563,11 +563,30 @@ static unsigned int serial_icr_read(struct uart_8250_port *up, int offset)
  */
 static void serial8250_clear_fifos(struct uart_8250_port *p)
 {
+	unsigned char fcr;
+	unsigned char clr_mask = UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT;
+
 	if (p->capabilities & UART_CAP_FIFO) {
-		serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO);
-		serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO |
-			       UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
-		serial_out(p, UART_FCR, 0);
+		/*
+		 * Make sure to avoid changing FCR[7:3] and ENABLE_FIFO bits.
+		 * In case ENABLE_FIFO is not set, there is nothing to flush
+		 * so just return. Furthermore, on certain implementations of
+		 * the 8250 core, the FCR[7:3] bits may only be changed under
+		 * specific conditions and changing them if those conditions
+		 * are not met can have nasty side effects. One such core is
+		 * the 8250-omap present in TI AM335x.
+		 */
+		fcr = serial_in(p, UART_FCR);
+
+		/* FIFO is not enabled, there's nothing to clear. */
+		if (!(fcr & UART_FCR_ENABLE_FIFO))
+			return;
+
+		fcr |= clr_mask;
+		serial_out(p, UART_FCR, fcr);
+
+		fcr &= ~clr_mask;
+		serial_out(p, UART_FCR, fcr);
 	}
 }
 
@@ -1471,7 +1490,7 @@ void serial8250_em485_stop_tx(struct uart_8250_port *p)
 	 * Enable previously disabled RX interrupts.
 	 */
 	if (!(p->port.rs485.flags & SER_RS485_RX_DURING_TX)) {
-		serial8250_clear_and_reinit_fifos(p);
+		serial8250_clear_fifos(p);
 
 		p->ier |= UART_IER_RLSI | UART_IER_RDI;
 		serial_port_out(&p->port, UART_IER, p->ier);
diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c
index 63258b6ac..247a067aa 100644
--- a/drivers/uio/uio_pdrv_genirq.c
+++ b/drivers/uio/uio_pdrv_genirq.c
@@ -276,11 +276,13 @@ static const struct dev_pm_ops uio_pdrv_genirq_dev_pm_ops = {
 
 #ifdef CONFIG_OF
 static struct of_device_id uio_of_genirq_match[] = {
+	{ .compatible = "uio" },
+	{ .compatible = "ti,pruss-shmem" },
 	{ /* This is filled with module_parm */ },
 	{ /* Sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, uio_of_genirq_match);
-module_param_string(of_id, uio_of_genirq_match[0].compatible, 128, 0);
+module_param_string(of_id, uio_of_genirq_match[2].compatible, 128, 0);
 MODULE_PARM_DESC(of_id, "Openfirmware id of the device to be handled by uio");
 #endif
 
diff --git a/drivers/uio/uio_pruss.c b/drivers/uio/uio_pruss.c
index e9096f53b..dabc37ed6 100644
--- a/drivers/uio/uio_pruss.c
+++ b/drivers/uio/uio_pruss.c
@@ -26,14 +26,22 @@
 #include <linux/dma-mapping.h>
 #include <linux/sizes.h>
 #include <linux/slab.h>
+#include <linux/of.h>
+#ifdef CONFIG_ARCH_DAVINCI_DA850
 #include <linux/genalloc.h>
+#else
+#include <linux/pm_runtime.h>
+#endif
 
 #define DRV_NAME "pruss_uio"
 #define DRV_VERSION "1.0"
 
+#ifdef CONFIG_ARCH_DAVINCI_DA850
 static int sram_pool_sz = SZ_16K;
 module_param(sram_pool_sz, int, 0);
-MODULE_PARM_DESC(sram_pool_sz, "sram pool size to allocate ");
+MODULE_PARM_DESC(sram_pool_sz, "sram pool size to allocate");
+#endif
+
 
 static int extram_pool_sz = SZ_256K;
 module_param(extram_pool_sz, int, 0);
@@ -61,22 +69,23 @@ MODULE_PARM_DESC(extram_pool_sz, "external ram pool size to allocate");
 #define PINTC_HIER	0x1500
 
 struct uio_pruss_dev {
-	struct uio_info *info;
-	struct clk *pruss_clk;
-	dma_addr_t sram_paddr;
+	struct uio_info info[MAX_PRUSS_EVT];
 	dma_addr_t ddr_paddr;
 	void __iomem *prussio_vaddr;
-	unsigned long sram_vaddr;
 	void *ddr_vaddr;
-	unsigned int hostirq_start;
 	unsigned int pintc_base;
+#ifdef CONFIG_ARCH_DAVINCI_DA850
+	struct clk *pruss_clk;
 	struct gen_pool *sram_pool;
+	dma_addr_t sram_paddr;
+	unsigned long sram_vaddr;
+#endif
 };
 
 static irqreturn_t pruss_handler(int irq, struct uio_info *info)
 {
 	struct uio_pruss_dev *gdev = info->priv;
-	int intr_bit = (irq - gdev->hostirq_start + 2);
+	int intr_bit = 2 + (info - gdev->info);
 	int val, intr_mask = (1 << intr_bit);
 	void __iomem *base = gdev->prussio_vaddr + gdev->pintc_base;
 	void __iomem *intren_reg = base + PINTC_HIER;
@@ -94,53 +103,66 @@ static irqreturn_t pruss_handler(int irq, struct uio_info *info)
 
 static void pruss_cleanup(struct device *dev, struct uio_pruss_dev *gdev)
 {
-	int cnt;
-	struct uio_info *p = gdev->info;
+	int i;
 
-	for (cnt = 0; cnt < MAX_PRUSS_EVT; cnt++, p++) {
-		uio_unregister_device(p);
+	for (i = 0; i < MAX_PRUSS_EVT; i++) {
+		uio_unregister_device(&gdev->info[i]);
+		kfree(gdev->info[i].name);
 	}
 	iounmap(gdev->prussio_vaddr);
 	if (gdev->ddr_vaddr) {
 		dma_free_coherent(dev, extram_pool_sz, gdev->ddr_vaddr,
 			gdev->ddr_paddr);
 	}
+#ifdef CONFIG_ARCH_DAVINCI_DA850
 	if (gdev->sram_vaddr)
 		gen_pool_free(gdev->sram_pool,
 			      gdev->sram_vaddr,
 			      sram_pool_sz);
 	clk_disable(gdev->pruss_clk);
+	clk_put(gdev->pruss_clk);
+#else
+	pm_runtime_put(dev);
+	pm_runtime_disable(dev);
+#endif
+	kfree(gdev);
 }
 
 static int pruss_probe(struct platform_device *pdev)
 {
-	struct uio_info *p;
 	struct uio_pruss_dev *gdev;
 	struct resource *regs_prussio;
 	struct device *dev = &pdev->dev;
-	int ret, cnt, i, len;
+	int ret, i, len;
 	struct uio_pruss_pdata *pdata = dev_get_platdata(dev);
 
-	gdev = devm_kzalloc(dev, sizeof(struct uio_pruss_dev), GFP_KERNEL);
+	gdev = kzalloc(sizeof(struct uio_pruss_dev), GFP_KERNEL);
 	if (!gdev)
 		return -ENOMEM;
 
-	gdev->info = devm_kcalloc(dev, MAX_PRUSS_EVT, sizeof(*p), GFP_KERNEL);
-	if (!gdev->info)
-		return -ENOMEM;
-
+#ifdef CONFIG_ARCH_DAVINCI_DA850
 	/* Power on PRU in case its not done as part of boot-loader */
-	gdev->pruss_clk = devm_clk_get(dev, "pruss");
+	gdev->pruss_clk = clk_get(dev, "pruss");
 	if (IS_ERR(gdev->pruss_clk)) {
 		dev_err(dev, "Failed to get clock\n");
-		return PTR_ERR(gdev->pruss_clk);
+		ret = PTR_ERR(gdev->pruss_clk);
+		goto err_free_gdev;
 	}
 
 	ret = clk_enable(gdev->pruss_clk);
 	if (ret) {
 		dev_err(dev, "Failed to enable clock\n");
-		return ret;
+		goto err_clk_put;
 	}
+#else
+	pm_runtime_enable(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		dev_err(dev, "pm_runtime_get_sync() failed\n");
+		pm_runtime_disable(dev);
+		goto err_free_gdev;
+	}
+#endif
 
 	regs_prussio = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!regs_prussio) {
@@ -155,6 +177,18 @@ static int pruss_probe(struct platform_device *pdev)
 		goto err_clk_disable;
 	}
 
+	if (dev->of_node) {
+		ret = of_property_read_u32(dev->of_node,
+					   "ti,pintc-offset",
+					   &gdev->pintc_base);
+		if (ret < 0) {
+			dev_err(dev, "Can't parse ti,pintc-offset property\n");
+			goto err_clk_disable;
+		}
+	} else
+		gdev->pintc_base = pdata->pintc_base;
+
+#ifdef CONFIG_ARCH_DAVINCI_DA850
 	if (pdata->sram_pool) {
 		gdev->sram_pool = pdata->sram_pool;
 		gdev->sram_vaddr =
@@ -166,9 +200,10 @@ static int pruss_probe(struct platform_device *pdev)
 			goto err_clk_disable;
 		}
 	}
+#endif
 
 	gdev->ddr_vaddr = dma_alloc_coherent(dev, extram_pool_sz,
-				&(gdev->ddr_paddr), GFP_KERNEL | GFP_DMA);
+				&gdev->ddr_paddr, GFP_KERNEL | GFP_DMA);
 	if (!gdev->ddr_vaddr) {
 		dev_err(dev, "Could not allocate external memory\n");
 		ret = -ENOMEM;
@@ -178,56 +213,85 @@ static int pruss_probe(struct platform_device *pdev)
 	len = resource_size(regs_prussio);
 	gdev->prussio_vaddr = ioremap(regs_prussio->start, len);
 	if (!gdev->prussio_vaddr) {
-		dev_err(dev, "Can't remap PRUSS I/O  address range\n");
+		dev_err(dev, "Can't remap PRUSS I/O address range\n");
 		ret = -ENOMEM;
 		goto err_free_ddr_vaddr;
 	}
 
-	gdev->pintc_base = pdata->pintc_base;
-	gdev->hostirq_start = platform_get_irq(pdev, 0);
+	for (i = 0; i < MAX_PRUSS_EVT; i++) {
+		struct uio_info *p = &gdev->info[i];
 
-	for (cnt = 0, p = gdev->info; cnt < MAX_PRUSS_EVT; cnt++, p++) {
+		p->mem[0].name = "pruss";
 		p->mem[0].addr = regs_prussio->start;
 		p->mem[0].size = resource_size(regs_prussio);
 		p->mem[0].memtype = UIO_MEM_PHYS;
 
+		/* note: some userspace code uses hardcoded mem indices... */
+#ifdef CONFIG_ARCH_DAVINCI_DA850
+		p->mem[1].name = "sram";
 		p->mem[1].addr = gdev->sram_paddr;
 		p->mem[1].size = sram_pool_sz;
 		p->mem[1].memtype = UIO_MEM_PHYS;
 
+		p->mem[2].name = "ddr";
 		p->mem[2].addr = gdev->ddr_paddr;
 		p->mem[2].size = extram_pool_sz;
 		p->mem[2].memtype = UIO_MEM_PHYS;
+#else
+		p->mem[1].name = "ddr";
+		p->mem[1].addr = gdev->ddr_paddr;
+		p->mem[1].size = extram_pool_sz;
+		p->mem[1].memtype = UIO_MEM_PHYS;
+#endif
+
+		ret = platform_get_irq(pdev, i);
+		if (ret < 0) {
+			dev_err(dev, "Failed to obtain irq %d (%d)\n", i, ret);
+			goto err_unloop;
+		}
 
-		p->name = devm_kasprintf(dev, GFP_KERNEL, "pruss_evt%d", cnt);
+		p->name = kasprintf(GFP_KERNEL, "pruss_evt%d", i);
 		p->version = DRV_VERSION;
 
 		/* Register PRUSS IRQ lines */
-		p->irq = gdev->hostirq_start + cnt;
+		p->irq = ret;
 		p->handler = pruss_handler;
 		p->priv = gdev;
 
 		ret = uio_register_device(dev, p);
-		if (ret < 0)
+		if (ret < 0) {
+			kfree(p->name);
 			goto err_unloop;
+		}
 	}
 
 	platform_set_drvdata(pdev, gdev);
 	return 0;
 
 err_unloop:
-	for (i = 0, p = gdev->info; i < cnt; i++, p++) {
-		uio_unregister_device(p);
+	while( --i >= 0 ) {
+		uio_unregister_device(&gdev->info[i]);
+		kfree(gdev->info[i].name);
 	}
 	iounmap(gdev->prussio_vaddr);
 err_free_ddr_vaddr:
 	dma_free_coherent(dev, extram_pool_sz, gdev->ddr_vaddr,
 			  gdev->ddr_paddr);
 err_free_sram:
+#ifdef CONFIG_ARCH_DAVINCI_DA850
 	if (pdata->sram_pool)
 		gen_pool_free(gdev->sram_pool, gdev->sram_vaddr, sram_pool_sz);
 err_clk_disable:
 	clk_disable(gdev->pruss_clk);
+err_clk_put:
+	clk_put(gdev->pruss_clk);
+#else
+err_clk_disable:
+	pm_runtime_put(dev);
+	pm_runtime_disable(dev);
+#endif
+err_free_gdev:
+	kfree(gdev);
 
 	return ret;
 }
@@ -240,11 +304,19 @@ static int pruss_remove(struct platform_device *dev)
 	return 0;
 }
 
+static const struct of_device_id pruss_dt_ids[] = {
+	{ .compatible = "ti,pruss-v1" },
+	{ .compatible = "ti,pruss-v2" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, pruss_dt_ids);
+
 static struct platform_driver pruss_driver = {
 	.probe = pruss_probe,
 	.remove = pruss_remove,
 	.driver = {
 		   .name = DRV_NAME,
+		   .of_match_table = pruss_dt_ids,
 		   },
 };
 
diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h
index f48245ff8..625718042 100644
--- a/include/dt-bindings/pinctrl/omap.h
+++ b/include/dt-bindings/pinctrl/omap.h
@@ -64,8 +64,8 @@
 #define OMAP3_WKUP_IOPAD(pa, val)	OMAP_IOPAD_OFFSET((pa), 0x2a00) (val)
 #define DM814X_IOPAD(pa, val)		OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
 #define DM816X_IOPAD(pa, val)		OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
-#define AM33XX_IOPAD(pa, val)		OMAP_IOPAD_OFFSET((pa), 0x0800) (val) (0)
-#define AM33XX_PADCONF(pa, conf, mux)	OMAP_IOPAD_OFFSET((pa), 0x0800) (conf) (mux)
+#define AM33XX_IOPAD(pa, val)		OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
+#define AM33XX_PADCONF(pa, dir, mux)	OMAP_IOPAD_OFFSET((pa), 0x0800) ((dir) | (mux))
 
 /*
  * Macros to allow using the offset from the padconf physical address
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 4bb71979a..1bf41b784 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -493,6 +493,16 @@ struct i3c_device_id {
 	const void *data;
 };
 
+/* serdev */
+
+#define SERDEV_NAME_SIZE	32
+#define SERDEV_MODULE_PREFIX	"serdev:"
+
+struct serdev_device_id {
+	char name[SERDEV_NAME_SIZE];
+	kernel_ulong_t driver_data;
+};
+
 /* spi */
 
 #define SPI_NAME_SIZE	32
diff --git a/include/linux/serdev.h b/include/linux/serdev.h
index 3368c261a..c8e45a297 100644
--- a/include/linux/serdev.h
+++ b/include/linux/serdev.h
@@ -7,6 +7,7 @@
 
 #include <linux/types.h>
 #include <linux/device.h>
+#include <linux/mod_devicetable.h>
 #include <linux/termios.h>
 #include <linux/delay.h>
 
@@ -45,6 +46,7 @@ struct serdev_device {
 	const struct serdev_device_ops *ops;
 	struct completion write_comp;
 	struct mutex write_lock;
+	char modalias[SERDEV_NAME_SIZE];
 };
 
 static inline struct serdev_device *to_serdev_device(struct device *d)
@@ -63,6 +65,7 @@ struct serdev_device_driver {
 	struct device_driver driver;
 	int	(*probe)(struct serdev_device *);
 	void	(*remove)(struct serdev_device *);
+	const struct serdev_device_id *id_table;
 };
 
 static inline struct serdev_device_driver *to_serdev_device_driver(struct device_driver *d)
@@ -112,6 +115,8 @@ static inline struct serdev_controller *to_serdev_controller(struct device *d)
 	return container_of(d, struct serdev_controller, dev);
 }
 
+struct serdev_controller *of_find_serdev_controller_by_node(struct device_node *node);
+
 static inline void *serdev_device_get_drvdata(const struct serdev_device *serdev)
 {
 	return dev_get_drvdata(&serdev->dev);
diff --git a/scripts/Makefile.dtbinst b/scripts/Makefile.dtbinst
index 190d781e8..84c46c081 100644
--- a/scripts/Makefile.dtbinst
+++ b/scripts/Makefile.dtbinst
@@ -18,9 +18,10 @@ include $(srctree)/scripts/Kbuild.include
 include $(src)/Makefile
 
 dtbs    := $(addprefix $(dst)/, $(dtb-y) $(if $(CONFIG_OF_ALL_DTBS),$(dtb-)))
+dtbos   := $(addprefix $(dst)/, $(dtbo-y) $(if $(CONFIG_OF_ALL_DTBS),$(dtb-)))
 subdirs := $(addprefix $(obj)/, $(subdir-y) $(subdir-m))
 
-__dtbs_install: $(dtbs) $(subdirs)
+__dtbs_install: $(dtbs) $(dtbos) $(subdirs)
 	@:
 
 quiet_cmd_dtb_install = INSTALL $@
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 79be57fdd..5b18077aa 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -377,6 +377,24 @@ endef
 $(obj)/%.dt.yaml: $(src)/%.dts $(DTC) $(DT_TMP_SCHEMA) FORCE
 	$(call if_changed_rule,dtc)
 
+quiet_cmd_dtco = DTCO    $@
+cmd_dtco = mkdir -p $(dir ${dtc-tmp}) ; \
+	$(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
+	$(DTC) -@ -H epapr -O dtb -o $@ -b 0 \
+		-i $(dir $<) $(DTC_FLAGS) \
+		-Wno-interrupts_property \
+		-Wno-label_is_string \
+		-Wno-reg_format \
+		-Wno-pci_device_bus_num \
+		-Wno-i2c_bus_reg \
+		-Wno-spi_bus_reg \
+		-Wno-avoid_default_addr_size \
+		-d $(depfile).dtc.tmp $(dtc-tmp) ; \
+	cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
+
+$(obj)/%.dtbo: $(src)/%.dts FORCE
+	$(call if_changed_dep,dtco)
+
 dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
 
 # Bzip2
diff --git a/scripts/mod/devicetable-offsets.c b/scripts/mod/devicetable-offsets.c
index c0d3bcb99..59c3ba467 100644
--- a/scripts/mod/devicetable-offsets.c
+++ b/scripts/mod/devicetable-offsets.c
@@ -153,6 +153,9 @@ int main(void)
 	DEVID_FIELD(i3c_device_id, part_id);
 	DEVID_FIELD(i3c_device_id, extra_info);
 
+	DEVID(serdev_device_id);
+	DEVID_FIELD(serdev_device_id, name);
+
 	DEVID(spi_device_id);
 	DEVID_FIELD(spi_device_id, name);
 
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 5258247d7..358178121 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -971,6 +971,15 @@ static int do_spi_entry(const char *filename, void *symval,
 	return 1;
 }
 
+static int do_serdev_entry(const char *filename, void *symval,
+			   char *alias)
+{
+	DEF_FIELD_ADDR(symval, serdev_device_id, name);
+	sprintf(alias, SERDEV_MODULE_PREFIX "%s", *name);
+
+	return 1;
+}
+
 static const struct dmifield {
 	const char *prefix;
 	int field;
@@ -1497,6 +1506,7 @@ static const struct devtable devtable[] = {
 	{"rpmsg", SIZE_rpmsg_device_id, do_rpmsg_entry},
 	{"i2c", SIZE_i2c_device_id, do_i2c_entry},
 	{"i3c", SIZE_i3c_device_id, do_i3c_entry},
+	{"serdev", SIZE_serdev_device_id, do_serdev_entry},
 	{"spi", SIZE_spi_device_id, do_spi_entry},
 	{"dmi", SIZE_dmi_system_id, do_dmi_entry},
 	{"platform", SIZE_platform_device_id, do_platform_entry},
diff --git a/scripts/package/builddeb b/scripts/package/builddeb
index ad30ece31..d9eeaccef 100755
--- a/scripts/package/builddeb
+++ b/scripts/package/builddeb
@@ -153,6 +153,7 @@ if is_enabled CONFIG_OF_EARLY_FLATTREE; then
 	# Only some architectures with OF support have this target
 	if [ -d "${srctree}/arch/$SRCARCH/boot/dts" ]; then
 		$MAKE -f $srctree/Makefile INSTALL_DTBS_PATH="$tmpdir/usr/lib/$packagename" dtbs_install
+		$MAKE -f $srctree/Makefile INSTALL_DTBS_PATH="$tmpdir/boot/dtbs/$version" dtbs_install
 	fi
 fi